- 15 Mar, 2019 11 commits
-
-
Lucas De Marchi authored
This is only used in intel_display() and shouldn't be needed there. We don't want to keep converting from pll id to pll type so just remove the function. Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190309035727.25389-6-lucas.demarchi@intel.com
-
Lucas De Marchi authored
Like was done for MG and combo, now finish the per-type split of the vfunc by moving TBT out of the combo functions. Now we can completely remove icl_pll_id_to_enable_reg() since each PLL type passes all the information via arguments. Signed-off-by:
-
Lucas De Marchi authored
Like was done in the enable case, split the implementation of the disable for MG and Combo PLLs. Signed-off-by:
-
Lucas De Marchi authored
Create separate functions to 1) enable power, 2) write pll config, and 3) enable pll. Doing this it makes it easier to share the functions for the different PLL types by passing the right arguments. Signed-off-by:
-
Lucas De Marchi authored
Let's start using the vfuncs to differentiate MG and Combo PLLs. The end goal is to decouple the type of the PLL from the IDs since the latter are likely to change from one platform to another. This also makes the code easier to read by not having lots of if/else chains on leaf functions. Signed-off-by:
-
Chris Wilson authored
With direct submission being disabled while the reset in progress, we have a small window where we may forgo the submission of a new request and not notice its addition during execlists_reset_finish. To close this window, always schedule the submission tasklet on coming out of reset to catch any residual work. <6> [333.144082] i915: Running intel_hangcheck_live_selftests/igt_reset_engines <3> [333.296927] i915_reset_engine(rcs0:idle): failed to idle after reset <6> [333.296932] i915 0000:00:02.0: [drm] rcs0 <6> [333.296934] i915 0000:00:02.0: [drm] Hangcheck 0:a9ddf7a5 [4157 ms] <6> [333.296936] i915 0000:00:02.0: [drm] Reset count: 36048 (global 754) <6> [333.296938] i915 0000:00:02.0: [drm] Requests: <6> [333.296997] i915 0000:00:02.0: [drm] RING_START: 0x00000000 <6> [333.296999] i915 0000:00:02.0: [drm] RING_HEAD: 0x00000000 <6> [333.297001] i915 0000:00:02.0: [drm] RING_TAIL: 0x00000000 <6> [333.297003] i915 0000:00:02.0: [drm] RING_CTL: 0x00000000 <6> [333.297005] i915 0000:00:02.0: [drm] RING_MODE: 0x00000200 [idle] <6> [333.297007] i915 0000:00:02.0: [drm] RING_IMR: fffffeff <6> [333.297010] i915 0000:00:02.0: [drm] ACTHD: 0x00000000_00000000 <6> [333.297012] i915 0000:00:02.0: [drm] BBADDR: 0x00000000_00000000 <6> [333.297015] i915 0000:00:02.0: [drm] DMA_FADDR: 0x00000000_00000000 <6> [333.297017] i915 0000:00:02.0: [drm] IPEIR: 0x00000000 <6> [333.297019] i915 0000:00:02.0: [drm] IPEHR: 0x00000000 <6> [333.297021] i915 0000:00:02.0: [drm] Execlist status: 0x00000001 00000000 <6> [333.297023] i915 0000:00:02.0: [drm] Execlist CSB read 5, write 5 [mmio:7], tasklet queued? no (enabled) <6> [333.297025] i915 0000:00:02.0: [drm] ELSP[0] idle <6> [333.297027] i915 0000:00:02.0: [drm] ELSP[1] idle <6> [333.297028] i915 0000:00:02.0: [drm] HW active? 0x0 <6> [333.297044] i915 0000:00:02.0: [drm] Queue priority hint: -8186 <6> [333.297067] i915 0000:00:02.0: [drm] Q 2afac:5f2+ prio=-8186 @ 50ms: (null) <6> [333.297068] i915 0000:00:02.0: [drm] HWSP: <6> [333.297071] i915 0000:00:02.0: [drm] [0000] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <6> [333.297073] i915 0000:00:02.0: [drm] * <6> [333.297075] i915 0000:00:02.0: [drm] [0040] 00000001 00000000 00000018 00000002 00000001 00000000 00000018 00000000 <6> [333.297077] i915 0000:00:02.0: [drm] [0060] 00000001 00000000 00008002 00000002 00000000 00000000 00000000 00000005 <6> [333.297079] i915 0000:00:02.0: [drm] [0080] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <6> [333.297081] i915 0000:00:02.0: [drm] * <6> [333.297083] i915 0000:00:02.0: [drm] [00c0] 00000000 00000000 00000000 00000000 a9ddf7a5 00000000 00000000 00000000 <6> [333.297085] i915 0000:00:02.0: [drm] [00e0] 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 <6> [333.297087] i915 0000:00:02.0: [drm] * <6> [333.297089] i915 0000:00:02.0: [drm] Idle? no <6> [333.297090] i915_reset_engine(rcs0:idle): 3000 resets <3> [333.297092] i915/intel_hangcheck_live_selftests: igt_reset_engines failed with error -5 <3> [333.455460] i915 0000:00:02.0: Failed to idle engines, declaring wedged! ... <0> [333.491294] i915_sel-4916 1.... 333262143us : i915_reset_engine: rcs0 flags=4 <0> [333.491328] i915_sel-4916 1.... 333262143us : execlists_reset_prepare: rcs0: depth<-0 <0> [333.491362] i915_sel-4916 1.... 333262143us : intel_engine_stop_cs: rcs0 <0> [333.491396] i915_sel-4916 1d..1 333262144us : process_csb: rcs0 cs-irq head=5, tail=5 <0> [333.491424] i915_sel-4916 1.... 333262145us : intel_gpu_reset: engine_mask=1 <0> [333.491454] kworker/-214 5.... 333262184us : i915_gem_switch_to_kernel_context: awake?=yes <0> [333.491487] kworker/-214 5.... 333262192us : i915_request_add: rcs0 fence 2afac:1522 <0> [333.491520] kworker/-214 5.... 333262193us : i915_request_add: marking (null) as active <0> [333.491553] i915_sel-4916 1.... 333262199us : intel_engine_cancel_stop_cs: rcs0 <0> [333.491587] i915_sel-4916 1.... 333262199us : execlists_reset_finish: rcs0: depth->0 Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190313162835.30228-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
