- 03 Apr, 2013 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Pull net into net-next to get the synchronize_net() bug fix in bonding. Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix VSOCK layer handling of context ID changes, from Reilly Grant. 2) Now that we have a synchronize_net() in netdev_rx_handler_unregister(), we can't let any call sites hold locks. Unfortunately bonding does, so we have to drop the rwlock there a little bit earlier, fix from Veaceslav Falico. 3) MAC address setting loop exits one iteration too early in mlx4 driver, from Yan Burman. 4) Restore ipv6 routes properly upon ifdown/ifup of loopback, from Balakumaran Kannan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: VSOCK: Handle changes to the VMCI context ID. net IPv6 : Fix broken IPv6 routing table after loopback down-up cbq: incorrect processing of high limits net/mlx4_en: Fix setting initial MAC address bonding: get netdev_rx_handler_unregister out of locks
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmapLinus Torvalds authored
Pull regmap fixes from Mark Brown: "A small collection of fixes. The most important ones are those from Stephen and Lars-Peter both of which fix cache issues that have been lurking for a while but not manifesting noticably enough for anyone to report them." * tag 'regmap-v3.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: async: Add missing return regmap: don't corrupt work buffer in _regmap_raw_write() regmap: cache Fix regcache-rbtree sync regmap: Initialize `map->debugfs' before regcache
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull DRM fixes from Dave Airlie: "Two core fixes, both regressions, along with some intel and some nouveau fixes for regressions and oopses" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: correctly restore mappings if drm_open fails drm/nouveau: fix NULL ptr dereference from nv50_disp_intr() drm/nouveau: fix handling empty channel list in ioctl's drm: don't unlock in the addfb error paths drm/i915: Fix build failure drm/i915: Be sure to turn hsync/vsync back on at crt enable (v2) drm/i915: duct-tape locking when eDP init fails
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "A collection of fixes pretty much across the MIPS code. Even the change to include/linux/signal.h by David Howells' 2a148698 ("Fix breakage in MIPS siginfo handling") should be considered MIPS-specific as it touches an ifdefed segment that is only relevant to MIPS and which unfortunately can't be made to go away entirely." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: Fix breakage in MIPS siginfo handling Revert "MIPS: BCM63XX: Call board_register_device from device_initcall()" MIPS: BCM63XX: Make nvram checksum failure non fatal MIPS: Fix code generation for non-DSP capable CPUs MIPS: Fix inconsistent formatting inside /proc/cpuinfo MIPS: SEAD3: Enable LL/SC. MIPS: Get rid of CONFIG_CPU_HAS_LLSC again MIPS: Add dependencies for HAVE_ARCH_TRANSPARENT_HUGEPAGE MIPS: VR4133: Fix probe for LL/SC. MIPS: Fix logic errors in bitops.c MIPS: Use CONFIG_CPU_MIPSR2 in csum_partial.S MIPS: compat: Return same error ENOSYS as native for invalid operation.
-
- 02 Apr, 2013 27 commits
-
-
Jacob Keller authored
Commit 7d4c04fc ("net: add option to enable error queue packets waking select") has an issue due to operator precedence causing the bit-wise OR to bind to the sock_flags call instead of the result of the terniary conditional. This fixes the *_poll functions to work properly. The old code results in "mask |= POLLPRI" instead of what was intended, which is to only include POLLPRI when the socket option is enabled. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ilija Hadzic authored
If first drm_open fails, the error-handling path will incorrectly restore inode's mapping to NULL. This can cause the crash later on. Fix by separately storing away mapping pointers that drm_open can touch and restore each from its own respective variable if the call fails. Fixes: https://bugzilla.novell.com/show_bug.cgi?id=807850 (thanks to Michal Hocko for investigating investigating and finding the root cause of the bug) Reference: http://lists.freedesktop.org/archives/dri-devel/2013-March/036564.html v2: Use one variable to store file and inode mapping since they are the same at the function entry. Fix spelling mistakes in commit message. v3: Add reference to the original bug report. Reported-by: Marco Munderloh <munderl@tnt.uni-hannover.de> Tested-by: Marco Munderloh <munderl@tnt.uni-hannover.de> Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
