there was an uneeded packed attribute for a data structure.
Signed-off-by: Oliver Neukum <oliver@neukum.name>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

kaweth used its own synchronisation superseded by usb_unlink_urb().
Signed-off-by: Oliver Neukum <oliver@neukum.name>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This tweaks the USB input driver support, notably fixing a botched
dependency that makes all the USB drivers appear strangely in Kconfig.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

The following compile error seems to come from Linus' tree:


<--  snip  -->

...
  CC      drivers/usb/serial/bus.o
  CC      drivers/usb/serial/console.o
drivers/usb/serial/console.c: In function `usb_console_write':
drivers/usb/serial/console.c:221: warning: passing arg 3 of pointer to function makes integer from pointer without a cast
drivers/usb/serial/console.c:221: error: too many arguments to function
drivers/usb/serial/console.c:223: warning: passing arg 3 of `usb_serial_generic_write' makes integer from pointer without a cast
drivers/usb/serial/console.c:223: error: too many arguments to function `usb_serial_generic_write'
make[3]: *** [drivers/usb/serial/console.o] Error 1

<--  snip  -->


This was caused by the changed "write" in usb_serial_device_type.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This patch implements the Windows scheme for USB device initialization.
It also incorporates the change recently posted by David to scrub the
endpoint state following a SET-ADDRESS.  Other noteworthy changes:

	There are two new module parameters to control whether the
	old scheme or the new one is used first and whether the other
	scheme is tried if the first one fails.  Default settings are
	to use the new scheme only.

	hub_set_address() returns 0 immediately if the device is already
	in the USB_STATE_ADDRESS state.

	On the first attempt to read the device descriptor the code
	uses a short 1-second timeout.  This ought to help prevent
	full-speed devices with an 8- or 16-byte maxpacket from
	slowing the procedure down by NAKing the unexpectedly early
	status stage of the transfer.

	For debugging, the ep0 maxpacket value is printed.  It might
	be a good idea to validate it rather than just believing the
	device -- although I haven't heard of any device providing
	an incorrect value other than 0.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Description: Use msleep_interruptible() instead of schedule_timeout()
so that the task delays as expected.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Maximilian Attems <janitor@sternwelten.at>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Description: Use msleep_interruptible() instead of schedule_timeout() to
guarantee the task delays as expected.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Maximilian Attems <janitor@sternwelten.at>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This patch adds the __le16 data types to the file-storage gadget and
removes some erroneous conversions to little-endian order.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Fix some compiler warnings that came up with net2280 on processors with
64bit dma_addr-t ... one of them would have been a bug on big-endian CPUs.
(Thanks to Randy Dunlap for reporting these.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This is a collection of updates to the OMAP UDC driver.

  - OMAP-1510 support, including DMA (the DMA controller isn't quite
    the same as on newer chips) but not double buffering.

  - Some PIO work:

      * fix some races that showed up on OMAP-1510

      * tracking down annoying PIO-OUT lossage and making double buffering
        start to behave (needed as fallback if all DMA channels are in use).

  - DMA-IN works on both 1510 and 16xx

Plus minor cleanups.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This patch provides a way to work around especially broken BIOS/SMM
implementations which claim they support the OS-handoff handshake
but actually don't.  It's confirmed that this resolves some OSDL bug
(ID isn't handy just now).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This has various updates to the USB error code documentation that I've
had floating around.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This updates the dependencies of the HCDs and host-side USB so that:

 - Options for PCI-only HCDs (UHCI and, for now, EHCI) only appear
   systems that actually have PCI.

 - Adding non-PCI bus glue support for another OHCI adapter doesn't
   need involve changing the main USB Kconfig anymore.

 - Minor tweaks to the OMAP support, so OMAP 17xx and 24xx don't need
   additional Kconfig changes and so the H3/17xx gets the ISP1301 too.

This still tries to hide host-side USB config options on systems that
don't offer USB.  While currently convenient, that's a losing proposition
in the long term:  host controllers on chips like SL811 and TD243 can be
put onto any custom board.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This is a bunch of "sparse" fixes for goku_udc.  One of these might be
an issue on some systems for code that explicitly halts IN endpoints
(like file_storage) if normal memory access doesn't work for PCI.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

into kroah.com:/home/greg/linux/BK/usb-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Use %p to print a pointer, so that its length doesn't matter
and so that gcc won't complain.

drivers/mtd/maps/dilnetpc.c:416: warning: long unsigned int format, pointer arg (arg 2)
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

I reviewed, patched, and tested ppp_async.c to implement
ldisc->hangup().  This correctly terminates the PPP connection on
hangup.

Paul Mackerras already did an excellent job of ensuring safe shutdown
and I/O completion in ldisc->close so the change is trivial: just add
the ldisc->hangup and call the existing close routine.

