- 07 May, 2020 4 commits
-
-
Konrad Dybcio authored
Signed-off-by:
Konrad Dybcio <konradybcio@gmail.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200506210957.344590-3-konradybcio@gmail.com
-
Randy Dunlap authored
Add MODULE_LICENSE() to the panel-visionox-rm69299 driver to fix a build warning. WARNING: modpost: missing MODULE_LICENSE() in drivers/gpu/drm/panel/panel-visionox-rm69299.o Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Fixes: c7f66d32 ("drm/panel: add support for rm69299 visionox panel") Cc: Harigovindan P <harigovi@codeaurora.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Ezequiel Garcia authored
We need to keep the reference to the drm_gem_object until the last access by vkms_dumb_create. Therefore, the put the object after it is used. This fixes a use-after-free issue reported by syzbot. While here, change vkms_gem_create() symbol to static. Reported-and-tested-by: syzbot+e3372a2afe1e7ef04bc7@syzkaller.appspotmail.com Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200427214405.13069-1-ezequiel@collabora.com
-
Melissa Wen authored
This patch proposes a change in the behavior of the cursor to enable it as soon as the vkms module is added. Enabling the cursor by default appears to be an expected and more friendly behavior, especially when running IGT tests. Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Reviewed-by:
-
- 06 May, 2020 9 commits
-
-
Zou Wei authored
Fix the following sparse warning: drivers/gpu/drm/udl/udl_modeset.c:269:5: warning: symbol 'udl_handle_damage' was not declared. Should it be static? Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zou Wei <zou_wei@huawei.com> Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/video/fbdev/valkyriefb.c:348:10-11: WARNING comparing pointer to 0, suggest !E drivers/video/fbdev/valkyriefb.c:334:12-13: WARNING comparing pointer to 0 drivers/video/fbdev/valkyriefb.c:348:10-11: WARNING comparing pointer to 0 Signed-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
-
Harigovindan P authored
Add support for Visionox rm69299 panel. Signed-off-by:
Harigovindan P <harigovi@codeaurora.org> Reviewed-by:
Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
-
Harigovindan P authored
Documenting compatible string vendor "visionox" in vendor-prefix yaml file. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Christophe JAILLET authored
Some memory is vmalloc'ed in the 'w100fb_save_vidmem' function and freed in the 'w100fb_restore_vidmem' function. (these functions are called respectively from the 'suspend' and the 'resume' functions) However, it is also freed in the 'remove' function. In order to avoid a potential double free, set the corresponding pointer to NULL once freed in the 'w100fb_restore_vidmem' function. Fixes: aac51f09 ("[PATCH] w100fb: Rewrite for platform independence") Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Antonino Daplas <adaplas@pol.net> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: <stable@vger.kernel.org> # v2.6.14+ Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/video/fbdev/aty/atyfb_base.c:3822:3-10: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/aty/atyfb_base.c:3824:3-9: WARNING: Assignment of 0/1 to bool variable Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/video/fbdev/uvesafb.c:48:12-17: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/uvesafb.c:1827:3-13: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/uvesafb.c:1829:3-13: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/uvesafb.c:1835:3-9: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/uvesafb.c:1837:3-9: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/uvesafb.c:1839:3-8: WARNING: Assignment of 0/1 to bool variable Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/video/fbdev/udlfb.c:67:12-19: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/udlfb.c:68:12-20: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/udlfb.c:69:12-18: WARNING: Assignment of 0/1 to bool variable Signed-off-by:
-
Jason Yan authored
