- 09 Mar, 2010 5 commits
-
-
Christian Lamparter authored
P54 devices always generate a full tx_status report (ACK, PSM, rate control, etc..) for every xmitted frame. Therefore, I think The driver qualifies for the REPORTS_TX_ACK_STATUS hardware feature flag. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Pavel Roskin authored
ath5k_hw_register_timeout() was duplicated between phy.c and reset.c. Since it is too big and too much used to be an inline function, move it away from the ath5k.h header into reset.c. Remove _ATH5K_RESET and _ATH5K_PHY defines. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Pavel Roskin authored
Adjust formatting of the affected lines to satisfy checkpatch.pl. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Pavel Roskin authored
Remove all unnecessary function declarations from ath5k.h. Comment out unused functions. Remove ath5k_hw_get_tsf32(), which is too trivial to be commented out. Make functions static if suggested by sparse. Make ath5k_pm_ops static. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
The noise value as is won't be used, isn't filled by most drivers and doesn't really make a whole lot of sense on a per packet basis -- proper cfg80211 survey support in mac80211 will need to be different. Mark the struct member as deprecated so it will be removed from drivers. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 03 Mar, 2010 2 commits
-
-
Helmut Schaa authored
Export rt2x00soc_probe from rt2x00soc as it is used in rt2800pci. Otherwise loading rt2800pci gives "rt2800pci: Unknown symbol rt2x00soc_probe". Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith authored
Handling HT configuration changes involved setting the channel with the new HT parameters and then issuing a rate_update() notification to the driver. This behavior changed after the off-channel changes. Now, the channel is not updated with the new HT params in enable_ht() - instead, it is now done when the scan work terminates. This results in the driver depending on stale information, defaulting to non-HT mode always. Fix this by passing the new channel type to the driver. Cc: stable@kernel.org Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 02 Mar, 2010 14 commits
-
-
Johannes Berg authored
At the wireless summit in Portland we discussed a way of loading firmware asynchronously from ->probe() before registration to mac80211, in order to register with the wireless subsystems with complete information in cases where firmware is required to know parameters. This is not yet the case in iwlwifi, but for some new features we're working on it will be the case since those will only be supported by new firmware images. Hence, to start with, convert iwlwifi to load firmware asynchronously from probe, unbinding the device when firmware loading fails, and only registering with the wireless subsystems after firmware has been loaded successfully. Future patches will hook into this to register the new firmware capabilities, depending on the firmware API version. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
This converts ar9170 to load firmware asynchronously out of ->probe() and only register with mac80211 when all firmware has been loaded successfully. If, on the other hand, any firmware fails to load, it will now unbind from the device. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Helmut Schaa authored
Compiling rt2800pci with CONFIG_RT2800PCI_SOC fails with "... rt2880pci.c: error: incompatible type for argument 2 of 'rt2x00soc_probe'". Fix this by using &rt2800pci_ops instead of rt2800pci_ops. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Bryan Polk authored
This adds support for CEIVA USB wireless adapters to the rt73usb driver. Signed-off-by: Bryan Polk <sainth@eidolons.org> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Jouni Malinen authored
Commit e1dd33f60ced091114e4aacf141e0d03b88d3e13 changed cfg80211 to allow association commands while in associated state to enable support for roaming within an ESS. However, this was not enough to resolve all cases with mac80211 which needs some additional handling of the reassociation case to clear internal state with the BSS that was in use previously. This patch makes ieee80211_mgd_assoc() accept a valid reassociation command and clean the association state with the previous BSS. This fixes roaming between BSSes in an ESS when using wpa_supplicant with -Dnl80211. Signed-off-by: Jouni Malinen <j@w1.fi> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ming Lei authored
