- 31 Jan, 2019 27 commits
-
-
Kangjie Lu authored
commit 44fabd8c upstream. snd_pcm_lib_malloc_pages() may fail, so let's check its status and return its error code upstream. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yan, Zheng authored
commit d95e674c upstream. snap realm and corresponding inode have pointers to each other. The two pointer should get clear at the same time. Otherwise, snap realm's pointer may reference freed inode. Cc: stable@vger.kernel.org # 4.17+ Signed-off-by:
"Yan, Zheng" <zyan@redhat.com> Reviewed-by:
Luis Henriques <lhenriques@suse.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Charles Yeh authored
commit 4dcf9ddc upstream. Add new PID to support PL2303TB (TYPE_HX) Signed-off-by:
Charles Yeh <charlesyeh522@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Max Schulze authored
commit b81c2c33 upstream. Add new Motorola Tetra device id for Motorola Solutions TETRA PEI device T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0cad ProdID=9016 Rev=24.16 S: Manufacturer=Motorola Solutions, Inc. S: Product=TETRA PEI interface C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=usb_serial_simple I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=usb_serial_simple Signed-off-by:
Max Schulze <max.schulze@posteo.de> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Christian Lamparter authored
commit 91f7d2e8 upstream. The patch "usb: simplify usbport trigger" together with "leds: triggers: add device attribute support" caused an regression for the usbport trigger. it will no longer enumerate any active usb hub ports under the "ports" directory in the sysfs class directory, if the usb host drivers are fully initialized before the usbport trigger was loaded. The reason is that the usbport driver tries to register the sysfs entries during the activate() callback. And this will fail with -2 / ENOENT because the patch "leds: triggers: add device attribute support" made it so that the sysfs "ports" group was only being added after the activate() callback succeeded. This version of the patch reverts parts of the "usb: simplify usbport trigger" patch and restores usbport trigger's functionality. Fixes: 6f7b0bad ("usb: simplify usbport trigger") Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by:
-
Tomas Winkler authored
commit f7ee8ead upstream. Add the Denverton innovation engine (IE) device ids. The IE is an ME-like device which provides HW security offloading. Cc: <stable@vger.kernel.org> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
-
Alexander Usyskin authored
commit 173436ba upstream. The LBG server platform sports DMA support. Cc: <stable@vger.kernel.org> #v5.0+ Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 13d7f463 ] TCP transmission with MSG_ZEROCOPY fails if the peer closes its end of the connection and so transitions this socket to CLOSE_WAIT state. Transmission in close wait state is acceptable. Other similar tests in the stack (e.g., in FastOpen) accept both states. Relax this test, too. Link: https://www.mail-archive.com/netdev@vger.kernel.org/msg276886.html Link: https://www.mail-archive.com/netdev@vger.kernel.org/msg227390.html Fixes: f214f915 ("tcp: enable MSG_ZEROCOPY") Reported-by:
Marek Majkowski <marek@cloudflare.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> CC: Yuchung Cheng <ycheng@google.com> CC: Neal Cardwell <ncardwell@google.com> CC: Soheil Hassas Yeganeh <soheil@google.com> CC: Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit 80b3671e ] We forgot to update ip6erspan version related info when changing link, which will cause setting new hwid failed. Reported-by:
Jianlin Shi <jishi@redhat.com> Fixes: 94d7d8f2 ("ip6_gre: add erspan v2 support") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Andrew Lunn authored
[ Upstream commit e0a7328f ] m88e1318_set_wol() takes the lock as part of phy_select_page(). Don't take the lock again with phy_read(), use the unlocked __phy_read(). Fixes: 424ca4c5 ("net: phy: marvell: fix paged access races") Reported-by:
Åke Rehnman <ake.rehnman@gmail.com> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Xin Long authored
[ Upstream commit 20704bd1 ] As said in draft-foschiano-erspan-03#section4: Different frame variants known as "ERSPAN Types" can be distinguished based on the GRE "Protocol Type" field value: Type I and II's value is 0x88BE while Type III's is 0x22EB [ETYPES]. So set it properly in erspan_xmit() according to erspan_ver. While at it, also remove the unused parameter 'proto' in erspan_fb_xmit(). Fixes: 94d7d8f2 ("ip6_gre: add erspan v2 support") Reported-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Olivier Matz authored
[ Upstream commit ab5098fa ] In changelink ops, the ip6gre_net pointer is retrieved from dev_net(dev), which is wrong in case of x-netns. Thus, the tunnel is not unlinked from its current list and is relinked into another net namespace. This corrupts the tunnel lists and can later trigger a kernel oops. Fix this by retrieving the netns from device private area. Fixes: c8632fc3 ("net: ip6_gre: Split up ip6gre_changelink()") Cc: Petr Machata <petrm@mellanox.com> Signed-off-by:
Olivier Matz <olivier.matz@6wind.com> Acked-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 0f149c9f ] Failure __ip_append_data triggers udp_flush_pending_frames, but these tests happen later. The skb must be freed directly. Fixes: bec1f6f6 ("udp: generate gso with UDP_SEGMENT") Reported-by:
-
Ivan Vecera authored
