On the 92hd8xxx codecs port 0xe needs the connection selected to be the
last DAC in the list.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Some laptops like VAIO have multiple codecs and uses ALC262 only for
the SPIDF output without analog I/O.  So far, the codec-parser assumes
the presence of analog I/O and returned an error for such a case.

This patch adds some hacks to allow the digital-only configuration for
ALC262.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Assign the proper PCM digital I/O type (HDA_PCM_TYPE_*) for the digital
I/O on STAC/IDT codecs.  HDA_PCM_TYPE_HDMI is assigned for the HDMI I/O.

A similar framework is implemented to patch_realtek.c, but it's not
set up and still using only HDA_PCM_TYPE_SPDIF yet.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add dig_out_type and dig_in_type fields to autocfg struct.
A proper HDA_PCM_TYPE_* value is assigned to these fields according
to the pin-jack location type value.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Don't break the loop in snd_hda_codec_build_pcms() even if the item
has no substreams.

It's possible that it's an empty item and the next item containing
the valid substreams (e.g. realtek codecs may create the analog
and alt-analog but no digitl streams).
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Use the standard STAC/IDT auto-probing routine for non-static
STAC9872 codec probing.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Accept non-SPDIF digital I/O pins as the digital pins.
These are usually corresponding to HDMI I/O.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add the debug prints for digital I/O pin detections in
snd_hda_parse_pin_def_config() function.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fixed invalid power mappings for ports 0xd and 0xe on 93hd83xxx codecs.
They were shifted right one too many bits.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add the 82801H variants 1071:8227 and 8086:2503 to use ALC883_MITAC

Reference: Ubuntu bug 210865
    https://bugs.launchpad.net/bugs/210865Signed-off-by: Luke Yelavich <themuso@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The codec-parsing of STAC925x was utterly broken due to its unique
design unlike other STAC codecs.  It has a volume control only in NID
0x0e (similar as STAC9200), but the parser assumes that the amp is
available on each DAC widget.

The patch fixes the whole wrong stories: fix the initial volume,
assign the fixed "Master" volume, and avoid to create wrong volume
controls.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The value set in the commit 2465fb66
is actually wrong.  The value range is from 0 to 0x1f while the patch
sets to 0x7f.  Let's fix it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix HP dv5 (103c:3603) built-in mic input.

Reference: kernel bug 12440
	http://bugzilla.kernel.org/show_bug.cgi?id=12440Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: stable@kernel.org

The selector widget 0x0e isn't initialized properly in the whole probe
process, thus it can be a wrong value depending on the BIOS setup.

This patch adds the init verb to set it to the max & unmuted.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix the bug introduced in commit c15c5060:
  sound/pci/hda/patch_sigmatel.c: In function ‘patch_stac92hd83xxx’:
  sound/pci/hda/patch_sigmatel.c:4765: warning: assignment from incompatible pointer type
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Have the Samsung Q45 (144d:c510) select ALC262_HIPPO by default

Reference: Ubuntu bug 200210
	http://launchpad.net/bugs/200210Signed-off-by: Luke Yelavich <themuso@ubuntu.com>
Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Resetting HP pinctl at the unplugged state may cause a sort of regression
on some devices because of their wrong pin configuration.

A simple workaround is to disable the pin reset.  This is ugly and may be
not good from the power-saving POV (if any), but damn simple.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: stable@kernel.org

Added amp nid for stac92hd8xxx families of codecs so the input amp
mixer is created.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

CF-74 does the headphone/speaker switching on hardware, thus the driver
shouldn't do any software-toggling of pins.  Otherwise it results in a
silent headphone output.

This patch simply resets the hp_detect flag to fix the problem.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Update models in patch_sigmatel.c, mainly for the last Gateway updates.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Replaced the old schedule_work() with queue_delayed_work() where
overlooked in the previous patches.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add the model=hp-m4 quirk for another HP dv5 (103c:3603)
Reference: kernel bug#12440
	http://bugzilla.kernel.org/show_bug.cgi?id=12440Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: stable@kernel.org

Added the new id for NVidia MCP HDMI (10de:0007).
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix a typo in stac92hd83xxx_cfg_tbl[].  The actual number is identical
thus there is no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

At 37000 feet somewhere near Greenland I woke up from a half-sleep with the
realisation that __lowest_in_progress() is buggy. After landing I checked
and there were indeed 2 problems with it; this patch fixes both:
* The order of the list checks was wrong
* The locking was not correct.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There has been some light flamewar on lkml about decoding oopses
in modules (as part of the crashdump flamewar).

Now this isn't rocket science, just the markup_oops.pl script
cheaped out and didn't handle modules. But really; a flamewar
all about that?? What happened to C++ in the kernel or reading
files from inside the kernel?

