- 27 Jan, 2020 7 commits
-
-
Michael Ellerman authored
When we enable VMAP_STACK there will not be enough room for the alignment handler at 0x600 in head_8xx.S. For now move the tail of the alignment handler out of line, and branch to it. Suggested-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Christophe Leroy authored
Breakpoint exception is big. Split it to support future growth on exception prolog. Signed-off-by:
-
Christophe Leroy authored
Move DataStoreTLBMiss perf handler in order to cope with future growing exception prolog. Signed-off-by:
-
Christophe Leroy authored
head_8xx.S has entries for all exceptions from 0x100 to 0x1f00. Several of them do not exist and are never generated by the 8xx in accordance with the documentation. Remove those entry points to make some room for future growing exception code. Signed-off-by:
-
Christophe Leroy authored
In preparation of handling CONFIG_VMAP_STACK, DTLB miss handler need to use different scratch registers than other exception handlers in order to not jeopardise exception entry on stack DTLB misses. Signed-off-by:
-
Christophe Leroy authored
In order to also catch overflows on IRQ stacks, use vmapped stacks. Signed-off-by:
-
Christophe Leroy authored
To avoid recursive faults, stack overflow detection has to be performed before writing in the stack in exception prologs. Do it by checking the alignment. If the stack pointer alignment is wrong, it means it is pointing to the following or preceding page. Without VMAP stack, a stack overflow is catastrophic. With VMAP stack, a stack overflow isn't destructive, so don't panic. Kill the task with SIGSEGV instead. A dedicated overflow stack is set up for each CPU. lkdtm: Performing direct entry EXHAUST_STACK lkdtm: Calling function with 512 frame size to depth 32 ... lkdtm: loop 32/32 ... lkdtm: loop 31/32 ... lkdtm: loop 30/32 ... lkdtm: loop 29/32 ... lkdtm: loop 28/32 ... lkdtm: loop 27/32 ... lkdtm: loop 26/32 ... lkdtm: loop 25/32 ... lkdtm: loop 24/32 ... lkdtm: loop 23/32 ... lkdtm: loop 22/32 ... lkdtm: loop 21/32 ... lkdtm: loop 20/32 ... Kernel stack overflow in process test[359], r1=c900c008 Oops: Kernel stack overflow, sig: 6 [#1] BE PAGE_SIZE=4K MMU=Hash PowerMac Modules linked in: CPU: 0 PID: 359 Comm: test Not tainted 5.3.0-rc7+ #2225 NIP: c0622060 LR: c0626710 CTR: 00000000 REGS: c0895f48 TRAP: 0000 Not tainted (5.3.0-rc7+) MSR: 00001032 <ME,IR,DR,RI> CR: 28004224 XER: 00000000 GPR00: c0626ca4 c900c008 c783c000 c07335cc c900c010 c07335cc c900c0f0 c07335cc GPR08: c900c0f0 00000001 00000000 00000000 28008222 00000000 00000000 00000000 GPR16: 00000000 00000000 10010128 10010000 b799c245 10010158 c07335cc 00000025 GPR24: c0690000 c08b91d4 c068f688 00000020 c900c0f0 c068f668 c08b95b4 c08b91d4 NIP [c0622060] format_decode+0x0/0x4d4 LR [c0626710] vsnprintf+0x80/0x5fc Call Trace: [c900c068] [c0626ca4] vscnprintf+0x18/0x48 [c900c078] [c007b944] vprintk_store+0x40/0x214 [c900c0b8] [c007bf50] vprintk_emit+0x90/0x1dc [c900c0e8] [c007c5cc] printk+0x50/0x60 [c900c128] [c03da5b0] recursive_loop+0x44/0x6c [c900c338] [c03da5c4] recursive_loop+0x58/0x6c [c900c548] [c03da5c4] recursive_loop+0x58/0x6c [c900c758] [c03da5c4] recursive_loop+0x58/0x6c [c900c968] [c03da5c4] recursive_loop+0x58/0x6c [c900cb78] [c03da5c4] recursive_loop+0x58/0x6c [c900cd88] [c03da5c4] recursive_loop+0x58/0x6c [c900cf98] [c03da5c4] recursive_loop+0x58/0x6c [c900d1a8] [c03da5c4] recursive_loop+0x58/0x6c [c900d3b8] [c03da5c4] recursive_loop+0x58/0x6c [c900d5c8] [c03da5c4] recursive_loop+0x58/0x6c [c900d7d8] [c03da5c4] recursive_loop+0x58/0x6c [c900d9e8] [c03da5c4] recursive_loop+0x58/0x6c [c900dbf8] [c03da5c4] recursive_loop+0x58/0x6c [c900de08] [c03da67c] lkdtm_EXHAUST_STACK+0x30/0x4c [c900de18] [c03da3e8] direct_entry+0xc8/0x140 [c900de48] [c029fb40] full_proxy_write+0x64/0xcc [c900de68] [c01500f8] __vfs_write+0x30/0x1d0 [c900dee8] [c0152cb8] vfs_write+0xb8/0x1d4 [c900df08] [c0152f7c] ksys_write+0x58/0xe8 [c900df38] [c0014208] ret_from_syscall+0x0/0x34 --- interrupt: c01 at 0xf806664 LR = 0x1000c868 Instruction dump: 4bffff91 80010014 7c832378 7c0803a6 38210010 4e800020 3d20c08a 3ca0c089 8089a0cc 38a58f0c 38600001 4ba2d494 <9421ffe0> 7c0802a6 bfc10018 7c9f2378 Signed-off-by:
-
- 26 Jan, 2020 7 commits
-
-
Christophe Leroy authored
In order to ease stack overflow detection, align stack to 2 * THREAD_SIZE when using VMAP_STACK. This allows overflow detection using a single bit check. Signed-off-by:
-
Christophe Leroy authored
To support CONFIG_VMAP_STACK, the kernel has to activate Data MMU Translation for accessing the stack. Before doing that it must save SRR0, SRR1 and also DAR and DSISR when relevant, in order to not loose them in case there is a Data TLB Miss once the translation is reactivated. This patch adds fields in thread struct for saving those registers. It prepares entry_32.S to handle exception entry with Data MMU Translation enabled and alters EXCEPTION_PROLOG macros to save SRR0, SRR1, DAR and DSISR then reenables Data MMU. Signed-off-by:
-
Christophe Leroy authored
Refactor reading and saving of DAR and DSISR in exception vectors. This will ease the implementation of VMAP stack. Signed-off-by:
-
Christophe Leroy authored
In order to simplify VMAP stack implementation, move MSR_PR test into EXCEPTION_PROLOG_0. This requires to not modify cr0 between EXCEPTION_PROLOG_0 and EXCEPTION_PROLOG_1. Signed-off-by:
-
Christophe Leroy authored
handle_page_fault() is the only function that save DAR/DEAR itself. Save DAR/DEAR before calling handle_page_fault() to prepare for VMAP stack which will require to save even before. Signed-off-by:
-
Christophe Leroy authored
This patch creates a macro for the very first part of exception prolog, this will help when implementing CONFIG_VMAP_STACK Signed-off-by:
-
Christophe Leroy authored
On PPC32, MTMSRD() is simply defined as mtmsr. Replace MTMSRD(reg) by mtmsr reg in files dedicated to PPC32, this makes the code less obscure. Signed-off-by:
-
- 25 Jan, 2020 9 commits
-
-
Oliver O'Halloran authored
Some newer cards supported by aacraid can take up to 40s to recover after an EEH event. This causes spurious failures in the basic EEH self-test since the current maximim timeout is only 30s. Fix the immediate issue by bumping the timeout to a default of 60s, and allow the wait time to be specified via an environmental variable (EEH_MAX_WAIT). Reported-by:
Steve Best <sbest@redhat.com> Suggested-by:
Douglas Miller <dougmill@us.ibm.com> Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Signed-off-by:
-
Michael Bringmann authored
Correct overflow problem in calculation and display of Maximum Memory value to syscfg. Signed-off-by:
Michael Bringmann <mwb@linux.ibm.com> [mpe: Only n_lmbs needs casting to unsigned long] Signed-off-by:
-
Jordan Niethe authored
Commit a25bd72b ("powerpc/mm/radix: Workaround prefetch issue with KVM") introduced a number of workarounds as coming out of a guest with the mmu enabled would make the cpu would start running in hypervisor state with the PID value from the guest. The cpu will then start prefetching for the hypervisor with that PID value. In Power9 DD2.2 the cpu behaviour was modified to fix this. When accessing Quadrant 0 in hypervisor mode with LPID != 0 prefetching will not be performed. This means that we can get rid of the workarounds for Power9 DD2.2 and later revisions. Add a new cpu feature CPU_FTR_P9_RADIX_PREFETCH_BUG to indicate if the workarounds are needed. Signed-off-by:
Jordan Niethe <jniethe5@gmail.com> Acked-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Vaibhav Jain authored
String 'bus_desc.provider_name' allocated inside papr_scm_nvdimm_init() will leaks in case call to nvdimm_bus_register() fails or when papr_scm_remove() is called. This minor patch ensures that 'bus_desc.provider_name' is freed in error path for nvdimm_bus_register() as well as in papr_scm_remove(). Fixes: b5beae5e ("powerpc/pseries: Add driver for PAPR SCM regions") Signed-off-by:
Vaibhav Jain <vaibhav@linux.ibm.com> Signed-off-by:
-
Sukadev Bhattiprolu authored
