We can always find the sink configuration for a given perf_output_handle.
Add a helper to retrieve the sink configuration for a given
perf_output_handle. This will be used to get rid of the set_buffer()
call back.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Right now we issue an update_buffer() and reset_buffer() call backs
in succession when we stop tracing an event. The update_buffer is
supposed to check the status of the buffer and make sure the ring buffer
is updated with the trace data. And we store information about the
size of the data collected only to be consumed by the reset_buffer
callback which always follows the update_buffer. This was originally
designed for handling future IPs which could trigger a buffer overflow
interrupt. This patch gets rid of the reset_buffer callback altogether
and performs the actions in update_buffer, making it return the size
collected. We can always add the support for handling the overflow
interrupt case later.

This removes some not-so pretty hack (storing the new head in the
size field for snapshot mode) and cleans it up a little bit.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert component enable/disable messages from dev_info to dev_dbg.
When used with perf, the components in the paths are enabled/disabled
during each schedule of the run, which can flood the dmesg with these
messages. Moreover, they are only useful for debug purposes. So,
convert such messages to dev_dbg() which can be turned on as
needed.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since the ETR now uses mode specific buffers, we can reliably
provide the trace data captured in sysfs mode, even when the ETR
is operating in PERF mode.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since the ETR could be driven either by SYSFS or by perf, it
becomes complicated how we deal with the buffers used for each
of these modes. The ETR driver cannot simply free the current
attached buffer without knowing the provider (i.e, sysfs vs perf).

To solve this issue, we provide:
1) the driver-mode specific etr buffer to be retained in the drvdata
2) the etr_buf for a session should be passed on when enabling the
   hardware, which will be stored in drvdata->etr_buf. This will be
   replaced (not free'd) as soon as the hardware is disabled, after
   necessary sync operation.

The advantages of this are :

1) The common code path doesn't need to worry about how to dispose
   an existing buffer, if it is about to start a new session with a
   different buffer, possibly in a different mode.
2) The driver mode can control its buffers and can get access to the
   saved session even when the hardware is operating in a different
   mode. (e.g, we can still access a trace buffer from a sysfs mode
   even if the etr is now used in perf mode, without disrupting the
   current session.)

Towards this, we introduce a sysfs specific data which will hold the
etr_buf used for sysfs mode of operation, controlled solely by the
sysfs mode handling code.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We enable the trace path, before activating the source.
If we fail to enable the source, we must disable the path
to make sure it is available for another session.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

At the moment, if there is no CPU specified for a given
event, we use cpu_online_mask and try to build path for
each of the CPUs in the mask. This could prevent any CPU
that is turned online later to be used for the tracing.

This patch changes to use the cpu_present_mask and tries
to build path for as much CPUs as possible ignoring the
failures in building path for some of the CPUs. If ever
we try to trace on those CPUs, we fail the operation.

Based on a patch from Mathieu Poirier.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We hold the read lock on CPU hotplug to simply copy the
online mask, which is not really needed. And this can
cause a lockdep warning, like :

