- 19 Feb, 2013 21 commits
-
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
- 18 Feb, 2013 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input subsystem fixes from Dmitry Torokhov: "Two small driver fixups and a documentation update for managed input devices" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - fix wacom_set_report retry logic Input: document that unregistering managed devices is not necessary Input: lm8323 - fix checking PWM interrupt status
-
Linus Torvalds authored
Commit c060f943 ("mm: use aligned zone start for pfn_to_bitidx calculation") fixed out calculation of the index into the pageblock bitmap when a !SPARSEMEM zome was not aligned to pageblock_nr_pages. However, the _allocation_ of that bitmap had never taken this alignment requirement into accout, so depending on the exact size and alignment of the zone, the use of that index could then access past the allocation, resulting in some very subtle memory corruption. This was reported (and bisected) by Ingo Molnar: one of his random config builds would hang with certain very specific kernel command line options. In the meantime, commit c060f943 has been marked for stable, so this fix needs to be back-ported to the stable kernels that backported the commit to use the right alignment. Bisected-and-tested-by: Ingo Molnar <mingo@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 15 Feb, 2013 9 commits
-
-
Linus Torvalds authored
Merge tag 'stable/for-linus-3.8-rc7-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull xen fixes from Konrad Rzeszutek Wilk: "Two fixes: - A simple bug-fix for redundant NULL check. - CVE-2013-0228/XSA-42: x86/xen: don't assume %ds is usable in xen_iret for 32-bit PVOPS and two reverts: - Revert the PVonHVM kexec. The patch introduces a regression with older hypervisor stacks, such as Xen 4.1." * tag 'stable/for-linus-3.8-rc7-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: Revert "xen PVonHVM: use E820_Reserved area for shared_info" Revert "xen/PVonHVM: fix compile warning in init_hvm_pv_info" xen: remove redundant NULL check before unregister_and_remove_pcpu(). x86/xen: don't assume %ds is usable in xen_iret for 32-bit PVOPS.
-
Mauro Carvalho Chehab authored
As reported by Klaus Schmidinger: "In VDR I use an ioctl() call with FE_READ_UNCORRECTED_BLOCKS on a device (using stb0899). After this call I check 'errno' for EOPNOTSUPP to determine whether this device supports this call. This used to work just fine, until a few months ago I noticed that my devices using stb0899 didn't display their signal quality in VDR's OSD any more. After further investigation I found that ioctl(FE_READ_UNCORRECTED_BLOCKS) no longer returns EOPNOTSUPP, but rather ENOTTY. And since I stop getting the signal quality in case any unknown errno value appears, this broke my signal quality query function." While the changes reflect what is there at: http://comments.gmane.org/gmane.linux.kernel/1235728 it does cause regression on userspace. So, revert it to stop the damage. This reverts commit 177ffe50 ("[media] dvb_frontend: return -ENOTTY for unimplement IOCTL"). Reported-by: Klaus Schmidinger <Klaus.Schmidinger@tvdr.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc fixes from David Miller: "A couple small fixes for sparc including some THP brown-paper-bag material: 1) During the merging of all the THP support for various architectures, sparc missed adding a HAVE_ARCH_TRANSPARENT_HUGEPAGE to it's Kconfig, oops. 2) Sparc needs to be mindful of hugepages in get_user_pages_fast(). 3) Fix memory leak in SBUS probe, from Cong Ding. 4) The sunvdc virtual disk client driver has a test of the bitmask of vdisk server supported operations which was off by one bit" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sunvdc: Fix off-by-one in generic_request(). sparc64: Fix get_user_pages_fast() wrt. THP. sparc64: Add missing HAVE_ARCH_TRANSPARENT_HUGEPAGE. sparc: kernel/sbus.c: fix memory leakage
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull one more x86 fix from Peter Anvin: "Sigh. One more patch in the "please don't brick my Samsung" series" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Clear EFI_RUNTIME_SERVICES rather than EFI_BOOT by "noefi" boot parameter
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fix from Bjorn Helgaas: "This is another fix for v3.8. It fixes an oops that happens when a Thunderbolt adapter is unplugged (remove device, poll for PME events on no-longer-existing device, oops)." * tag '3.8-pci-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/PM: Clean up PME state when removing a device
-
git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds authored
Pull omapdss fixes from Tomi Valkeinen: "It'd be great if these two late fixes would still make it into 3.8. The other one fixes ARM kernel compilation when using 'allyesconfig', and the other makes DPI displays function again on OMAP3630 boards: - Fix ARM compilation with "allyesconfig" (omapdrm: fix the dependency to omapdss) - fix DPI displays on OMAP3630 (OMAPDSS: add FEAT_DPI_USES_VDDS_DSI to omap3630_dss_feat_list)" * tag 'omapdss-for-3.8-rc8' of git://gitorious.org/linux-omap-dss2/linux: omapdrm: fix the dependency to omapdss OMAPDSS: add FEAT_DPI_USES_VDDS_DSI to omap3630_dss_feat_list
