The old code would += the total errors every time
stats were gathered.  Instead, keep a count of short-pkt
and long-pkt counters and then simply add them together
for the rx-over-length stat.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Conflicts:
	drivers/net/ethernet/broadcom/tg3.c

Conflicts in the statistics regression bug fix from 'net',
but happily Matt Carlson originally posted the fix against
'net-next' so I used that to resolve this.
Signed-off-by: David S. Miller <davem@davemloft.net>

"num_vfs" is a u32 but we only use the high 16 bits and the low 16bits
are left as zero.  That isn't a problem for little endian systems but it
will break on big endian ones.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

pch_gbe_validate_option() modifies 32 bits of memory but we pass
&hw->phy.autoneg_advertised which only has 16 bits and &hw->mac.fc
which only has 8 bits.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add comments for ethtool_cmd::phy_address and
ethtool_cmd::mdio_support, and definitions of the flags currently
used in mdio_support.

In the mdio library, assert that its own flags continue to match those
in the ethtool interface.

In the mii library, use the ethtool flag definition and stop
including <linux/mdio.h>.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ID packing definitions are needed by userland and the register
definitions may also be useful there.

Do not export mdio_phy_id_{is_c45,prtad,devad}() as the use of bool is
problematic and it's not that useful to export only a subset of these.

Do not export MDIO_SUPPORTS_{C22,C45} directly; these flags are only
exposed to userland through struct ethtool_cmd so they should be
defined alongside that with appropriate names.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add VF spoof check to IFLA policy.  The original patch I submitted to
add the spoof checking feature to rtnl failed to add the proper policy
rule that identifies the data type and len.  This patch corrects that
oversight.  No bugs have been reported against this but it may cause
some problem for the netlink message parsing that uses the policy
table.

CC: stable@vger.kernel.org
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch corrects several comments that are either incorrect or formatted
incorrectly for multiline comments.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Correct spelling error caught with codespell.py.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch is meant to address several minor issues in
ixgbe_xmit_frame_ring.  Specifically it adds a comment explaining the TXSW
flag, and correctly wraps a line over 80 characters.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The e1000_link_stall_workaround_lv() function is always called in non-
atomic context so it should use msleep instead of mdelay.  Also, remove
unnecessary #include <linux/delay.h>.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This allows the NIC to receive packets with bad FCS
and other errors.  Good for sniffing packets on flakey
networks.

v4:  Only flax rx-over-length errors if pkt is beyond
   maximum expected packet size, not just beyond the MTU.
   This matches the existing logic for this counter.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This can aid with testing the RX logic for bad
CRCs.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This allows e100 to be configured to append the
Ethernet FCS to the skb.

Useful for sniffing networks.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

tg3_get_stats64() takes tp->lock when dealing with non-serdes bcm5700
and bcm5701 devices.  However, functions that call tg3_halt() have
already acquired tp->lock.  When tg3_get_stats64() is called in
tg3_halt(), deadlock will occur.

This patch fixes the problem by separating the stat gathering code into
a new tg3_get_nstats() function.  tg3_get_stats64() is recoded to call
this function and take tp->lock.  The code that takes tp->lock in
tg3_calc_crc_errors() has been removed.  Function signatures have been
cleaned up too.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Optimizes routines that send payload messages so that they no longer
update the "originating node" and "originating port" fields of the
outgoing message header template, since these fields are initialized
when the sending port is created and never change thereafter. Also
optimizes the routine which updates the message header template when
a connection to a port is established, for the same reason.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

Removes code that updated the "previous node" field of an out-going
message over TIPC's links. Such updating is unnecessary since the
removal of the prototype multi-cluster capability means that all
outgoing messages are generated locally and already have this field
populated correctly.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

Converts a non-trivial routine from inline to non-inline form
to avoid bloating the TIPC code base with 6 copies of its body.