Fix couple of compile errors I stumbled upon with CONFIG_XMON=y and CONFIG_XMON_DISASSEMBLY=n Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by:
-
Christophe Leroy authored
Instead of opencoding, use probe_user_read() to failessly read a user location and probe_user_write() for writing to user. Signed-off-by:
-
Chen Zhou authored
Fixes coccicheck warning: arch/powerpc/platforms/maple/setup.c:232:15-16: WARNING comparing pointer to 0 Compare pointer-typed values to NULL rather than 0. Signed-off-by:
Chen Zhou <chenzhou10@huawei.com> Signed-off-by:
-
Tyrel Datwyler authored
Commit e5afdf9d ("powerpc/vfio_spapr_tce: Add reference counting to iommu_table") missed an iommu_table allocation in the pseries vio code. The iommu_table is allocated with kzalloc and as a result the associated kref gets a value of zero. This has the side effect that during a DLPAR remove of the associated virtual IOA the iommu_tce_table_put() triggers a use-after-free underflow warning. Call Trace: [c0000002879e39f0] [c00000000071ecb4] refcount_warn_saturate+0x184/0x190 (unreliable) [c0000002879e3a50] [c0000000000500ac] iommu_tce_table_put+0x9c/0xb0 [c0000002879e3a70] [c0000000000f54e4] vio_dev_release+0x34/0x70 [c0000002879e3aa0] [c00000000087cfa4] device_release+0x54/0xf0 [c0000002879e3b10] [c000000000d64c84] kobject_cleanup+0xa4/0x240 [c0000002879e3b90] [c00000000087d358] put_device+0x28/0x40 [c0000002879e3bb0] [c0000000007a328c] dlpar_remove_slot+0x15c/0x250 [c0000002879e3c50] [c0000000007a348c] remove_slot_store+0xac/0xf0 [c0000002879e3cd0] [c000000000d64220] kobj_attr_store+0x30/0x60 [c0000002879e3cf0] [c0000000004ff13c] sysfs_kf_write+0x6c/0xa0 [c0000002879e3d10] [c0000000004fde4c] kernfs_fop_write+0x18c/0x260 [c0000002879e3d60] [c000000000410f3c] __vfs_write+0x3c/0x70 [c0000002879e3d80] [c000000000415408] vfs_write+0xc8/0x250 [c0000002879e3dd0] [c0000000004157dc] ksys_write+0x7c/0x120 [c0000002879e3e20] [c00000000000b278] system_call+0x5c/0x68 Further, since the refcount was always zero the iommu_tce_table_put() fails to call the iommu_table release function resulting in a leak. Fix this issue be initilizing the iommu_table kref immediately after allocation. Fixes: e5afdf9d ("powerpc/vfio_spapr_tce: Add reference counting to iommu_table") Signed-off-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Reviewed-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
Aneesh Kumar K.V authored
Setting ND_REGION_PAGEMAP flag implies namespace mode defaults to fsdax mode. This also means kernel ends up creating struct page backing for these namspace ranges. With large namespaces that is not the right thing to do. We should let the user select the mode he/she wants the namespace to be created with. Hence disable ND_REGION_PAGEMAP for papr_scm regions. We still keep the flag for of_pmem because it supports only small persistent memory regions. This is similar to what is done for x86 with commit commit: 004f1afb ("libnvdimm, pmem: direct map legacy pmem by default") Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
- 23 Jan, 2020 17 commits
-
-
Greg Kurz authored
As reported by ./scripts/checkpatch.pl --strict: CHECK: extern prototypes should be avoided in .h files Signed-off-by:
Greg Kurz <groug@kaod.org> Signed-off-by:
-
Greg Kurz authored
Signed-off-by:
-
Krzysztof Kozlowski authored
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Laurentiu Tudor authored
Michael Ellerman made a call for volunteers from NXP to maintain this driver and I offered myself. Signed-off-by:
Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by:
Timur Tabi <timur@kernel.org> Signed-off-by:
-
Oliver O'Halloran authored
This is only used in pci-ioda.c so move it there and rename it to match. Signed-off-by:
-
Oliver O'Halloran authored
pnv_pci_dma_dev_setup() does nothing but call the phb->dma_dev_setup() callback, if one exists. That callback is only set for normal PCIe PHBs so we can remove the layer of indirection and use the ioda version in the pci_controller_ops. Signed-off-by:
-
Oliver O'Halloran authored