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Below is a patch from Denis Zaitsev <zzz@anda.ru> with the following two
adjustments:

- applies with -p1 (not -p0)

- USRobotics -> U.S. Robotics (consistent with the rest of the entries)
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The MIPS Makefile was changed so that the offset of data section may not be
dependent on a specific machine header file.
Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

One more place in fs/proc/array.c where ppid is wrong, which I missed in my
previous mail to lkml.
Signed-off-by: Dinakar Guniguntala <dino@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: <Urban.Widmark@enlight.net>

The memset is because it was previously possible to send always the same CIFS
fragment and use this to increase the data counters.  When the data counter
"exceeds" the amount of bytes expected this will return the buffer only
partially initialised...  With findfirst etc requests this should allow
leaking kernel memory content.

The other thing is that the data is only returned when data_tot and parm_tot
both "exceed" the expected values.  Previously it was possible to create a
sequence of CIFS fragments that allowed exceeding the counters.  The calling
functions then would believe they received a number of bytes that does not fit
into the allocated buffer.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

When a system has a very large imbalance of overall memory size to
ZONE_NORMAL (for example when large amounts of numa remap space are in use)
page_writeback_init() may incorrectly set vm_dirty_ratio and
dirty_background_ratio to zero; leading to divide by zero errors elsewhere.
This patch bounds these at 1%.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Error: ./drivers/media/video/cx88/cx88-video.o .data refers to 0000000000000b28 R_X86_64_64       .exit.text
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Error: ./drivers/media/dvb/bt8xx/bt878.o .data refers to 0000000000000048 R_X86_64_64       .exit.text
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Error: ./drivers/media/video/saa7134/saa7134-core.o .data refers to 0000000000000028 R_X86_64_64       .exit.text
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Here is a patch for M32R SIO driver, which replaces deprecated 
MODULE_PARAM() with modern module_param().

	* drivers/serial/m32r_sio.c:
	- Replace MODULE_PARAM() with module_param().
	- Fix a typo: UARRT_RSA_BASE --> UART_RSA_BASE.
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

In ia32 emulation, the amd64 kernel refuses the ioctls TIOCSBRK and
TIOCCBRK with EINVAL.  I've attached a patch that adds them to the
compatibility list.

Since all architectures have these ioctls ("m68knommu" inherits them from
"m68k", "um" from its host) and use the same code, I think adding them to
compat_ioctl.h is the correct choice (as opposed to adding them to
arch/x86_64/ia32/ia32_ioctl.c).
Signed-off-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

There seems to have been a couple of thinkos in the NUMA init code, in
particular in find_cpu_node():

* Property size returned is in bytes, not words
* Off-by-one error in loop iteration
Signed-off-by: Nathan Lynch <nathanl@austin.ibm.com>
Signed-off-by: Olof Johansson <olof@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

When the generic IRQ patch went in, it changed the behaviour of setup_irq
(compared to the previous ppc64 version) in that we now don't call the
handler's enable function if it has a startup function.  The XICS interrupt
controller has a startup function, and so we weren't getting any interrupts
through the XICS because they never got enabled.  This patch adds a call to
xics_enable_irq to xics_startup and fixes the problem.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

One of the iSeries specific files used HZ without including linux/param.h
and previously got away with it.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix ibm44x_common.c compile.
Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Recent changes to arch/ppc/boot/lib/Makefile cause

      CC      arch/ppc/boot/lib/../../../../lib/zlib_inflate/infblock.o
    Assembler messages:
    FATAL: can't create arch/ppc/boot/lib/../../../../lib/zlib_inflate/infblock.o: No such file or directory

when building a ppc kernel using O=$(output_dir) with CONFIG_ZLIB_INFLATE=n,
because the $(output_dir)/lib/zlib_inflate directory doesn't get created.

This patch, which makes arch/ppc/boot/lib/Makefile create the
directory if needed, is one fix for the problem.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch removes the bogus workaround for dcache prefetch beyond the end
of the physical memory.
Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Instead, tty_io.c will always copy user space data to
kernel space, leaving the drivers to worry only about
normal kernel buffers.

No more "from_user" flag, and having the user copy in
each driver.

This cleans up the code and also fixes a number of
locking bugs.

 - Reduce memory use by merging adjacent obsolete raw_node_refs
 - Error handling fixes
 - Respect kmalloc size limit in scan
 - NAND ECC updates
Signed-Off-By: David Woodhouse <dwmw2@infradead.org>

 - Use new RS library for ECC
 - Add support for new NAND flash chips
 - New board support:
   - iPAQ H1910
   - Renesas AG-AND devel board
   - Simtec S3C210 
 - Support for shared controllers on multiple chips.
Signed-Off-By: Thomas Gleixner <tglx@linutronix.de>
Signed-Off-By: David Woodhouse <dwmw2@infradead.org>

Signed-Off-By: David Woodhouse <dwmw2@infradead.org>