This change is essentially cosmetic, and doesn't change existing
TIPC behavior.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

Need to use the new 'saddr' variable not the void 'addr' in
set_mac_address().
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When tcp_shifted_skb() shifts bytes from the skb that is currently
pointed to by 'highest_sack' then the increment of
TCP_SKB_CB(skb)->seq implicitly advances tcp_highest_sack_seq(). This
implicit advancement, combined with the recent fix to pass the correct
SACKed range into tcp_sacktag_one(), caused tcp_sacktag_one() to think
that the newly SACKed range was before the tcp_highest_sack_seq(),
leading to a call to tcp_update_reordering() with a degree of
reordering matching the size of the newly SACKed range (typically just
1 packet, which is a NOP, but potentially larger).

This commit fixes this by simply calling tcp_sacktag_one() before the
TCP_SKB_CB(skb)->seq advancement that can advance our notion of the
highest SACKed sequence.

Correspondingly, we can simplify the code a little now that
tcp_shifted_skb() should update the lost_cnt_hint in all cases where
skb == tp->lost_skb_hint.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There was an off-by-one error in the comments describing the
highest_sack field in struct tcp_sock. The comments previously claimed
that it was the "start sequence of the highest skb with SACKed
bit". This commit fixes the comments to note that it is the "start
sequence of the skb just *after* the highest skb with SACKed bit".
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

Commas are not generally used at locations where
statement termination semicolons are used.

Realign each field set at appropriate indentation.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

Conflicts:
	drivers/net/ethernet/sfc/rx.c

Overlapping changes in drivers/net/ethernet/sfc/rx.c, one to change
the rx_buf->is_page boolean into a set of u16 flags, and another to
adjust how ->ip_summed is initialized.
Signed-off-by: David S. Miller <davem@davemloft.net>

1) ICMP sockets leave err uninitialized but we try to return it for the
   unsupported MSG_OOB case, reported by Dave Jones.

2) Add new Zaurus device ID entries, from Dave Jones.

3) Pointer calculation in hso driver memset is wrong, from Dan
   Carpenter.

4) ks8851_probe() checks unsigned value as negative, fix also from Dan
   Carpenter.

5) Fix crashes in atl1c driver due to TX queue handling, from Eric
   Dumazet.  I anticipate some TX side locking fixes coming in the near
   future for this driver as well.

6) The inline directive fix in Bluetooth which was breaking the build
   only with very new versions of GCC, from Johan Hedberg.

7) Fix crashes in the ATP CLIP code due to ARP cleanups this merge
   window, reported by Meelis Roos and fixed by Eric Dumazet.

8) JME driver doesn't flush RX FIFO correctly, from Guo-Fu Tseng.

9) Some ip6_route_output() callers test the return value for NULL, but
   this never happens as the convention is to return a dst entry with
   dst->error set.  Fixes from RonQing Li.

10) Logitech Harmony 900 should be handled by zaurus driver not
   cdc_ether, update white lists and black lists accordingly.  From
   Scott Talbert.

11) Receiving from certain kinds of devices there won't be a MAC header,
   so there is no MAC header to fixup in the IPSEC code, and if we try
   to do it we'll crash.  Fix from Eric Dumazet.

12) Port type array indexing off-by-one in mlx4 driver, fix from Yevgeny
   Petrilin.

13) Fix regression in link-down handling in davinci_emac which causes
   all RX descriptors to be freed up and therefore RX to wedge
   completely, from Christian Riesch.

14) It took two attempts, but ctnetlink soft lockups seem to be
   cured now, from Pablo Neira Ayuso.

15) Endianness bug fix in ENIC driver, from Santosh Nayak.

16) The long ago conversion of the PPP fragmentation code over to
   abstracted SKB list handling wasn't perfect, once we get an
   out of sequence SKB we don't flush the rest of them like we
   should.  From Ben McKeegan.

17) Fix regression of ->ip_summed initialization in sfc driver.
   From Ben Hutchings.

18) Bluetooth timeout mistakenly using msecs instead of jiffies,
   from Andrzej Kaczmarek.

19) Using _sync variant of work cancellation results in deadlocks,
   use the non _sync variants instead.  From Andre Guedes.

20) Bluetooth rfcomm code had reference counting problems leading
   to crashes, fix from Octavian Purdila.

21) The conversion of netem over to classful qdisc handling added
   two bugs to netem_dequeue(), fixes from Eric Dumazet.