An ioda_pe for each VF is allocated in pnv_pci_sriov_enable() before the pci_dev for the VF is created. We need to set the pe->pdev pointer at some point after the pci_dev is created. Currently we do that in: pcibios_bus_add_device() pnv_pci_dma_dev_setup() (via phb->ops.dma_dev_setup) /* fixup is done here */ pnv_pci_ioda_dma_dev_setup() (via pnv_phb->dma_dev_setup) The fixup needs to be done before setting up DMA for for the VF's PE, but there's no real reason to delay it until this point. Move the fixup into pnv_pci_ioda_fixup_iov() so the ordering is: pcibios_add_device() pnv_pci_ioda_fixup_iov() (via ppc_md.pcibios_fixup_sriov) pcibios_bus_add_device() ... This isn't strictly required, but it's a slightly more logical place to do the fixup and it simplifies pnv_pci_dma_dev_setup(). Signed-off-by:
-
Oliver O'Halloran authored
The pnv_pci_dma_dev_setup() only does something when: 1) There PHB contains VFs, or 2) The PHB defines a dma_dev_setup() callback in the pnv_phb structure. Neither is true for NPU PHBs so there's no reason to set the callback. Reviewed-by:
-
Oliver O'Halloran authored
pcibios_bus_add_device() is the only caller of pcibios_setup_device(). Fold them together since there's no real reason to keep them separate. Signed-off-by:
-
Oliver O'Halloran authored
OPAL provides several different kinds of reboot for the kernel to use, namely forcing a full reboot, platform error reboot and MPIPL. Right now triggering the alternative resets requires some ad-hoc method such as triggering a kernel crash and hoping the stars align. It's sometimes handy to be able to trigger one of these resets directly, so add a way to do that. Signed-off-by:
-
Oliver O'Halloran authored
On PowerNV a few different kinds of reboot are supported. We'd like to be able to exercise these from xmon so allow 'zr' to take an argument, and pass that to the ppc_md.restart() function. Signed-off-by:
-
Oliver O'Halloran authored
Long before we had a generic way for firmware to export memory ranges of interest we added a special case for the skiboot symbol map. The code is pretty much identical to the generic export so re-use the code. Signed-off-by:
-
Oliver O'Halloran authored
Originally we only had a handful of exported memory ranges, but we'd to export the per-core trace buffers. This results in a lot of files in the exports directory which is a but unfortunate. We can clean things up a bit by turning subnodes into subdirectories of the exports directory. Signed-off-by:
-
Oliver O'Halloran authored
Many drivers don't check for errors when they get a 0xFFs response from an MMIO load. As a result after an EEH event occurs a driver can get stuck in a polling loop unless it some kind of internal timeout logic. Currently EEH tries to detect and report stuck drivers by dumping a stack trace after eeh_dev_check_failure() is called EEH_MAX_FAILS times on an already frozen PE. The value of EEH_MAX_FAILS was chosen so that a dump would occur every few seconds if the driver was spinning in a loop. This results in a lot of spurious stack traces in the kernel log. Fix this by limiting it to printing one stack trace for each PE freeze. If the driver is truely stuck the kernel's hung task detector is better suited to reporting the probelm anyway. Signed-off-by:
Sam Bobroff <sbobroff@linux.ibm.com> Tested-by:
-
Oliver O'Halloran authored
Add a debugfs entry to dump the state of the active IODA PEs. The IODA PE state reflects how the PHB's internal concept of a PE is configured. This is separate to the EEH PE state and is managed power the PowerNV PCI backend rather than the EEH core. Signed-off-by:
-
Oliver O'Halloran authored
Make the dump trigger off any input rather than just '1'. This allows you to write "echo 1> dump_diag_data" and it'll do what you want rather than erroring out pointlessly. Signed-off-by:
-
Oliver O'Halloran authored
Use the pnv_phb structure as the private data pointer for the debugfs files. This lets us delete some code and an open-coded use of hose->private_data. Signed-off-by:
-
