- 10 May, 2016 1 commit
-
-
Clifton Barnes authored
fix checkpatch.pl warning about 'Prefer 'unsigned int' to bare use of 'unsigned'' Signed-off-by: Clifton Barnes <clifton.a.barnes@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 04 May, 2016 2 commits
-
-
Ming Lei authored
Complete() will be run with interrupt enabled, so change to spin_lock_irqsave(). Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Florian Euchner authored
The CM109 driver reported key press events of volume up / down and record / playback mute buttons, but no release events. Report those events properly by handling volume and mute keys seperately. For the record and playback mute buttons, only presses are registered by the CM109, therefore simulate press-n-release. This fixes the volume control buttons of various USB headsets. Signed-off-by: Florian Euchner <florian.euchner@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 29 Apr, 2016 2 commits
-
-
Vladimir Zapolskiy authored
Since memory for a private data is allocated by kzalloc() there is no need to fill it with zeroes immediately after the allocation. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Rui Teng authored
The bitwise shift operator has lower priority than plus operator. So the values on macros should be enclosed in parentheses. For example, "(1 << 4 + 1)" means "(1 << (4 + 1))", but it is not expected by the macros. And also fix other two coding style problems reported by scripts/checkpatch.pl. Signed-off-by: Rui Teng <rui.teng@linux.vnet.ibm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 25 Apr, 2016 1 commit
-
-
H. Nikolaus Schaller authored
The mutex does not seem to be needed. twl4030-vibra doesn't use one either. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 20 Apr, 2016 1 commit
-
-
Geert Uytterhoeven authored
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 06 Apr, 2016 1 commit
-
-
Raveendra Padasalagi authored
In Cygnus SOC touch screen controller registers are shared with ADC and flex timer. Using readl/writel could lead to race condition. So touch screen driver is enhanced to support register access using syscon framework API's to take care of mutually exclusive access. Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 05 Apr, 2016 4 commits
-
-
Dmitry Torokhov authored
Instead of doing the dance with macro that either resolves to a pointer or NULL, let's switch to using SIMPLE_DEV_PM_OPS(). Also let's mark suspend and resume methods as __maybe_unused instead of guarding them with an #ifdef and rely on linker to drop unused code. Doing so should allow better compile coverage. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Commit f799a3d8 ("Input: omap-keypad: Remove dependencies to mach includes") removed users of the above functions, but left them in the code. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
There is no reason to have empty suspend and resume stubs. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
As of 35f8679f ("Input: omap-keypad - remove dead check") we no longer declare keypresses as spurious, therefore we can use constant delay between scans. Suggested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 31 Mar, 2016 5 commits
-
-
Andreas Färber authored
Drop #address-cells and #size-cells, which are not required by the gpio-keys binding documentation, as button sub-nodes are not devices. Rename sub-nodes to avoid new dtc unit address warnings when copied. While at it, adopt the dashes convention for the node name. Reported-by: Julien Chauveau <chauveau.julien@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Julien Chauveau <chauveau.julien@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Oliver Neukum authored
The device can now easily be derived from the interface. Stop leaving a private copy. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Oliver Neukum authored
The device can now easily be derived from the interface. Stop leaving a private copy. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Oliver Neukum authored
The device can now easily be derived from the interface. Stop leaving a private copy. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Oliver Neukum authored
The device can now easily be derived from the interface. Stop leaving a private copy. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 24 Mar, 2016 2 commits
-
-
Oliver Neukum authored
During the initialisation the driver uses a buffer on the stack for DMA. That violates the cache coherency rules. The fix is to allocate the buffer with kmalloc(). Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Vladis Dronov authored
