- 14 Nov, 2006 6 commits
-
-
Nathan Lynch authored
Fix binary/logical operator typo which leads to unreachable code. Noticed while looking at other issues; I don't have the relevant hardware to test this. Signed-off-by:
Nathan Lynch <ntl@pobox.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Acked-by:
James Simmons <jsimmons@infradead.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Ian Kent authored
Resolve the panic on failed mount of an autofs filesystem originally reported by Mao Bibo. It addresses two issues that happen after the mount fail. The first a NULL pointer reference to a field (pipe) in the autofs superblock info structure and second the lack of super block cleanup by the autofs and autofs4 modules. Signed-off-by:
Ian Kent <raven@themaw.net> Signed-off-by:
-
Nicolas Kaiser authored
Stray bracket in debug code. Signed-off-by:
Nicolas Kaiser <nikai@nikai.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Andrew Morton authored
Fix http://bugzilla.kernel.org/show_bug.cgi?id=7264 We need to target this quirk a little more tightly, using the T20 DMI string. Cc: Pavel Kysilka <goldenfish@bsys.cz> Acked-by:
Kristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by:
-
Daniel Ritz authored
Fix interrupt routing for via 586 bridges. pirq can be 5 which needs to be mapped to INTD. But currently the access functions can handle only pirq 1-4. this is similar to the other via chipsets where pirq 4 and 5 are both mapped to INTD. Fixes bugzilla #7490 Cc: Daniel Paschka <monkey20181@gmx.net> Cc: Adrian Bunk <bunk@susta.de> Signed-off-by:
Daniel Ritz <daniel.ritz@gmx.ch> Cc: <stable@kernel.org> Signed-off-by:
-
Andrew Morton authored
When we get a mismatch between handlers on the same IRQ, all we get is "IRQ handler type mismatch for IRQ n". Let's print the name of the presently-registered handler with which we got the mismatch. Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
- 13 Nov, 2006 34 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmcLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: MMC: Do not set unsupported bits in OCR response MMC: Poll card status after rescanning cards
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/mad: Fix race between cancel and receive completion RDMA/amso1100: Fix && typo RDMA/amso1100: Fix unitialized pseudo_netdev accessed in c2_register_device IB/ehca: Activate scaling code by default IB/ehca: Use named constant for max mtu IB/ehca: Assure 4K alignment for firmware control blocks
-
Linus Torvalds authored
Commit 450efcfd broke Avermedia 777 support. Added obvious missing "break" statement. Cc: Jos Surez <j.suarez.agapito@gmail.com> Cc: Michael Krufky <mkrufky@linuxtv.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by:
-
Jens Axboe authored
We should only set ->errors to CHECK_CONDITION and so on for requests that use this field in the SCSI manner. Signed-off-by:
Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Jens Axboe authored
Contrary to what the name misleads you to believe, SG_DXFER_TO_FROM_DEV is really just a normal read seen from the device side. This patch fixes http://lkml.org/lkml/2006/10/13/100Signed-off-by:
-
Roland Dreier authored
When ib_cancel_mad() is called, it puts the canceled send on a list and schedules a "flushed" callback from process context. However, this leaves a window where a receive completion could be processed before the send is fully flushed. This is fine, except that ib_find_send_mad() will find the MAD and return it to the receive processing, which results in the sender getting both a successful receive and a "flushed" send completion for the same request. Understandably, this confuses the sender, which is expecting only one of these two callbacks, and leads to grief such as a use-after-free in IPoIB. Fix this by changing ib_find_send_mad() to return a send struct only if the status is still successful (and not "flushed"). The search of the send_list already had this check, so this patch just adds the same check to the search of the wait_list. Signed-off-by:Roland Dreier <rolandd@cisco.com>
-
Jean Delvare authored
Fix the AMSO1100 firmware version computation, which was broken due to "&&" being used where "&" should have. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Tom Tucker authored
Rework some load-time error handling: c2_register_device() leaked when it failed, and the function that called it didn't check the return code. Signed-off-by:
Tom Tucker <tom@opengridcomputing.com> Signed-off-by:
-
Hoang-Nam Nguyen authored
Change ehca's Kconfig to activates scaling code as default. After several measurements we saw that this feature prevents dropped packets (UD) in stress situation. Thus, enabling it helps to improve ehca's bandwidth through IPoIB. Signed-off-by:
Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by:
-
Hoang-Nam Nguyen authored
Define and use a constant EHCA_MAX_MTU instead hardcoded value. Signed-off-by:
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (4818): Flexcop-usb: fix debug printk V4L/DVB (4817): Fix uses of "&&" where "&" was intended V4L/DVB (4816): Change tuner type for Avermedia A16AR V4L/DVB (4815): Remote support for Avermedia A16AR V4L/DVB (4814): Remote support for Avermedia 777 V4L/DVB (4804): Fix missing i2c dependency for saa7110 V4L/DVB (4802): Cx88: fix remote control on WinFast 2000XP Expert V4L/DVB (4795): Tda826x: use correct max frequency
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] cell: set ARCH_SPARSEMEM_DEFAULT in Kconfig [POWERPC] Fix cell "new style" mapping and add debug [POWERPC] pseries: Force 4k update_flash block and list sizes [POWERPC] CPM_UART: Fix non-console initialisation [POWERPC] CPM_UART: Fix non-console transmit [POWERPC] Make sure initrd and dtb sections get into zImage correctly
-
git://oss.sgi.com:8090/xfs/xfs-2.6Linus Torvalds authored
* git://oss.sgi.com:8090/xfs/xfs-2.6: [XFS] Remove KERNEL_VERSION macros from xfs_dmapi.h [XFS] Prevent a deadlock when xfslogd unpins inodes. [XFS] Clean up i_flags and i_flags_lock handling. [XFS] 956664: dm_read_invis() changes i_atime [XFS] rename uio_read() to xfs_uio_read() [XFS] Keep lockdep happy. [XFS] 956618: Linux crashes on boot with XFS-DMAPI filesystem when
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPVS]: More endianness fixed. [IPVS]: Compile fix for annotations in userland.
