In the original driver it is missed to setup a free running driver.
This timer is needed for the scheduler.
So setup it.
Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Use timer1 as clockevent timer.
The old driver uses timer2, which has some issues to setup
Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Add missing register defintions for the gemini clocksource
Also do some #define' cleanup to make the code more readable.
Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Migrate EP93xx driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

The two Nomadik variants have the accelerometer mounted on
different I2C lines. Push the definition down to the top-level
board DTS files to get things right.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

The cache setup magic value in the Nomadik machine is plain wrong,
the correct settings can be done using device tree in accordance
with the settings from ST's own port.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

The S8815 board is using RX/TX on UART0, and the NHK8815 is
using RX/TX and CTS/RTS (the latter connected to a Bluetooth
chip). Activate the right groups with the u0 UART0 function
on each board and undisable it. Get rid of the old erroneous
default definition from the SoC file.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Instead of introducing a board-specific DT node for biasing the
MMC/SD and SATA ports, use the new device tree hogs.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup

Samsung cleanup for v4.3

- make the following headers local
  watchdog-reset, onenand-core, irq-uart, backlight,
  ata-core, regs-usb-hsotg-phy, spi-core, nand-core,
  fb-core and regs-srom headers
- make the following c file local
  s5p-dev-mfc, dev-backlight and setup-camif c file
- remove keypad-core.h file
- drop owner assignment in pmu.c
- remove duplicated define of SLEEP_MAGIC
- make exynos5420_powerdown_conf() staic

* tag 'samsung-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: SAMSUNG: remove keypad-core header in plat-samsung
  ARM: SAMSUNG: local watchdog-reset header in mach-s3c64xx
  ARM: SAMSUNG: local onenand-core header in mach-s3c64xx
  ARM: SAMSUNG: local irq-uart header in mach-s3c64xx
  ARM: SAMSUNG: local backlight header in mach-s3c64xx
  ARM: SAMSUNG: local ata-core header in mach-s3c64xx
  ARM: SAMSUNG: local regs-usb-hsotg-phy header in mach-s3c64xx
  ARM: SAMSUNG: local spi-core header in mach-s3c24xx
  ARM: SAMSUNG: local nand-core header in mach-s3c24xx
  ARM: SAMSUNG: local fb-core header in mach-s3c24xx
  ARM: SAMSUNG: local regs-srom header in mach-exynos
  ARM: SAMSUNG: make local s5p-dev-mfc in mach-exynos
  ARM: SAMSUNG: make local dev-backlight in mach-s3c64xx
  ARM: SAMSUNG: make local setup-camif in mach-s3c24xx
  ARM: EXYNOS: Drop owner assignment in pmu.c
  ARM: EXYNOS: Remove duplicated define of SLEEP_MAGIC
  ARM: EXYNOS: Make local function static
Signed-off-by: Olof Johansson <olof@lixom.net>

Turns out I fumbled a couple of the merge resolutions for marzen board removal.
Signed-off-by: Olof Johansson <olof@lixom.net>

This removes a lot of ancient cruft from the Ux500 SMP boot.
Instead of the pen grab/release, just point the ROM to
secondary_boot() and start the second CPU there, then send
the IPI.

Use our own SMP enable method. This enables us to remove the
last static mapping and get both CPUs booting properly.

Tested this and it just works.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

* fixes: (28 commits)
  ARM: ux500: add an SMP enablement type and move cpu nodes
  ARM: dts: keystone: fix dt bindings to use post div register for mainpll
  ARM: nomadik: disable UART0 on Nomadik boards
  ARM: dts: i.MX35: Fix can support.
  ARM: OMAP2+: hwmod: Fix _wait_target_ready() for hwmods without sysc
  ARM: dts: add CPU OPP and regulator supply property for exynos4210
  ARM: dts: Update video-phy node with syscon phandle for exynos3250
  ARM: keystone: dts: rename pcie nodes to help override status
  ARM: keystone: dts: fix dt bindings for PCIe
  ARM: pxa: fix dm9000 platform data regression
  ARM: DRA7: hwmod: fix gpmc hwmod
  ARM: dts: Correct audio input route & set mic bias for am335x-pepper
  ARM: OMAP2+: Add HAVE_ARM_SCU for AM43XX
  MAINTAINERS: digicolor: add dts files
  ARM: ux500: fix MMC/SD card regression
  ARM: ux500: define serial port aliases
  ARM: dts: OMAP5: Add #iommu-cells property to IOMMUs
  ARM: dts: OMAP4: Add #iommu-cells property to IOMMUs
  ARM: dts: Fix frequency scaling on Gumstix Pepper
  ARM: dts: configure regulators for Gumstix Pepper
  ...