[   54.632093] ======================================================
[   54.638207] WARNING: possible circular locking dependency detected
[   54.644322] 4.18.0-rc3-00042-g2d39e6356bb7-dirty #309 Not tainted
[   54.650350] ------------------------------------------------------
[   54.656464] perf/2862 is trying to acquire lock:
[   54.661031] 000000007e21d170 (&event->mmap_mutex){+.+.}, at: perf_event_set_output+0x98/0x138
[   54.669486]
[   54.669486] but task is already holding lock:
[   54.675256] 000000001080eb1b (&cpuctx_mutex){+.+.}, at: perf_event_ctx_lock_nested+0xf8/0x1f0
[   54.683704]
[   54.683704] which lock already depends on the new lock.
[   54.683704]
[   54.691797]
[   54.691797] the existing dependency chain (in reverse order) is:
[   54.699201]
[   54.699201] -> #3 (&cpuctx_mutex){+.+.}:
[   54.704556]        __mutex_lock+0x70/0x808
[   54.708608]        mutex_lock_nested+0x1c/0x28
[   54.713005]        perf_event_init_cpu+0x8c/0xd8
[   54.717574]        perf_event_init+0x194/0x1d4
[   54.721971]        start_kernel+0x2b8/0x42c
[   54.726107]
[   54.726107] -> #2 (pmus_lock){+.+.}:
[   54.731114]        __mutex_lock+0x70/0x808
[   54.735165]        mutex_lock_nested+0x1c/0x28
[   54.739560]        perf_event_init_cpu+0x30/0xd8
[   54.744129]        cpuhp_invoke_callback+0x84/0x248
[   54.748954]        _cpu_up+0xe8/0x1c8
[   54.752576]        do_cpu_up+0xa8/0xc8
[   54.756283]        cpu_up+0x10/0x18
[   54.759731]        smp_init+0xa0/0x114
[   54.763438]        kernel_init_freeable+0x120/0x288
[   54.768264]        kernel_init+0x10/0x108
[   54.772230]        ret_from_fork+0x10/0x18
[   54.776279]
[   54.776279] -> #1 (cpu_hotplug_lock.rw_sem){++++}:
[   54.782492]        cpus_read_lock+0x34/0xb0
[   54.786631]        etm_setup_aux+0x5c/0x308
[   54.790769]        rb_alloc_aux+0x1ec/0x300
[   54.794906]        perf_mmap+0x284/0x610
[   54.798787]        mmap_region+0x388/0x570
[   54.802838]        do_mmap+0x344/0x4f8
[   54.806544]        vm_mmap_pgoff+0xe4/0x110
[   54.810682]        ksys_mmap_pgoff+0xa8/0x240
[   54.814992]        sys_mmap+0x18/0x28
[   54.818613]        el0_svc_naked+0x30/0x34
[   54.822661]
[   54.822661] -> #0 (&event->mmap_mutex){+.+.}:
[   54.828445]        lock_acquire+0x48/0x68
[   54.832409]        __mutex_lock+0x70/0x808
[   54.836459]        mutex_lock_nested+0x1c/0x28
[   54.840855]        perf_event_set_output+0x98/0x138
[   54.845680]        _perf_ioctl+0x2a0/0x6a0
[   54.849731]        perf_ioctl+0x3c/0x68
[   54.853526]        do_vfs_ioctl+0xb8/0xa20
[   54.857577]        ksys_ioctl+0x80/0xb8
[   54.861370]        sys_ioctl+0xc/0x18
[   54.864990]        el0_svc_naked+0x30/0x34
[   54.869039]
[   54.869039] other info that might help us debug this:
[   54.869039]
[   54.876960] Chain exists of:
[   54.876960]   &event->mmap_mutex --> pmus_lock --> &cpuctx_mutex
[   54.876960]
[   54.887217]  Possible unsafe locking scenario:
[   54.887217]
[   54.893073]        CPU0                    CPU1
[   54.897552]        ----                    ----
[   54.902030]   lock(&cpuctx_mutex);
[   54.905396]                                lock(pmus_lock);
[   54.910911]                                lock(&cpuctx_mutex);
[   54.916770]   lock(&event->mmap_mutex);
[   54.920566]
[   54.920566]  *** DEADLOCK ***
[   54.920566]
[   54.926424] 1 lock held by perf/2862:
[   54.930042]  #0: 000000001080eb1b (&cpuctx_mutex){+.+.}, at: perf_event_ctx_lock_nested+0xf8/0x1f0

Since we have per-cpu array for the paths, we simply don't care about
the number of online CPUs. This patch gets rid of the
{get/put}_online_cpus().
Reported-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We create a coresight trace path for each online CPU when
we start the event. We rely on the number of online CPUs
and then go on to allocate an array matching the "number of
online CPUs" for holding the path and then uses normal
CPU id as the index to the array. This is problematic as
we could have some offline CPUs causing us to access beyond
the actual array size (e.g, on a dual SMP system, if CPU0 is
offline, CPU1 could be really accessing beyond the array).
The solution is to switch to per-cpu array for holding the path.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If the ETB is already enabled in sysfs mode, the ETB reports
success even if a perf mode is requested. Fix this by checking
the requested mode.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The coresight components could be operated either in sysfs mode or in perf
mode. For some of the components, the mode of operation doesn't matter as
they simply relay the data to the next component in the trace path. But for
sinks, they need to be able to provide the trace data back to the user.
Thus we need to make sure that "mode" is handled appropriately. e.g,
the sysfs mode could have multiple sources driving the trace data, while
perf mode doesn't allow sharing the sink.