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] Fix minor problem with previous patch [CIFS] Fix mount failure when domain not specified [CIFS] Explicitly set stat->blksize [CIFS] NFS stress test generates flood of "close with pending write" messages
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] drivers cris: return on NULL dev_alloc_skb() [PATCH] com20020 build fix [PATCH] bonding: lockdep annotation [PATCH] bcm43xx: Add error checking in bcm43xx_sprom_write() [PATCH] bcm43xx: Drain TX status before starting IRQs
-
Alan Stern authored
This patch (as810c) copies a minimum of 36 bytes of INQUIRY data, even if the device claims that not all of them are valid. Often badly behaved devices put plausible data in the Vendor, Product, and Revision strings but set the Additional Length byte to a small value. Using potentially valid data is certainly better than allocating a short buffer and then reading beyond the end of it, which is what we do now. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Pavel Emelianov authored
While testing kernel on machine with "irqpoll" option I've caught such a lockup: __do_IRQ() spin_lock(&desc->lock); desc->chip->ack(); /* IRQ is ACKed */ note_interrupt() misrouted_irq() handle_IRQ_event() if (...) local_irq_enable_in_hardirq(); /* interrupts are enabled from now */ ... __do_IRQ() /* same IRQ we've started from */ spin_lock(&desc->lock); /* LOCKUP */ Looking at misrouted_irq() code I've found that a potential deadlock like this can also take place: 1CPU: __do_IRQ() spin_lock(&desc->lock); /* irq = A */ misrouted_irq() for (i = 1; i < NR_IRQS; i++) { spin_lock(&desc->lock); /* irq = B */ if (desc->status & IRQ_INPROGRESS) { 2CPU: __do_IRQ() spin_lock(&desc->lock); /* irq = B */ misrouted_irq() for (i = 1; i < NR_IRQS; i++) { spin_lock(&desc->lock); /* irq = A */ if (desc->status & IRQ_INPROGRESS) { As the second lock on both CPUs is taken before checking that this irq is being handled in another processor this may cause a deadlock. This issue is only theoretical. I propose the attached patch to fix booth problems: when trying to handle misrouted IRQ active desc->lock may be unlocked. Acked-by:Ingo Molnar <mingo@redhat.com> Signed-off-by:
-
Sharyathi Nagesh authored
On running the Stress Test on machine for more than 72 hours following error message was observed. 0:mon> e cpu 0x0: Vector: 300 (Data Access) at [c00000007ce2f7f0] pc: c000000000060d90: .dup_fd+0x240/0x39c lr: c000000000060d6c: .dup_fd+0x21c/0x39c sp: c00000007ce2fa70 msr: 800000000000b032 dar: ffffffff00000028 dsisr: 40000000 current = 0xc000000074950980 paca = 0xc000000000454500 pid = 27330, comm = bash 0:mon> t [c00000007ce2fa70] c000000000060d28 .dup_fd+0x1d8/0x39c (unreliable) [c00000007ce2fb30] c000000000060f48 .copy_files+0x5c/0x88 [c00000007ce2fbd0] c000000000061f5c .copy_process+0x574/0x1520 [c00000007ce2fcd0] c000000000062f88 .do_fork+0x80/0x1c4 [c00000007ce2fdc0] c000000000011790 .sys_clone+0x5c/0x74 [c00000007ce2fe30] c000000000008950 .ppc_clone+0x8/0xc The problem is because of race window. When if(expand) block is executed in dup_fd unlocking of oldf->file_lock give a window for fdtable in oldf to be modified. So actual open_files in oldf may not match with open_files variable. Cc: Vadim Lobanov <vlobanov@speakeasy.net> Cc: <stable@kernel.org> Signed-off-by: -
Franck Bui-Huu authored
Prevent git from reporting this useless status: On branch refs/heads/master Untracked files: (use "git add" to add to commit) TAGS scripts/kconfig/lkc_defs.h scripts/kconfig/qconf.moc nothing to commit Signed-off-by:
Franck Bui-Huu <fbuihuu@gmail.com> Signed-off-by:
-
Russell King authored
If you call set_personality() with an expression such as: set_personality(foo ? PERS_FOO1 : PERS_FOO2); then this evaluates to: ((current->personality == foo ? PERS_FOO1 : PERS_FOO2) ? ... which is obviously not the intended result. Add the missing parents to ensure this gets evaluated as expected: ((current->personality == (foo ? PERS_FOO1 : PERS_FOO2)) ? ... Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Wink Saville authored
The following patch resolves the divide by zero error I encountered on my system: http://marc.10east.com/?l=linux-fbdev-devel&m=116058257024413&w=2 I accomplished this by merging what I thought was appropriate from: http://webcvs.freedesktop.org/xorg/driver/xf86-video-nv/src/Signed-off-by:
-
