Let's move the final newline printing in show_map_close_plain() at
the end of the function because it looks correct and consistent with
prog.c. Also let's do related changes for the line which prints
pinned file name.
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add support for recently added BPF_PROG_TYPE_CGROUP_SYSCTL program type
and BPF_CGROUP_SYSCTL attach type.

Example of bpftool output with sysctl program from selftests:

  # bpftool p load ./test_sysctl_prog.o /mnt/bpf/sysctl_prog type cgroup/sysctl
  # bpftool p l
  9: cgroup_sysctl  name sysctl_tcp_mem  tag 0dd05f81a8d0d52e  gpl
          loaded_at 2019-04-16T12:57:27-0700  uid 0
          xlated 1008B  jited 623B  memlock 4096B
  # bpftool c a /mnt/cgroup2/bla sysctl id 9
  # bpftool c t
  CgroupPath
  ID       AttachType      AttachFlags     Name
  /mnt/cgroup2/bla
      9        sysctl                          sysctl_tcp_mem
  # bpftool c d /mnt/cgroup2/bla sysctl id 9
  # bpftool c t
  CgroupPath
  ID       AttachType      AttachFlags     Name
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Using %ld for printing out value of ptrdiff_t type is not portable
between 32-bit and 64-bit archs. This is causing compilation errors for
libbpf on 32-bit platform (discovered as part of an effort to integrate
libbpf into systemd ([0])). Proper formatter is %td, which is used in
this patch.

v2->v1:
  - add Reported-by
  - provide more context on how this issue was discovered

[0] https://github.com/systemd/systemd/pull/12151Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

verifier.c uses BPF_CAST_CALL for casting bpf call except at one
place in jit_subprogs(). Let's use the macro for consistency.
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The helper function bpf_sock_ops_cb_flags_set() can be used to both
set and clear the sock_ops callback flags. However, its current
behavior is not consistent. BPF program may clear a flag if more than
one were set, or replace a flag with another one, but cannot clear all
flags.

This patch also updates the documentation to clarify the ability to
clear flags of this helper function.
Signed-off-by: Hoang Tran <hoang.tran@uclouvain.be>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch adds tests validating that VRF and BPF-LWT
encap work together well, as requested by David Ahern.
Signed-off-by: Peter Oskolkov <posk@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

commit f1a2e44a ("bpf: add queue and stack maps") introduced new BPF
helper functions:
- BPF_FUNC_map_push_elem
- BPF_FUNC_map_pop_elem
- BPF_FUNC_map_peek_elem

but they were made available only for network BPF programs. This patch
makes them available for tracepoint, cgroup and lirc programs.
Signed-off-by: Alban Crequy <alban@kinvolk.io>
Cc: Mauricio Vasquez B <mauricio.vasquez@polito.it>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Rewrite selftest to iterate over an array with input packet and
expected flow_keys. This should make it easier to extend this test
with additional cases without too much boilerplate.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add two tests to check that sequence of 1024 jumps is verifiable.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

avoids outputting a series of
	value:
	No space left on device

The value itself is not wrong but bpf_fd_reuseport_array_lookup_elem() can
only return it if the map was created with value_size = 8. There's nothing
bpftool can do about it. Instead of repeating this error for every key in
the map, print an explanatory warning and a specialized error.

example before:
key: 00 00 00 00
value:
No space left on device
key: 01 00 00 00
value:
No space left on device
key: 02 00 00 00
value:
No space left on device
Found 0 elements

example after:
Warning: cannot read values from reuseport_sockarray map with value_size != 8
key: 00 00 00 00  value: <cannot read>
key: 01 00 00 00  value: <cannot read>
key: 02 00 00 00  value: <cannot read>
Found 0 elements
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Commit bf598a8f ("bpftool: Improve handling of ENOENT on map dumps")
used print_entry_plain() in case of ENOENT. However, that commit introduces
dead code. Per-cpu maps are zero-filled. When reading them, it's all or
nothing. There will never be a case where some cpus have an entry and
others don't.

The truth is that ENOENT is an error case. Use print_entry_error() to
output the desired message. That function's "value" parameter is also
renamed to indicate that we never use it for an actual map value.

The output format is unchanged.
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Linux kernel now supports statistics for BPF programs, and bpftool is
able to dump them. However, these statistics are not enabled by default,
and administrators may not know how to access them.

Add a paragraph in bpftool documentation, under the description of the
"bpftool prog show" command, to explain that such statistics are
available and that their collection is controlled via a dedicated sysctl
knob.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Manual pages would tell that option "-v" (lower case) would print the
version number for bpftool. This is wrong: the short name of the option
is "-V" (upper case). Fix the documentation accordingly.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The "pinmaps" keyword is present in the man page, in the verbose
description of the "bpftool prog load" command. However, it is missing
from the summary of available commands at the beginning of the file. Add
it there as well.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

When trying to dump the tree of all cgroups under a given root node,
bpftool attempts to query programs of all available attach types. Some
of those attach types do not support queries, therefore several of the
calls are actually expected to fail.