[ Upstream commit 2cddd201 ] Recent changes (especially 05cd271f ("cls_flower: Support multiple masks per priority")) in the fl_flow_mask structure grow it and its current size e.g. on x86_64 with defconfig is 760 bytes and more than 1024 bytes with some debug options enabled. Prior the mentioned commit its size was 176 bytes (using defconfig on x86_64). With regard to this fact it's reasonable to allocate this structure dynamically in fl_change() to reduce its stack size. v2: - use kzalloc() instead of kcalloc() Fixes: 05cd271f ("cls_flower: Support multiple masks per priority") Cc: Jiri Pirko <jiri@resnulli.us> Cc: Paul Blakey <paulb@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
-
Ido Schimmel authored
When a packet should be trapped to the CPU the device consumes a WQE (work queue element) from an RDQ (receive descriptor queue) and copies the packet to the address specified in the WQE. The device then tries to post a CQE (completion queue element) that contains various metadata (e.g., ingress port) about the packet to a CQ (completion queue). In case the device managed to consume a WQE, but did not manage to post the corresponding CQE, it will get stuck. This unlikely situation can be triggered due to the scheme the driver is currently using to process CQEs. The driver will consume up to 512 CQEs at a time and after processing each corresponding WQE it will ring the RDQ's doorbell, letting the device know that a new WQE was posted for it to consume. Only after processing all the CQEs (up to 512), the driver will ring the CQ's doorbell, letting the device know that new ones can be posted. Fix this by having the driver ring the CQ's doorbell for every processed CQE, but before ringing the RDQ's doorbell. This guarantees that whenever we post a new WQE, there is a corresponding CQE available. Copy the currently processed CQE to prevent the device from overwriting it with a new CQE after ringing the doorbell. Note that the driver still arms the CQ only after processing all the pending CQEs, so that interrupts for this CQ will only be delivered after the driver finished its processing. Before commit 8404f6f2 ("mlxsw: pci: Allow to use CQEs of version 1 and version 2") the issue was virtually impossible to trigger since the number of CQEs was twice the number of WQEs and the number of CQEs processed at a time was equal to the number of available WQEs. Fixes: 8404f6f2 ("mlxsw: pci: Allow to use CQEs of version 1 and version 2") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reported-by:
Semion Lisyansky <semionl@mellanox.com> Tested-by:
-
Nir Dotan authored
[ Upstream commit a11dcd64 ] When using a tc flower action of egress mirred redirect, the driver adds an implicit FID setting action. This implicit action sets a dummy FID to the packet and is used as part of a design for trapping unmatched flows in OVS. While this implicit FID setting action is supposed to be a NOP when a redirect action is added, in Spectrum-2 the FID record is consulted as the dummy FID index is an 802.1D FID index and the packet is dropped instead of being redirected. Set the dummy FID index value to be within 802.1Q range. This satisfies both Spectrum-1 which ignores the FID and Spectrum-2 which identifies it as an 802.1Q FID and will then follow the redirect action. Fixes: c3ab4354 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC") Signed-off-by:
Nir Dotan <nird@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit f97f4dd8 ] IPv4 routing tables are flushed in two cases: 1. In response to events in the netdev and inetaddr notification chains 2. When a network namespace is being dismantled In both cases only routes associated with a dead nexthop group are flushed. However, a nexthop group will only be marked as dead in case it is populated with actual nexthops using a nexthop device. This is not the case when the route in question is an error route (e.g., 'blackhole', 'unreachable'). Therefore, when a network namespace is being dismantled such routes are not flushed and leaked [1]. To reproduce: # ip netns add blue # ip -n blue route add unreachable 192.0.2.0/24 # ip netns del blue Fix this by not skipping error routes that are not marked with RTNH_F_DEAD when flushing the routing tables. To prevent the flushing of such routes in case #1, add a parameter to fib_table_flush() that indicates if the table is flushed as part of namespace dismantle or not. Note that this problem does not exist in IPv6 since error routes are associated with the loopback device. [1] unreferenced object 0xffff888066650338 (size 56): comm "ip", pid 1206, jiffies 4294786063 (age 26.235s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 b0 1c 62 61 80 88 ff ff ..........ba.... e8 8b a1 64 80 88 ff ff 00 07 00 08 fe 00 00 00 ...d............ backtrace: [<00000000856ed27d>] inet_rtm_newroute+0x129/0x220 [<00000000fcdfc00a>] rtnetlink_rcv_msg+0x397/0xa20 [<00000000cb85801a>] netlink_rcv_skb+0x132/0x380 [<00000000ebc991d2>] netlink_unicast+0x4c0/0x690 [<0000000014f62875>] netlink_sendmsg+0x929/0xe10 [<00000000bac9d967>] sock_sendmsg+0xc8/0x110 [<00000000223e6485>] ___sys_sendmsg+0x77a/0x8f0 [<000000002e94f880>] __sys_sendmsg+0xf7/0x250 [<00000000ccb1fa72>] do_syscall_64+0x14d/0x610 [<00000000ffbe3dae>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<000000003a8b605b>] 0xffffffffffffffff unreferenced object 0xffff888061621c88 (size 48): comm "ip", pid 1206, jiffies 4294786063 (age 26.235s) hex dump (first 32 bytes): 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk 6b 6b 6b 6b 6b 6b 6b 6b d8 8e 26 5f 80 88 ff ff kkkkkkkk..