This patch fixes the following kconfig error after changing
CONFIGFS_FS -> select SYSFS:

fs/sysfs/Kconfig:1:error: recursive dependency detected!
fs/sysfs/Kconfig:1:	symbol SYSFS is selected by CONFIGFS_FS
fs/configfs/Kconfig:1:	symbol CONFIGFS_FS is selected by NETCONSOLE_DYNAMIC
drivers/net/Kconfig:3390:	symbol NETCONSOLE_DYNAMIC depends on SYSFS
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: James Bottomley <James.Bottomley@suse.de>

This patch changes configfs to select SYSFS to fix the following:

warning: (TARGET_CORE && GFS2_FS) selects CONFIGFS_FS which has unmet direct dependencies (SYSFS)
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Acked-by: Joel Becker <jlbec@evilplan.org>

LIO target is a full featured in-kernel target framework with the
following feature set:

High-performance, non-blocking, multithreaded architecture with SIMD
support.

Advanced SCSI feature set:

    * Persistent Reservations (PRs)
    * Asymmetric Logical Unit Assignment (ALUA)
    * Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
    * Full Error Recovery (ERL=0,1,2)
    * Active/active task migration and session continuation (ERL=2)
    * Thin LUN provisioning (UNMAP and WRITE_SAMExx)

Multiprotocol target plugins

Storage media independence:

    * Virtualization of all storage media; transparent mapping of IO to LUNs
    * No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
    * Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.

Standards compliance:

    * Full compliance with IETF (RFC 3720)
    * Full implementation of SPC-4 PRs and ALUA

Significant code cleanups done by Christoph Hellwig.

[jejb: fix up for new block bdev exclusive interface. Minor fixes from
 Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

SDEV_MEDIA_CHANGE event was first added by commit a341cd0f (SCSI: add
asynchronous event notification API) for SATA AN support and then
extended to cover generic media change events by commit 285e9670
([SCSI] sr,sd: send media state change modification events).

This event was mapped to block device in userland with all properties
stripped to simulate CHANGE event on the block device, which, in turn,
was used to trigger further userspace action on media change.

The recent addition of disk event framework kept this event for
backward compatibility but it turns out to be unnecessary and causes
erratic and inefficient behavior.  The new disk event generates proper
events on the block devices and the compat events are mapped to block
device with all properties stripped, so the block device ends up
generating multiple duplicate events for single actual event.

This patch removes the compat event generation from both sr and sd as
suggested by Kay Sievers.  Both existing and newer versions of udev
and the associated tools will behave better with the removal of these
events as they from the beginning were expecting events on the block
devices.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

Replace sd_media_change() with sd_check_events().

* Move media removed logic into set_media_not_present() and
  media_not_present() and set sdev->changed iff an existing media is
  removed or the device indicates UNIT_ATTENTION.

* Make sd_check_events() sets sdev->changed if previously missing
  media becomes present.

* Event is reported only if sdev->changed is set.

This makes media presence event reported if scsi_disk->media_present
actually changed or the device indicated UNIT_ATTENTION.  For backward
compatibility, SDEV_EVT_MEDIA_CHANGE is generated each time
sd_check_events() detects media change event.

[jejb: fix boot failure]
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (59 commits)
  ACPI / PM: Fix build problems for !CONFIG_ACPI related to NVS rework
  ACPI: fix resource check message
  ACPI / Battery: Update information on info notification and resume
  ACPI: Drop device flag wake_capable
  ACPI: Always check if _PRW is present before trying to evaluate it
  ACPI / PM: Check status of power resources under mutexes
  ACPI / PM: Rename acpi_power_off_device()
  ACPI / PM: Drop acpi_power_nocheck
  ACPI / PM: Drop acpi_bus_get_power()
  Platform / x86: Make fujitsu_laptop use acpi_bus_update_power()
  ACPI / Fan: Rework the handling of power resources
  ACPI / PM: Register power resource devices as soon as they are needed
  ACPI / PM: Register acpi_power_driver early
  ACPI / PM: Add function for updating device power state consistently
  ACPI / PM: Add function for device power state initialization
  ACPI / PM: Introduce __acpi_bus_get_power()
  ACPI / PM: Introduce function for refcounting device power resources
  ACPI / PM: Add functions for manipulating lists of power resources
  ACPI / PM: Prevent acpi_power_get_inferred_state() from making changes
  ACPICA: Update version to 20101209
  ...

* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
  cpuidle/x86/perf: fix power:cpu_idle double end events and throw cpu_idle events from the cpuidle layer
  intel_idle: open broadcast clock event
  cpuidle: CPUIDLE_FLAG_CHECK_BM is omap3_idle specific
  cpuidle: CPUIDLE_FLAG_TLB_FLUSHED is specific to intel_idle
  cpuidle: delete unused CPUIDLE_FLAG_SHALLOW, BALANCED, DEEP definitions
  SH, cpuidle: delete use of NOP CPUIDLE_FLAGS_SHALLOW
  cpuidle: delete NOP CPUIDLE_FLAG_POLL
  ACPI: processor_idle: delete use of NOP CPUIDLE_FLAGs
  cpuidle: Rename X86 specific idle poll state[0] from C0 to POLL
  ACPI, intel_idle: Cleanup idle= internal variables
  cpuidle: Make cpuidle_enable_device() call poll_idle_init()
  intel_idle: update Sandy Bridge core C-state residency targets

* 'sfi-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6:
  SFI: use ioremap_cache() instead of ioremap()

Merge branch 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin

* 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin:
  fs: fix do_last error case when need_reval_dot
  nfs: add missing rcu-walk check
  fs: hlist UP debug fixup
  fs: fix dropping of rcu-walk from force_reval_path
  fs: force_reval_path drop rcu-walk before d_invalidate
  fs: small rcu-walk documentation fixes

Fixed up trivial conflicts in Documentation/filesystems/porting

When open(2) without O_DIRECTORY opens an existing dir, it should return
EISDIR. In do_last(), the variable 'error' is initialized EISDIR, but it
is changed by d_revalidate() which returns any positive to represent
'the target dir is valid.'

Should we keep and return the initialized 'error' in this case.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>

Signed-off-by: Nick Piggin <npiggin@kernel.dk>

* 'stable/gntdev' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/p2m: Fix module linking error.
  xen p2m: clear the old pte when adding a page to m2p_override
  xen gntdev: use gnttab_map_refs and gnttab_unmap_refs
  xen: introduce gnttab_map_refs and gnttab_unmap_refs
  xen p2m: transparently change the p2m mappings in the m2p override
  xen/gntdev: Fix circular locking dependency
  xen/gntdev: stop using "token" argument
  xen: gntdev: move use of GNTMAP_contains_pte next to the map_op
  xen: add m2p override mechanism
  xen: move p2m handling to separate file
  xen/gntdev: add VM_PFNMAP to vma
  xen/gntdev: allow usermode to map granted pages
  xen: define gnttab_set_map_op/unmap_op

Fix up trivial conflict in drivers/xen/Kconfig

Merge branch 'stable/platform-pci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

* 'stable/platform-pci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen-platform: Fix compile errors if CONFIG_PCI is not enabled.
  xen: rename platform-pci module to xen-platform-pci.
  xen-platform: use PCI interfaces to request IO and MEM resources.

Po-Yu Chuang <ratbert.chuang@gmail.com> noticed that hlist_bl_set_first could
crash on a UP system when LIST_BL_LOCKMASK is 0, because

	LIST_BL_BUG_ON(!((unsigned long)h->first & LIST_BL_LOCKMASK));

always evaulates to true.

Fix the expression, and also avoid a dependency between bit spinlock
implementation and list bl code (list code shouldn't know anything
except that bit 0 is set when adding and removing elements). Eventually
if a good use case comes up, we might use this list to store 1 or more
arbitrary bits of data, so it really shouldn't be tied to locking either,
but for now they are helpful for debugging.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>

As J. R. Okajima noted, force_reval_path passes in the same dentry to
d_revalidate as the one in the nameidata structure (other callers pass in a
child), so the locking breaks. This can oops with a chrooted nfs mount, for
example. Similarly there can be other problems with revalidating a dentry
which is already in nameidata of the path walk.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>

d_revalidate can return in rcu-walk mode even when it returns 0.  We can't just
call any old dcache function on rcu-walk dentry (the dentry is unstable, so
even through d_lock can safely be taken, the result may no longer be what we
expect -- careful re-checks would be required). So just drop rcu in this case.