22) Missing pci_iounmap() in ATM Solos driver.  Fix from Julia Lawall.

23) b44_pci_exit() should not have __exit tag since it's invoked from
   non-__exit code.  From Nikola Pajkovsky.

24) The conversion of the neighbour hash tables over to RCU added a
   race, fixed here by adding the necessary reread of tbl->nht, fix
   from Michel Machado.

25) When we added VF (virtual function) attributes for network device
   dumps, this potentially bloats up the size of the dump of one
   network device such that the dump size is too large for the buffer
   allocated by properly written netlink applications.

   In particular, if you add 255 VFs to a network device, parts of
   GLIBC stop working.

   To fix this, we add an attribute that is used to turn on these
   extended portions of the network device dump.  Sophisticaed
   applications like 'ip' that want to see this stuff  will be changed
   to set the attribute, whereas things like GLIBC that don't care
   about VFs simply will not, and therefore won't be busted by the
   mere presence of VFs on a network device.

   Thanks to the tireless work of Greg Rose on this fix.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (53 commits)
  sfc: Fix assignment of ip_summed for pre-allocated skbs
  ppp: fix 'ppp_mp_reconstruct bad seq' errors
  enic: Fix endianness bug.
  gre: fix spelling in comments
  netfilter: ctnetlink: fix soft lockup when netlink adds new entries (v2)
  Revert "netfilter: ctnetlink: fix soft lockup when netlink adds new entries"
  davinci_emac: Do not free all rx dma descriptors during init
  mlx4_core: Fixing array indexes when setting port types
  phy: IC+101G and PHY_HAS_INTERRUPT flag
  netdev/phy/icplus: Correct broken phy_init code
  ipsec: be careful of non existing mac headers
  Move Logitech Harmony 900 from cdc_ether to zaurus
  hso: memsetting wrong data in hso_get_count()
  netfilter: ip6_route_output() never returns NULL.
  ethernet/broadcom: ip6_route_output() never returns NULL.
  ipv6: ip6_route_output() never returns NULL.
  jme: Fix FIFO flush issue
  atm: clip: remove clip_tbl
  ipv4: ping: Fix recvmsg MSG_OOB error handling.
  rtnetlink: Fix problem with buffer allocation
  ...

A driver xmit function is not allowed to change skb without special
care.

mlx4_en_xmit() should not call skb_reset_mac_header() and instead should
use skb->data to access ethernet header.

This removes a dumb test : if (ethh && ethh->h_dest)

Also remove this slow mlx4_en_mac_to_u64() call, we can use
get_unaligned() to get faster code.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds CTA_MARK_MASK which, together with CTA_MARK, allows
you to selectively send conntrack entries to user-space by
returning those that match mark & mask.

With this, we can save cycles in the building and the parsing of
the entries that may be later on filtered out in user-space by using
the ctmark & mask.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch allows you to pass a data pointer that can be
accessed from the dump callback.

Netfilter is going to use this patch to provide filtered dumps
to user-space. This is specifically interesting in ctnetlink that
may handle lots of conntrack entries. We can save precious
cycles by skipping the conversion to TLV format of conntrack
entries that are not interesting for user-space.

More specifically, ctnetlink will include one operation to allow
to filter the dumping of conntrack entries by ctmark values.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Davem considers that the argument list of this interface is getting
out of control. This patch tries to address this issue following
his proposal:

struct netlink_dump_control c = { .dump = dump, .done = done, ... };

netlink_dump_start(..., &c);

Suggested by David S. Miller.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The autofs compat handling fix caused a compile failure when
CONFIG_COMPAT isn't defined.

Instead of adding random #ifdef'fery in autofs, let's just make the
compat helpers earlier to use: without CONFIG_COMPAT, is_compat_task()
just hardcodes to zero.

We could probably do something similar for a number of other cases where
we have #ifdef's in code, but this is the low-hanging fruit.
Reported-and-tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The patch removes unneeded method typedef declaration (icv_update_fn_t
) and the two struct declarations which appear in its prototype
(struct hash_desc and struct scatterlist) in net/xfrm.h.
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>