- 14 Jul, 2020 32 commits
-
-
Petr Machata authored
The field "dev" in struct mlxsw_sp_flow_block_binding is not used. Drop it. Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Petr Machata authored
No clean-up is performed at the target label of this goto. Convert it to a direct return. Signed-off-by:
-
Ido Schimmel authored
While the binding of global mirroring triggers to a SPAN agent is global, packets are only mirrored if they belong to a port and TC on which the trigger was enabled. This allows, for example, to mirror packets that were tail-dropped on a specific netdev. Implement the operations that allow to enable / disable a global mirroring trigger on a specific port and TC. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
-
Ido Schimmel authored
Global mirroring triggers are triggers that are only keyed by their trigger, as opposed to per-port triggers, which are keyed by their trigger and port. Such triggers allow mirroring packets that were tail/early dropped or ECN marked to a SPAN agent. Implement the previously added trigger operations for these global triggers. Since such triggers are only supported from Spectrum-2 onwards, have the Spectrum-1 operations return an error. Signed-off-by:
-
Ido Schimmel authored
Currently, a SPAN agent can only be bound to a per-port trigger where the trigger is either an incoming packet (INGRESS) or an outgoing packet (EGRESS) to / from the port. The subsequent patch will introduce the concept of global mirroring triggers. The binding / unbinding of global triggers is different than that of per-port triggers. Such triggers also need to be enabled / disabled on a per-{port, TC} basis and are only supported from Spectrum-2 onwards. Add trigger operations that allow us to abstract these differences. Only implement the operations for per-port triggers. Next patch will implement the operations for global triggers. Signed-off-by: -
Ido Schimmel authored
The per-ASIC SPAN operations are relevant to the SPAN module and therefore should be implemented there and not in the main driver file. Move them. These operations will be extended later on. Signed-off-by:
-
Amit Cohen authored
This register is used for global port analyzer configurations. Signed-off-by:
Amit Cohen <amitc@mellanox.com> Reviewed-by:
-
Amit Cohen authored
This register is used to configure the mirror enable for different mirror reasons. Signed-off-by:
-
Petr Machata authored
Previously, shared blocks were only relevant for the pseudo-qdiscs ingress and clsact. Recently, a qevent facility was introduced, which allows to bind blocks to well-defined slots of a qdisc instance. RED in particular got two qevents: early_drop and mark. Drivers that wish to offload these blocks will be sent the usual notification, and need to know which qdisc it is related to. To that end, extend flow_block_offload with a "sch" pointer, and initialize as appropriate. This prompts changes in the indirect block facility, which now tracks the scheduler in addition to the netdevice. Update signatures of several functions similarly. Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== net simple kerneldoc fixes This is a collection of simple kerneldoc fixes. They are all low hanging fruit, were not real understanding of the code was needed. ==================== Signed-off-by: -
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Cc: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Cc: Jon Maloy <jmaloy@redhat.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Andrew Lunn authored
Fix the warning "Function parameter or member 'inode' not described in '__sock_release'' due to the kerneldoc being placed before __sock_release() not sock_release(), which does not take an inode parameter. Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Cc: Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Cc: Paul Moore <paul@paul-moore.com> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Jozsef Kadlecsik <kadlec@netfilter.org> Cc: Florian Westphal <fw@strlen.de> Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Cc: Paul Moore <paul@paul-moore.com> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Andrew Lunn authored
Simple fixes which require no deep knowledge of the code. Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Latchesar Ionkov <lucho@ionkov.net> Cc: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by:
-
Alex Elder authored
This commit affects comments (and in one case, whitespace) only. Throughout the IPA code, return statements are documented using "@Return:", whereas they should use "Return:" instead. Fix these mistakes. In function definitions, some parameters are missing their comment to describe them. And in structure definitions, some fields are missing their comment to describe them. Add these missing descriptions. Some arguments changed name and type along the way, but their descriptions were not updated (an endpoint pointer is now used in many places that previously used an endpoint ID). Fix these incorrect parameter descriptions. In the description for the ipa_clock structure, one field had a semicolon instead of a colon in its description. Fix this. Add a missing function description for ipa_gsi_endpoint_data_empty(). All of these issues were identified when building with "W=1". Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by:
-
- 13 Jul, 2020 5 commits
-
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: -
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: -
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: -
Tetsuo Handa authored
kbuild test robot found that addr_to_string() is available only when DEBUG is defined. And I found that what that function is doing is what %pM will do. Thus, replace %s with %pM and remove thread-unsafe addr_to_string() function. Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
-
Nikolay Aleksandrov authored
If bridge vlan filtering is not defined we won't have br_vlan_can_enter_range and thus will get a compile error as was reported by Stephen and the build bot. So let's define a stub for when vlan filtering is not used. Fixes: 94339443 ("net: bridge: notify on vlan tunnel changes done via the old api") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
- 12 Jul, 2020 3 commits
-
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GPF_ with a correct flag. It has been compile tested. When memory is allocated in 'sky2_alloc_buffers()', GFP_KERNEL can be used because some other memory allocations in the same function already use this flag. When memory is allocated in 'sky2_probe()', GFP_KERNEL can be used because another memory allocations in the same function already uses this flag. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GPF_ with a correct flag. It has been compile tested. When memory is allocated in 'skge_up()', GFP_KERNEL can be used because some other memory allocations done a few lines below in 'skge_ring_alloc()' already use this flag. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== Fix MTU warnings for fec/mv886xxx combo Since changing the MTU of dsa slave interfaces was implemented, the fec/mv88e6xxx combo has been giving warnings: [ 2.275925] mv88e6085 0.2:00: nonfatal error -95 setting MTU on port 9 [ 2.284306] eth1: mtu greater than device maximum [ 2.287759] fec 400d1000.ethernet eth1: error -22 setting MTU to include DSA overhead This patchset adds support for changing the MTU on mv88e6xxx switches, which do support jumbo frames. And it modifies the FEC driver to support its true MTU range, which is larger than the default Ethernet MTU. ==================== Tested-by:
Chris Healy <cphealy@gmail.com> Signed-off-by:
-
