tilcdc changes for v4.6

Accumulated fixes and improvements from ti-linux-4.1.
* Almost complete rewrite of pagefliping code
* dma-buf support
* pinctrl support
* lot of fixes and cleanups

* tag 'tilcdc-4.6' of https://github.com/jsarha/linux: (22 commits)
  drm/tilcdc: Use devm_kzalloc() and devm_kcalloc() for private data
  drm/tilcdc: Initialize crtc->port
  drm/tilcdc: Disable sync lost interrupt if it fires on every frame
  drm/tilcdc: Add prints on sync lost and FIFO underrun interrupts
  drm/tilcdc: Remove the duplicate LCDC_INT_ENABLE_SET_REG in registers[]
  drm/tilcdc: Fix interrupt enable/disable code for version 2 tilcdc
  drm/tilcdc: Do not update the next frame buffer close to vertical blank
  drm/tilcdc: Get rid of complex ping-pong mechanism
  drm/tilcdc: cleanup irq handling
  drm/tilcdc: remove broken error handling
  drm/tilcdc: split reset to a separate function
  drm/tilcdc: disable crtc on unload
  drm/tilcdc: cleanup runtime PM handling
  drm/tilcdc: Allocate register storage based on the actual number registers
  drm/tilcdc: fix build error when !CONFIG_CPU_FREQ
  drm/tilcdc: Implement dma-buf support for tilcdc
  drm/tilcdc: disable the lcd controller/dma engine when suspend invoked
  drm/tilcdc: make frame_done interrupt active at all times
  drm/tilcdc: fix kernel panic on suspend when no hdmi monitor connected
  drm/tilcdc: adopt pinctrl support
  ...

omapdrm changes for v4.6

* HDMI interlace output support
* DMAbuf import support
* Big refactoring leading to removal of legacy code
* Various non-critical fixes

* tag 'omapdrm-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (76 commits)
  drm/omap: no need to select OMAP2_DSS
  drm/omap: gem: Fix omap_gem_new() error path
  drm/omap: remove -Werror from Makefile
  drm/omap: remove dispc_ovl_check()
  drm/omap: remove dss compat code
  drm/omap: remove last uses of omap_overlay_manager
  drm/omap: DSI: remove uses of omap_overlay_manager
  drm/omap: VENC: remove uses of omap_overlay_manager
  drm/omap: SDI: remove uses of omap_overlay_manager
  drm/omap: HDMI4: remove uses of omap_overlay_manager
  drm/omap: HDMI5: remove uses of omap_overlay_manager
  drm/omap: DPI: remove uses of omap_overlay_manager
  drm/omap: remove extra manager checks on disconnect
  drm/omap: remove extra check in dpi and sdi
  drm/omap: convert dss_mgr_unregister_framedone_handler to accept omap_channel
  drm/omap: convert dss_mgr_register_framedone_handler to accept omap_channel
  drm/omap: convert dss_mgr_start_update to accept omap_channel
  drm/omap: convert dss_mgr_disable to accept omap_channel
  drm/omap: convert dss_mgr_enable to accept omap_channel
  drm/omap: convert dss_mgr_set_lcd_config to accept omap_channel
  ...

Big ticket items are hdmi support for 8996 (aka snapdragon 820), and
adreno 430 support.  Also one more small uapi addition to support
timestamp queries.

* 'msm-next' of git://people.freedesktop.org/~robclark/linux: (29 commits)
  drm/msm: rename hdmi symbols
  drm/msm/adreno: remove duplicate adreno_hw_init() call
  drm/msm: add timestamp param
  drm/msm: fix small typo
  drm/msm: grab struct_mutex after allocating submit
  drm/msm: reject submit ioctl if no gpu
  drm/msm/adreno: print details in case of a protect fault interrupt
  drm/msm/adreno: get CP_RPTR from register instead of shadow memory
  drm/msm/adreno: add adreno430 power control
  drm/msm/adreno: support for adreno 430.
  drm/msm: update generated headers
  drm/msm/dsi: fix definition of msm_dsi_pll_28nm_8960_init()
  drm/msm/dsi: Parse DSI lanes via DT
  drm/msm/dsi: Drop VDD regulator for MSM8916
  drm/msm/dsi: Remove incorrect warning on host attach
  drm/msm: Free fb helper resources in msm_unload
  drm/msm/mdp: Detach iommu in mdp4_destroy
  drm/msm: make iommu port names const'ier
  drm/msm/mdp: Use atomic helper to set crtc property
  dt-bindings: msm/hdmi: Add HDMI PHY bindings
  ...

Global symbols in the kernel should be prefixed by the name
of the subsystem and/or driver to avoid conflicts when all
code is built-in.

In this case, function names like 'hdmi_register' or 'hdmi_set_mode'
are way too generic for an MSM specific DRM driver, so I'm renaming
them all to msm_hdmi_* here.