The basic setup of the i915_hw_ppgtt is the same between gen6 and gen8, so refactor that into a common routine. Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190314223839.28258-5-chris@chris-wilson.co.uk
-
Chris Wilson authored
Large ppGTT are differentiated by the requirement to go to four levels to address more than 32b. Given the introduction of more 4 level ppGTT with different sizes of addressable bits, rename i915_vm_is_48b() to better reflect the commonality of using 4 levels. Based on a patch by Bob Paauwe. Signed-off-by:
-
Chris Wilson authored
With the introduction of the separate addressable bits into the device info, we can remove the conflation of the ppgtt size from the ppgtt type. Based on a patch by Bob Paauwe. Signed-off-by:
-
Chris Wilson authored
As the maximum addressable bits is determined by platform, record that information in our static chipset tables. This has the advantage of being clearly recorded in our capability dumps for dmesg, debugfs and error states. Based on a patch by Bob Paauwe. Signed-off-by:
-
Chris Wilson authored
For compatibility reasons, we only care if the vGPU host provides support for full-ppgtt. This is independent of the addressable memory size, so remove the conflation of 48b from the capability name. Based on a patch by Bob Paauwe. Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190314223839.28258-1-chris@chris-wilson.co.uk
-
- 14 Mar, 2019 4 commits
-
-
Rodrigo Vivi authored
I just noticed that initial PCH comparative patch left some >= PCH_ICP cases behind. Let's also cover these cases and leave only the pin map behind now. No functional change. Hence no fixes tag. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Chris Wilson authored
Since both GPU reset and declaring the device wedged suspend ongoing driver activity around a hard reset, we can reuse the same code to reduce the likelihood of forgetting details surrounding reset from either path. Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190314084432.3740-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
The impossible happens and a future fence expired while we were still initialising. The probable cause is that the test was preempted and we lost our scheduler cpu slice. Disable preemption during this test to rule out preemption as a source of timer disruption. References: https://bugs.freedesktop.org/show_bug.cgi?id=110039Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190313205944.5768-1-chris@chris-wilson.co.uk
-
Sujaritha Sundaresan authored
Adding the call to prepare for guc reset along with engine reset. intel_uc_reset_prepare() calls to disable guc communication and to sanitize. Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Reviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
- 13 Mar, 2019 7 commits
-
-
José Roberto de Souza authored
When any other value than EDP_PSR_TP4_TIME_0US is set, TPS1 and TPS4 will be used to do the link training when exiting PSR1. Happily the eDP panels tested so far was able to sync with source even without HBR3/TPS4 support but let use the right training pattern. TPS4 support was added to PSR1 registers because HBR3/PSR specification was not closed when ICL was freezed so if HBR3 was supported by PSR, ICL would already be ready but it was not added to specification so lets always disable TPS4. v3: Missed ";" SPANK SPANK SPANK!!! BSpec: 17524 Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190312195743.8829-3-jose.souza@intel.com
-
José Roberto de Souza authored
This will make hsw_activate_psr1() more easy to read and will make future modification to TPS registers more easy to review and read. v4: Rename new function to intel_psr1_get_tp_time() (Dhinakaran and Rodrigo) Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
José Roberto de Souza authored
A new field with the training pattern(TP) wakeup time for PSR2 was added to VBT, so lets use it when available otherwise it will fallback to PSR1 wakeup time. v2: replacing enum to numerical usec time (Jani) BSpec: 20131 Cc: Jani Nikula <jani.nikula@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
Rodrigo Vivi authored