The "cpus" node cannot be inside the "soc" node, while this
works for the CoreSight blocks, the early boot code will look
for "cpus" directly under the root node, so this is a hard
convention. So move the CPU nodes.

Augment the "reg" property to match what is actually in the
hardware: 0x300 and 0x301 respectively.

Then add an SMP enablement type to be used by the SMP init
code, "ste,dbx500-smp".
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-marzen-board-removal-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup

Renesas ARM Based SoC Marzen Board Removal for v4.3

* Remove legacy r8a7779 SoC code
* Remove legacy marzen board code

* tag 'renesas-marzen-board-removal-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7779: Remove legacy SoC code
  ARM: shmobile: marzen: Remove legacy board code
  ARM: shmobile: r8a7779: Cleanup header file
  ARM: shmobile: marzen-reference: Remove C board code
  ARM: shmobile: r8a7779: Generic SMP ops
  ARM: shmobile: r8a7779: Generic CCF and timer support
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge branch 'queue/irq/arm' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next/cleanup

Merge "ARM: Interrupt cleanups and API change preparation" from Thomas
Gleixner:

The following patch series contains the following changes:

    - Consolidation of chained interrupt handler setup/removal

    - Switch to functions which avoid a redundant interrupt
      descriptor lookup

    - Preparation of interrupt flow handlers for the 'irq' argument
      removal

* 'queue/irq/arm' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ARM/orion/gpio: Prepare gpio_irq_handler for irq argument removal
  ARM/pxa: Prepare balloon3_irq_handler for irq argument removal
  ARM/pxa: Prepare *_irq_handler for irq argument removal
  ARM/dove: Prepare pmu_irq_handler for irq argument removal
  ARM/sa1111: Prepare sa1111_irq_handler for irq argument removal
  ARM/locomo: Prepare locomo_handler for irq argument removal
  ARM, irq: Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc
  ARM/LPC32xx: Use irq_set_handler_locked()
  ARM/irq: Use access helper irq_data_get_affinity_mask()
  ARM/locomo: Consolidate chained IRQ handler install/remove
  ARM/orion: Consolidate chained IRQ handler install/remove
Signed-off-by: Olof Johansson <olof@lixom.net>

All of the keystone devices have a separate register to hold post
divider value for main pll clock. Currently the fixed-postdiv
value used for k2hk/l/e SoCs works by sheer luck as u-boot happens to
use a value of 2 for this. Now that we have fixed this in the pll
clock driver change the dt bindings for the same.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Since keypad-core header is not used, this patch removes it.

Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

This patch moves watchdog-reset header file into mach-s3c64xx.
Because it is not used for others except mach-s3c64xx.

Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

This patch moves onenand-core header file into mach-s3c64xx.
Because it is not used for others except mach-s3c64xx.

Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

This patch moves irq-uart header file into mach-s3c64xx.
Because it is not used for others except mach-s3c64xx.

Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

This patch moves backlight header file into mach-s3c64xx.
Because it is not used for others except mach-s3c64xx.

Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

This patch moves ata-core header file into mach-s3c64xx.
Because it is not used for others except mach-s3c64xx.

Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

This patch moves regs-usb-hsotg-phy header file into mach-s3c64xx.
Because it is not used for others except mach-s3c64xx.

Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

This patch moves spi-core header file into mach-s3c24xx.
Because it is not used for others except mach-s3c24xx.

Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

This patch moves nand-core header file into mach-s3c24xx.
Because it is not used for others except mach-s3c24xx.

Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

This patch moves fb-core header file into mach-s3c24xx.
Because it is not used for others except mach-s3c24xx.

Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

This patch moves regs-srom header file into mach-exynos.
Because it is not used for others except mach-exynos.

Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

This patch moves s5p-dev-mfc from plat-samsung into mach-exynos
because it is used for only exynos no other platforms.

Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

This patch moves dev-backlight from plat-samsung into mach-s3c64xx
because it is used for only s3c64xx no other platforms.

Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

This patch moves setup-camif from plat-samsung into mach-s3c24xx
because it can be used only for s3c24xx no other platforms.

Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>

set_irq_flags is ARM specific with custom flags which have genirq
equivalents. Convert drivers to use the genirq interfaces directly, so we
can kill off set_irq_flags. The translation of flags is as follows:

IRQF_VALID -> !IRQ_NOREQUEST
IRQF_PROBE -> !IRQ_NOPROBE
IRQF_NOAUTOEN -> IRQ_NOAUTOEN

For IRQs managed by an irqdomain, the irqdomain core code handles clearing
and setting IRQ_NOREQUEST already, so there is no need to do this in
.map() functions and we can simply remove the set_irq_flags calls. Some
users also modify IRQ_NOPROBE and this has been maintained although it
is not clear that is really needed. There appears to be a great deal of
blind copy and paste of this code.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Imre Kaloz <kaloz@openwrt.org>
Acked-by: Krzysztof Halasa <khalasa@piap.pl>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Roland Stigge <stigge@antcom.de>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Simtec Linux Team <linux@simtec.co.uk>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Wan ZongShun <mcuos.com@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org
Cc: linux-samsung-soc@vger.kernel.org
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Init data marked const should be annotated with __initconst for
correctness and not __initdata.  In some cases the array gathering
references to that data has to be marked const as well. This fixes
LTO builds that otherwise fail with section mismatch errors.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-fixes-4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes

The i.MX fixes for 4.2, 2nd round:
 - Add the required second clock for i.MX35 FlexCAN in device tree,
   so that the device can be probed by kernel successfully.

* tag 'imx-fixes-4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: i.MX35: Fix can support.
Signed-off-by: Olof Johansson <olof@lixom.net>

Now when the Marzen legacy board code is gone this patch
removes the unused r8a7779 legacy SoC code.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Remove Marzen legacy board code written in C. Instead
board support expressed in DT shall be used together
with Multiplatform and shmobile_defconfig.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Remove unused function prototypes from r8a7779.h and
make the functions static.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

The generic r8a7779 machine vector is now feature-wise equivalent
to the Marzen-reference case, so simply remove the Marzen C board
code to fall over on the generic r8a7779 machine vector.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Merge tag 'renesas-cleanup2-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup

Second Round of Renesas ARM Based SoC Cleanup for v4.3

* Silence APMU build warnings

* tag 'renesas-cleanup2-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: apmu: silence build warnings
Signed-off-by: Olof Johansson <olof@lixom.net>

The UART0 is not used on these boards, yet active and blocking
other use. Fix this by disabling UART0 and setting port aliases
to maintain port enumeration to userspace.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'for-v4.2-rc/omap-fixes-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes

Merge "ARM: OMAP2+: hwmod fixes for v4.2-rc" from Paul Walmsley:

ARM: OMAP2+: hwmod fixes for v4.2-rc

Two fixes against v4.2-rc1.  The first, for DRA7xx platforms,
corrects some incorrect GPMC hardware description data.  The
second one will ensure that the hwmod code will wait for any
module with CPU-accessible registers to become ready before
attempting to access it.

Basic build, boot, and PM test logs are available here:

http://www.pwsan.com/omap/testlogs/omap-hwmod-a-for-v4.2-rc/20150723065408/

Note that I do not have a DRA7xx or AM43xx board, and therefore
cannot test on those platforms.

* tag 'for-v4.2-rc/omap-fixes-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending:
  ARM: OMAP2+: hwmod: Fix _wait_target_ready() for hwmods without sysc
  ARM: DRA7: hwmod: fix gpmc hwmod
Signed-off-by: Olof Johansson <olof@lixom.net>