The ati_remote2 driver expects at least two interfaces with one endpoint each. If given malicious descriptor that specify one interface or no endpoints, it will crash in the probe function. Ensure there is at least two interfaces and one endpoint for each interface before using it. The full disclosure: http://seclists.org/bugtraq/2016/Mar/90Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 18 Mar, 2016 3 commits
-
-
Benjamin Tissoires authored
Looks like the fimware 8.2 still has the extra buttons spurious release bug. Link: https://bugzilla.kernel.org/show_bug.cgi?id=114321 Cc: stable@vger.kernel.org Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Andrew Duggan authored
Originally the irq_mask member of rmi_function was a pointer. Then it was switched to being a zero length array. However, the checks for a NULL pointer where not removed. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Richard Pospesel authored
The Windows driver's settings dialog contains a visualization of the regions for the hardware edge scrolling capability, which uses a temporarily-enabled limited-resolution absolute mode. This patch enables this during normal operation, and combines the absolute packets with the existing relative packets to provide accurate absolute position and touch reporting. It also adds documentation for all known gesture packets and initialization commands. Reviewed-by: Chris Diamand <chris@diamand.org> Signed-off-by: Richard Pospesel <pospeselr@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 17 Mar, 2016 1 commit
-
-
Oliver Neukum authored
A malicious device missing interface can make the driver oops. Add sanity checking. Signed-off-by: Oliver Neukum <ONeukum@suse.com> CC: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 16 Mar, 2016 1 commit
-
-
Sangwon Jee authored
Add hw_version sysfs attribute for retrieving hardware information from firmware. Signed-off-by: Sangwon Jee <jeesw@melfas.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 15 Mar, 2016 3 commits
-
-
Arnd Bergmann authored
gcc-6.0 notices that the use of the property_entry in this file that was recently introduced cannot work right, as we initialize the wrong field: raumfeld.c:387:3: error: the address of 'raumfeld_rotary_encoder_steps' will always evaluate as 'true' [-Werror=address] DEV_PROP_U32, 1, &raumfeld_rotary_encoder_steps, }, ^~~~~~~~~~~~ raumfeld.c:389:3: error: the address of 'raumfeld_rotary_encoder_axis' will always evaluate as 'true' [-Werror=address] DEV_PROP_U32, 1, &raumfeld_rotary_encoder_axis, }, ^~~~~~~~~~~~ raumfeld.c:391:3: error: the address of 'raumfeld_rotary_encoder_relative_axis' will always evaluate as 'true' [-Werror=address] DEV_PROP_U32, 1, &raumfeld_rotary_encoder_relative_axis, }, ^~~~~~~~~~~~ The problem appears to stem from relying on an old definition of 'struct property', but it has changed several times since the code could have last been correct. This changes the code to use the PROPERTY_ENTRY_INTEGER() macro instead, which works fine for the current definition and is a safer way of doing the initialization. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: a9e340dc ("Input: rotary_encoder - move away from platform data structure") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Merge with Linux 4.5 to get PROPERTY_ENTRY_INTEGER() that is needed to fix pxa/raumfeld rotary encoder properties.
-
Dan Carpenter authored
There is a typo so we have && instead of &. Fixes: ff8f8370 ('Input: synaptics-rmi4 - add support for 2D sensors and F11') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 14 Mar, 2016 2 commits
-
-
Josh Boyer authored
The powermate driver expects at least one valid USB endpoint in its probe function. If given malicious descriptors that specify 0 for the number of endpoints, it will crash. Validate the number of endpoints on the interface before using them. The full report for this issue can be found here: http://seclists.org/bugtraq/2016/Mar/85Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Linus Torvalds authored
-
- 13 Mar, 2016 8 commits
-
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "Another round of MIPS fixes for 4.5: - Fix JZ4780 build with DEBUG_ZBOOT and MACH_JZ4780 - Fix build with DEBUG_ZBOOT and MACH_JZ4780 - Fix issue with uninitialised temp_foreign_map - Fix awk regex compile failure with certain versions of awk. At this time, the sole user, ld-ifversion, is only used on MIPS" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: smp.c: Fix uninitialised temp_foreign_map MIPS: Fix build error when SMP is used without GIC ld-version: Fix awk regex compile failure MIPS: Fix build with DEBUG_ZBOOT and MACH_JZ4780