Fix the following coccicheck warning: drivers/video/fbdev/i810/i810_main.c:1969:3-7: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/i810/i810_main.c:1971:3-8: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/i810/i810_main.c:1973:3-9: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/i810/i810_main.c:1975:3-7: WARNING: Assignment of 0/1 to bool variable drivers/video/fbdev/i810/i810_main.c:2001:3-9: WARNING: Assignment of 0/1 to bool variable Signed-off-by:
-
- 05 May, 2020 10 commits
-
-
Nirmoy Das authored
Userspace can severely fragment rb_hole_addr rbtree by manipulating alignment while allocating buffers. Fragmented rb_hole_addr rbtree would result in large delays while allocating buffer object for a userspace application. It takes long time to find suitable hole because if we fail to find a suitable hole in the first attempt then we look for neighbouring nodes using rb_prev()/rb_next(). Traversing rbtree using rb_prev()/rb_next() can take really long time if the tree is fragmented. This patch improves searches in fragmented rb_hole_addr rbtree by modifying it to an augmented rbtree which will store an extra field in drm_mm_node, subtree_max_hole. Each drm_mm_node now stores maximum hole size for its subtree in drm_mm_node->subtree_max_hole. Using drm_mm_node->subtree_max_hole, it is possible to eliminate a complete subtree if that subtree is unable to serve a request hence reducing number of rb_prev()/rb_next() used. With this patch applied, 1 million bo allocs on amdgpu took ~8 sec, compared to 50k bo allocs which took 28 sec without it. partial test code: int test_fragmentation(void) { int i = 0; uint32_t minor_version; uint32_t major_version; struct amdgpu_bo_alloc_request request = {}; amdgpu_bo_handle vram_handle[MAX_ALLOC] = {}; amdgpu_device_handle device_handle; request.alloc_size = 4096; request.phys_alignment = 8192; request.preferred_heap = AMDGPU_GEM_DOMAIN_VRAM; int fd = open("/dev/dri/card0", O_RDWR | O_CLOEXEC); amdgpu_device_initialize(fd, &major_version, &minor_version, &device_handle); for (i = 0; i < MAX_ALLOC; i++) { amdgpu_bo_alloc(device_handle, &request, &vram_handle[i]); } for (i = 0; i < MAX_ALLOC; i++) amdgpu_bo_free(vram_handle[i]); return 0; } v2: Use RB_DECLARE_CALLBACKS_MAX to maintain subtree_max_hole v3: insert_hole_addr() should be static a function fix return value of next_hole_high_addr()/next_hole_low_addr() Reported-by:kbuild test robot <lkp@intel.com> v4: Fix commit message. Signed-off-by:
Nirmoy Das <nirmoy.das@amd.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Acked-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/364341/Signed-off-by:
-
Maya Rashish authored
It was removed in: Author: Christian König <christian.koenig@amd.com> Date: Wed Sep 25 11:38:50 2019 +0200 drm/ttm: remove pointers to globals Signed-off-by:Maya Rashish <coypu@sdf.org> Reviewed-by:
-
Emmanuel Vadot authored
Source file was dual licenced but the header was omitted, fix that. Contributors for this file are: Daniel Vetter <daniel.vetter@ffwll.ch> Matt Roper <matthew.d.roper@intel.com> Maxime Ripard <mripard@kernel.org> Noralf Trønnes <noralf@tronnes.org> Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
Noralf Trønnes <noralf@tronnes.org> Acked-by:
Matt Roper <matthew.d.roper@intel.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
Maxime Ripard <mripard@kernel.org> Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
Emmanuel Vadot <manu@FreeBSD.org> Signed-off-by:
-
Michal Orzel authored
As suggested by the TODO list for the kernel DRM subsystem, replace the deprecated functions that take/drop modeset locks with new helpers. Signed-off-by:
Michal Orzel <michalorzel.eng@gmail.com> Signed-off-by:
-
Neil Armstrong authored
The Amlogic S805X/Y uses the same die as the S905X, but with more limited graphics capabilities. This adds a soc version detection adding specific limitations on the HDMI mode selections. Here, we limit to HDMI 1.2a max HDMI PHY clock frequency. Changes sinces v1: - Moved frequency check in the vclk code, and also checks DMT modes Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Acked-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> [narmstrong: fixed commit message with HDMI 1.2a instead of HDMI 1.3a] Link: https://patchwork.freedesktop.org/patch/msgid/20200428092147.13698-1-narmstrong@baylibre.com
-
Lubomir Rintel authored