The coresight_enable_sink() however doesn't really allow this check to
trigger as it skips the "enable_sink" callback if the component is
already enabled, irrespective of the mode. This could cause mixing
of data from different modes or even same mode (in perf), if the
sources are different. Also, if we fail to enable the sink while
enabling a path (where sink is the first component enabled),
we could end up in disabling the components in the "entire"
path which were not enabled in this trial, causing disruptions
in the existing trace paths.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use ERR_CAT inlined function to replace the ERR_PTR(PTR_ERR). It
make the code more concise.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The coresight drivers relied on default bindings for graph
in DT, while reusing the "reg" field of the "ports" to indicate
the actual hardware port number for the connections. This can
cause duplicate ports with same addresses, but different
direction. However, with the rules getting stricter for the
address mismatch with the label, it is no longer possible to use
the port address field for the hardware port number.

This patch introduces new DT binding rules for coresight
components, based on the same generic DT graph bindings, but
avoiding the address duplication.

- All output ports must be specified under a child node with
  name "out-ports".
- All input ports must be specified under a childe node with
  name "in-ports".
- Port address should match the hardware port number.

The support for legacy bindings is retained, with a warning.

Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The platform code parses the component connections and populates
a platform-description of the output connections in arrays of fields
(which is never freed). This is later copied in the coresight_register
to a newly allocated area, represented by coresight_connection(s).

This patch cleans up the code dealing with connections by making
use of the "coresight_connection" structure right at the platform
code and lets the generic driver simply re-use information provided
by the platform.

Thus making it reader friendly as well as avoiding the wastage of
unused memory.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a helper to check if the given endpoint is input.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When parsing the remote endpoint of an output port, we do :
     rport = of_graph_get_remote_port(ep);
     rparent = of_graph_get_remote_port_parent(ep);

and then parse the "remote_port" as if it was the remote endpoint,
which is wrong. The code worked fine because we used endpoint number
as the port number. Let us fix it and optimise a bit as:

     remote_ep = of_graph_get_remote_endpoint(ep);
     if (remote_ep)
        remote_parent = of_graph_get_port_parent(remote_ep);

and then, parse the remote_ep for the port/endpoint details.
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We don't drop the reference on the remote device while parsing the
connection, held by bus_find_device(). Fix this by duplicating the
device name and dropping the reference.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The coresight driver doesn't drop the references on the
remote endpoint/port nodes. Add the missing of_node_put()
calls.
Reported-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Refactor the of graph endpoint parsing code, to make the error
handling easier.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6403587a930c ("coresight: use put_device() instead of kfree()")
fixes the double freeing of resources and ensures that the device
refcount is dropped properly. Add a comment to explain this to
help the readers and prevent people trying to "unfix" it again.

While at it, rename the labels for better readability.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace "fallthru" with a proper "fall through" annotation.

This fix is part of the ongoing efforts to enabling
-Wimplicit-fallthrough
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Dimitri Sivanich <sivanich@hpe.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We want the bugfixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Code of Conflict is not achieving its implicit goal of fostering
civility and the spirit of 'be excellent to each other'.  Explicit
guidelines have demonstrated success in other projects and other areas
of the kernel.

Here is a Code of Conduct statement for the wider kernel.  It is based
on the Contributor Covenant as described at www.contributor-covenant.org

From this point forward, we should abide by these rules in order to help
make the kernel community a welcoming environment to participate in.
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Olof Johansson <olof@lxom.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull x86 fixes from Ingol Molnar:
 "Misc fixes:

   - EFI crash fix

   - Xen PV fixes

   - do not allow PTI on 2-level 32-bit kernels for now

   - documentation fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/APM: Fix build warning when PROC_FS is not enabled
  Revert "x86/mm/legacy: Populate the user page-table with user pgd's"
  x86/efi: Load fixmap GDT in efi_call_phys_epilog() before setting %cr3
  x86/xen: Disable CPU0 hotplug for Xen PV
  x86/EISA: Don't probe EISA bus for Xen PV guests
  x86/doc: Fix Documentation/x86/earlyprintk.txt

Pull scheduler fixes from Ingo Molnar:
 "Misc fixes: various scheduler metrics corner case fixes, a
  sched_features deadlock fix, and a topology fix for certain NUMA
  systems"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix kernel-doc notation warning
  sched/fair: Fix load_balance redo for !imbalance
  sched/fair: Fix scale_rt_capacity() for SMT
  sched/fair: Fix vruntime_normalized() for remote non-migration wakeup
  sched/pelt: Fix update_blocked_averages() for RT and DL classes
  sched/topology: Set correct NUMA topology type
  sched/debug: Fix potential deadlock when writing to sched_features

