- 03 Jan, 2017 30 commits
-
-
Mark Rustad authored
The firmware version method and functions are not used anywhere, so remove them all. Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Tested-by:
Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mark Rustad authored
There are two problems with EEPROM access. One is that it needs to hold the semaphore until the entire response is read or else the response can be corrupted by other firmware accesses. The second problem is that acquiring and releasing the semaphore is slow, so it should be taken and released once when multiple EEPROM accesses will be done. Both of these issues can be solved by adding a new function, ixgbe_hic_unlocked, to issue firmware commands that will assume that the caller has acquired the needed semaphore. Signed-off-by:
-
Don Skidmore authored
This patch ensures that the advertised link speeds are configured for X553 KR/KX backplane. Without this patch the link remains at 1G when resuming from low power after being downshifted by LPLU. Signed-off-by:
Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by:
-
Emil Tantilov authored
Restore adapter->hw.hw_addr after handling an error, or a resume operation to make sure we can access the registers. Signed-off-by:
Emil Tantilov <emil.s.tantilov@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
-
Yusuke Suzuki authored
Rx timestamp does not work on 82599 and X540 because bitwise operation of RX_HWTSTAMP flags is incorrect and ixgbe_ptp_rx_hwtstamp() is never called. This patch fixes it to enable Rx timestamp on 82599 and X540. Without this fix: ptp4l[278.730]: selected /dev/ptp8 as PTP clock ptp4l[278.733]: port 1: INITIALIZING to LISTENING on INITIALIZE ptp4l[278.733]: port 0: INITIALIZING to LISTENING on INITIALIZE ptp4l[278.834]: port 1: received SYNC without timestamp ptp4l[278.835]: port 1: new foreign master 1c3947.fffe.60f9cc-1 ptp4l[279.834]: port 1: received SYNC without timestamp ptp4l[280.834]: port 1: received SYNC without timestamp ptp4l[281.834]: port 1: received SYNC without timestamp ptp4l[282.834]: port 1: received SYNC without timestamp ptp4l[282.835]: selected best master clock 1c3947.fffe.60f9cc ptp4l[282.835]: port 1: LISTENING to UNCALIBRATED on RS_SLAVE ptp4l[283.834]: port 1: received SYNC without timestamp With this fix: ptp4l[239.154]: selected /dev/ptp8 as PTP clock ptp4l[239.157]: port 1: INITIALIZING to LISTENING on INITIALIZE ptp4l[239.157]: port 0: INITIALIZING to LISTENING on INITIALIZE ptp4l[240.989]: port 1: new foreign master 1c3947.fffe.60f9cc-1 ptp4l[244.989]: selected best master clock 1c3947.fffe.60f9cc ptp4l[244.989]: port 1: LISTENING to UNCALIBRATED on RS_SLAVE ptp4l[246.977]: master offset -899583339542096 s0 freq +0 path delay 16222 ptp4l[247.977]: master offset -899583339617265 s1 freq -75169 path delay 16177 ptp4l[248.977]: master offset -130 s2 freq -75299 path delay 16177 ptp4l[248.977]: port 1: UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED ptp4l[249.977]: master offset -9 s2 freq -75217 path delay 16177 ptp4l[250.977]: master offset 88 s2 freq -75123 path delay 16132 Fixes: a9763f3c ("ixgbe: Update PTP to support X550EM_x devices") Signed-off-by:
Yusuke Suzuki <yus-suzuki@uf.jp.nec.com> Tested-by:
-
Emil Tantilov authored
Make sure that we free the IRQs in ixgbevf_io_error_detected() when responding to an PCIe AER error and also restore them when the interface recovers from it. Previously it was possible to trigger BUG_ON() check in free_msix_irqs() in the case where we call ixgbevf_remove() after a failed recovery from AER error because the interrupts were not freed. Also moved the down and free functions into ixgbevf_close_suspend() same as with ixgbe. Signed-off-by:
-
Emil Tantilov authored
Make sure that we free the IRQs in ixgbe_io_error_detected() when responding to an PCIe AER error and also restore them when the interface recovers from it. Previously it was possible to trigger BUG_ON() check in free_msix_irqs() in the case where we call ixgbe_remove() after a failed recovery from AER error because the interrupts were not freed. Signed-off-by:
-
Ken Cox authored