This is a driver for video encoder with VGA and DVI/HDMI outputs. There is no documentation for the chip -- the operation was guessed from what was sniffed on a Dell Wyse 3020 ThinOS terminal, the register names come from the ch7035 driver in Mediatek's GPL code dump. Only bare minimum is implemented -- no fancy stuff, such as scaling. That would only worsen our misery. We don't load the firmware and we don't need to even bother enabling the MCU. There are probably no distributable firmware images anyway. Tested with a handful of monitors ranging from 1024x768@75 to 1400x1050@60, with VGA as well as DVI. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Acked-by:
-
Lubomir Rintel authored
Add binding document for the Chrontel CH7033 VGA/DVI/HDMI Encoder. Signed-off-by:
-
Lubomir Rintel authored
Chrontel makes encoders for video displays and perhaps other stuff. Their web site is http://www.chrontel.com/. Signed-off-by:
-
Tomi Valkeinen authored
AM65x PG1 has a HW issue with YUV pixel formats, resulting in wrong colors on the screen. This issue is fixed in PG2 hardware. The driver currently has code to hide YUV pixel formats from the userspace. To support PG2, we would need to add code to detect the SoC version and hide the YUV formats based on that. However, as PG1 will be phased out and PG2 will be the main platform, a much simpler solution is just to drop the code in question. The downside is that the users will be able to use YUV formats on PG1, getting wrong colors on the screen. On the other hand, that may also be a plus, as the same applications will now work on PG1 and PG2, even if the colors are wrong on PG1. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429121022.3871-1-tomi.valkeinen@ti.comReviewed-by:
Jyri Sarha <jsarha@ti.com>
-
Tomi Valkeinen authored
If the given videomode does not specify DISPLAY_FLAG_* for the specific signal property, the driver used a default value. These defaults were never thought through, as the expectation was that all the DISPLAY_FLAGS are always set explicitly. With DRM bridge and panel drivers this is not the case, and while that issue should be resolved in the future, it's still good to have sane signal defaults. This patch changes the defaults to what the hardware has as reset defaults. Also, based on my experience, I think they make sense and are more likely correct than the defaults without this patch. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
- 04 May, 2020 3 commits
-
-
David Lu authored
fix boe_tv105wum_nw0 display shift. Signed-off-by:
David Lu <david.lu@bitland.com.cn> Fixes: 963518c1 ("drm/panel: support for boe,tv105wum-nw0 dsi video mode panel") Cc: David Lu <david.lu@bitland.com.cn> Cc: Nicolas Boichat <drinkcat@chromium.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Adrian Ratiu authored
This converts the Synopsis MIPI DSI binding documentation to yaml and should be quite straightforward. I've added a missing ref clk and also added Philippe as maintainer b/c he's the original txt author following the algorithm provided in Message-ID 20200420175909.GA5810@ravnborg.org. Cc: Philippe CORNU <philippe.cornu@st.com> Cc: devicetree@vger.kernel.org Suggested-by:
Adrian Ratiu <adrian.ratiu@collabora.com> Signed-off-by:
-
Tomi Valkeinen authored
The AUO G101EVN010 is a 18-bit LVDS panel, not a parallel panel, as indicated by the current bus_format. Fix the bus_format to MEDIA_BUS_FMT_RGB666_1X7X3_SPWG, and also set the connector_type to LVDS. Signed-off-by:
-
- 02 May, 2020 2 commits
-
-
allen authored
Add a DT binding documentation for IT6505. Acked-by:
Allen Chen <allen.chen@ite.com.tw> Signed-off-by:
Pi-Hsun Shih <pihsun@chromium.org> Signed-off-by:
-
allen authored
ITE Tech. Inc. (abbreviated as ITE ) is a professional fabless IC design house. ITE's core technology includes PC and NB Controller chips, Super I/O, High Speed Serial Interface, Video Codec, Touch Sensing, Surveillance, OFDM, Sensor Fusion, and so on. Our official name is "ITE Tech. Inc.", so change "ITE," to "ITE.". more information on: http://www.ite.com.tw/Signed-off-by:
-
- 30 Apr, 2020 2 commits
-
-
Rodrigo Siqueira authored
In the file drm_dp_helper.h we have a macro named DP_DSC_THROUGHPUT_MODE_{0,1}_UPSUPPORTED, the correct name should be DP_DSC_THROUGHPUT_MODE_{0,1}_UNSUPPORTED. This commits adjusts this typo in the header file and in other places that attempt to access this macro. Reviewed-by:Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429184142.1867987-1-Rodrigo.Siqueira@amd.com