&_.... backtrace: [<00000000733609e3>] fib_table_insert+0x978/0x1500 [<00000000856ed27d>] inet_rtm_newroute+0x129/0x220 [<00000000fcdfc00a>] rtnetlink_rcv_msg+0x397/0xa20 [<00000000cb85801a>] netlink_rcv_skb+0x132/0x380 [<00000000ebc991d2>] netlink_unicast+0x4c0/0x690 [<0000000014f62875>] netlink_sendmsg+0x929/0xe10 [<00000000bac9d967>] sock_sendmsg+0xc8/0x110 [<00000000223e6485>] ___sys_sendmsg+0x77a/0x8f0 [<000000002e94f880>] __sys_sendmsg+0xf7/0x250 [<00000000ccb1fa72>] do_syscall_64+0x14d/0x610 [<00000000ffbe3dae>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<000000003a8b605b>] 0xffffffffffffffff Fixes: 8cced9ef ("[NETNS]: Enable routing configuration in non-initial namespace.") Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Nir Dotan authored
[ Upstream commit d2f372ba ] Spectrum-2 PHY layer introduces a calibration period which is a part of the Spectrum-2 firmware boot process. Hence increase the SW timeout waiting for the firmware to come out of boot. This does not increase system boot time in cases where the firmware PHY calibration process is done quickly. Fixes: c3ab4354 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC") Signed-off-by:
-
Jason Wang authored
[ Upstream commit cc5e7107 ] Vhost dirty page logging API is designed to sync through GPA. But we try to log GIOVA when device IOTLB is enabled. This is wrong and may lead to missing data after migration. To solve this issue, when logging with device IOTLB enabled, we will: 1) reuse the device IOTLB translation result of GIOVA->HVA mapping to get HVA, for writable descriptor, get HVA through iovec. For used ring update, translate its GIOVA to HVA 2) traverse the GPA->HVA mapping to get the possible GPA and log through GPA. Pay attention this reverse mapping is not guaranteed to be unique, so we should log each possible GPA in this case. This fix the failure of scp to guest during migration. In -next, we will probably support passing GIOVA->GPA instead of GIOVA->HVA. Fixes: 6b1e6cc7 ("vhost: new device IOTLB API") Reported-by:
Jintack Lim <jintack@cs.columbia.edu> Cc: Jintack Lim <jintack@cs.columbia.edu> Signed-off-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Ross Lagerwall authored
[ Upstream commit 04a4af33 ] For nested and variable attributes, the expected length of an attribute is not known and marked by a negative number. This results in an OOB read when the expected length is later used to check if the attribute is all zeros. Fix this by using the actual length of the attribute rather than the expected length. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Cong Wang authored
[ Upstream commit cd0c4e70 ] Martin reported a set of filters don't work after changing from reclassify to continue. Looking into the code, it looks like skb protocol is not always fetched for each iteration of the filters. But, as demonstrated by Martin, TC actions could modify skb->protocol, for example act_vlan, this means we have to refetch skb protocol in each iteration, rather than using the one we fetch in the beginning of the loop. This bug is _not_ introduced by commit 3b3ae880 ("net: sched: consolidate tc_classify{,_compat}"), technically, if act_vlan is the only action that modifies skb protocol, then it is commit c7e2b968 ("sched: introduce vlan action") which introduced this bug. Reported-by:
Martin Olsson <martin.olsson+netdev@sentorsecurity.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Davide Caratti authored
[ Upstream commit 9174c3df ] running the following TDC test cases: 7afc - Replace tunnel_key set action with all parameters 364d - Replace tunnel_key set action with all parameters and cookie it's possible to trigger kmemleak warnings like: unreferenced object 0xffff94797127ab40 (size 192): comm "tc", pid 3248, jiffies 4300565293 (age 1006.862s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 c0 93 f9 8a ff ff ff ff ................ 41 84 ee 89 ff ff ff ff 00 00 00 00 00 00 00 00 A............... backtrace: [<000000001e85b61c>] tunnel_key_init+0x31d/0x820 [act_tunnel_key] [<000000007f3f6ee7>] tcf_action_init_1+0x384/0x4c0 [<00000000e89e3ded>] tcf_action_init+0x12b/0x1a0 [<00000000c1c8c0f8>] tcf_action_add+0x73/0x170 [<0000000095a9fc28>] tc_ctl_action+0x122/0x160 [<000000004bebeac5>] rtnetlink_rcv_msg+0x263/0x2d0 [<000000009fd862dd>] netlink_rcv_skb+0x4a/0x110 [<00000000b55199e7>] netlink_unicast+0x1a0/0x250 [<000000004996cd21>] netlink_sendmsg+0x2c1/0x3c0 [<000000004d6a94b4>] sock_sendmsg+0x36/0x40 [<000000005d9f0208>] ___sys_sendmsg+0x280/0x2f0 [<00000000dec19023>] __sys_sendmsg+0x5e/0xa0 [<000000004b82ac81>] do_syscall_64+0x5b/0x180 [<00000000a0f1209a>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [<000000002926b2ab>] 0xffffffffffffffff when the tunnel_key action is replaced, the kernel forgets to release the dst metadata: ensure they are released by tunnel_key_init(), the same way it's done in tunnel_key_release(). Fixes: d0f6dd8a ("net/sched: Introduce act_tunnel_key") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Acked-by:
-
Thomas Petazzoni authored