Merge branch 'drm-nouveau-fixes-3.9' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next Oops fixers. * 'drm-nouveau-fixes-3.9' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: fix NULL ptr dereference from nv50_disp_intr() drm/nouveau: fix handling empty channel list in ioctl's
-
Guenter Roeck authored
Since of_get_mac_address() is now declared even if CONFIG_OF_NET is not configured, the ifdef is no longer necessary and can be removed. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Guenter Roeck authored
Since of_get_mac_address() is now defined even if CONFIG_OF_NET is not configured, the ifdef around the code calling it is no longer necessary and can be removed. Similar, since of_get_phy_mode() is now defined as dummy function if OF_NET is not configured, it is no longer necessary to provide an OF dependent function as front-end. Also, the function depends on OF_NET, not on OF, so the conditional code was not correct anyway. Drop the front-end function and call of_get_phy_mode() directly. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Guenter Roeck authored
With of_get_mac_address() and of_get_phy_mode() now defined as dummy functions if OF_NET is not configured, it is no longer necessary to provide OF dependent functions as front-end. Also, the two functions depend on OF_NET, not on OF, so the conditional code was not correct anyway. Drop the front-end functions and call of_get_mac_address() and of_get_phy_mode() directly instead. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Guenter Roeck authored
With of_get_mac_address() and of_get_phy_mode() now defined as dummy functions if OF_NET is not configured, it is no longer necessary to provide OF dependent functions as front-end. Also, the two functions depend on OF_NET, not on OF, so the conditional code was not correct anyway. Drop the front-end functions and call of_get_mac_address() and of_get_phy_mode() directly instead. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Guenter Roeck authored
of_get_mac_address() and of_get_phy_mode() are only provided if OF_NET is configured. While most callers check for the define, not all do, and those who do require #ifdef around the code. For those who don't, the missing check can result in errors such as arch/powerpc/sysdev/tsi108_dev.c:107:3: error: implicit declaration of function 'of_get_mac_address' [-Werror=implicit-function-declaration] arch/powerpc/sysdev/mv64x60_dev.c:253:2: error: implicit declaration of function 'of_get_mac_address' [-Werror=implicit-function-declaration] Provide empty functions if OF_NET is not configured. This is safe because all callers do check the return values. Cc: David Daney <david.daney@cavium.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://people.freedesktop.org/~danvet/drm-intelDave Airlie authored
One locking regression fix, and a couple of other i915 ones. * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm: don't unlock in the addfb error paths drm/i915: Fix build failure drm/i915: Be sure to turn hsync/vsync back on at crt enable (v2) drm/i915: duct-tape locking when eDP init fails
-
Reilly Grant authored
The VMCI context ID of a virtual machine may change at any time. There is a VMCI event which signals this but datagrams may be processed before this is handled. It is therefore necessary to be flexible about the destination context ID of any datagrams received. (It can be assumed to be correct because it is provided by the hypervisor.) The context ID on existing sockets should be updated to reflect how the hypervisor is currently referring to the system. Signed-off-by: Reilly Grant <grantr@vmware.com> Acked-by: Andy King <acking@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Balakumaran Kannan authored
IPv6 Routing table becomes broken once we do ifdown, ifup of the loopback(lo) interface. After down-up, routes of other interface's IPv6 addresses through 'lo' are lost. IPv6 addresses assigned to all interfaces are routed through 'lo' for internal communication. Once 'lo' is down, those routing entries are removed from routing table. But those removed entries are not being re-created properly when 'lo' is brought up. So IPv6 addresses of other interfaces becomes unreachable from the same machine. Also this breaks communication with other machines because of NDISC packet processing failure. This patch fixes this issue by reading all interface's IPv6 addresses and adding them to IPv6 routing table while bringing up 'lo'. ==Testing== Before applying the patch: $ route -A inet6 Kernel IPv6 routing table Destination Next Hop Flag Met Ref Use If 2000::20/128 :: U 256 0 0 eth0 fe80::/64 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo ::1/128 :: Un 0 1 0 lo 2000::20/128 :: Un 0 1 0 lo fe80::xxxx:xxxx:xxxx:xxxx/128 :: Un 0 1 0 lo ff00::/8 