I also rename a lot of the 'static' symbols along with the global
names for consistency, even though those are relatively harmless;
they might only be slightly confusing when they show up in
backtraces.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Not sure where it came from, but seem unintentional.  And also not
needed on a420, so let's just drop it.
Signed-off-by: Rob Clark <robdclark@gmail.com>

We need this for GL_TIMESTAMP queries.

Note: currently only supported on a4xx.. a3xx doesn't have this
always-on counter.  I think we could emulate it with the one CP
counter that is available, but for now it is of limited usefulness
on a3xx (since we can't seem to do time-elapsed queries in any sane
way with the existing firmware on a3xx, and if you are trying to do
profiling on a tiler you want time-elapsed).  We can add that later
if it becomes useful.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>

No real need to hold the lock over allocation, and simplifies things
slightly if we change the order.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Existing userspace wouldn't get this far, since getparam ioctl would
have failed and it would have bailed out creating a screen/context.

But all the same, we shouldn't let evil or confused userspace cause a
null ptr deref.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Craig Stout <cstout@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

As described in the downstream/kgsl driver:
Sometimes the RPTR shadow memory is unreliable causing timeouts
in adreno_idle().  Read it directly from the register instead.
Signed-off-by: Craig Stout <cstout@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Craig Stout <cstout@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Craig Stout <cstout@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Pull in additional regs needed for a430, etc.
Signed-off-by: Rob Clark <robdclark@gmail.com>

This fixes the following build failure:

drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.o: In function `msm_dsi_pll_28nm_8960_init':
dsi_pll_28nm.c:(.text+0x1198): multiple definition of `msm_dsi_pll_28nm_8960_init'
drivers/gpu/drm/msm/dsi/pll/dsi_pll.o:dsi_pll.c:(.text+0x0): first defined here
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Acked-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

The DSI driver is currently unaware of how the DSI physical data lanes
are mapped to the logical lanes provided by the DSI controller.

Create a DT binding "qcom,data-lane-map" that provides this information
on a given platform.

The MSM DSI controller is restricted in terms of what all mappings
it can support. The lane polarity is fixed for all the lanes, the clock
lanes are fixed, and the data lanes can be swapped among each other only
for a few combinations. Apply these restrictions when we parse the DT
data.

Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>

omapdss driver now depends on omapdrm, so we no longer should select
OMAP2_DSS from omapdrm's Kconfig.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

When an error occurs in omap_gem_new() the function calls
omap_gem_free_object() to clean up. However, that function expects to be
called on a fully initialized GEM object and thus crashes.

Replace it by manual cleanup.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Having -Werror in the omapdrm Makefile makes development and debugging a
PITA. Let's remove it.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

dispc_ovl_check() is not used anywhere, so it can be removed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We have removed all the uses of compat code from omapdrm and the
non-compat parts of omapdss, so now we can remove all the compat code
itself.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We have now removed all uses of 'struct omap_overlay_manager', so we can
now remove the last places where it is set.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We are removing the uses of 'struct omap_overlay_manager'. This patch
changes DSI driver to use 'omap_channel' instead.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We are removing the uses of 'struct omap_overlay_manager'. This patch
changes VENC driver to use 'omap_channel' instead.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We are removing the uses of 'struct omap_overlay_manager'. This patch
changes SDI driver to use 'omap_channel' instead.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We are removing the uses of 'struct omap_overlay_manager'. This patch
changes HDMI4 driver to use 'omap_channel' instead.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We are removing the uses of 'struct omap_overlay_manager'. This patch
changes HDMI5 driver to use 'omap_channel' instead.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We are removing the uses of 'struct omap_overlay_manager'. This patch
changes DPI driver to use 'omap_channel' instead.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

The DSS output drivers check 'dssdev->manager' in disconnect()
functions. This check is not needed as the manager must always be set if
the output device was connected. Remove the check.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Both dpi and sdi check for 'mgr != NULL' in check_timings. This check is
not necessary, as mgr must always be set before check_timings. Remove
the check.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_unregister_framedone_handler() to accept 'enum
omap_channel' instead of 'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_register_framedone_handler() to accept 'enum
omap_channel' instead of 'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_start_update() to accept 'enum omap_channel' instead of
'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_disable() to accept 'enum omap_channel' instead of
'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_enable() to accept 'enum omap_channel' instead of
'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_set_lcd_config() to accept 'enum omap_channel' instead
of 'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_set_timings() to accept 'enum omap_channel' instead of
'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_disconnect() to accept 'enum omap_channel' instead of
'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

We are removing uses of 'struct omap_overlay_manager'. This patch
changes dss_mgr_connect() to accept 'enum omap_channel' instead of
'struct omap_overlay_manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Use 'out->dispc_channel_connected' to check if the device is connected
to an overlay manager or not, instead of using 'out->manager'.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>