Since txq->axq_lock may be hold in softirq context, it must be acquired with spin_lock_bh() instead of spin_lock() if softieq is enabled. The patch fixes the lockdep warning below when unloading ath9k modules. ================================= [ INFO: inconsistent lock state ] 2.6.33-wl #12 --------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. rmmod/3642 [HC0[0]:SC0[0]:HE1:SE1] takes: (&(&txq->axq_lock)->rlock){+.?...}, at: [<ffffffffa03568c3>] ath_tx_node_cleanup+0x62/0x180 [ath9k] {IN-SOFTIRQ-W} state was registered at: [<ffffffff8107577d>] __lock_acquire+0x2f6/0xd35 [<ffffffff81076289>] lock_acquire+0xcd/0xf1 [<ffffffff813a7486>] _raw_spin_lock_bh+0x3b/0x6e [<ffffffffa0356b49>] spin_lock_bh+0xe/0x10 [ath9k] [<ffffffffa0358ec7>] ath_tx_tasklet+0xcd/0x391 [ath9k] [<ffffffffa0354f5f>] ath9k_tasklet+0x70/0xc8 [ath9k] [<ffffffff8104e601>] tasklet_action+0x8c/0xf4 [<ffffffff8104f459>] __do_softirq+0xf8/0x1cd [<ffffffff8100ab1c>] call_softirq+0x1c/0x30 [<ffffffff8100c2cf>] do_softirq+0x4b/0xa3 [<ffffffff8104f045>] irq_exit+0x4a/0x8c [<ffffffff813acccc>] do_IRQ+0xac/0xc3 [<ffffffff813a7d53>] ret_from_intr+0x0/0x16 [<ffffffff81302d52>] cpuidle_idle_call+0x9e/0xf8 [<ffffffff81008be7>] cpu_idle+0x62/0x9d [<ffffffff81391c1a>] rest_init+0x7e/0x80 [<ffffffff818bbd38>] start_kernel+0x3e8/0x3f3 [<ffffffff818bb2bc>] x86_64_start_reservations+0xa7/0xab [<ffffffff818bb3b8>] x86_64_start_kernel+0xf8/0x107 irq event stamp: 42037 hardirqs last enabled at (42037): [<ffffffff813a7b21>] _raw_spin_unlock_irqrestore+0x47/0x56 hardirqs last disabled at (42036): [<ffffffff813a72f4>] _raw_spin_lock_irqsave+0x2b/0x88 softirqs last enabled at (42000): [<ffffffffa0353ea6>] spin_unlock_bh+0xe/0x10 [ath9k] softirqs last disabled at (41998): [<ffffffff813a7463>] _raw_spin_lock_bh+0x18/0x6e other info that might help us debug this: 4 locks held by rmmod/3642: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff8132c10d>] rtnl_lock+0x17/0x19 #1: (&wdev->mtx){+.+.+.}, at: [<ffffffffa01e53f2>] cfg80211_netdev_notifier_call+0x28d/0x46d [cfg80211] #2: (&ifmgd->mtx){+.+.+.}, at: [<ffffffffa0260834>] ieee80211_mgd_deauth+0x3f/0x17e [mac80211] #3: (&local->sta_mtx){+.+.+.}, at: [<ffffffffa025a381>] sta_info_destroy_addr+0x2b/0x5e [mac80211] stack backtrace: Pid: 3642, comm: rmmod Not tainted 2.6.33-wl #12 Call Trace: [<ffffffff81074469>] valid_state+0x178/0x18b [<ffffffff81014f94>] ? save_stack_trace+0x2f/0x4c [<ffffffff81074e08>] ? check_usage_backwards+0x0/0x88 [<ffffffff8107458f>] mark_lock+0x113/0x230 [<ffffffff810757f1>] __lock_acquire+0x36a/0xd35 [<ffffffff8101018d>] ? native_sched_clock+0x2d/0x5f [<ffffffffa03568c3>] ? ath_tx_node_cleanup+0x62/0x180 [ath9k] [<ffffffff81076289>] lock_acquire+0xcd/0xf1 [<ffffffffa03568c3>] ? ath_tx_node_cleanup+0x62/0x180 [ath9k] [<ffffffff810732eb>] ? trace_hardirqs_off+0xd/0xf [<ffffffff813a7193>] _raw_spin_lock+0x36/0x69 [<ffffffffa03568c3>] ? ath_tx_node_cleanup+0x62/0x180 [ath9k] [<ffffffffa03568c3>] ath_tx_node_cleanup+0x62/0x180 [ath9k] [<ffffffff810749ed>] ? trace_hardirqs_on+0xd/0xf [<ffffffffa0353950>] ath9k_sta_remove+0x22/0x26 [ath9k] [<ffffffffa025a08f>] __sta_info_destroy+0x1ad/0x38c [mac80211] [<ffffffffa025a394>] sta_info_destroy_addr+0x3e/0x5e [mac80211] [<ffffffffa02605d6>] ieee80211_set_disassoc+0x175/0x180 [mac80211] [<ffffffffa026084d>] ieee80211_mgd_deauth+0x58/0x17e [mac80211] [<ffffffff813a60c1>] ? __mutex_lock_common+0x37f/0x3a4 [<ffffffffa01e53f2>] ? cfg80211_netdev_notifier_call+0x28d/0x46d [cfg80211] [<ffffffffa026786e>] ieee80211_deauth+0x1e/0x20 [mac80211] [<ffffffffa01f47f9>] __cfg80211_mlme_deauth+0x130/0x13f [cfg80211] [<ffffffffa01e53f2>] ? cfg80211_netdev_notifier_call+0x28d/0x46d [cfg80211] [<ffffffff810732eb>] ? trace_hardirqs_off+0xd/0xf [<ffffffffa01f7eee>] __cfg80211_disconnect+0x111/0x189 [cfg80211] [<ffffffffa01e5433>] cfg80211_netdev_notifier_call+0x2ce/0x46d [cfg80211] [<ffffffff813aa9ea>] notifier_call_chain+0x37/0x63 [<ffffffff81068c98>] raw_notifier_call_chain+0x14/0x16 [<ffffffff81322e97>] call_netdevice_notifiers+0x1b/0x1d [<ffffffff8132386d>] dev_close+0x6a/0xa6 [<ffffffff8132395f>] rollback_registered_many+0xb6/0x2f4 [<ffffffff81323bb8>] unregister_netdevice_many+0x1b/0x66 [<ffffffffa026494f>] ieee80211_remove_interfaces+0xc5/0xd0 [mac80211] [<ffffffffa02580a2>] ieee80211_unregister_hw+0x47/0xe8 [mac80211] [<ffffffffa035290e>] ath9k_deinit_device+0x7a/0x9b [ath9k] [<ffffffffa035bc26>] ath_pci_remove+0x38/0x76 [ath9k] [<ffffffff8120940a>] pci_device_remove+0x2d/0x51 [<ffffffff8129d797>] __device_release_driver+0x7b/0xd1 [<ffffffff8129d885>] driver_detach+0x98/0xbe [<ffffffff8129ca7a>] bus_remove_driver+0x94/0xb7 [<ffffffff8129ddd6>] driver_unregister+0x6c/0x74 [<ffffffff812096d2>] pci_unregister_driver+0x46/0xad [<ffffffffa035bae1>] ath_pci_exit+0x15/0x17 [ath9k] [<ffffffffa035e1a2>] ath9k_exit+0xe/0x2f [ath9k] [<ffffffff8108050a>] sys_delete_module+0x1c7/0x236 [<ffffffff813a7df5>] ? retint_swapgs+0x13/0x1b [<ffffffff810749b5>] ? trace_hardirqs_on_caller+0x119/0x144 [<ffffffff8109b9f6>] ? audit_syscall_entry+0x11e/0x14a [<ffffffff81009bb2>] system_call_fastpath+0x16/0x1b wlan1: deauthenticating from 00:23:cd:e1:f9:b2 by local choice (reason=3) PM: Removing info for No Bus:wlan1 cfg80211: Calling CRDA to update world regulatory domain PM: Removing info for No Bus:rfkill2 PM: Removing info for No Bus:phy1 ath9k 0000:16:00.0: PCI INT A disabled Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Dan Carpenter authored
The first chunk fixes a debugging assert to print a warning about array underflows. The second chunk corrects a potential array underflow. I also removed an assert in the second chunk because it can no longer happen. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Benoit Papillault <benoit.papillault@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Matthew Garrett authored
Add support for handling KEY_RFKILL in the rfkill input module. This simply toggles the state of all rfkill devices. The comment in rfkill.h is also updated to reflect that RFKILL_TYPE_ALL may be used inside the kernel. Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Stanislaw Gruszka authored
Even if keylen == 0 is a bug and should not really happen, better avoid possibility of passing bad value to firmware. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Jiri Pirko authored
This is no longer needed. I missed to remove this in 567ec874 ("net: convert multiple drivers to use netdev_for_each_mc_addr, part6") Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
In tx/mcc polling, napi_complete() is being incorrectly called before reaping tx completions. This can cause tx compl processing to be scheduled on another cpu concurrently which can result in a panic. This if fixed by calling napi complete() after tx/mcc compl processing but before re-enabling interrupts (via a cq notify). Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herton Ronaldo Krzesinski authored
Some sis190 devices don't report LinkChange, so do polling for link status. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11926Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Commit e992cd9b (kmemcheck: make bitfield annotations truly no-ops when disabled) allows us to revert a workaround we did in the past to not add holes in sk_buff structure. This patch partially reverts commit 14d18a81 (net: fix kmemcheck annotations) so that sparse doesnt complain: include/linux/skbuff.h:357:41: error: invalid bitfield specifier for type restricted __be16. Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sridhar Samudrala authored
Fix the following build error when IGMP_SNOOPING is not enabled. In file included from net/bridge/br.c:24: net/bridge/br_private.h: In function 'br_multicast_is_router': net/bridge/br_private.h:361: error: 'struct net_bridge' has no member named 'multicast_router' net/bridge/br_private.h:362: error: 'struct net_bridge' has no member named 'multicast_router' net/bridge/br_private.h:363: error: 'struct net_bridge' has no member named 'multicast_router_timer' Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 01 Mar, 2010 3 commits
-
-
David S. Miller authored
Conflicts: drivers/firmware/iscsi_ibft.c
-
Vladislav Zolotarov authored
[Resending with the proper subject. Sorry for the mess. ] This patch is based on the RFC of Stanislaw Gruszka. More specifically it fixes two possible races: - One, described by Stanislaw, may lead to permanent disabling of the Tx queue. This is fixed by adding the smp_wmb() to propagate the BD consumer change towards the memory. - Second may lead to bnx2x_start_xmit() returning NETDEV_TX_BUSY. This is fixed by taking a tx_lock() before rechecking the number of available Tx BDs. thanks, vlad Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