This patch adds module support to markup_oops.pl; it's not the
most pretty perl but it works for my testcases...
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add the Multi-Tech cellular modem firmware to the TI USB serial driver.
This firmware was extracted from:

ftp://ftp.multitech.com/wireless/wireless_linux.zip

Firmware licence: "all firmware components are redistributable in binary
	form" per support@multitech.com
	Copyright (C) 2005 Multi-Tech Systems, Inc.
Signed-off-by: Chris Adams <cmadams@hiwaay.net>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add Multi-Tech cellular modem support to the ti_usb_3410_5052 driver.
Signed-off-by: Chris Adams <cmadams@hiwaay.net>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The TI USB serial driver supports specifying alternate vendor and
product IDs (since the chips can and are used in devices under other
vendor/product IDs).  However, the alternate IDs were not loaded in the
combined product table.  This patch also adds support for loading
alternate firmware for alternate vendor/product IDs.
Signed-off-by: Chris Adams <cmadams@hiwaay.net>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Julia Lawell found a case where a NULL check was misplaced in the
usb-serial code. However as the object in question cannot be NULL the
check can simply be removed.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Julia Lawall found an un-needed check in the neo driver. Her patch moves
the check to cover the code dereferencing it, however it cannot be NULL
anyway so remove the NULL check instead.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The pty changes and updates for window sizing forgot to correct the
kerneldoc
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  kernel/sched.c: add missing forward declaration for 'double_rq_lock'
  sched: partly revert "sched debug: remove NULL checking in print_cfs_rt_rq()"
  cpumask: fix CONFIG_NUMA=y sched.c

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sparc64: Fix cpumask related build failure
  smp_call_function_single(): be slightly less stupid, fix
  smp_call_function_single(): be slightly less stupid
  rcu: fix bug in rcutorture system-shutdown code

* 'for-next' of git://git.o-hand.com/linux-mfd:
  mfd: Fix twl4030-core build
  mfd: Ensure sm501 GPIO pin mode is GPIO when configured
  mfd: dm355 evm MMC/SD card detection
  regulator: PCF50633 pmic driver
  input: PCF50633 input driver
  power_supply: PCF50633 battery charger driver
  rtc: PCF50633 rtc driver
  mfd: PCF50633 gpio support
  mfd: PCF50633 adc driver
  mfd: PCF50633 core driver

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (37 commits)
  MIPS: Only write c0_framemask on CPUs which have this register.
  MIPS: Alchemy: new userspace suspend interface for development boards.
  MIPS: Alchemy: dbdma suspend/resume support.
  MIPS: Alchemy: Fix up PM code on Au1550/Au1200
  MIPS: Alchemy: move calc_clock function.
  MIPS: Alchemy: RTC counter clocksource / clockevent support.
  MIPS: make cp0 counter clocksource/event usable as fallback.
  MIPS: Alchemy: remove cpu_table.
  MIPS: Alchemy: remove get/set_au1x00_lcd_clock().
  MIPS: Print irq handler description
  MIPS: Alchemy: pb1200: update CPLD cascade irq handler.
  MIPS: Alchemy: update core interrupt code.
  MIPS: Alchemy: move commandline mangling out of common code
  MIPS: Alchemy: devboards: consolidate files
  MIPS: Alchemy: Move development board code to common subdirectory
  MIPS: Add Cavium OCTEON to arch/mips/Kconfig
  MIPS: Add defconfig for Cavium OCTEON.
  MIPS: Adjust the dma-common.c platform hooks.
  MIPS: Add Cavium OCTEON slot into proper tlb category.
  MIPS:  Compute branch returns for Cavium OCTEON specific branch instructions.
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits)
  ucc_geth: use correct UCCE macros
  net_dma: acquire/release dma channels on ifup/ifdown
  cxgb3: Keep LRO off if disabled when interface is down
  sfc: SFT9001: Fix condition for LNPGA power-off
  dccp ccid-3: Fix RFC reference
  smsc911x: register irq with device name, not driver name
  smsc911x: fix smsc911x_reg_read compiler warning
  forcedeth: napi schedule lock fix
  net: fix section mismatch warnings in dccp/ccids/lib/tfrc.c
  forcedeth: remove mgmt unit for mcp79 chipset
  qlge: Remove dynamic alloc of rx ring control blocks.
  qlge: Fix schedule while atomic issue.
  qlge: Remove support for device ID 8000.
  qlge: Get rid of split addresses in hardware control blocks.
  qlge: Get rid of volatile usage for shadow register.
  forcedeth: version bump and copyright
  forcedeth: xmit lock fix
  netdev: missing validate_address hooks
  netdev: add missing set_mac_address hook
  netdev: gianfar: add MII ioctl handler
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: Fix asm/signal.h for 32-bit.
  sparc: Eliminate PROMLIB_INTERNAL as it does nothing
  sparc: Kill exports of prom internal functions
  sparc64: move EXPORT_SYMBOL to the symbols definition
  sparc: move EXPORT_SYMBOL to the symbols definition
  sparc: Create a new file lib/ksyms.c and add export of all symbols defined in assembler in lib/ to this file.
  sparc: Most unaligned_64.c tweaks for branch tracer warnings.
  sparc: Fix sun4d_irq.c build.
  sparc: Update 32-bit defconfig.
  sparc64: fix warnings in psycho_common after ull conversion