There are two methods for setting mac addresses in a Macvlan, that differentiate themselves in the function macvlan_set_mac_Address. If the macvlan mode is passthru, then we use the dev_set_mac_address method, otherwise we use the dev_uc api via macvlan_sync_addresses. The latter method (which would stem from using any non-passthru mode, like bridge, or vepa), calls down into the driver in a path that terminates in ixgbevf_set_uc_addr_vf, which sends a IXGBE_VF_SET_MACVLAN message, which causes the pf to spawn the noted error message. This occurs because it appears that the guest is trying to delete the mac address of the macvlan before adding another. The other path in macvlan_set_mac_address uses dev_set_mac_address, which calls into ixgbevf_set_mac which uses the IXGBE_VF_SET_MAC_ADDR to the pf to set the macvlan mac address. The discrepancy here is in the handlers. The handler function for IXGBE_VF_SET_MAC_ADDR (ixgbe_set_vf_mac_addr) has a check for the vfinfo[].trusted bit to allow the operation if the vf is trusted. In comparison, the IXGBE_VF_SET_MACVLAN message handler (ixgbe_set_vf_macvlan_msg) has no such check of the trusted bit. Signed-off-by:
Ken Cox <jkc@redhat.com> Signed-off-by:
-
Emil Tantilov authored
When an interface is part of a namespace it is possible that ixgbevf_close() may be called while ixgbevf_suspend() is running which ends up in a double free WARN and/or a BUG in free_msi_irqs() To handle this situation we extend the rtnl_lock() to protect the call to netif_device_detach() and check for !netif_device_present() to avoid entering close while in suspend. Also added rtnl locks to ixgbevf_queue_reset_subtask(). CC: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
Emil Tantilov authored
When an interface is part of a namespace it is possible that ixgbe_close() may be called while __ixgbe_shutdown() is running which ends up in a double free WARN and/or a BUG in free_msi_irqs(). To handle this situation we extend the rtnl_lock() to protect the call to netif_device_detach() and ixgbe_clear_interrupt_scheme() in __ixgbe_shutdown() and check for netif_device_present() to avoid clearing the interrupts second time in ixgbe_close(); Also extend the rtnl lock in ixgbe_resume() to netif_device_attach(). Signed-off-by:
-
Tony Nguyen authored
BaseT adapters that are capable of supporting 100Mb are not reporting this capability. This patch corrects the reporting so that 100Mb is shown as supported on those adapters. Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
-
Tony Nguyen authored
A retry count of 10 is likely to run into problems on X550 devices that have to detect and reset unresponsive CS4227 devices. So, reduce the I2C retry count to 3 for X550 and above. This should avoid any possible regressions in existing devices. Signed-off-by:
-
Tony Nguyen authored
This is an extension of commit 003287e0 ("ixgbevf: Correct parameter sent to LED function"); add bounds checking to x540 functions to ensure the index is valid. Signed-off-by:
-
Emil Tantilov authored
The indirection table was reported incorrectly for X550 and newer where we can support up to 64 RSS queues. Reported-by Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by:
-
Tony Nguyen authored
The generic PHY reset check we had previously is not sufficient for the ixgbe_phy_x550em_ext_t PHY type. Check 1.CC02.0 instead - same as ixgbe_init_ext_t_x550(). Signed-off-by:
-
Tony Nguyen authored
Some x550 devices require the driver version reported to its firmware; this patch sends the driver version string to the firmware through the host interface command for x550 devices. Signed-off-by:
-
Emil Tantilov authored
FEC is configured by the NVM and the driver should not be overriding it. Signed-off-by:
-
David S. Miller authored
Jon Maloy says: ==================== tipc: improve interaction socket-link We fix a very real starvation problem that may occur when a link encounters send buffer congestion. At the same time we make the interaction between the socket and link layer simpler and more consistent. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Jon Paul Maloy authored