[ Upstream commit e40e2a2e ] The current code in __mdiobus_register() doesn't properly handle failures returned by the devm_gpiod_get_optional() call: it returns immediately, without unregistering the device that was added by the call to device_register() earlier in the function. This leaves a stale device, which then causes a NULL pointer dereference in the code that handles deferred probing: [ 1.489982] Unable to handle kernel NULL pointer dereference at virtual address 00000074 [ 1.498110] pgd = (ptrval) [ 1.500838] [00000074] *pgd=00000000 [ 1.504432] Internal error: Oops: 17 [#1] SMP ARM [ 1.509133] Modules linked in: [ 1.512192] CPU: 1 PID: 51 Comm: kworker/1:3 Not tainted 4.20.0-00039-g3b73a4cc8b3e-dirty #99 [ 1.520708] Hardware name: Xilinx Zynq Platform [ 1.525261] Workqueue: events deferred_probe_work_func [ 1.530403] PC is at klist_next+0x10/0xfc [ 1.534403] LR is at device_for_each_child+0x40/0x94 [ 1.539361] pc : [<c0683fbc>] lr : [<c0455d90>] psr: 200e0013 [ 1.545628] sp : ceeefe68 ip : 00000001 fp : ffffe000 [ 1.550863] r10: 00000000 r9 : c0c66790 r8 : 00000000 [ 1.556079] r7 : c0457d44 r6 : 00000000 r5 : ceeefe8c r4 : cfa2ec78 [ 1.562604] r3 : 00000064 r2 : c0457d44 r1 : ceeefe8c r0 : 00000064 [ 1.569129] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 1.576263] Control: 18c5387d Table: 0ed7804a DAC: 00000051 [ 1.582013] Process kworker/1:3 (pid: 51, stack limit = 0x(ptrval)) [ 1.588280] Stack: (0xceeefe68 to 0xceef0000) [ 1.592630] fe60: cfa2ec78 c0c03c08 00000000 c0457d44 00000000 c0c66790 [ 1.600814] fe80: 00000000 c0455d90 ceeefeac 00000064 00000000 0d7a542e cee9d494 cfa2ec78 [ 1.608998] fea0: cfa2ec78 00000000 c0457d44 c0457d7c cee9d494 c0c03c08 00000000 c0455dac [ 1.617182] fec0: cf98ba44 cf926a00 cee9d494 0d7a542e 00000000 cf935a10 cf935a10 cf935a10 [ 1.625366] fee0: c0c4e9b8 c0457d7c c0c4e80c 00000001 cf935a10 c0457df4 cf935a10 c0c4e99c [ 1.633550] ff00: c0c4e99c c045a27c c0c4e9c4 ced63f80 cfde8a80 cfdebc00 00000000 c013893c [ 1.641734] ff20: cfde8a80 cfde8a80 c07bd354 ced63f80 ced63f94 cfde8a80 00000008 c0c02d00 [ 1.649936] ff40: cfde8a98 cfde8a80 ffffe000 c0139a30 ffffe000 c0c6624a c07bd354 00000000 [ 1.658120] ff60: ffffe000 cee9e780 ceebfe00 00000000 ceeee000 ced63f80 c0139788 cf8cdea4 [ 1.666304] ff80: cee9e79c c013e598 00000001 ceebfe00 c013e44c 00000000 00000000 00000000 [ 1.674488] ffa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000 [ 1.682671] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.690855] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 1.699058] [<c0683fbc>] (klist_next) from [<c0455d90>] (device_for_each_child+0x40/0x94) [ 1.707241] [<c0455d90>] (device_for_each_child) from [<c0457d7c>] (device_reorder_to_tail+0x38/0x88) [ 1.716476] [<c0457d7c>] (device_reorder_to_tail) from [<c0455dac>] (device_for_each_child+0x5c/0x94) [ 1.725692] [<c0455dac>] (device_for_each_child) from [<c0457d7c>] (device_reorder_to_tail+0x38/0x88) [ 1.734927] [<c0457d7c>] (device_reorder_to_tail) from [<c0457df4>] (device_pm_move_to_tail+0x28/0x40) [ 1.744235] [<c0457df4>] (device_pm_move_to_tail) from [<c045a27c>] (deferred_probe_work_func+0x58/0x8c) [ 1.753746] [<c045a27c>] (deferred_probe_work_func) from [<c013893c>] (process_one_work+0x210/0x4fc) [ 1.762888] [<c013893c>] (process_one_work) from [<c0139a30>] (worker_thread+0x2a8/0x5c0) [ 1.771072] [<c0139a30>] (worker_thread) from [<c013e598>] (kthread+0x14c/0x154) [ 1.778482] [<c013e598>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) [ 1.785689] Exception stack(0xceeeffb0 to 0xceeefff8) [ 1.790739] ffa0: 00000000 00000000 00000000 00000000 [ 1.798923] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.807107] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 1.813724] Code: e92d47f0 e1a05000 e8900048 e1a00003 (e5937010) [ 1.819844] ---[ end trace 3c2c0c8b65399ec9 ]--- The actual error that we had from devm_gpiod_get_optional() was -EPROBE_DEFER, due to the GPIO being provided by a driver that is probed later than the Ethernet controller driver. To fix this, we simply add the missing device_del() invocation in the error path. Fixes: 69226896 ("mdio_bus: Issue GPIO RESET to PHYs") Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@bootlin.com> Reviewed-by:
-
Andrew Lunn authored
[ Upstream commit 8cbcdc1a ] The VOD can be out of spec, unless some magic value is poked into an undocumented register in an undocumented page. Fixes: e4cf8a38 ("net: phy: Marvell: Add mv88e6390 internal PHY") Signed-off-by:
-
Ross Lagerwall authored
[ Upstream commit 6c57f045 ] In certain cases, pskb_trim_rcsum() may change skb pointers. Reinitialize header pointers afterwards to avoid potential use-after-frees. Add a note in the documentation of pskb_trim_rcsum(). Found by KASAN. Signed-off-by:
-
Yunjian Wang authored
[ Upstream commit 28c1382f ] The skb header should be set to ethernet header before using is_skb_forwardable. Because the ethernet header length has been considered in is_skb_forwardable(including dev->hard_header_len length). To reproduce the issue: 1, add 2 ports on linux bridge br using following commands: $ brctl addbr br $ brctl addif br eth0 $ brctl addif br eth1 2, the MTU of eth0 and eth1 is 1500 3, send a packet(Data 1480, UDP 8, IP 20, Ethernet 14, VLAN 4) from eth0 to eth1 So the expect result is packet larger than 1500 cannot pass through eth0 and eth1. But currently, the packet passes through success, it means eth1's MTU limit doesn't take effect. Fixes: f6367b46 ("bridge: use is_skb_forwardable in forward path") Cc: bridge@lists.linux-foundation.org Cc: Nkolay Aleksandrov <nikolay@cumulusnetworks.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
Yunjian Wang <wangyunjian@huawei.com> Signed-off-by:
-
Lendacky, Thomas authored
[ Upstream commit 5ab3121b ] The XGBE hardware has support for performing MDIO operations using an MDIO command request. The driver mistakenly uses the mdio port address as the MDIO command request device address instead of the MDIO command request port address. Additionally, the driver does not properly check for and create a clause 45 MDIO command. Check the supplied MDIO register to determine if the request is a clause 45 operation (MII_ADDR_C45). For a clause 45 operation, extract the device address and register number from the supplied MDIO register and use them to set the MDIO command request device address and register number fields. For a clause 22 operation, the MDIO request device address is set to zero and the MDIO command request register number is set to the supplied MDIO register. In either case, the supplied MDIO port address is used as the MDIO command request port address. Fixes: 732f2ab7 ("amd-xgbe: Add support for MDIO attached PHYs") Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Tested-by:
Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by:
-
- 26 Jan, 2019 13 commits
-
-
Greg Kroah-Hartman authored
-
Corey Minyard authored
commit 913a89f0 upstream. The IPMI driver was recently modified to use SRCU, but it turns out this uses a chunk of percpu memory, even if IPMI is never used. So modify thing to on initialize on the first use. There was already code to sort of handle this for handling init races, so piggy back on top of that, and simplify it in the process. Signed-off-by:
Corey Minyard <cminyard@mvista.com> Reported-by:
Tejun Heo <tj@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: stable@vger.kernel.org # 4.18 Signed-off-by:
-
Corey Minyard authored
commit 7d6380cd upstream. The block number was not being compared right, it was off by one when checking the response. Some statistics wouldn't be incremented properly in some cases. Check to see if that middle-part messages always have 31 bytes of data. Signed-off-by:
-
Fred Klassen authored
commit 479d6b39 upstream. Some IPMI modules (e.g. ibmpex_msg_handler()) will have ipmi_usr_hdlr handlers that call ipmi_free_recv_msg() directly. This will essentially kfree(msg), leading to use-after-free. This does not happen in the ipmi_devintf module, which will queue the message and run ipmi_free_recv_msg() later. BUG: KASAN: use-after-free in deliver_response+0x12f/0x1b0 Read of size 8 at addr ffff888a7bf20018 by task ksoftirqd/3/27 CPU: 3 PID: 27 Comm: ksoftirqd/3 Tainted: G O 4.19.11-amd64-ani99-debug #12.0.1.601133+pv Hardware name: AppNeta r1000/X11SPW-TF, BIOS 2.1a-AP 09/17/2018 Call Trace: dump_stack+0x92/0xeb print_address_description+0x73/0x290 kasan_report+0x258/0x380 deliver_response+0x12f/0x1b0 ? ipmi_free_recv_msg+0x50/0x50 deliver_local_response+0xe/0x50 handle_one_recv_msg+0x37a/0x21d0 handle_new_recv_msgs+0x1ce/0x440 ... Allocated by task 9885: kasan_kmalloc+0xa0/0xd0 kmem_cache_alloc_trace+0x116/0x290 ipmi_alloc_recv_msg+0x28/0x70 i_ipmi_request+0xb4a/0x1640 ipmi_request_settime+0x1b8/0x1e0 ... Freed by task 27: __kasan_slab_free+0x12e/0x180 kfree+0xe9/0x280 deliver_response+0x122/0x1b0 deliver_local_response+0xe/0x50 handle_one_recv_msg+0x37a/0x21d0 handle_new_recv_msgs+0x1ce/0x440 tasklet_action_common.isra.19+0xc4/0x250 __do_softirq+0x11f/0x51f Fixes: e86ee2d4 ("ipmi: Rework locking and shutdown for hot remove") Cc: stable@vger.kernel.org # 4.18 Signed-off-by:
Fred Klassen <fklassen@appneta.com> Signed-off-by:
-
Gustavo A. R. Silva authored
commit a7102c74 upstream. channel and addr->channel are indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. These issues were detected with the help of Smatch: drivers/char/ipmi/ipmi_msghandler.c:1381 ipmi_set_my_address() warn: potential spectre issue 'user->intf->addrinfo' [w] (local cap) drivers/char/ipmi/ipmi_msghandler.c:1401 ipmi_get_my_address() warn: potential spectre issue 'user->intf->addrinfo' [r] (local cap) drivers/char/ipmi/ipmi_msghandler.c:1421 ipmi_set_my_LUN() warn: potential spectre issue 'user->intf->addrinfo' [w] (local cap) drivers/char/ipmi/ipmi_msghandler.c:1441 ipmi_get_my_LUN() warn: potential spectre issue 'user->intf->addrinfo' [r] (local cap) drivers/char/ipmi/ipmi_msghandler.c:2260 check_addr() warn: potential spectre issue 'intf->addrinfo' [r] (local cap) Fix this by sanitizing channel and addr->channel before using them to index user->intf->addrinfo and intf->addrinfo, correspondingly. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/ Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Yang Yingliang authored
commit 77f82696 upstream. When we do the following test, we got oops in ipmi_msghandler driver while((1)) do service ipmievd restart & service ipmievd restart done --------------------------------------------------------------- [ 294.230186] Unable to handle kernel paging request at virtual address 0000803fea6ea008 [ 294.230188] Mem abort info: [ 294.230190] ESR = 0x96000004 [ 294.230191] Exception class = DABT (current EL), IL = 32 bits [ 294.230193] SET = 0, FnV = 0 [ 294.230194] EA = 0, S1PTW = 0 [ 294.230195] Data abort info: [ 294.230196] ISV = 0, ISS = 0x00000004 [ 294.230197] CM = 0, WnR = 0 [ 294.230199] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000a1c1b75a [ 294.230201] [0000803fea6ea008] pgd=0000000000000000 [ 294.230204] Internal error: Oops: 96000004 [#1] SMP [ 294.235211] Modules linked in: nls_utf8 