(I missed this conversion when switching to the rcu-walk convention that Linus
suggested)
Signed-off-by: Nick Piggin <npiggin@kernel.dk>

Signed-off-by: Nick Piggin <npiggin@kernel.dk>

In the current implementation mem_cgroup_end_migration() decides whether
the page migration has succeeded or not by checking "oldpage->mapping".

But if we are tring to migrate a shmem swapcache, the page->mapping of it
is NULL from the begining, so the check would be invalid.  As a result,
mem_cgroup_end_migration() assumes the migration has succeeded even if
it's not, so "newpage" would be freed while it's not uncharged.

This patch fixes it by passing mem_cgroup_end_migration() the result of
the page migration.
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In mem_cgroup_alloc() we currently do either kmalloc() or vmalloc() then
followed by memset() to zero the memory.  This can be more efficiently
achieved by using kzalloc() and vzalloc().  There's also one situation
where we can use kzalloc_node() - this is what's new in this version of
the patch.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit b1dd693e ("memcg: avoid deadlock between move charge and
try_charge()") can cause another deadlock about mmap_sem on task migration
if cpuset and memcg are mounted onto the same mount point.

After the commit, cgroup_attach_task() has sequence like:

cgroup_attach_task()
  ss->can_attach()
    cpuset_can_attach()
    mem_cgroup_can_attach()
      down_read(&mmap_sem)        (1)
  ss->attach()
    cpuset_attach()
      mpol_rebind_mm()
        down_write(&mmap_sem)     (2)
        up_write(&mmap_sem)
      cpuset_migrate_mm()
        do_migrate_pages()
          down_read(&mmap_sem)
          up_read(&mmap_sem)
    mem_cgroup_move_task()
      mem_cgroup_clear_mc()
        up_read(&mmap_sem)

We can cause deadlock at (2) because we've already aquire the mmap_sem at (1).

But the commit itself is necessary to fix deadlocks which have existed
before the commit like:

Ex.1)
                move charge             |        try charge
  --------------------------------------+------------------------------
    mem_cgroup_can_attach()             |  down_write(&mmap_sem)
      mc.moving_task = current          |    ..
      mem_cgroup_precharge_mc()         |  __mem_cgroup_try_charge()
        mem_cgroup_count_precharge()    |    prepare_to_wait()
          down_read(&mmap_sem)          |    if (mc.moving_task)
          -> cannot aquire the lock     |    -> true
                                        |      schedule()
                                        |      -> move charge should wake it up

Ex.2)
                move charge             |        try charge
  --------------------------------------+------------------------------
    mem_cgroup_can_attach()             |
      mc.moving_task = current          |
      mem_cgroup_precharge_mc()         |
        mem_cgroup_count_precharge()    |
          down_read(&mmap_sem)          |
          ..                            |
          up_read(&mmap_sem)            |
                                        |  down_write(&mmap_sem)
    mem_cgroup_move_task()              |    ..
      mem_cgroup_move_charge()          |  __mem_cgroup_try_charge()
        down_read(&mmap_sem)            |    prepare_to_wait()
        -> cannot aquire the lock       |    if (mc.moving_task)
                                        |    -> true
                                        |      schedule()
                                        |      -> move charge should wake it up

This patch fixes all of these problems by:
1. revert the commit.
2. To fix the Ex.1, we set mc.moving_task after mem_cgroup_count_precharge()
   has released the mmap_sem.
3. To fix the Ex.2, we use down_read_trylock() instead of down_read() in
   mem_cgroup_move_charge() and, if it has failed to aquire the lock, cancel
   all extra charges, wake up all waiters, and retry trylock.
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reported-by: Ben Blum <bblum@andrew.cmu.edu>
Cc: Miao Xie <miaox@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Paul Menage <menage@google.com>
Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Adding the number of swap pages to the byte limit of a memory control
group makes no sense.  Convert the pages to bytes before adding them.