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo $ sudo ifdown lo $ sudo ifup lo $ route -A inet6 Kernel IPv6 routing table Destination Next Hop Flag Met Ref Use If 2000::20/128 :: U 256 0 0 eth0 fe80::/64 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo ::1/128 :: Un 0 1 0 lo ff00::/8 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo $ After applying the patch: $ route -A inet6 Kernel IPv6 routing table Destination Next Hop Flag Met Ref Use If 2000::20/128 :: U 256 0 0 eth0 fe80::/64 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo ::1/128 :: Un 0 1 0 lo 2000::20/128 :: Un 0 1 0 lo fe80::xxxx:xxxx:xxxx:xxxx/128 :: Un 0 1 0 lo ff00::/8 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo $ sudo ifdown lo $ sudo ifup lo $ route -A inet6 Kernel IPv6 routing table Destination Next Hop Flag Met Ref Use If 2000::20/128 :: U 256 0 0 eth0 fe80::/64 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo ::1/128 :: Un 0 1 0 lo 2000::20/128 :: Un 0 1 0 lo fe80::xxxx:xxxx:xxxx:xxxx/128 :: Un 0 1 0 lo ff00::/8 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo $ Signed-off-by: Balakumaran Kannan <Balakumaran.Kannan@ap.sony.com> Signed-off-by: Maruthi Thotad <Maruthi.Thotad@ap.sony.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paul Gortmaker authored
Commit 3fb72f1e ("ipconfig wait for carrier") added a "wait for carrier on at least one interface" policy, with a worst case maximum wait of two minutes. However, if you encounter this, you won't get any feedback from the console as to the nature of what is going on. You just see the booting process hang for two minutes and then continue. Here we add a message so the user knows what is going on, and hence can take action to rectify the situation (e.g. fix network cable or whatever.) After the 1st 10s pause, output now begins that looks like this: Waiting up to 110 more seconds for network. Waiting up to 100 more seconds for network. Waiting up to 90 more seconds for network. Waiting up to 80 more seconds for network. ... Since most systems will have no problem getting link/carrier in the 1st 10s, the only people who will see these messages are people with genuine issues that need to be resolved. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neil Horman authored
This backtrace was recently reported on a 3.9 kernel: Actual results: from syslog /var/log/messsages: kernel: [17539.340285] ------------[ cut here ]------------ kernel: [17539.341012] WARNING: at lib/dma-debug.c:937 check_unmap+0x493/0x960() kernel: [17539.341012] Hardware name: MS-7125 kernel: [17539.341012] forcedeth 0000:00:0a.0: DMA-API: device driver failed to check map error[device address=0x0000000013c88000] [size=544 bytes] [mapped as page] kernel: [17539.341012] Modules linked in: fuse ebtable_nat ipt_MASQUERADE nf_conntrack_netbios_ns nf_conntrack_broadcast ip6table_nat nf_nat_ipv6 ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack bnep bluetooth rfkill ebtable_filter ebtables ip6table_filter ip6_tables snd_hda_codec_hdmi snd_cmipci snd_mpu401_uart snd_hda_intel snd_intel8x0 snd_opl3_lib snd_ac97_codec gameport snd_hda_codec snd_rawmidi ac97_bus snd_hwdep snd_seq snd_seq_device snd_pcm snd_page_alloc snd_timer snd k8temp soundcore serio_raw i2c_nforce2 forcedeth ata_generic pata_acpi nouveau video mxm_wmi wmi i2c_algo_bit drm_kms_helper ttm drm i2c_core sata_sil pata_amd sata_nv uinput kernel: [17539.341012] Pid: 17340, comm: sshd Not tainted 3.9.0-0.rc4.git0.1.fc19.i686.PAE #1 kernel: [17539.341012] Call Trace: kernel: [17539.341012] [<c045573c>] warn_slowpath_common+0x6c/0xa0 kernel: [17539.341012] [<c0701953>] ? check_unmap+0x493/0x960 kernel: [17539.341012] [<c0701953>] ? check_unmap+0x493/0x960 kernel: [17539.341012] [<c04557a3>] warn_slowpath_fmt+0x33/0x40 kernel: [17539.341012] [<c0701953>] check_unmap+0x493/0x960 kernel: [17539.341012] [<c049238f>] ? sched_clock_cpu+0xdf/0x150 kernel: [17539.341012] [<c0701e87>] debug_dma_unmap_page+0x67/0x70 kernel: [17539.341012] [<f7eae8f2>] nv_unmap_txskb.isra.32+0x92/0x100 Its pretty plainly the result of an skb fragment getting unmapped without having its initial mapping operation checked for errors. This patch corrects that. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Chen Gang authored
delete useless 'break' after 'return'. let 'return 0' instead of 'return (0)' also give a comment for 'break' to let readers notice it. Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vasily Averin authored