isofs rpcrdma ib_iser ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_umad rdma_cm ib_cm iw_cm dm_mirror dm_region_hash dm_log dm_mod aes_ce_blk crypto_simd cryptd aes_ce_cipher ghash_ce sha2_ce ses sha256_arm64 sha1_ce hibmc_drm hisi_sas_v2_hw enclosure sg hisi_sas_main sbsa_gwdt ip_tables mlx5_ib ib_uverbs marvell ib_core mlx5_core ixgbe ipmi_si mdio hns_dsaf ipmi_devintf ipmi_msghandler hns_enet_drv hns_mdio [ 294.277745] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted 5.0.0-rc2+ #113 [ 294.285511] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.37 11/21/2017 [ 294.292835] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 294.297695] pc : __srcu_read_lock+0x38/0x58 [ 294.301940] lr : acquire_ipmi_user+0x2c/0x70 [ipmi_msghandler] [ 294.307853] sp : ffff00001001bc80 [ 294.311208] x29: ffff00001001bc80 x28: ffff0000117e5000 [ 294.316594] x27: 0000000000000000 x26: dead000000000100 [ 294.321980] x25: dead000000000200 x24: ffff803f6bd06800 [ 294.327366] x23: 0000000000000000 x22: 0000000000000000 [ 294.332752] x21: ffff00001001bd04 x20: ffff80df33d19018 [ 294.338137] x19: ffff80df33d19018 x18: 0000000000000000 [ 294.343523] x17: 0000000000000000 x16: 0000000000000000 [ 294.348908] x15: 0000000000000000 x14: 0000000000000002 [ 294.354293] x13: 0000000000000000 x12: 0000000000000000 [ 294.359679] x11: 0000000000000000 x10: 0000000000100000 [ 294.365065] x9 : 0000000000000000 x8 : 0000000000000004 [ 294.370451] x7 : 0000000000000000 x6 : ffff80df34558678 [ 294.375836] x5 : 000000000000000c x4 : 0000000000000000 [ 294.381221] x3 : 0000000000000001 x2 : 0000803fea6ea000 [ 294.386607] x1 : 0000803fea6ea008 x0 : 0000000000000001 [ 294.391994] Process swapper/3 (pid: 0, stack limit = 0x0000000083087293) [ 294.398791] Call trace: [ 294.401266] __srcu_read_lock+0x38/0x58 [ 294.405154] acquire_ipmi_user+0x2c/0x70 [ipmi_msghandler] [ 294.410716] deliver_response+0x80/0xf8 [ipmi_msghandler] [ 294.416189] deliver_local_response+0x28/0x68 [ipmi_msghandler] [ 294.422193] handle_one_recv_msg+0x158/0xcf8 [ipmi_msghandler] [ 294.432050] handle_new_recv_msgs+0xc0/0x210 [ipmi_msghandler] [ 294.441984] smi_recv_tasklet+0x8c/0x158 [ipmi_msghandler] [ 294.451618] tasklet_action_common.isra.5+0x88/0x138 [ 294.460661] tasklet_action+0x2c/0x38 [ 294.468191] __do_softirq+0x120/0x2f8 [ 294.475561] irq_exit+0x134/0x140 [ 294.482445] __handle_domain_irq+0x6c/0xc0 [ 294.489954] gic_handle_irq+0xb8/0x178 [ 294.497037] el1_irq+0xb0/0x140 [ 294.503381] arch_cpu_idle+0x34/0x1a8 [ 294.510096] do_idle+0x1d4/0x290 [ 294.516322] cpu_startup_entry+0x28/0x30 [ 294.523230] secondary_start_kernel+0x184/0x1d0 [ 294.530657] Code: d538d082 d2800023 8b010c81 8b020021 (c85f7c25) [ 294.539746] ---[ end trace 8a7a880dee570b29 ]--- [ 294.547341] Kernel panic - not syncing: Fatal exception in interrupt [ 294.556837] SMP: stopping secondary CPUs [ 294.563996] Kernel Offset: disabled [ 294.570515] CPU features: 0x002,21006008 [ 294.577638] Memory Limit: none [ 294.587178] Starting crashdump kernel... [ 294.594314] Bye! Because the user->release_barrier.rda is freed in ipmi_destroy_user(), but the refcount is not zero, when acquire_ipmi_user() uses user->release_barrier.rda in __srcu_read_lock(), it causes oops. Fix this by calling cleanup_srcu_struct() when the refcount is zero. Fixes: e86ee2d4 ("ipmi: Rework locking and shutdown for hot remove") Cc: stable@vger.kernel.org # 4.18 Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Johan Hedberg authored
commit 1629db9c upstream. In case a command which completes in Command Status was sent using the hci_cmd_send-family of APIs there would be a misleading error in the hci_get_cmd_complete function, since the code would be trying to fetch the Command Complete parameters when there are none. Avoid the misleading error and silently bail out from the function in case the received event is a command status. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Acked-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Tested-by Adam Ford <aford173@gmail.com> #4.19.16 Signed-off-by:
-
Avraham Stern authored
commit 3baf7528 upstream. The parameter that indicated whether the LQ command should be sent as sync or async was removed, causing the LQ command to be sent as sync from interrupt context (e.g. from the RX path). This resulted in a kernel warning: "scheduling while atomic" and failing to send the LQ command, which ultimately leads to a queue hang. Fix it by adding back the required parameter to send the command as sync only when it is allowed. Fixes: d94c5a82 ("iwlwifi: mvm: open BA session only when sta is authorized") Signed-off-by:
Avraham Stern <avraham.stern@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Michal Hocko authored