In order to make it easier to bring up new platforms without having to take care about all corner cases that was previously taken care for previous platforms we already use comparative INTEL_GEN statements. Let's start doing the same with PCH. The only caveats are: - less-than comparisons need to be avoided or done with attention and check > PCH_NONE as well. - It is not necessarily a chronological order, but a matter of south display compatibility/inheritance. v2: Rebased on top of Jani's clean-up which removed the need for less-than comparison Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: -
Rodrigo Vivi authored
So we can later use PCH >= comparisons. The ultimate goal is to make it easier for us to introduce a new platform with south display engine on PCH just by reusing the previous one. Suggested-by:
-
Rodrigo Vivi authored
This exactly same approach was already used from gen9 to gen10 and from gen10 to gen11. Let's also use it for gen11+. Let's first assume that we inherit a similar platform and than we apply the differences on top. Different from the previous attempts this will be done this time with coccinelle. We obviously need to exclude some case that is really exclusive for gen11 like PCH, Firmware, and few others. Luckly this was easy to filter by selecting the files we are touching with coccinelle as exposed below: spatch -sp_file gen11\+.cocci --in-place i915_perf.c \ intel_bios.c intel_cdclk.c intel_ddi.c \ intel_device_info.c intel_display.c intel_dpll_mgr.c \ intel_dsi_vbt.c intel_hdmi.c intel_mocs.c intel_color.c @noticelake@ expression e; @@ -!IS_ICELAKE(e) +INTEL_GEN(e) < 11 @notgen11@ expression e; @@ -!IS_GEN(e, 11) +INTEL_GEN(e) < 11 @icelake@ expression e; @@ -IS_ICELAKE(e) +INTEL_GEN(e) >= 11 @gen11@ expression e; @@ -IS_GEN(e, 11) +INTEL_GEN(e) >= 11 No functional change. v2: Remove intel_lrc.c per Tvrtko request since those were w/a for ICL hw issuea and media related configuration. Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: -
Thomas Preston authored
We rely on VBT DDI port info for eDP detection on GEN9 platforms and above. This breaks GEN9 platforms which don't have VBT because port A eDP now defaults to false. Fix this by defaulting to true when VBT is missing. Fixes: a98d9c1d ("drm/i915/ddi: Rely on VBT DDI port info for eDP detection") Signed-off-by:
Thomas Preston <thomas.preston@codethink.co.uk> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190306200618.17405-1-thomas.preston@codethink.co.uk
-
- 12 Mar, 2019 3 commits
-
-
José Roberto de Souza authored
A new PCI ID for ICL was added to BSpec, lets keep it in tight sync as ICL is not protected by the alpha support flag anymore. v2: Keeping BSpec order(Rodrigo) BSepc: 21141 Reviewed-by:
-
Chris Wilson authored
Use a timedwait to promptly detect if the recovery after reset fails and provide a meaningful debug dump. Signed-off-by:
-
Chris Wilson authored
Move the pair of messages to the common callsite where it makes sense to include a bit more information about which request is being reset. Signed-off-by:
-
- 11 Mar, 2019 4 commits
-
-
Joonas Lahtinen authored
Merge tag 'topic/hdr-formats-2019-03-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-intel-next-queued Add support for Y21x and Y41x to drm core and i915, and P01x support to i915. Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/f2485309-d645-bed4-95f4-e66ff312aa05@linux.intel.com
-
Joonas Lahtinen authored
To facilitate merging topic/hdr-formats from Maarten. Signed-off-by: -
Aditya Swarup authored
Setting the pixel rounding bit to 1 in PIPE_CHICKEN register allows to passthrough FB pixels unmodified across pipe. This fixes the failures for DP link layer compliance tests 4.4.1.1, 4.4.1.2 & 4.4.1.3. (Lineage #1605353570) v2: This is also needed to fix failing IGT test case kms_cursor_crc on ICL.(Mika Kahola) Make macros consistent with i915_reg.h comments.(Jani Nikula) Cc: Clint Taylor <clinton.a.taylor@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
Aditya Swarup <aditya.swarup@intel.com> Reviewed-by:
Mika Kahola <mika.kahola@intel.com> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190307021412.18626-1-aditya.swarup@intel.com References: https://bugs.freedesktop.org/show_bug.cgi?id=103232
-
Joonas Lahtinen authored
Signed-off-by:
-
- 09 Mar, 2019 1 commit
-
-
Chris Wilson authored
In the next patch, we will want to update live state within a context. As this state may be in use by the GPU and we haven't been explicitly tracking its activity, we instead attach it to a request we send down the context setup with its new state and on retiring that request cleanup the old state as we then know that it is no longer live. Signed-off-by:
-
- 08 Mar, 2019 10 commits
-
-
Chris Wilson authored