The only user of this code is the OOM killer, and the way it is used means
that the error results in a higher OOM badness value.  Since the cgroup
limit is the same for all tasks in the cgroup, the error should have no
practical impact at the moment.

But let's not wait for future or changing users to trip over it.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: David Rientjes <rientjes@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Introduce a new bit spin lock, PCG_MOVE_LOCK, to synchronize the page
accounting and migration code.  This reworks the locking scheme of
_update_stat() and _move_account() by adding new lock bit PCG_MOVE_LOCK,
which is always taken under IRQ disable.

1. If pages are being migrated from a memcg, then updates to that
   memcg page statistics are protected by grabbing PCG_MOVE_LOCK using
   move_lock_page_cgroup().  In an upcoming commit, memcg dirty page
   accounting will be updating memcg page accounting (specifically: num
   writeback pages) from IRQ context (softirq).  Avoid a deadlocking
   nested spin lock attempt by disabling irq on the local processor when
   grabbing the PCG_MOVE_LOCK.

2. lock for update_page_stat is used only for avoiding race with
   move_account().  So, IRQ awareness of lock_page_cgroup() itself is not
   a problem.  The problem is between mem_cgroup_update_page_stat() and
   mem_cgroup_move_account_page().

Trade-off:
  * Changing lock_page_cgroup() to always disable IRQ (or
    local_bh) has some impacts on performance and I think
    it's bad to disable IRQ when it's not necessary.
  * adding a new lock makes move_account() slower.  Score is
    here.

Performance Impact: moving a 8G anon process.

Before:
	real    0m0.792s
	user    0m0.000s
	sys     0m0.780s

After:
	real    0m0.854s
	user    0m0.000s
	sys     0m0.842s

This score is bad but planned patches for optimization can reduce
this impact.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Andrea Righi <arighi@develer.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Replace usage of the mem_cgroup_update_file_mapped() memcg
statistic update routine with two new routines:
* mem_cgroup_inc_page_stat()
* mem_cgroup_dec_page_stat()

As before, only the file_mapped statistic is managed.  However, these more
general interfaces allow for new statistics to be more easily added.  New
statistics are added with memcg dirty page accounting.
Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrea Righi <arighi@develer.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Document cgroup dirty memory interfaces and statistics.

[akpm@linux-foundation.org: fix use_hierarchy description]
Signed-off-by: Andrea Righi <arighi@develer.com>
Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patchset provides the ability for each cgroup to have independent
dirty page limits.

Limiting dirty memory is like fixing the max amount of dirty (hard to
reclaim) page cache used by a cgroup.  So, in case of multiple cgroup
writers, they will not be able to consume more than their designated share
of dirty pages and will be forced to perform write-out if they cross that
limit.

The patches are based on a series proposed by Andrea Righi in Mar 2010.

Overview:

- Add page_cgroup flags to record when pages are dirty, in writeback, or nfs
  unstable.

- Extend mem_cgroup to record the total number of pages in each of the
  interesting dirty states (dirty, writeback, unstable_nfs).

- Add dirty parameters similar to the system-wide  /proc/sys/vm/dirty_*
  limits to mem_cgroup.  The mem_cgroup dirty parameters are accessible
  via cgroupfs control files.

- Consider both system and per-memcg dirty limits in page writeback when
  deciding to queue background writeback or block for foreground writeback.

Known shortcomings:

- When a cgroup dirty limit is exceeded, then bdi writeback is employed to
  writeback dirty inodes.  Bdi writeback considers inodes from any cgroup, not
  just inodes contributing dirty pages to the cgroup exceeding its limit.

- When memory.use_hierarchy is set, then dirty limits are disabled.  This is a
  implementation detail.  An enhanced implementation is needed to check the
  chain of parents to ensure that no dirty limit is exceeded.