We use scm_send and scm_recv on both unix domain and netlink sockets, but only unix domain sockets support everything required for file descriptor passing, so error if someone attempts to pass file descriptors over netlink sockets. Cc: stable@kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 28 Feb, 2010 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds authored
* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, uv: Remove recursion in uv_heartbeat_enable() x86, uv: uv_global_gru_mmr_address() macro fix x86, uv: Add serial number parameter to uv_bios_get_sn_info()
-
Linus Torvalds authored
Merge branch 'x86-ptrace-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-ptrace-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, ptrace: Remove set_stopped_child_used_math() in [x]fpregs_set x86, ptrace: Simplify xstateregs_get() ptrace: Fix ptrace_regset() comments and diagnose errors specifically parisc: Disable CONFIG_HAVE_ARCH_TRACEHOOK ptrace: Add support for generic PTRACE_GETREGSET/PTRACE_SETREGSET x86, ptrace: regset extensions to support xstate
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds authored
* 'x86-pci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Enable NMI on all cpus on UV vgaarb: Add user selectability of the number of GPUS in a system vgaarb: Fix VGA arbiter to accept PCI domains other than 0 x86, uv: Update UV arch to target Legacy VGA I/O correctly. pci: Update pci_set_vga_state() to call arch functions
-
Linus Torvalds authored
Merge branch 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, setup: Don't skip mode setting for the standard VGA modes x86-64, setup: Inhibit decompressor output if video info is invalid x86, setup: When restoring the screen, update boot_params.screen_info
-
Linus Torvalds authored
Merge branch 'x86-rwsem-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-rwsem-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86-64, rwsem: Avoid store forwarding hazard in __downgrade_write x86-64, rwsem: 64-bit xadd rwsem implementation x86: Fix breakage of UML from the changes in the rwsem system x86-64: support native xadd rwsem implementation x86: clean up rwsem type system
-
Linus Torvalds authored
Merge branch 'x86-numa-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-numa-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, numa: Remove configurable node size support for numa emulation x86, numa: Add fixed node size option for numa emulation x86, numa: Fix numa emulation calculation of big nodes x86, acpi: Map hotadded cpu to correct node.
-
Linus Torvalds authored
Merge branch 'x86-mtrr-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-mtrr-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Convert set_atomicity_lock to raw_spinlock x86, mtrr: Kill over the top warn x86, mtrr: Constify struct mtrr_ops
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds authored
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, mm: Unify kernel_physical_mapping_init() API x86, mm: Allow highmem user page tables to be disabled at boot time x86: Do not reserve brk for DMI if it's not going to be used x86: Convert tlbstate_lock to raw_spinlock x86: Use the generic page_is_ram() x86: Remove BIOS data range from e820 Move page_is_ram() declaration to mm.h Generic page_is_ram: use __weak resources: introduce generic page_is_ram()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds authored
* 'x86-io-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Merge io.h x86: Simplify flush_write_buffers() x86: Clean up mem*io functions. x86-64: Use BUILDIO in io_64.h x86-64: Reorganize io_64.h x86-32: Remove _local variants of in/out from io_32.h x86-32: Move XQUAD definitions to numaq.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds authored
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, cacheinfo: Enable L3 CID only on AMD x86, cacheinfo: Remove NUMA dependency, fix for AMD Fam10h rev D1 x86, cpu: Print AMD virtualization features in /proc/cpuinfo x86, cacheinfo: Calculate L3 indices x86, cacheinfo: Add cache index disable sysfs attrs only to L3 caches x86, cacheinfo: Fix disabling of L3 cache indices intel-agp: Switch to wbinvd_on_all_cpus x86, lib: Add wbinvd smp helpers
-
Linus Torvalds authored
Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Remove trailing spaces in messages x86, mtrr: Remove unused mtrr/state.c x86, trivial: Fix grammo in tsc comment about Geode TSC reliability