Corey Minyard authored
Fix improper use of "&&" when "&" was intended. Signed-off-by:
Corey Minyard <minyard@acm.org> Signed-off-by:
-
Jes Sorensen authored
Fix MSPEC driver to build for non SN2 enabled configs as the driver should work in cached and uncached modes (no fetchop) on these systems. In addition make MSPEC select IA64_UNCACHED_ALLOCATOR, which is required for it and move it to arch/ia64/Kconfig to avoid warnings on non ia64 architectures running allmodconfig. Once the Kconfig code is fixed, we can move it back. Signed-off-by:
Jes Sorensen <jes@sgi.com> Cc: Fernando Luis Vzquez Cao <fernando@oss.ntt.co.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by:
-
David Miller authored
The PCI sysfs attributes are created after the initial PCI bus scan. With the addition of more return value checking and assertions in the device and sysfs layers we now can get dumps like this on sparc64: [ 20.135032] Call Trace: [ 20.135042] [0000000000537f88] pci_remove_bus_device+0x30/0xc0 [ 20.135076] [000000000078f890] pci_fill_in_pbm_cookies+0x98/0x440 [ 20.135109] [000000000042e828] sabre_scan_bus+0x230/0x400 [ 20.135139] [000000000078c710] pcibios_init+0x58/0xa0 [ 20.135159] [0000000000416f14] init+0x9c/0x2e0 [ 20.135190] [0000000000417a50] kernel_thread+0x38/0x60 [ 20.135211] [0000000000417170] rest_init+0x18/0x40 [ 20.135514] PCI0(PBMB): Bus running at 33MHz It's triggering because removal of the "config" PCI sysfs file for the device fails. On sparc64, after probing the device, we'll delete the PCI device via pci_remove_bus_device() if we cannot find the firmware device tree node corresponding to it. This is fine, but at this point the sysfs files for the PCI device won't be setup yet. So we should not try to do anything in pci_remove_sysfs_dev_files() if pci_sysfs_init() has not run yet. Signed-off-by:
David S. Miller <davem@davemloft.net> Acked-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Eric Dumazet authored
- reorder 'struct vm_struct' to speedup lookups on CPUS with small cache lines. The fields 'next,addr,size' should be now in the same cache line, to speedup lookups. - One minor cleanup in __get_vm_area_node() - Bugfixes in vmalloc_user() and vmalloc_32_user() NULL returns from __vmalloc() and __find_vm_area() were not tested. [akpm@osdl.org: remove redundant BUG_ONs] Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
Alexey Dobriyan authored
.. fix debug printk. Why, oh why, one would want to do (u16 & 0xff) << 8 and print it with %02x format? Acked-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Jean Delvare authored
Fix uses of "&&" where "&" was intended in bttv-cards.c and tveeprom.c Signed-off-by:
-
pasky@ucw.cz authored
This changes it from TDA8290 which is allegedly very unlikely to TD1316 which is allegedly very likely. I didn't get it to work with either, but expected that this got applied when Mauro sent it to me, so here it goes again; feel free to drop it to the floor. :-) Signed-off-by:
Petr Baudis <pasky@ucw.cz> Signed-off-by:
-
pasky@ucw.cz authored
The remote as well as the GPIO interface is the same as what comes with 777. For an example of mplayer lirc configuration, see http://pasky.or.cz/~pasky/dev/v4l/lircrcSigned-off-by:
-
pasky@ucw.cz authored
I didn't test it personally since I don't have this card, but A16AR uses the same interface and that one certainly does work perfectly (see the next patch). This patch was originally sent in http://marc.theaimsgroup.com/?l=linux-video&m=114743413825375&w=2 https://www.redhat.com/mailman/private/video4linux-list/2006-May/msg00103.html but never got applied. This version has some trivial modifications and drops the weird gpio hack (it's not clear what practical purpose does it serve). Signed-off-by:
Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/video/saa7110.c:112: undefined reference to `i2c_master_send' drivers/built-in.o: In function `saa7110_read': drivers/media/video/saa7110.c:130: undefined reference to `i2c_smbus_read_byte' drivers/media/video/saa7110.c:130: undefined reference to `i2c_smbus_read_byte' Signed-off-by: -
Hermann Pitton authored
fix remote control on WinFast 2000XP Expert by setting timing back to 1 ms, like it was in the original patch by Robert Reid. Signed-off-by:
Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by:
-
Alexey Dobriyan authored
sparse "defined twice" warning Signed-off-by:
-