-
James Hogan authored
When calculate_cpu_foreign_map() recalculates the cpu_foreign_map cpumask it uses the local variable temp_foreign_map without initialising it to zero. Since the calculation only ever sets bits in this cpumask any existing bits at that memory location will remain set and find their way into cpu_foreign_map too. This could potentially lead to cache operations suboptimally doing smp calls to multiple VPEs in the same core, even though the VPEs share primary caches. Therefore initialise temp_foreign_map using cpumask_clear() before use. Fixes: cccf34e9 ("MIPS: c-r4k: Fix cache flushing for MT cores") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12759/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Hauke Mehrtens authored
The MIPS_GIC_IPI should only be selected when MIPS_GIC is also selected, otherwise it results in a compile error. smp-gic.c uses some functions from include/linux/irqchip/mips-gic.h like plat_ipi_call_int_xlate() which are only added to the header file when MIPS_GIC is set. The Lantiq SoC does not use the GIC, but supports SMP. The calls top the functions from smp-gic.c are already protected by some #ifdefs The first part of this was introduced in commit 72e20142 ("MIPS: Move GIC IPI functions out of smp-cmp.c") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: Paul Burton <paul.burton@imgtec.com> Cc: stable@vger.kernel.org # v3.15+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12774/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
James Hogan authored
The ld-version.sh script fails on some versions of awk with the following error, resulting in build failures for MIPS: awk: scripts/ld-version.sh: line 4: regular expression compile failed (missing '(') This is due to the regular expression ".*)", meant to strip off the beginning of the ld version string up to the close bracket, however brackets have a meaning in regular expressions, so lets escape it so that awk doesn't expect a corresponding open bracket. Fixes: ccbef167 ("Kbuild, lto: add ld-version and ld-ifversion ...") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Hogan <james.hogan@imgtec.com> Tested-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Cc: Michal Marek <mmarek@suse.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-mips@linux-mips.org Cc: linux-kbuild@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # 4.4.x- Patchwork: https://patchwork.linux-mips.org/patch/12838/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Aaro Koskinen authored
Ingenic SoC declares ZBOOT support, but debug definitions are missing for MACH_JZ4780 resulting in a build failure when DEBUG_ZBOOT is set. The UART addresses are same as with JZ4740, so fix by covering JZ4780 with those as well. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12830/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block merge fix from Jens Axboe. This fixes the block segment counting bug and resulting sg overrun reported by Kent Overstreet, introduced with the last block pull. * 'for-linus' of git://git.kernel.dk/linux-block: block: don't optimize for non-cloned bio in bio_get_last_bvec()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "This fixes 3 FPU handling related bugs, an EFI boot crash and a runtime warning. The EFI fix arrived late but I didn't want to delay it to after v4.5 because the effects are pretty bad for the systems that are affected by it" [ Actually, I don't think the EFI fix really matters yet, because we haven't switched to the separate EFI page tables in mainline yet ] * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Fix boot crash by always mapping boot service regions into new EFI page tables x86/fpu: Fix eager-FPU handling on legacy FPU machines x86/delay: Avoid preemptible context checks in delay_mwaitx() x86/fpu: Revert ("x86/fpu: Disable AVX when eagerfpu is off") x86/fpu: Fix 'no387' regression
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target bug fix from Nicholas Bellinger: "Here is an outstanding target-core bug-fix for v4.5 code." This patch addresses a recent Task Management (TMR) regression related to larger set of multi-port LUN_RESET bug-fixes in v4.5-rc5. It drops a left-over target_put_sess_cmd() of se_cmd->cmd_kref within ABORT_TASK failure path, once a se_cmd descriptor has already completed posting response to fabric driver logic, and must be skipped during normal ABORT_TASK se_cmd->tag lookup" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Drop incorrect ABORT_TASK put for completed commands