The socket code currently handles link congestion by either blocking and trying to send again when the congestion has abated, or just returning to the user with -EAGAIN and let him re-try later. This mechanism is prone to starvation, because the wakeup algorithm is non-atomic. During the time the link issues a wakeup signal, until the socket wakes up and re-attempts sending, other senders may have come in between and occupied the free buffer space in the link. This in turn may lead to a socket having to make many send attempts before it is successful. In extremely loaded systems we have observed latency times of several seconds before a low-priority socket is able to send out a message. In this commit, we simplify this mechanism and reduce the risk of the described scenario happening. When a message is attempted sent via a congested link, we now let it be added to the link's backlog queue anyway, thus permitting an oversubscription of one message per source socket. We still create a wakeup item and return an error code, hence instructing the sender to block or stop sending. Only when enough space has been freed up in the link's backlog queue do we issue a wakeup event that allows the sender to continue with the next message, if any. The fact that a socket now can consider a message sent even when the link returns a congestion code means that the sending socket code can be simplified. Also, since this is a good opportunity to get rid of the obsolete 'mtu change' condition in the three socket send functions, we now choose to refactor those functions completely. Signed-off-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Jon Paul Maloy authored
During multicast reception we currently use a simple linked list with push/pop semantics to store port numbers. We now see a need for a more generic list for storing values of type u32. We therefore make some modifications to this list, while replacing the prefix 'tipc_plist_' with 'u32_'. We also add a couple of new functions which will come to use in the next commits. Acked-by:
-
Jon Paul Maloy authored
The functions tipc_wait_for_sndpkt() and tipc_wait_for_sndmsg() are very similar. The latter function is also called from two locations, and there will be more in the coming commits, which will all need to test on different conditions. Instead of making yet another duplicates of the function, we now introduce a new macro tipc_wait_for_cond() where the wakeup condition can be stated as an argument to the call. This macro replaces all current and future uses of the two functions, which can now be eliminated. Acked-by:
-
David S. Miller authored
Sowmini Varadhan says: ==================== TPACKET_V3 TX_RING support This patch series allows an application to use a single PF_PACKET descriptor and leverage the best implementations of TX_RING and RX_RING that exist today. Patch 1 adds the kernel/Documentation changes for TX_RING support and patch2 adds the associated test case in selftests. Changes since v2: additional sanity checks for setsockopt input for TX_RING/TPACKET_V3. Refactored psock_tpacket.c test code to avoid code duplication from V2. ==================== Signed-off-by: -
Sowmini Varadhan authored
Add a test case and sample code for (TPACKET_V3, PACKET_TX_RING) Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
-
Sowmini Varadhan authored
Although TPACKET_V3 Rx has some benefits over TPACKET_V2 Rx, *_v3 does not currently have TX_RING support. As a result an application that wants the best perf for Tx and Rx (e.g. to handle request/response transacations) ends up needing 2 sockets, one with *_v2 for Tx and another with *_v3 for Rx. This patch enables TPACKET_V2 compatible Tx features in TPACKET_V3 so that an application can use a single descriptor to get the benefits of _v3 RX_RING and _v2 TX_RING. An application may do a block-send by first filling up multiple frames in the Tx ring and then triggering a transmit. This patch only support fixed size Tx frames for TPACKET_V3, and requires that tp_next_offset must be zero. Signed-off-by:
-
Edward Cree authored
Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Edward Cree authored
Signed-off-by:
-
Nikolay Aleksandrov authored
While working with ipmr, we noticed that it is impossible to determine if an entry is actually unresolved or its IIF interface has disappeared (e.g. virtual interface got deleted). These entries look almost identical to user-space when dumping or receiving notifications. So in order to recognize them add a new RTNH_F_UNRESOLVED flag which is set when sending an unresolved cache entry to user-space. Suggested-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Volodymyr Bendiuga authored
Some devices, such as the mv88e6097 do have ADDR[0] external and so it is possible to configure the device to use SMI address 0x1. Remove the restriction, as there are boards using this address. Signed-off-by:
Volodymyr Bendiuga <volodymyr.bendiuga@westermo.se> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by:Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