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c maintainer info update from Wolfram Sang: "Since my old email and repos are not working anymore, and this already caused some confusion, I think a MAINTAINERS update for 3.8 is helpful. So, people trying I2C with the new kernel can properly reach me and find my repos." * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: change my email and repos
-
Konrad Rzeszutek Wilk authored
This reverts commit 9d02b43d. We are doing this b/c on 32-bit PVonHVM with older hypervisors (Xen 4.1) it ends up bothing up the start_info. This is bad b/c we use it for the time keeping, and the timekeeping code loops forever - as the version field never changes. Olaf says to revert it, so lets do that. Acked-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Konrad Rzeszutek Wilk authored
This reverts commit a7be94ac. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 14 Feb, 2013 7 commits
-
-
David S. Miller authored
The 'operations' bitmap corresponds one-for-one with the operation codes, no adjustment is necessary. Reported-by: Mark Kettenis <mark.kettenis@xs4all.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russ Dill authored
commit dd8004af: 'regulator: core: Log when a device causes a voltage constraint fail', tried to print out some information about the check consumer min/max uV fixup, however, it uses a garbage pointer left over from list_for_each_entry leading to boot messages in the form: '[ 2.079890] <RANDOM ASCII>: Restricting voltage, 3735899821-4294967295uV' Because it references regulator->dev, it could potentially read memory from anywhere causing a panic. This patch instead uses rdev and the updated min/max uV values. Signed-off-by: Russ Dill <Russ.Dill@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Linux 3.8-rc7
-
Thiago Farina authored
Signed-off-by: Thiago Farina <tfarina@chromium.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Tomi Valkeinen authored
omapdrm uses "select" in Kconfig to enable omapdss. This doesn't work correctly, as "select" forces omapdss to be enabled in the config even if it normally could not be enabled because of missing Kconfig dependencies. This causes a build break on ARM, when using allyesconfig: drivers/video/omap2/dss/dss.c: In function 'dss_calc_clock_div': drivers/video/omap2/dss/dss.c:572:20: error: 'CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK' undeclared (first use in this function) drivers/video/omap2/dss/dss.c:572:20: note: each undeclared identifier is reported only once for each function it appears in Instead of using select, this patch changes omapdrm to use "depend on". Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
NeilBrown authored
commit 195e672a OMAPDSS: DPI: Remove cpu_is_xxxx checks made the mistake of assuming that cpu_is_omap34xx() is exclusive of other cpu_is_* predicates whereas it includes cpu_is_omap3630(). So on an omap3630, code that was previously enabled by if (cpu_is_omap34xx()) is now disabled as dss_has_feature(FEAT_DPI_USES_VDDS_DSI) fails. So add FEAT_DPI_USES_VDDS_DSI to omap3630_dss_feat_list. Cc: Chandrabhanu Mahapatra <cmahapatra@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
-
Satoru Takeuchi authored
There was a serious problem in samsung-laptop that its platform driver is designed to run under BIOS and running under EFI can cause the machine to become bricked or can cause Machine Check Exceptions. Discussion about this problem: https://bugs.launchpad.net/ubuntu-cdimage/+bug/1040557 https://bugzilla.kernel.org/show_bug.cgi?id=47121 The patches to fix this problem: efi: Make 'efi_enabled' a function to query EFI facilities 83e68189 samsung-laptop: Disable on EFI hardware e0094244 Unfortunately this problem comes back again if users specify "noefi" option. This parameter clears EFI_BOOT and that driver continues to run even if running under EFI. Refer to the document, this parameter should clear EFI_RUNTIME_SERVICES instead. Documentation/kernel-parameters.txt: =============================================================================== ... noefi [X86] Disable EFI runtime services support. ... =============================================================================== Documentation/x86/x86_64/uefi.txt: =============================================================================== ... - If some or all EFI runtime services don't work, you can try following kernel command line parameters to turn off some or all EFI runtime services. noefi turn off all EFI runtime services ... =============================================================================== Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Link: http://lkml.kernel.org/r/511C2C04.2070108@jp.fujitsu.com Cc: Matt Fleming <matt.fleming@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
-