- 11 Oct, 2015 6 commits
-
-
Matt Ranostay authored
Previous offset wasn't applied in the correct order and invalid. This patchset fixes this issue, and also has the correct scale value applied to the offset. Signed-off-by:
Matt Ranostay <mranostay@gmail.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Hugo Camboulive authored
This patch to ad7746.c makes the comment blocks end with a */ on a separate line, and start with a /* on an empty line. Signed-off-by:
Hugo Camboulive <hugo.camboulive@gmail.com> Signed-off-by:
-
Ludovic Tancerel authored
Support for MS8607 temperature, pressure & humidity sensor. This part is using functions from MS5637 for temperature and pressure and HTU21 for humidity Signed-off-by:
Ludovic Tancerel <ludovic.tancerel@maplehightech.com> Signed-off-by:
-
Ludovic Tancerel authored
Support for MS5637 temperature & pressure sensor Signed-off-by:
-
Ludovic Tancerel authored
Support for HTU21 temperature & humidity sensor Signed-off-by:
-
Ludovic Tancerel authored
Support for TSYS02D temperature sensor Signed-off-by:
-
- 04 Oct, 2015 2 commits
-
-
Ludovic Tancerel authored
Support for TSYS01 temperature sensor Signed-off-by:
-
Ludovic Tancerel authored
Measurement specialties drivers common part. These functions are used by further drivers in the patchset: TSYS01, TSYS02D, HTU21, MS5637, MS8607 Signed-off-by:
-
- 03 Oct, 2015 7 commits
-
-
Markus Pargmann authored
Add a simple SPI driver which initializes the spi regmap for the bmc150 core driver. Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> Signed-off-by:
-
Markus Pargmann authored
Signed-off-by:
Irina Tirdea <irina.tirdea@intel.com> Signed-off-by:
-
Markus Pargmann authored
i2c_client struct is now only used for debugging output. We can use the device struct as well so we can remove all struct i2c_client usage. Signed-off-by:
-
Markus Pargmann authored
This replaces all usage of direct i2c accesses with regmap accesses. Signed-off-by:
-
Octavian Purdila authored
Commit 845c8770 ("i2c / ACPI: Assign IRQ for devices that have GpioInt automatically") automatically assigns the first ACPI GPIO interrupt in client->irq, so we can remove the probing code from drivers that use only one interrupt. Signed-off-by:
Octavian Purdila <octavian.purdila@intel.com> Signed-off-by:
-
Octavian Purdila authored
Since commit dab472eb ("i2c / ACPI: Use 0 to indicate that device does not have interrupt assigned") 0 is not a valid i2c client irq anymore, so change all driver's checks accordingly. The same issue occurs when the device is instantiated via device tree with no IRQ, or from the i2c sysfs interface, even before the patch above. Signed-off-by:
-
Crt Mori authored
Dan Carpenter reported a static checker report and after his mail I noticed that we actually return from function if positive value is obtained from i2c read. This was remainder from when code was not in separate function (which I changed during the review process). Static checker reported drivers/iio/temperature/mlx90614.c:167 mlx90614_iir_search() warn: this cast is a no-op which meant that cast before negating is useless. Dan also proposed a solution on nicer bit operation form. Also changed magic number to macro in process as that was confusing. Reported-by:Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Crt Mori <cmo@melexis.com> Signed-off-by:
-
- 30 Sep, 2015 11 commits
-
-
Peter Rosin authored
Add support for Microchip digital potentiometers and rheostats MCP4531, MCP4532, MCP4551, MCP4552 MCP4631, MCP4632, MCP4651, MCP4652 DEVICE Wipers Steps Resistor Opts (kOhm) i2c address MCP4531 1 129 5, 10, 50, 100 010111x MCP4532 1 129 5, 10, 50, 100 01011xx MCP4551 1 257 5, 10, 50, 100 010111x MCP4552 1 257 5, 10, 50, 100 01011xx MCP4631 2 129 5, 10, 50, 100 0101xxx MCP4632 2 129 5, 10, 50, 100 01011xx MCP4651 2 257 5, 10, 50, 100 0101xxx MCP4652 2 257 5, 10, 50, 100 01011xx Datasheet: http://www.microchip.com/downloads/en/DeviceDoc/22096b.pdfSigned-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
-
Peter Rosin authored
Signed-off-by:
-
Matt Ranostay authored
The device tree compatible strings weren't properly registered for the pulsedlight-lidar-lite-v2 driver. Signed-off-by:
-
Matt Ranostay authored
Chipset sometime updates in the middle of a reading causing it to reset the data pointer, and causing invalid reading of previous data. We can check for this invalid state by reading MSB of the resistance reading that is always zero, and by also confirming the VOC_short isn't zero. Signed-off-by:
-
Martin Kepplinger authored
This shouldn't actually change anything since the core calls the events sysfs folder "events" anyways. Signed-off-by:
Martin Kepplinger <martink@posteo.de> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Martin Kepplinger authored
This shouldn't actually change anything since the core calls the events sysfs folder "events" anyways. Signed-off-by:
-
Martin Kepplinger authored
This shouldn't change anything since the core calls the events folder "events" anyways. Signed-off-by:
-
Shraddha Barke authored
Remove dev_info as the information can be obtained by other means Signed-off-by:
Shraddha Barke <shraddha.6596@gmail.com> Acked-by:
-
Shraddha Barke authored
Replace bit shifting on 1 with the BIT(x) macro Signed-off-by:
-
Greg Kroah-Hartman authored