[ Upstream commit 7550c607 ] Patch series "THP eligibility reporting via proc". This series of three patches aims at making THP eligibility reporting much more robust and long term sustainable. The trigger for the change is a regression report [2] and the long follow up discussion. In short the specific application didn't have good API to query whether a particular mapping can be backed by THP so it has used VMA flags to workaround that. These flags represent a deep internal state of VMAs and as such they should be used by userspace with a great deal of caution. A similar has happened for [3] when users complained that VM_MIXEDMAP is no longer set on DAX mappings. Again a lack of a proper API led to an abuse. The first patch in the series tries to emphasise that that the semantic of flags might change and any application consuming those should be really careful. The remaining two patches provide a more suitable interface to address [2] and provide a consistent API to query the THP status both for each VMA and process wide as well. [1] http://lkml.kernel.org/r/20181120103515.25280-1-mhocko@kernel.org [2] http://lkml.kernel.org/r/http://lkml.kernel.org/r/alpine.DEB.2.21.1809241054050.224429@chino.kir.corp.google.com [3] http://lkml.kernel.org/r/20181002100531.GC4135@quack2.suse.cz This patch (of 3): Even though vma flags exported via /proc/<pid>/smaps are explicitly documented to be not guaranteed for future compatibility the warning doesn't go far enough because it doesn't mention semantic changes to those flags. And they are important as well because these flags are a deep implementation internal to the MM code and the semantic might change at any time. Let's consider two recent examples: http://lkml.kernel.org/r/20181002100531.GC4135@quack2.suse.cz : commit e1fb4a08 "dax: remove VM_MIXEDMAP for fsdax and device dax" has : removed VM_MIXEDMAP flag from DAX VMAs. Now our testing shows that in the : mean time certain customer of ours started poking into /proc/<pid>/smaps : and looks at VMA flags there and if VM_MIXEDMAP is missing among the VMA : flags, the application just fails to start complaining that DAX support is : missing in the kernel. http://lkml.kernel.org/r/alpine.DEB.2.21.1809241054050.224429@chino.kir.corp.google.com : Commit 18600332 ("mm: make PR_SET_THP_DISABLE immediately active") : introduced a regression in that userspace cannot always determine the set : of vmas where thp is ineligible. : Userspace relies on the "nh" flag being emitted as part of /proc/pid/smaps : to determine if a vma is eligible to be backed by hugepages. : Previous to this commit, prctl(PR_SET_THP_DISABLE, 1) would cause thp to : be disabled and emit "nh" as a flag for the corresponding vmas as part of : /proc/pid/smaps. After the commit, thp is disabled by means of an mm : flag and "nh" is not emitted. : This causes smaps parsing libraries to assume a vma is eligible for thp : and ends up puzzling the user on why its memory is not backed by thp. In both cases userspace was relying on a semantic of a specific VMA flag. The primary reason why that happened is a lack of a proper interface. While this has been worked on and it will be fixed properly, it seems that our wording could see some refinement and be more vocal about semantic aspect of these flags as well. Link: http://lkml.kernel.org/r/20181211143641.3503-2-mhocko@kernel.orgSigned-off-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Jan Kara <jack@suse.cz> Acked-by:
Dan Williams <dan.j.williams@intel.com> Acked-by:
David Rientjes <rientjes@google.com> Acked-by:
Mike Rapoport <rppt@linux.ibm.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Paul Oppenheimer <bepvte@gmail.com> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Peter Xu authored
[ Upstream commit 3cfd22be ] When the process being tracked does mremap() without UFFD_FEATURE_EVENT_REMAP on the corresponding tracking uffd file handle, we should not generate the remap event, and at the same time we should clear all the uffd flags on the new VMA. Without this patch, we can still have the VM_UFFD_MISSING|VM_UFFD_WP flags on the new VMA even the fault handling process does not even know the existance of the VMA. Link: http://lkml.kernel.org/r/20181211053409.20317-1-peterx@redhat.comSigned-off-by:
Peter Xu <peterx@redhat.com> Reviewed-by:
Andrea Arcangeli <aarcange@redhat.com> Acked-by:
Mike Rapoport <rppt@linux.vnet.ibm.com> Reviewed-by:
William Kucharski <william.kucharski@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Hugh Dickins <hughd@google.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Pravin Shedge <pravin.shedge4linux@gmail.com> Signed-off-by:
-
Aaron Lu authored
[ Upstream commit 66f71da9 ] Since a2468cc9 ("swap: choose swap device according to numa node"), avail_lists field of swap_info_struct is changed to an array with MAX_NUMNODES elements. This made swap_info_struct size increased to 40KiB and needs an order-4 page to hold it. This is not optimal in that: 1 Most systems have way less than MAX_NUMNODES(1024) nodes so it is a waste of memory; 2 It could cause swapon failure if the swap device is swapped on after system has been running for a while, due to no order-4 page is available as pointed out by Vasily Averin. Solve the above two issues by using nr_node_ids(which is the actual possible node number the running system has) for avail_lists instead of MAX_NUMNODES. nr_node_ids is unknown at compile time so can't be directly used when declaring this array. What I did here is to declare avail_lists as zero element array and allocate space for it when allocating space for swap_info_struct. The reason why keep using array but not pointer is plist_for_each_entry needs the field to be part of the struct, so pointer will not work. This patch is on top of Vasily Averin's fix commit. I think the use of kvzalloc for swap_info_struct is still needed in case nr_node_ids is really big on some systems. Link: http://lkml.kernel.org/r/20181115083847.GA11129@intel.comSigned-off-by:
Aaron Lu <aaron.lu@intel.com> Reviewed-by:
-
Brian Foster authored