-
David S. Miller authored
Merge branch 'for_4.11/net-next/rds_v3' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux Santosh Shilimkar says: ==================== net: RDS updates v2->v3: - Re-based against latest net-next head. - Dropped a user visible change after discussing with David Miller. It needs some more work to fully support old/new tools matrix. - Addressed Dave's comment about bool usage in patch "RDS: IB: track and log active side..." v1->v2: Re-aligned indentation in patch 'RDS: mark few internal functions..." Series consist of: - RDMA transport fixes for map failure, listen sequence, handler panic and composite message notification. - Couple of sparse fixes. - Message logging improvements for bind failure, use once mr semantics and connection remote address, active end point. - Performance improvement for RDMA transport by reducing the post send pressure on the queue and spreading the CQ vectors. - Useful statistics for socket send/recv usage and receive cache usage. - Additional RDS CMSG used by application to track the RDS message stages for certain type of traffic to find out latency spots. Can be enabled/disabled per socket. ==================== Signed-off-by:
-
- 02 Jan, 2017 10 commits
-
-
Santosh Shilimkar authored
Socket option to tap receive path latency in various stages in nano seconds. It can be enabled on selective sockets using using SO_RDS_MSG_RXPATH_LATENCY socket option. RDS will return the data to application with RDS_CMSG_RXPATH_LATENCY in defined format. Scope is left to add more trace points for future without need of change in the interface. Reviewed-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com>
-
Avinash Repaka authored
RDS support max message size as 1M but the code doesn't check this in all cases. Patch fixes it for RDMA & non-RDMA and RDS MR size and its enforced irrespective of underlying transport. Signed-off-by:
Avinash Repaka <avinash.repaka@oracle.com> Signed-off-by:
-
Venkat Venkatsubra authored
Tracks the receive side memory added to scokets and removed from sockets. Signed-off-by:
Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by:
-
Santosh Shilimkar authored
Shutdown code reaping loop takes care of emptying the CQ's before they being destroyed. And once tasklets are killed, the hanlders are not expected to run. But because of core tasklet code issues, tasklet handler could still run even after tasklet_kill, RDS IB shutdown code already reaps the CQs before freeing cq/qp resources so as such the handlers have nothing left to do post shutdown. On other hand any handler running after teardown and trying to access already freed qp/cq resources causes issues Patch fixes this race by makes sure that handlers returns without any action post teardown. Reviewed-by:
Wengang <wen.gang.wang@oracle.com> Signed-off-by:
-
Santosh Shilimkar authored
When application sends an RDS RDMA composite message consist of RDMA transfer to be followed up by non RDMA payload, it expect to be notified *only* when the full message gets delivered. RDS RDMA notification doesn't behave this way though. Thanks to Venkat for debug and root casuing the issue where only first part of the message(RDMA) was successfully delivered but remainder payload delivery failed. In that case, application should not be notified with a false positive of message delivery success. Fix this case by making sure the user gets notified only after the full message delivery. Reviewed-by:
-
Santosh Shilimkar authored
Based on available device vectors, allocate cqs accordingly to get better spread of completion vectors which helps performace great deal.. Signed-off-by: -
Santosh Shilimkar authored
Tracks the ib receive cache total, incoming and frag allocations. Signed-off-by: -
Santosh Shilimkar authored
Useful to know the active and passive end points in a RDS IB connection. Signed-off-by: -
Santosh Shilimkar authored
In absence of extension headers, message log will keep flooding the console. As such even without use_once we can clean up the MRs so its not really an error case message so make it debug message Signed-off-by: -
Santosh Shilimkar authored
MR invalidation in RDS is done in background thread and not in data path like registration. So break the dependency between them which helps to remove the performance bottleneck. Signed-off-by:
-