Performance data:
- A page fault microbenchmark workload was used to measure performance, which
  can be called in read or write mode:
        f = open(foo. $cpu)
        truncate(f, 4096)
        alarm(60)
        while (1) {
                p = mmap(f, 4096)
                if (write)
			*p = 1
		else
			x = *p
                munmap(p)
        }

- The workload was called for several points in the patch series in different
  modes:
  - s_read is a single threaded reader
  - s_write is a single threaded writer
  - p_read is a 16 thread reader, each operating on a different file
  - p_write is a 16 thread writer, each operating on a different file

- Measurements were collected on a 16 core non-numa system using "perf stat
  --repeat 3".  The -a option was used for parallel (p_*) runs.

- All numbers are page fault rate (M/sec).  Higher is better.

- To compare the performance of a kernel without non-memcg compare the first and
  last rows, neither has memcg configured.  The first row does not include any
  of these memcg patches.

- To compare the performance of using memcg dirty limits, compare the baseline
  (2nd row titled "w/ memcg") with the the code and memcg enabled (2nd to last
  row titled "all patches").

                           root_cgroup                    child_cgroup
                 s_read s_write p_read p_write   s_read s_write p_read p_write
mmotm w/o memcg   0.428  0.390   0.429  0.388
mmotm w/ memcg    0.411  0.378   0.391  0.362     0.412  0.377   0.385  0.363
all patches       0.384  0.360   0.370  0.348     0.381  0.363   0.368  0.347
all patches       0.431  0.402   0.427  0.395
  w/o memcg

This patch:

Add additional flags to page_cgroup to track dirty pages within a
mem_cgroup.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrea Righi <arighi@develer.com>
Signed-off-by: Greg Thelen <gthelen@google.com>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The zone->lru_lock is heavily contented in workload where activate_page()
is frequently used.  We could do batch activate_page() to reduce the lock
contention.  The batched pages will be added into zone list when the pool
is full or page reclaim is trying to drain them.

For example, in a 4 socket 64 CPU system, create a sparse file and 64
processes, processes shared map to the file.  Each process read access the
whole file and then exit.  The process exit will do unmap_vmas() and cause
a lot of activate_page() call.  In such workload, we saw about 58% total
time reduction with below patch.  Other workloads with a lot of
activate_page also benefits a lot too.

I tested some microbenchmarks:
case-anon-cow-rand-mt		0.58%
case-anon-cow-rand		-3.30%
case-anon-cow-seq-mt		-0.51%
case-anon-cow-seq		-5.68%
case-anon-r-rand-mt		0.23%
case-anon-r-rand		0.81%
case-anon-r-seq-mt		-0.71%
case-anon-r-seq			-1.99%
case-anon-rx-rand-mt		2.11%
case-anon-rx-seq-mt		3.46%
case-anon-w-rand-mt		-0.03%
case-anon-w-rand		-0.50%
case-anon-w-seq-mt		-1.08%
case-anon-w-seq			-0.12%
case-anon-wx-rand-mt		-5.02%
case-anon-wx-seq-mt		-1.43%
case-fork			1.65%
case-fork-sleep			-0.07%
case-fork-withmem		1.39%
case-hugetlb			-0.59%
case-lru-file-mmap-read-mt	-0.54%
case-lru-file-mmap-read		0.61%
case-lru-file-mmap-read-rand	-2.24%
case-lru-file-readonce		-0.64%
case-lru-file-readtwice		-11.69%
case-lru-memcg			-1.35%
case-mmap-pread-rand-mt		1.88%
case-mmap-pread-rand		-15.26%
case-mmap-pread-seq-mt		0.89%
case-mmap-pread-seq		-69.72%
case-mmap-xread-rand-mt		0.71%
case-mmap-xread-seq-mt		0.38%

The most significent are:
case-lru-file-readtwice		-11.69%
case-mmap-pread-rand		-15.26%
case-mmap-pread-seq		-69.72%

which use activate_page a lot.  others are basically variations because
each run has slightly difference.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Clean up code and remove duplicate code.  Next patch will use
pagevec_lru_move_fn introduced here too.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It's old-fashioned and unneeded.

akpm:/usr/src/25> size mm/page_alloc.o
   text    data     bss     dec     hex filename
  39884 1241317   18808 1300009  13d629 mm/page_alloc.o (before)
  39838 1241317   18808 1299963  13d5fb mm/page_alloc.o (after)
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2.6.37 added an unmap_and_move_huge_page() for memory failure recovery,
but its anon_vma handling was still based around the 2.6.35 conventions.
Update it to use page_lock_anon_vma, get_anon_vma, page_unlock_anon_vma,
drop_anon_vma in the same way as we're now changing unmap_and_move().