Those calls set errno to EINVAL, which has no consequence for dumping
the rest of the tree. It does have consequences however if errno is
inspected at a later time. For example, bpftool batch mode relies on
errno to determine whether a command has succeeded, and whether it
should carry on with the next command. Setting errno to EINVAL when
everything worked as expected would therefore make such command fail:

        # echo 'cgroup tree \n net show' | \
                bpftool batch file -

To improve this, reset errno when its value is EINVAL after attempting
to show programs for all existing attach types in do_show_tree_fn().
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Commit 569b0c77 ("tools/bpftool: show btf id in program information")
made bpftool print an empty line after each program entry when listing
the BPF programs loaded on the system (plain output). This is especially
confusing when some programs have an associated BTF id, and others
don't. Let's remove the blank line.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The ENCAP flags in bpf_skb_adjust_room are ignored on decap with
bpf_skb_net_shrink. Reserve these bits for future use.

Fixes: 868d5235 ("bpf: add bpf_skb_adjust_room encap flags")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

replace tab after #define with space in line with rest of definitions
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

It was removed in commit 166b5a7f ("selftests_bpf: extend
test_tc_tunnel for UDP encap") without any explanation.

Otherwise I see:
progs/test_tc_tunnel.c:160:17: warning: taking address of packed member 'ip' of class or structure
      'v4hdr' may result in an unaligned pointer value [-Waddress-of-packed-member]
        set_ipv4_csum(&h_outer.ip);
                       ^~~~~~~~~~
1 warning generated.

Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Fixes: 166b5a7f ("selftests_bpf: extend test_tc_tunnel for UDP encap")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add test case verifying that dedup happens (INTs are deduped in this
case) and VAR/DATASEC types are not deduped, but have their referenced
type IDs adjusted correctly.

Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Yonghong Song <yhs@fb.com>
Cc: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This patch adds support for VAR and DATASEC in btf_dedup(). VAR/DATASEC
are never deduplicated, but they need to be processed anyway as types
they refer to might need to be remapped due to deduplication and
compaction.

Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Yonghong Song <yhs@fb.com>
Cc: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

When CONFIG_DEBUG_INFO_BTF is enabled but available version of pahole is too
old to support BTF generation, build script is supposed to emit warning and
proceed with the build. Due to using exit instead of return from BASH function,
existing handling code prematurely exits exit code 0, not completing some of
the build steps. This patch fixes issue by correctly returning just from
gen_btf() function only.

Fixes: e83b9f55 ("kbuild: add ability to generate BTF type info for vmlinux")
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

There are a few "regs[regno]" here are there across "check_reg_arg", this
patch factor it out into a simple "reg" pointer. The intention is to
simplify code indentation and make the later patches in this set look
cleaner.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

After code refactor in previous patches, the propagation logic inside the
for loop in "propagate_liveness" becomes clear that they are good enough to
be factored out into a common function "propagate_liveness_reg".
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Access to reg states were not factored out, the consequence is long code
for dereferencing them which made the indentation not good for reading.

This patch factor out these code so the core code in the loop could be
easier to follow.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Propagation for register and stack slot are finished in separate for loop,
while they are perfect to be put into a single loop.

This could also let them share some common variables in later patches.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Fix a new warning reported by kbuild for make ARCH=i386:

   In file included from kernel/bpf/cgroup.c:11:0:
   kernel/bpf/cgroup.c: In function '__cgroup_bpf_run_filter_sysctl':
   include/linux/kernel.h:827:29: warning: comparison of distinct pointer types lacks a cast
      (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
                                ^
   include/linux/kernel.h:841:4: note: in expansion of macro '__typecheck'
      (__typecheck(x, y) && __no_side_effects(x, y))
       ^~~~~~~~~~~
   include/linux/kernel.h:851:24: note: in expansion of macro '__safe_cmp'
     __builtin_choose_expr(__safe_cmp(x, y), \
                           ^~~~~~~~~~
   include/linux/kernel.h:860:19: note: in expansion of macro '__careful_cmp'
    #define min(x, y) __careful_cmp(x, y, <)
                      ^~~~~~~~~~~~~
>> kernel/bpf/cgroup.c:837:17: note: in expansion of macro 'min'
      ctx.new_len = min(PAGE_SIZE, *pcount);
                    ^~~

Fixes: 4e63acdf ("bpf: Introduce bpf_sysctl_{get,set}_new_value helpers")
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Andrey Ignatov says:

====================
v2->v3:
- simplify C based selftests by relying on variable offset stack access.

v1->v2:
- add fs/proc/proc_sysctl.c mainteners to Cc:.