-
Jason Yan authored
The struct member 'set_config' was assigned twice: static const struct drm_crtc_funcs ast_crtc_funcs = { .reset = ast_crtc_reset, .set_config = drm_crtc_helper_set_config, ...... .set_config = drm_atomic_helper_set_config, ...... }; Since the second one is which we use now in fact, we can remove the first one. This fixes the following coccicheck warning: drivers/gpu/drm/ast/ast_mode.c:932:50-51: set_config: first occurrence line 934, second occurrence line 937 Signed-off-by:
-
- 29 Apr, 2020 4 commits
-
-
Arnd Bergmann authored
Some older versions of gcc badly optimize code that passes an inline function argument into another function by reference, causing huge stack usage: drivers/gpu/drm/bridge/tc358768.c: In function 'tc358768_bridge_pre_enable': drivers/gpu/drm/bridge/tc358768.c:840:1: error: the frame size of 2256 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] Use a temporary variable as a workaround and add a comment pointing to the gcc bug. Fixes: ff1ca639 ("drm/bridge: Add tc358768 driver") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Bartlomiej Zolnierkiewicz authored
powerpc allyesconfig fails like this: drivers/video/fbdev/controlfb.c: In function 'controlfb_mmap': drivers/video/fbdev/controlfb.c:756:23: error: implicit declaration of function 'pgprot_cached_wthru'; did you mean 'pgprot_cached'? [-Werror=implicit-function-declaration] 756 | vma->vm_page_prot = pgprot_cached_wthru(vma->vm_page_prot); | ^~~~~~~~~~~~~~~~~~~ | pgprot_cached drivers/video/fbdev/controlfb.c:756:23: error: incompatible types when assigning to type 'pgprot_t' {aka 'struct <anonymous>'} from type 'int' Fix it by adding missing PPC32 dependency. Fixes: a07a63b0 ("video: fbdev: controlfb: add COMPILE_TEST support") Reported-by:Stephen Rothwell <sfr@canb.auug.org.au> Reported-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Ville Syrjälä authored
Let's just calculate the hsync rate on demand. No point in wasting space storing it and risking the cached value getting out of sync with reality. v2: Move drm_mode_hsync() next to its only users Drop the TODO Reviewed-by:Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200428171940.19552-2-ville.syrjala@linux.intel.com
-
Thomas Zimmermann authored
MAINTAINERS got sorted in commit 4400b7d6 ("MAINTAINERS: sort entries by entry name") Merging from drm-next into drm-misc-next duplicated some of the entries by restoring old, unsorted sections. Restore the sorted list by removing the duplicates. Signed-off-by:
-
- 28 Apr, 2020 6 commits
-
-
Rob Herring authored
Since the VExpress setup in pl111_vexpress.c is now just a single function call, let's move it into pl111_versatile.c and we can further simplify pl111_versatile_init() by moving the other pieces for VExpress into pl111_vexpress_clcd_init(). Cc: Eric Anholt <eric@anholt.net> Cc: dri-devel@lists.freedesktop.org Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Rob Herring authored
The init VExpress variants currently instantiates a 'muxfpga' driver for the sole purpose of getting a regmap for it. There's no reason to instantiate a driver and doing so just complicates things. The muxfpga driver also isn't unregistered properly on module unload. Let's just simplify all this this by just calling devm_regmap_init_vexpress_config() directly. Cc: Eric Anholt <eric@anholt.net> Cc: dri-devel@lists.freedesktop.org Acked-by:
-
Rob Herring authored
Add a missing MODULE_DEVICE_TABLE entry to fix module autoloading. Cc: Eric Anholt <eric@anholt.net> Cc: dri-devel@lists.freedesktop.org Acked-by:
-
Daniel Vetter authored
Luckily we're already well set up in the main driver, with drm_dev_put() being the last thing in both the unload error case and the pci remove function. Acked-by:
Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-39-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Upcasting using a container_of macro is more typesafe, faster and easier for the compiler to optimize. Acked-by:
Gerd Hoffmann <kraxel@redhat.com> Acked-by:
-
Daniel Vetter authored
Also need to remove the drm_dev_put from the remove hook. Acked-by:
-