[ Upstream commit 3fa750dc ] write_cache_pages() is used in both background and integrity writeback scenarios by various filesystems. Background writeback is mostly concerned with cleaning a certain number of dirty pages based on various mm heuristics. It may not write the full set of dirty pages or wait for I/O to complete. Integrity writeback is responsible for persisting a set of dirty pages before the writeback job completes. For example, an fsync() call must perform integrity writeback to ensure data is on disk before the call returns. write_cache_pages() unconditionally breaks out of its processing loop in the event of a ->writepage() error. This is fine for background writeback, which had no strict requirements and will eventually come around again. This can cause problems for integrity writeback on filesystems that might need to clean up state associated with failed page writeouts. For example, XFS performs internal delayed allocation accounting before returning a ->writepage() error, where applicable. If the current writeback happens to be associated with an unmount and write_cache_pages() completes the writeback prematurely due to error, the filesystem is unmounted in an inconsistent state if dirty+delalloc pages still exist. To handle this problem, update write_cache_pages() to always process the full set of pages for integrity writeback regardless of ->writepage() errors. Save the first encountered error and return it to the caller once complete. This facilitates XFS (or any other fs that expects integrity writeback to process the entire set of dirty pages) to clean up its internal state completely in the event of persistent mapping errors. Background writeback continues to exit on the first error encountered. [akpm@linux-foundation.org: fix typo in comment] Link: http://lkml.kernel.org/r/20181116134304.32440-1-bfoster@redhat.comSigned-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
-
Junxiao Bi authored
[ Upstream commit 532e1e54 ] mount.ocfs2 ignore the inconsistent error that journal is clean but local alloc is unrecovered. After mount, local alloc not empty, then reserver cluster didn't alloc a new local alloc window, reserveration map is empty(ocfs2_reservation_map.m_bitmap_len = 0), that triggered the following panic. This issue was reported at https://oss.oracle.com/pipermail/ocfs2-devel/2015-May/010854.html and was advised to fixed during mount. But this is a very unusual inconsistent state, usually journal dirty flag should be cleared at the last stage of umount until every other things go right. We may need do further debug to check that. Any way to avoid possible futher corruption, mount should be abort and fsck should be run. (mount.ocfs2,1765,1):ocfs2_load_local_alloc:353 ERROR: Local alloc hasn't been recovered! found = 6518, set = 6518, taken = 8192, off = 15912372 ocfs2: Mounting device (202,64) on (node 0, slot 3) with ordered data mode. o2dlm: Joining domain 89CEAC63CC4F4D03AC185B44E0EE0F3F ( 0 1 2 3 4 5 6 8 ) 8 nodes ocfs2: Mounting device (202,80) on (node 0, slot 3) with ordered data mode. o2hb: Region 89CEAC63CC4F4D03AC185B44E0EE0F3F (xvdf) is now a quorum device o2net: Accepted connection from node yvwsoa17p (num 7) at 172.22.77.88:7777 o2dlm: Node 7 joins domain 64FE421C8C984E6D96ED12C55FEE2435 ( 0 1 2 3 4 5 6 7 8 ) 9 nodes o2dlm: Node 7 joins domain 89CEAC63CC4F4D03AC185B44E0EE0F3F ( 0 1 2 3 4 5 6 7 8 ) 9 nodes ------------[ cut here ]------------ kernel BUG at fs/ocfs2/reservations.c:507! invalid opcode: 0000 [#1] SMP Modules linked in: ocfs2 rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs fscache lockd grace ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sunrpc ipt_REJECT nf_reject_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 ovmapi ppdev parport_pc parport xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea acpi_cpufreq pcspkr i2c_piix4 i2c_core sg ext4 jbd2 mbcache2 sr_mod cdrom xen_blkfront pata_acpi ata_generic ata_piix floppy dm_mirror dm_region_hash dm_log dm_mod CPU: 0 PID: 4349 Comm: startWebLogic.s Not tainted 4.1.12-124.19.2.el6uek.x86_64 #2 Hardware name: Xen HVM domU, BIOS 4.4.4OVM 09/06/2018 task: ffff8803fb04e200 ti: ffff8800ea4d8000 task.ti: ffff8800ea4d8000 RIP: 0010:[<ffffffffa05e96a8>] [<ffffffffa05e96a8>] __ocfs2_resv_find_window+0x498/0x760 [ocfs2] Call Trace: ocfs2_resmap_resv_bits+0x10d/0x400 [ocfs2] ocfs2_claim_local_alloc_bits+0xd0/0x640 [ocfs2] __ocfs2_claim_clusters+0x178/0x360 [ocfs2] ocfs2_claim_clusters+0x1f/0x30 [ocfs2] ocfs2_convert_inline_data_to_extents+0x634/0xa60 [ocfs2] ocfs2_write_begin_nolock+0x1c6/0x1da0 [ocfs2] ocfs2_write_begin+0x13e/0x230 [ocfs2] generic_perform_write+0xbf/0x1c0 __generic_file_write_iter+0x19c/0x1d0 ocfs2_file_write_iter+0x589/0x1360 [ocfs2] __vfs_write+0xb8/0x110 vfs_write+0xa9/0x1b0 SyS_write+0x46/0xb0 system_call_fastpath+0x18/0xd7 Code: ff ff 8b 75 b8 39 75 b0 8b 45 c8 89 45 98 0f 84 e5 fe ff ff 45 8b 74 24 18 41 8b 54 24 1c e9 56 fc ff ff 85 c0 0f 85 48 ff ff ff <0f> 0b 48 8b 05 cf c3 de ff 48 ba 00 00 00 00 00 00 00 10 48 85 RIP __ocfs2_resv_find_window+0x498/0x760 [ocfs2] RSP <ffff8800ea4db668> ---[ end trace 566f07529f2edf3c ]--- Kernel panic - not syncing: Fatal exception Kernel Offset: disabled Link: http://lkml.kernel.org/r/20181121020023.3034-2-junxiao.bi@oracle.comSigned-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
Yiwen Jiang <jiangyiwen@huawei.com> Acked-by:
Joseph Qi <jiangqi903@gmail.com> Cc: Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Changwei Ge <ge.changwei@h3c.com> Signed-off-by:
-