The patch set introduces new BPF hook for sysctl.

It adds new program type BPF_PROG_TYPE_CGROUP_SYSCTL and attach type
BPF_CGROUP_SYSCTL.

BPF_CGROUP_SYSCTL hook is placed before calling to sysctl's proc_handler so
that accesses (read/write) to sysctl can be controlled for specific cgroup
and either allowed or denied, or traced.

The hook has access to sysctl name, current sysctl value and (on write
only) to new sysctl value via corresponding helpers. New sysctl value can
be overridden by program. Both name and values (current/new) are
represented as strings same way they're visible in /proc/sys/. It is up to
program to parse these strings.

To help with parsing the most common kind of sysctl value, vector of
integers, two new helpers are provided: bpf_strtol and bpf_strtoul with
semantic similar to user space strtol(3) and strtoul(3).

The hook also provides bpf_sysctl context with two fields:
* @write indicates whether sysctl is being read (= 0) or written (= 1);
* @file_pos is sysctl file position to read from or write to, can be
  overridden.

The hook allows to make better isolation for containerized applications
that are run as root so that one container can't change a sysctl and affect
all other containers on a host, make changes to allowed sysctl in a safer
way and simplify sysctl tracing for cgroups.

Patch 1 is preliminary refactoring.
Patch 2 adds new program and attach types.
Patches 3-5 implement helpers to access sysctl name and value.
Patch 6 adds file_pos field to bpf_sysctl context.
Patch 7 updates UAPI in tools.
Patches 8-9 add support for the new hook to libbpf and corresponding test.
Patches 10-14 add selftests for the new hook.
Patch 15 adds support for new arg types to verifier: pointer to integer.
Patch 16 adds bpf_strto{l,ul} helpers to parse integers from sysctl value.
Patch 17 updates UAPI in tools.
Patch 18 updates bpf_helpers.h.
Patch 19 adds selftests for pointer to integer in verifier.
Patches 20-21 add selftests for bpf_strto{l,ul}, including integration
              C based test for sysctl value parsing.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add C based test for a few bpf_sysctl_* helpers and bpf_strtoul.

Make sure that sysctl can be identified by name and that multiple
integers can be parsed from sysctl value with bpf_strtoul.

net/ipv4/tcp_mem is chosen as a testing sysctl, it contains 3 unsigned
longs, they all are parsed and compared (val[0] < val[1] < val[2]).

Example of output:
  # ./test_sysctl
  ...
  Test case: C prog: deny all writes .. [PASS]
  Test case: C prog: deny access by name .. [PASS]
  Test case: C prog: read tcp_mem .. [PASS]
  Summary: 39 PASSED, 0 FAILED
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Test that bpf_strtol and  bpf_strtoul helpers can be used to convert
provided buffer to long or unsigned long correspondingly and return both
correct result and number of consumed bytes, or proper errno.

Example of output:
  # ./test_sysctl
  ..
  Test case: bpf_strtoul one number string .. [PASS]
  Test case: bpf_strtoul multi number string .. [PASS]
  Test case: bpf_strtoul buf_len = 0, reject .. [PASS]
  Test case: bpf_strtoul supported base, ok .. [PASS]
  Test case: bpf_strtoul unsupported base, EINVAL .. [PASS]
  Test case: bpf_strtoul buf with spaces only, EINVAL .. [PASS]
  Test case: bpf_strtoul negative number, EINVAL .. [PASS]
  Test case: bpf_strtol negative number, ok .. [PASS]
  Test case: bpf_strtol hex number, ok .. [PASS]
  Test case: bpf_strtol max long .. [PASS]
  Test case: bpf_strtol overflow, ERANGE .. [PASS]
  Summary: 36 PASSED, 0 FAILED
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Test that verifier handles new argument types properly, including
uninitialized or partially initialized value, misaligned stack access,
etc.

Example of output:
  #456/p ARG_PTR_TO_LONG uninitialized OK
  #457/p ARG_PTR_TO_LONG half-uninitialized OK
  #458/p ARG_PTR_TO_LONG misaligned OK
  #459/p ARG_PTR_TO_LONG size < sizeof(long) OK
  #460/p ARG_PTR_TO_LONG initialized OK
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add bpf_sysctl_* and bpf_strtoX helpers to bpf_helpers.h.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Sync bpf_strtoX related bpf UAPI changes to tools/.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add bpf_strtol and bpf_strtoul to convert a string to long and unsigned
long correspondingly. It's similar to user space strtol(3) and
strtoul(3) with a few changes to the API:

* instead of NUL-terminated C string the helpers expect buffer and
  buffer length;

* resulting long or unsigned long is returned in a separate
  result-argument;

* return value is used to indicate success or failure, on success number
  of consumed bytes is returned that can be used to identify position to
  read next if the buffer is expected to contain multiple integers;

* instead of *base* argument, *flags* is used that provides base in 5
  LSB, other bits are reserved for future use;

* number of supported bases is limited.