I don't particularly like to propose this for stable when I've not seen
its problems in practice nor tested the solution: but it's clearly out of
synch at present.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Jun'ichi Nomura" <j-nomura@ce.jp.nec.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: <stable@kernel.org> [2.6.37, 2.6.36]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Increased usage of page migration in mmotm reveals that the anon_vma
locking in unmap_and_move() has been deficient since 2.6.36 (or even
earlier).  Review at the time of f1819427
("mm: fix hang on anon_vma->root->lock") missed the issue here: the
anon_vma to which we get a reference may already have been freed back to
its slab (it is in use when we check page_mapped, but that can change),
and so its anon_vma->root may be switched at any moment by reuse in
anon_vma_prepare.

Perhaps we could fix that with a get_anon_vma_unless_zero(), but let's
not: just rely on page_lock_anon_vma() to do all the hard thinking for us,
then we don't need any rcu read locking over here.

In removing the rcu_unlock label: since PageAnon is a bit in
page->mapping, it's impossible for a !page->mapping page to be anon; but
insert VM_BUG_ON in case the implementation ever changes.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Jun'ichi Nomura" <j-nomura@ce.jp.nec.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: <stable@kernel.org> [2.6.37, 2.6.36]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It was hard to explain the page counts which were causing new LTP tests
of KSM to fail: we need to drain the per-cpu pagevecs to LRU occasionally.
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: CAI Qian <caiqian@redhat.com>
Cc:Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When parsing changes to the huge page pool sizes made from userspace via
the sysfs interface, bogus input values are being covered up by
nr_hugepages_store_common and nr_overcommit_hugepages_store returning 0
when strict_strtoul returns an error.  This can cause an infinite loop in
the nr_hugepages_store code.  This patch changes the return value for
these functions to -EINVAL when strict_strtoul returns an error.
Signed-off-by: Eric B Munson <emunson@mgebm.net>
Reported-by: CAI Qian <caiqian@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Huge pages with order >= MAX_ORDER must be allocated at boot via the
kernel command line, they cannot be allocated or freed once the kernel is
up and running.  Currently we allow values to be written to the sysfs and
sysctl files controling pool size for these huge page sizes.  This patch
makes the store functions for nr_hugepages and nr_overcommit_hugepages
return -EINVAL when the pool for a page size >= MAX_ORDER is changed.

[akpm@linux-foundation.org: avoid multiple return paths in nr_hugepages_store_common()]
[caiqian@redhat.com: add checking in hugetlb_overcommit_handler()]
Signed-off-by: Eric B Munson <emunson@mgebm.net>
Reported-by: CAI Qian <caiqian@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc_doulongvec_minmax may fail if the given buffer doesn't represent a
valid number.  If we provide something invalid we will initialize the
resulting value (nr_overcommit_huge_pages in this case) to a random value
from the stack.

The issue was introduced by a3d0c6aa when the default handler has been
replaced by the helper function where we do not check the return value.

Reproducer:
echo "" > /proc/sys/vm/nr_overcommit_hugepages

[akpm@linux-foundation.org: correctly propagate proc_doulongvec_minmax return code]
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Cc: CAI Qian <caiqian@redhat.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The sync_inodes_sb() function does not have a return value.  Remove the
outdated documentation comment.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

As it stands this code will degenerate into a busy-wait if the calling task
has signal_pending().

Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dma_pool_free() scans for the page to free in the pool list holding the
pool lock.  Then it releases the lock basically to acquire it immediately
again.  Modify the code to only take the lock once.

This will do some additional loops and computations with the lock held in
if memory debugging is activated.  If it is not activated the only new
operations with this lock is one if and one substraction.
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The previous approach of calucation of combined index was

	page_idx & ~(1 << order))

but we have same result with

	page_idx & buddy_idx

This reduces instructions slightly as well as enhances readability.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix used-unintialised warning]
Signed-off-by: KyongHo Cho <pullip.cho@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>