Pull perf fixes from Ingo Molnar:
 "Mostly tooling fixes, but also breakpoint and x86 PMU driver fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  perf tools: Fix maps__find_symbol_by_name()
  tools headers uapi: Update tools's copy of linux/if_link.h
  tools headers uapi: Update tools's copy of linux/vhost.h
  tools headers uapi: Update tools's copies of kvm headers
  tools headers uapi: Update tools's copy of drm/drm.h
  tools headers uapi: Update tools's copy of asm-generic/unistd.h
  tools headers uapi: Update tools's copy of linux/perf_event.h
  perf/core: Force USER_DS when recording user stack data
  perf/UAPI: Clearly mark __PERF_SAMPLE_CALLCHAIN_EARLY as internal use
  perf/x86/intel: Add support/quirk for the MISPREDICT bit on Knights Landing CPUs
  perf annotate: Fix parsing aarch64 branch instructions after objdump update
  perf probe powerpc: Ignore SyS symbols irrespective of endianness
  perf event-parse: Use fixed size string for comms
  perf util: Fix bad memory access in trace info.
  perf tools: Streamline bpf examples and headers installation
  perf evsel: Fix potential null pointer dereference in perf_evsel__new_idx()
  perf arm64: Fix include path for asm-generic/unistd.h
  perf/hw_breakpoint: Simplify breakpoint enable in perf_event_modify_breakpoint
  perf/hw_breakpoint: Enable breakpoint in modify_user_hw_breakpoint
  perf/hw_breakpoint: Remove superfluous bp->attr.disabled = 0
  ...

Pull locking fixes from Ingo Molnar:
 "Misc fixes: liblockdep fixes and ww_mutex fixes"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/ww_mutex: Fix spelling mistake "cylic" -> "cyclic"
  locking/lockdep: Delete unnecessary #include
  tools/lib/lockdep: Add dummy task_struct state member
  tools/lib/lockdep: Add empty nmi.h
  tools/lib/lockdep: Update Sasha Levin email to MSFT
  jump_label: Fix typo in warning message
  locking/mutex: Fix mutex debug call and ww_mutex documentation

Fix build warning in apm_32.c when CONFIG_PROC_FS is not enabled:

../arch/x86/kernel/apm_32.c:1643:12: warning: 'proc_apm_show' defined but not used [-Wunused-function]
 static int proc_apm_show(struct seq_file *m, void *v)

Fixes: 3f3942ac ("proc: introduce proc_create_single{,_data}")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jiri Kosina <jikos@kernel.org>
Link: https://lkml.kernel.org/r/be39ac12-44c2-4715-247f-4dcc3c525b8b@infradead.org

Pull cifs fixes from Steve French:
 "Fixes for four CIFS/SMB3 potential pointer overflow issues, one minor
  build fix, and a build warning cleanup"

* tag '4.19-rc3-smb3-cifs' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: read overflow in is_valid_oplock_break()
  cifs: integer overflow in in SMB2_ioctl()
  CIFS: fix wrapping bugs in num_entries()
  cifs: prevent integer overflow in nxt_dir_entry()
  fs/cifs: require sha512
  fs/cifs: suppress a string overflow warning

Pull NFS client bugfixes from Anna Schumaker:
 "These are a handful of fixes for problems that Trond found. Patch #1
  and #3 have the same name, a second issue was found after applying the
  first patch.

  Stable bugfixes:
   - v4.17+: Fix tracepoint Oops in initiate_file_draining()
   - v4.11+: Fix an infinite loop on I/O

  Other fixes:
   - Return errors if a waiting layoutget is killed
   - Don't open code clearing of delegation state"

* tag 'nfs-for-4.19-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFS: Don't open code clearing of delegation state
  NFSv4.1 fix infinite loop on I/O.
  NFSv4: Fix a tracepoint Oops in initiate_file_draining()
  pNFS: Ensure we return the error if someone kills a waiting layoutget
  NFSv4: Fix a tracepoint Oops in initiate_file_draining()