Documentation for the new helpers is provided in bpf.h UAPI.

The helpers are made available to BPF_PROG_TYPE_CGROUP_SYSCTL programs to
be able to convert string input to e.g. "ulongvec" output.

E.g. "net/ipv4/tcp_mem" consists of three ulong integers. They can be
parsed by calling to bpf_strtoul three times.

Implementation notes:

Implementation includes "../../lib/kstrtox.h" to reuse integer parsing
functions. It's done exactly same way as fs/proc/base.c already does.

Unfortunately existing kstrtoX function can't be used directly since
they fail if any invalid character is present right after integer in the
string. Existing simple_strtoX functions can't be used either since
they're obsolete and don't handle overflow properly.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Currently the way to pass result from BPF helper to BPF program is to
provide memory area defined by pointer and size: func(void *, size_t).

It works great for generic use-case, but for simple types, such as int,
it's overkill and consumes two arguments when it could use just one.

Introduce new argument types ARG_PTR_TO_INT and ARG_PTR_TO_LONG to be
able to pass result from helper to program via pointer to int and long
correspondingly: func(int *) or func(long *).

New argument types are similar to ARG_PTR_TO_MEM with the following
differences:
* they don't require corresponding ARG_CONST_SIZE argument, predefined
  access sizes are used instead (32bit for int, 64bit for long);
* it's possible to use more than one such an argument in a helper;
* provided pointers have to be aligned.

It's easy to introduce similar ARG_PTR_TO_CHAR and ARG_PTR_TO_SHORT
argument types. It's not done due to lack of use-case though.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Test access to file_pos field of bpf_sysctl context, both read (incl.
narrow read) and write.

  # ./test_sysctl
  ...
  Test case: ctx:file_pos sysctl:read read ok .. [PASS]
  Test case: ctx:file_pos sysctl:read read ok narrow .. [PASS]
  Test case: ctx:file_pos sysctl:read write ok .. [PASS]
  ...
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Test that new value provided by user space on sysctl write can be read
by bpf_sysctl_get_new_value and overridden by bpf_sysctl_set_new_value.

  # ./test_sysctl
  ...
  Test case: sysctl_get_new_value sysctl:read EINVAL .. [PASS]
  Test case: sysctl_get_new_value sysctl:write ok .. [PASS]
  Test case: sysctl_get_new_value sysctl:write ok long .. [PASS]
  Test case: sysctl_get_new_value sysctl:write E2BIG .. [PASS]
  Test case: sysctl_set_new_value sysctl:read EINVAL .. [PASS]
  Test case: sysctl_set_new_value sysctl:write ok .. [PASS]
  Summary: 22 PASSED, 0 FAILED
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Test sysctl_get_current_value on sysctl read and write, buffers with
enough space and too small buffers to get E2BIG and truncated result,
etc.

  # ./test_sysctl
  ...
  Test case: sysctl_get_current_value sysctl:read ok, gt .. [PASS]
  Test case: sysctl_get_current_value sysctl:read ok, eq .. [PASS]
  Test case: sysctl_get_current_value sysctl:read E2BIG truncated ..  [PASS]
  Test case: sysctl_get_current_value sysctl:read EINVAL .. [PASS]
  Test case: sysctl_get_current_value sysctl:write ok .. [PASS]
  Summary: 16 PASSED, 0 FAILED
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Test w/ and w/o BPF_F_SYSCTL_BASE_NAME, buffers with enough space and
too small buffers to get E2BIG and truncated result, etc.

  # ./test_sysctl
  ...
  Test case: sysctl_get_name sysctl_value:base ok .. [PASS]
  Test case: sysctl_get_name sysctl_value:base E2BIG truncated .. [PASS]
  Test case: sysctl_get_name sysctl:full ok .. [PASS]
  Test case: sysctl_get_name sysctl:full E2BIG truncated .. [PASS]
  Test case: sysctl_get_name sysctl:full E2BIG truncated small .. [PASS]
  Summary: 11 PASSED, 0 FAILED
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add unit test for BPF_PROG_TYPE_CGROUP_SYSCTL program type.

Test that program can allow/deny access.
Test both valid and invalid accesses to ctx->write.

Example of output:
  # ./test_sysctl
  Test case: sysctl wrong attach_type .. [PASS]
  Test case: sysctl:read allow all .. [PASS]
  Test case: sysctl:read deny all .. [PASS]
  Test case: ctx:write sysctl:read read ok .. [PASS]
  Test case: ctx:write sysctl:write read ok .. [PASS]
  Test case: ctx:write sysctl:read write reject .. [PASS]
  Summary: 6 PASSED, 0 FAILED
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>