currently cbq works incorrectly for limits > 10% real link bandwidth, and practically does not work for limits > 50% real link bandwidth. Below are results of experiments taken on 1 Gbit link In shaper | Actual Result -----------+--------------- 100M | 108 Mbps 200M | 244 Mbps 300M | 412 Mbps 500M | 893 Mbps This happen because of q->now changes incorrectly in cbq_dequeue(): when it is called before real end of packet transmitting, L2T is greater than real time delay, q_now gets an extra boost but never compensate it. To fix this problem we prevent change of q->now until its synchronization with real time. Signed-off-by: Vasily Averin <vvs@openvz.org> Reviewed-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rajesh Borundia authored
Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rajesh Borundia authored
warning: 'pf_info.max_tx_ques' may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rajesh Borundia authored
o Fix for smatch tool reported error drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c:2029 qlcnic_probe() error: potential NULL dereference 'adapter'. o While returning from an error path in probe, adapter is not initialized. So do not access adapter in cleanup path. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rajesh Borundia authored
[net-next:master 301/302] drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c:563 qlcnic_set_multi() error: potential null dereference 'cur'. (kzalloc returns null) o Break out of the loop after memory allocation failure. Program all the MAC addresses that were cached in the return path. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Neal Cardwell authored
Remove a declaration left over from the TCPCT-ectomy. This sysctl is no longer referenced anywhere since 1a2c6181 ("tcp: Remove TCPCT"). Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stanislav Kinsbursky authored
Make sure that msg pointer is set back to error value in case of MSG_COPY flag is set and desired message to copy wasn't found. This garantees that msg is either a error pointer or a copy address. Otherwise the last message in queue will be freed without unlinking from the queue (which leads to memory corruption) and the dummy allocated copy won't be released. Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Eric Dumazet authored
commit 00cfec37 (net: add a synchronize_net() in netdev_rx_handler_unregister()) allows us to remove the synchronized_net() call from del_nbp() Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yan Burman authored
Commit 6bbb6d99 "net/mlx4_en: Optimize Rx fast path filter checks" introduced a regression under which the MAC address read from the card was not converted correctly (the most significant byte was not handled), fix that. Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Yan Burman <yanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Veaceslav Falico authored
Now that netdev_rx_handler_unregister contains synchronize_net(), we need to call it outside of bond->lock, cause it might sleep. Also, remove the already unneded synchronize_net(). Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC bug fixes from Arnd Bergmann: "After a quiet set of fixes for 3.9-rc4, a lot of people woke up and sent urgent fixes for 3.9. I pushed back on a number of them that got deferred to 3.10, but these are the ones that seemed important. Regression in 3.9: - Multiple regressions in OMAP2+ clock cleanup - SH-Mobile frame buffer bug fix that merged here because of maintainer MIA - ux500 prcmu changes broke DT booting - MMCI duplicated regulator setup on ux500 - New ux500 clock driver broke ethernet on snowball - Local interrupt driver for mvebu broke ethernet - MVEBU GPIO driver did not get set up right on Orion DT - incorrect interrupt number on Orion crypto for DT Long-standing bugs, including candidates for stable: - Kirkwood MMC needs to disable invalid card detect pins - MV SDIO pinmux was wrong on Mirabox - GoFlex Net board file needs to set NAND chip delay - MSM timer restart race - ep93xx early debug code broke in 3.7 - i.MX CPU hotplug race - Incorrect clock setup for OMAP1 USB - Workaround for bad clock setup by some old OMAP4 boot loaders - Static I/O mappings on cns3xxx since 3.2" * tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: cns3xxx: fix mapping of private memory region arm: mvebu: Fix pinctrl for Armada 370 Mirabox SDIO port. arm: orion5x: correct IRQ used in dtsi for mv_cesa arm: orion5x: fix orion5x.dtsi gpio parameters ARM: Kirkwood: fix unused mvsdio gpio pins arm: mvebu: Use local interrupt only for the timer 0 ARM: kirkwood: Fix chip-delay for GoFlex Net ARM: ux500: Enable the clock controlling Ethernet on Snowball ARM: ux500: Stop passing ios_handler() as an MMCI power controlling call-back ARM: ux500: Apply the TCPM and TCDM locations and sizes to dbx5x0 DT fbdev: sh_mobile_lcdc: fixup B side hsync adjust settings ARM: OMAP: clocks: Delay clk inits atleast until slab is initialized ARM: imx: fix sync issue between imx_cpu_die and imx_cpu_kill ARM: msm: Stop counting before reprogramming clockevent ARM: ep93xx: Fix wait for UART FIFO to be empty ARM: OMAP4: PM: fix PM regression introduced by recent clock cleanup ARM: OMAP3: hwmod data: keep MIDLEMODE in force-standby for musb ARM: OMAP4: clock data: lock USB DPLL on boot ARM: OMAP1: fix USB host on 1710