Pull tracing fix from Steven Rostedt:
 "This fixes an issue with the build system caused by a change that
  modifies CC_FLAGS_FTRACE. The issue is that it breaks the dependencies
  and causes "make targz-pkg" to rebuild the entire world"

* tag 'trace-v4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/Makefile: Fix handling redefinition of CC_FLAGS_FTRACE

Pull DeviceTree fix from Rob Herring:
 "One regression for a 20 year old PowerMac:

   - Fix a regression on systems having a DT without any phandles which
     happens on a PowerMac G3"

* tag 'devicetree-fixes-for-4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: fix phandle cache creation for DTs with no phandles

Pull xen fixes from Juergen Gross:
 "This contains some minor cleanups and fixes:

   - a new knob for controlling scrubbing of pages returned by the Xen
     balloon driver to the Xen hypervisor to address a boot performance
     issue seen in large guests booted pre-ballooned

   - a fix of a regression in the gntdev driver which made it impossible
     to use fully virtualized guests (HVM guests) with a 4.19 based dom0

   - a fix in Xen cpu hotplug functionality which could be triggered by
     wrong admin commands (setting number of active vcpus to 0)

  One further note: the patches have all been under test for several
  days in another branch. This branch has been rebased in order to avoid
  merge conflicts"

* tag 'for-linus-4.19c-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/gntdev: fix up blockable calls to mn_invl_range_start
  xen: fix GCC warning and remove duplicate EVTCHN_ROW/EVTCHN_COL usage
  xen: avoid crash in disable_hotplug_cpu
  xen/balloon: add runtime control for scrubbing ballooned out pages
  xen/manage: don't complain about an empty value in control/sysrq node

Pull Xtensa fixes and cleanups from Max Filippov:

 - don't allocate memory in platform_setup as the memory allocator is
   not initialized at that point yet;

 - remove unnecessary ifeq KBUILD_SRC from arch/xtensa/Makefile;

 - enable SG chaining in arch/xtensa/Kconfig.

* tag 'xtensa-20180914' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: enable SG chaining in Kconfig
  xtensa: remove unnecessary KBUILD_SRC ifeq conditional
  xtensa: ISS: don't allocate memory in platform_setup

Pull arm64 fixes from Will Deacon:
 "The trickle of arm64 fixes continues to come in.

  Nothing that's the end of the world, but we've got a fix for PCI IO
  port accesses, an accidental naked "asm goto" and a fix to the
  vmcoreinfo PT_NOTE merged this time around which we'd like to get
  sorted before it becomes ABI.

   - Fix ioport_map() mapping the wrong physical address for some I/O
     BARs

   - Remove direct use of "asm goto", since some compilers don't like
     that

   - Ensure kimage_voffset is always present in vmcoreinfo PT_NOTE"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  asm-generic: io: Fix ioport_map() for !CONFIG_GENERIC_IOMAP && CONFIG_INDIRECT_PIO
  arm64: kernel: arch_crash_save_vmcoreinfo() should depend on CONFIG_CRASH_CORE
  arm64: jump_label.h: use asm_volatile_goto macro instead of "asm goto"

Add a helper for the case when the nfs4 open state has been set to use
a delegation stateid, and we want to revert to using the open stateid.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

The previous fix broke recovery of delegated stateids because it assumes
that if we did not mark the delegation as suspect, then the delegation has
effectively been revoked, and so it removes that delegation irrespectively
of whether or not it is valid and still in use. While this is "mostly
harmless" for ordinary I/O, we've seen pNFS fail with LAYOUTGET spinning
in an infinite loop while complaining that we're using an invalid stateid
(in this case the all-zero stateid).

What we rather want to do here is ensure that the delegation is always
correctly marked as needing testing when that is the case. So we want
to close the loophole offered by nfs4_schedule_stateid_recovery(),
which marks the state as needing to be reclaimed, but not the
delegation that may be backing it.

Fixes: 0e3d3e5d ("NFSv4.1 fix infinite loop on IO BAD_STATEID error")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.11+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Now that the value of 'ino' can be NULL or an ERR_PTR(), we need to
change the test in the tracepoint.

Fixes: ce5624f7 ("NFSv4: Return NFS4ERR_DELAY when a layout fails...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

If someone interrupts a wait on one or more outstanding layoutgets in
pnfs_update_layout() then return the ERESTARTSYS/EINTR error.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>