-
- 12 Mar, 2016 3 commits
-
-
Ming Lei authored
For !BIO_CLONED bio, we can use .bi_vcnt safely, but it doesn't mean we can just simply return .bi_io_vec[.bi_vcnt - 1] because the start postion may have been moved in the middle of the bvec, such as splitting in the middle of bvec. Fixes: 7bcd79ac(block: bio: introduce helpers to get the 1st and last bvec) Cc: stable@vger.kernel.org Reported-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Matt Fleming authored
Some machines have EFI regions in page zero (physical address 0x00000000) and historically that region has been added to the e820 map via trim_bios_range(), and ultimately mapped into the kernel page tables. It was not mapped via efi_map_regions() as one would expect. Alexis reports that with the new separate EFI page tables some boot services regions, such as page zero, are not mapped. This triggers an oops during the SetVirtualAddressMap() runtime call. For the EFI boot services quirk on x86 we need to memblock_reserve() boot services regions until after SetVirtualAddressMap(). Doing that while respecting the ownership of regions that may have already been reserved by the kernel was the motivation behind this commit: 7d68dc3f ("x86, efi: Do not reserve boot services regions within reserved areas") That patch was merged at a time when the EFI runtime virtual mappings were inserted into the kernel page tables as described above, and the trick of setting ->numpages (and hence the region size) to zero to track regions that should not be freed in efi_free_boot_services() meant that we never mapped those regions in efi_map_regions(). Instead we were relying solely on the existing kernel mappings. Now that we have separate page tables we need to make sure the EFI boot services regions are mapped correctly, even if someone else has already called memblock_reserve(). Instead of stashing a tag in ->numpages, set the EFI_MEMORY_RUNTIME bit of ->attribute. Since it generally makes no sense to mark a boot services region as required at runtime, it's pretty much guaranteed the firmware will not have already set this bit. For the record, the specific circumstances under which Alexis triggered this bug was that an EFI runtime driver on his machine was responding to the EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event during SetVirtualAddressMap(). The event handler for this driver looks like this, sub rsp,0x28 lea rdx,[rip+0x2445] # 0xaa948720 mov ecx,0x4 call func_aa9447c0 ; call to ConvertPointer(4, & 0xaa948720) mov r11,QWORD PTR [rip+0x2434] # 0xaa948720 xor eax,eax mov BYTE PTR [r11+0x1],0x1 add rsp,0x28 ret Which is pretty typical code for an EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE handler. The "mov r11, QWORD PTR [rip+0x2424]" was the faulting instruction because ConvertPointer() was being called to convert the address 0x0000000000000000, which when converted is left unchanged and remains 0x0000000000000000. The output of the oops trace gave the impression of a standard NULL pointer dereference bug, but because we're accessing physical addresses during ConvertPointer(), it wasn't. EFI boot services code is stored at that address on Alexis' machine. Reported-by: Alexis Murzeau <amurzeau@gmail.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Raphael Hertzog <hertzog@debian.org> Cc: Roger Shimizu <rogershimizu@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1457695163-29632-2-git-send-email-matt@codeblueprint.co.uk Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=815125Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Borislav Petkov authored
i486 derived cores like Intel Quark support only the very old, legacy x87 FPU (FSAVE/FRSTOR, CPUID bit FXSR is not set), and our FPU code wasn't handling the saving and restoring there properly in the 'eagerfpu' case. So after we made eagerfpu the default for all CPU types: 58122bf1 x86/fpu: Default eagerfpu=on on all CPUs these old FPU designs broke. First, Andy Shevchenko reported a splat: WARNING: CPU: 0 PID: 823 at arch/x86/include/asm/fpu/internal.h:163 fpu__clear+0x8c/0x160 which was us trying to execute FXRSTOR on those machines even though they don't support it. After taking care of that, Bryan O'Donoghue reported that a simple FPU test still failed because we weren't initializing the FPU state properly on those machines. Take care of all that. Reported-and-tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yu-cheng <yu-cheng.yu@intel.com> Link: http://lkml.kernel.org/r/20160311113206.GD4312@pd.tnicSigned-off-by: Ingo Molnar <mingo@kernel.org>
-