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd bugfix from J Bruce Fields: "An xdr decoding error--thanks, Toralf Förster, and Trinity!" * 'for-3.9' of git://linux-nfs.org/~bfields/linux: nfsd4: reject "negative" acl lengths
-
git://git.infradead.org/users/cbou/linux-cns3xxxArnd Bergmann authored
From Anton Vorontsov <anton@enomsg.org>: This tag includes Mac Lin's work to revive CNS3xxx booting: "Since commit 0536bdf3 (ARM: move iotable mappings within the vmalloc region), [...] the pre-defined iotable mappings is not in the vmalloc region. [...] move the iotable mappings into the vmalloc region, and merge the MPCore private memory region (containing the SCU, the GIC and the TWD) as a single region." Plus there is a small cosmetic fix, also from Mac Lin. * tag 'v3.9-rc1_cns3xxx_fixes' of git://git.infradead.org/users/cbou/linux-cns3xxx: ARM: cns3xxx: fix mapping of private memory region [arnd: dropped the cosmetic fix from the merge as it is not needed for 3.9] Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
- 01 Apr, 2013 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linuxLinus Torvalds authored
Pull virtio fixes from Rusty Russell: "One reversion, a tiny leak fix, and a cc:stable locking fix, in two parts" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio: console: add locking around c_ovq operations virtio: console: rename cvq_lock to c_ivq_lock hw_random: free rng_buffer at module exit Revert "virtio_console: Initialize guest_connected=true for rproc_serial"
-
Anatol Pomozov authored
struct block_device lifecycle is defined by its inode (see fs/block_dev.c) - block_device allocated first time we access /dev/loopXX and deallocated on bdev_destroy_inode. When we create the device "losetup /dev/loopXX afile" we want that block_device stay alive until we destroy the loop device with "losetup -d". But because we do not hold /dev/loopXX inode its counter goes 0, and inode/bdev can be destroyed at any moment. Usually it happens at memory pressure or when user drops inode cache (like in the test below). When later in loop_clr_fd() we want to use bdev we have use-after-free error with following stack: BUG: unable to handle kernel NULL pointer dereference at 0000000000000280 bd_set_size+0x10/0xa0 loop_clr_fd+0x1f8/0x420 [loop] lo_ioctl+0x200/0x7e0 [loop] lo_compat_ioctl+0x47/0xe0 [loop] compat_blkdev_ioctl+0x341/0x1290 do_filp_open+0x42/0xa0 compat_sys_ioctl+0xc1/0xf20 do_sys_open+0x16e/0x1d0 sysenter_dispatch+0x7/0x1a To prevent use-after-free we need to grab the device in loop_set_fd() and put it later in loop_clr_fd(). The issue is reprodusible on current Linus head and v3.3. Here is the test: dd if=/dev/zero of=loop.file bs=1M count=1 while [ true ]; do losetup /dev/loop0 loop.file echo 2 > /proc/sys/vm/drop_caches losetup -d /dev/loop0 done [ Doing bdgrab/bput in loop_set_fd/loop_clr_fd is safe, because every time we call loop_set_fd() we check that loop_device->lo_state is Lo_unbound and set it to Lo_bound If somebody will try to set_fd again it will get EBUSY. And if we try to loop_clr_fd() on unbound loop device we'll get ENXIO. loop_set_fd/loop_clr_fd (and any other loop ioctl) is called under loop_device->lo_ctl_mutex. ] Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.linaro.org/people/mturquette/linuxLinus Torvalds authored
Pull tegra clock driver fix from Mike Turquette: "Missing base address in Tegra clock driver results in non-operational PCIe. On some devices this means that Ethernet will go uninitialized and other devices will fail. This pull request fixes it with a single patch to pass the proper base address in the Tegra clock driver." * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux: clk: tegra: Allow PLLE training to succeed
-
git://git.kernel.org/pub/scm/linux/kernel/git/rwlove/fcoeLinus Torvalds authored
Pull FCoE fixes from Robert Love: "Critical patches to fix FCoE VN2VN mode with new interfaces targeting 3.9-rc" * tag 'for-3.9-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rwlove/fcoe: libfcoe: Fix fcoe_sysfs VN2VN mode libfc, fcoe, bnx2fc: Split fc_disc_init into fc_disc_{init, config} libfc, fcoe, bnx2fc: Always use fcoe_disc_init for discovery layer initialization fcoe: Fix deadlock between create and destroy paths bnx2fc: Make the fcoe_cltr the SCSI host parent