handle_simple_irq() has dropped the first parameter, so fix it up in the iio_dummy_evgen.c driver to prevent the build from breaking. Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by:Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-4.4a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First round of new driver, new functionality and cleanups for IIO in the 4.4 cycle New device support * APDS9960 ALS + proximity driver * bmg160 SPI devices. * HDC100x humidity sensors * Holt HI-8435 threshold detector * mma8453Q accelerometer added to the mma8452 driver * mma86452FC and mma8653FC accelerometers added to the mma8452 driver * mxc4005 accelerometer * PulsedLight LIDAR * SensorTech VZ89x volatile organic compound sensor * UPISEMI uS5182d ALS and proximity sensors New core functionality * triggered events - use triggers to check for changes in threshold type detectors on devices with out interrupt support. First user is the holt comparator. * chemical concentration and resistance channel types. New driver functionality * vf610 - buffer support. - followup coccinelle warning fix. Core rework * buffers - break out callback buffer to own module. - move buffer implementations to a new subdirectory * percolate the error code form iio_event_getfd out to userspace rather than giving a missleading error later on. Cleanups * adddac drivers - use BIT macro where appropriate. * meter drivers - use BIT macro where appropriate. * ad7303 - add an OF match table to line up with the binding docs. * adc128s052 - add an OF match table to line up with the binding docs. * adf4350 - add an OF match table to line up with the binding docs * as3935 - add an OF match table to line up with the binding docs. * berlin2-adc - use GENMASK and BIT for masks - prevent attempting to sample multiple channels at once by moving a mutex scop - coding style cleanups * bmg150_magn - kconfig sort order was wrong - fix it. * bmg160 - use i2c regmap and drop all uses of i2c_client - separate i2c and core driver * cc10001_adc - kconfig sort order was wrong - fix it. * evgen (dummy driver helper module) - move interrupt generation to irq_work to reduce differences between the dummy driver and real hardware drivers. * hmc5843 - set the name dynamically rather than to a fixed value for one of the suported parts. - export module alias information to allow autoprobing of module. * lpc32xx - on failure to get resource or irq return -ENXIO as uppose to -EBUSY * max1027 - set .of_match_table to actually allow OF style matching. * max5821 - add MODULE_DEVICE_TABLE for OF table. * mma8452 - refactor to separate out chip specific data. - add freefall / motion interrupt source for devices that do their interrupts slightly differently. - update copywrite notice. - leave naming of events directory in sysfs to the core * mcp320x - set .of_match_table so that it can be use for OF style matching. * mlx90614 - Implement filter configuration (note the datasheet changed as a result of the driver reviews to include the values we needed ;) * opt3001 - drop .owner field as assigned by platform driver core. * si7020 - replace a bitmask on the humidity values with a more correct range check. * stk310 - improved error handling. - use BIT macro where appropriate and use the resulting defines instead of magic numbers in the code. - fix indentation * st-sensors - add debugfs register read hook * tsl4531 - fix error handling in check_id * twl6030 - fix module autoload for OF * iio-trig-sysfs - document add and remove attribute * trigger in staging - code alignment fixes. - braces on both branches of if statement if needed for one. * xilinx-xadc - push interrupts into hardirq context as there isn't much in them any more and it avoids breaking PREEMPT_RT builds due to the use of a spinlock between the hardirq and the thread. Tools * event-monitor - report unsupported events. We keep expanding what can come from drivers so give a helpful error if one turns up in an out of date userspace program. * generic-buffer - helpful message about needing to enable a channel to start the buffer.
-
- 29 Sep, 2015 14 commits
-
-
Oleg Drokin authored
All of them but the ccc_transient_page_prep are unused, so remove the unused ones. Signed-off-by:
Oleg Drokin <green@linuxhacker.ru> Signed-off-by:
-
Oleg Drokin authored
Does not appear to be used anywhere. Signed-off-by:
-
Oleg Drokin authored
These seem to be unused. Signed-off-by:
-
Oleg Drokin authored
This patch is a first stab at trying to remove structure fields from obd_export and obd structures that are only used on the server or make sense on the server. These include tracking requests in recovery, various recovery stages, lists of recovered and not yet recovered clients and so on. Also prune functions that use these fields. Signed-off-by:
-
Oleg Drokin authored
nid_hash is used on export to faster find clients based on their NID. There's no use for that on the client. Signed-off-by:
-
Oleg Drokin authored
Signed-off-by:
Oleg Drokin <oleg.drokin@intel.com> Signed-off-by:
-
Oleg Drokin authored
Since we know lcs_srv is always NULL, just get rid of it completely and fix up all the code to assumee it was never there. Signed-off-by:
-
Oleg Drokin authored
Also while we are at it, remove seq_site_fini forward declaration as there's no such function anymore. Signed-off-by:
-
Oleg Drokin authored
In fact they could be static as they are only used inside this file, so remove EXPORT_SYMBOL and declarations. Also seq_client_init is always called with srv = NULL, so just drop this argument. Signed-off-by:
-
Oleg Drokin authored
Those functions are not present anywhere in the client code. Signed-off-by:
-
Arnd Bergmann authored
This is a large patch to remove all dead code from obdclass and ptlrpc, purely removing functions and declarations now, so despite the size should be easy enough to verify. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Oleg Drokin authored
They are no longer used anywhere. Reported-by:
-
Oleg Drokin authored
Drop unused functions. Reported-by:
-
Oleg Drokin authored
These client request/import functions are not used anywhere, so drop them. Reported-by:
-