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds authored
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Mark atomic irq ops raw for 32bit legacy x86: Merge show_regs() x86: Macroise x86 cache descriptors x86-32: clean up rwsem inline asm statements x86: Merge asm/atomic_{32,64}.h x86: Sync asm/atomic_32.h and asm/atomic_64.h x86: Split atomic64_t functions into seperate headers x86-64: Modify memcpy()/memset() alternatives mechanism x86-64: Modify copy_user_generic() alternatives mechanism x86: Lift restriction on the location of FIX_BTMAP_* x86, core: Optimize hweight32()
-
Linus Torvalds authored
Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (25 commits) sched: Fix SCHED_MC regression caused by change in sched cpu_power sched: Don't use possibly stale sched_class kthread, sched: Remove reference to kthread_create_on_cpu sched: cpuacct: Use bigger percpu counter batch values for stats counters percpu_counter: Make __percpu_counter_add an inline function on UP sched: Remove member rt_se from struct rt_rq sched: Change usage of rt_rq->rt_se to rt_rq->tg->rt_se[cpu] sched: Remove unused update_shares_locked() sched: Use for_each_bit sched: Queue a deboosted task to the head of the RT prio queue sched: Implement head queueing for sched_rt sched: Extend enqueue_task to allow head queueing sched: Remove USER_SCHED sched: Fix the place where group powers are updated sched: Assume *balance is valid sched: Remove load_balance_newidle() sched: Unify load_balance{,_newidle}() sched: Add a lock break for PREEMPT=y sched: Remove from fwd decls sched: Remove rq_iterator from move_one_task ... Fix up trivial conflicts in kernel/sched.c
-
Linus Torvalds authored
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Fix race between ttwu() and task_rq_lock() sched: Fix SMT scheduler regression in find_busiest_queue() sched: Fix sched_mv_power_savings for !SMT kernel/sched.c: Suppress unused var warning
-
Linus Torvalds authored
Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (172 commits) perf_event, amd: Fix spinlock initialization perf_event: Fix preempt warning in perf_clock() perf tools: Flush maps on COMM events perf_events, x86: Split PMU definitions into separate files perf annotate: Handle samples not at objdump output addr boundaries perf_events, x86: Remove superflous MSR writes perf_events: Simplify code by removing cpu argument to hw_perf_group_sched_in() perf_events, x86: AMD event scheduling perf_events: Add new start/stop PMU callbacks perf_events: Report the MMAP pgoff value in bytes perf annotate: Defer allocating sym_priv->hist array perf symbols: Improve debugging information about symtab origins perf top: Use a macro instead of a constant variable perf symbols: Check the right return variable perf/scripts: Tag syscall_name helper as not yet available perf/scripts: Add perf-trace-python Documentation perf/scripts: Remove unnecessary PyTuple resizes perf/scripts: Add syscall tracing scripts perf/scripts: Add Python scripting engine perf/scripts: Remove check-perf-trace from listed scripts ... Fix trivial conflict in tools/perf/util/probe-event.c
-
Linus Torvalds authored
Merge branch 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (28 commits) ftrace: Add function names to dangling } in function graph tracer tracing: Simplify memory recycle of trace_define_field tracing: Remove unnecessary variable in print_graph_return tracing: Fix typo of info text in trace_kprobe.c tracing: Fix typo in prof_sysexit_enable() tracing: Remove CONFIG_TRACE_POWER from kernel config tracing: Fix ftrace_event_call alignment for use with gcc 4.5 ftrace: Remove memory barriers from NMI code when not needed tracing/kprobes: Add short documentation for HAVE_REGS_AND_STACK_ACCESS_API s390: Add pt_regs register and stack access API tracing/kprobes: Make Kconfig dependencies generic tracing: Unify arch_syscall_addr() implementations tracing: Add notrace to TRACE_EVENT implementation functions ftrace: Allow to remove a single function from function graph filter tracing: Add correct/incorrect to sort keys for branch annotation output tracing: Simplify test for function_graph tracing start point tracing: Drop the tr check from the graph tracing path tracing: Add stack dump to trace_printk if stacktrace option is set tracing: Use appropriate perl constructs in recordmcount.pl tracing: optimize recordmcount.pl for offsets-handling ...
-