-
Thierry Reding authored
Under some circumstances the PLLE needs to be retrained, in which case access to the PMC registers is required. Fix this by passing a pointer to the PMC registers instead of NULL when registering the PLLE clock. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: net/mac80211/sta_info.c net/wireless/core.h Two minor conflicts in wireless. Overlapping additions of extern declarations in net/wireless/core.h and a bug fix overlapping with the addition of a boolean parameter to __ieee80211_key_free(). Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds authored
Pull arch/tile fix from Chris Metcalf: "This change allows newer Tilera boot tools to work correctly with current (and stable) kernels by using the right filename to get the initramfs from the Tilera hypervisor filesystem." * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: expect new initramfs name from hypervisor file system
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) sadb_msg prepared for IPSEC userspace forgets to initialize the satype field, fix from Nicolas Dichtel. 2) Fix mac80211 synchronization during station removal, from Johannes Berg. 3) Fix IPSEC sequence number notifications when they wrap, from Steffen Klassert. 4) Fix cfg80211 wdev tracing crashes when add_virtual_intf() returns an error pointer, from Johannes Berg. 5) In mac80211, don't call into the channel context code with the interface list mutex held. From Johannes Berg. 6) In mac80211, if we don't actually associate, do not restart the STA timer, otherwise we can crash. From Ben Greear. 7) Missing dma_mapping_error() check in e1000, ixgb, and e1000e. From Christoph Paasch. 8) Fix sja1000 driver defines to not conflict with SH port, from Marc Kleine-Budde. 9) Don't call il4965_rs_use_green with a NULL station, from Colin Ian King. 10) Suspend/Resume in the FEC driver fail because the buffer descriptors are not initialized at all the moments in which they should. Fix from Frank Li. 11) cpsw and davinci_emac drivers both use the wrong interface to restart a stopped TX queue. Use netif_wake_queue not netif_start_queue, the latter is for initialization/bringup not active management of the queue. From Mugunthan V N. 12) Fix regression in rate calculations done by psched_ratecfg_precompute(), missing u64 type promotion. From Sergey Popovich. 13) Fix length overflow in tg3 VPD parsing, from Kees Cook. 14) AOE driver fails to allocate enough headroom, resulting in crashes. Fix from Eric Dumazet. 15) RX overflow happens too quickly in sky2 driver because pause packet thresholds are not programmed correctly. From Mirko Lindner. 16) Bonding driver manages arp_interval and miimon settings incorrectly, disabling one unintentionally disables both. Fix from Nikolay Aleksandrov. 17) smsc75xx drivers don't program the RX mac properly for jumbo frames. Fix from Steve Glendinning. 18) Fix off-by-one in Codel packet scheduler. From Vijay Subramanian. 19) Fix packet corruption in atl1c by disabling MSI support, from Hannes Frederic Sowa. 20) netdev_rx_handler_unregister() needs a synchronize_net() to fix crashes in bonding driver unload stress tests. From Eric Dumazet. 21) rxlen field of ks8851 RX packet descriptors not interpreted correctly (it is 12 bits not 16 bits, so needs to be masked after shifting the 32-bit value down 16 bits). Fix from Max Nekludov. 22) Fix missed RX/TX enable in sh_eth driver due to mishandling of link change indications. From Sergei Shtylyov. 23) Fix crashes during spurious ECI interrupts in sh_eth driver, also from Sergei Shtylyov. 24) dm9000 driver initialization is done wrong for revision B devices with DSP PHY, from Joseph CHANG. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (53 commits) DM9000B: driver initialization upgrade sh_eth: make 'link' field of 'struct sh_eth_private' *int* sh_eth: workaround for spurious ECI interrupt sh_eth: fix handling of no LINK signal ks8851: Fix interpretation of rxlen field. net: add a synchronize_net() in netdev_rx_handler_unregister() MAINTAINERS: Update netxen_nic maintainers list atl1e: drop pci-msi support because of packet corruption net: fq_codel: Fix off-by-one error net: calxedaxgmac: Wake-on-LAN fixes net: calxedaxgmac: fix rx ring handling when OOM net: core: Remove redundant call to 'nf_reset' in 'dev_forward_skb' smsc75xx: fix jumbo frame support net: fix the use of this_cpu_ptr bonding: fix disabling of arp_interval and miimon ipv6: don't accept node local multicast traffic from the wire sky2: Threshold for Pause Packet is set wrong sky2: Receive Overflows not counted aoe: reserve enough headroom on skbs line up comment for ndo_bridge_getlink ...
-