It is debatable whether having an error message on suspend for forcibly cancelling outstanding work is worthwhile. We want to know if it occurs in the wild (as we will then have to reconsider the approach!), but equally is not fatal across suspend, as upon resume we automatically clear the wedged status. However, CI does trigger this scenario with gem_eio/suspend; as there we are intentionally wedging the device upon suspend. The dilemma is how not to trigger a failure report for the dmesg spam, for which the quickest response is to suppress the warning in the kernel. I'd rather mark it as accepted in gem_eio, but for now detecting when gem_eio is playing games and cancelling the warning for that case seems a barely acceptable hack. Testcase: igt/gem_eio/suspend Reference: 5861b013 ("drm/i915: Do a synchronous switch-to-kernel-context on idling") Signed-off-by:
-
José Roberto de Souza authored
The support for PSR2 was polished, IGT tests for PSR2 was added and it was tested performing regular user workloads like browsing, editing documents and compiling Linux, so it is time to enable it by default and enjoy even more power-savings. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
-
José Roberto de Souza authored
If PSR1 is active when pipe CRC is enabled the CRC calculations will be inhibit by the transition to low power states that PSR1 brings. So lets force a PSR1 exit and as soon as pipe CRC is enabled it will block PSR1 activation and avoid CRC timeouts when running IGT tests. There is a little window between the call to force exit PSR and the write to pipe CRC registers that needs to happen within the minimum of 6 idles frames otherwise PSR1 will be active again causing the CRC timeouts but anyways this will at least reduce the occurrence of CRC timeouts. This can possibily fix issues present right now but I did not found any open, I mostly got this issue from previous CI runs of this series, bellow some exambles: * igt@kms_color@pipe-b-ctm-0-75: - shard-apl: PASS -> FAIL +9 * igt@kms_cursor_legacy@flip-vs-cursor-busy-crc-legacy: - shard-apl: PASS -> DMESG-FAIL +17 * igt@kms_frontbuffer_tracking@fbc-1p-primscrn-indfb-pgflip-blt: - shard-kbl: PASS -> DMESG-FAIL +12 * igt@kms_pipe_crc_basic@read-crc-pipe-c: - shard-kbl: PASS -> FAIL +7 v6: s/PSR/PSR1 (Dhinakaran) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
José Roberto de Souza authored
All of this checks are redudant and can be removed as the if bellow already takes care when there is no changes in the state. Reviewed-by:
-
José Roberto de Souza authored
When PSR2 is active aka after the number of frames programmed in PSR2_CTL 'Frames Before SU Entry' hardware stops to generate CRC interrupts causing IGT tests to fail due timeout. This same behavior don't happen with PSR1, as soon as pipe CRC is enabled it blocks PSR1 activation so CRC calculation continues to happens normaly. This patch also set mode_changed as true when PSR is available to force atomic check functions to compute new PSR state, otherwise PSR2 would not be disabled. v4: Only setting mode_changed if has_psr is set(Dhinakaran) v3: Reusing intel_crtc_crc_prepare() and crc_enabled, only setting mode_changed if it can do PSR. v2: Changed commit description to describe that PSR2 inhibit CRC calculations. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
José Roberto de Souza authored
Other features like PSR2 also needs to be disabled while getting CRC so lets rename ips_force_disable to crc_enabled, drop all this checks for pipe A and HSW and BDW and make it generic and hsw_compute_ips_config() will take care of all the checks removed from here. v2: Renaming and parameter changes to the functions that prepares the commit (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
José Roberto de Souza authored
If has_psr is set it means that CRTC has a EDP panel attached so the EDP check is redundant and can be dropped. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
José Roberto de Souza authored
In any commit, intel_modeset_pipe_config() will initialilly clear and then recalculate most of the pipe states but it leave intel specific color features states in reset state. If after intel_pipe_config_compare() is detected that a fastset is possible it will mark update_pipe as true and unsed mode_changed, causing the color features state to be kept in reset state and then latter being committed to hardware disabling the color features. This issue can be reproduced by any code patch that duplicates the actual(with color features already enabled) state and only mark mode_changed as true. Reviewed-by:
-
José Roberto de Souza authored
Forcing a specific CRTC to the eDP connector was causing the intel_psr_fastset_force() to mark mode_chaged in the wrong and disabled CRTC causing no update in the PSR state. Looks like our internal state track do not clear output_types and has_psr in the disabled CRTCs, not sure if this is the expected behavior or not but in the mean time this fix the issue. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
-
José Roberto de Souza authored
Now we are checking sink capabilities when probing PSR DPCD register and then dynamically checking in if new state is compatible with PSR in, so this FIXME can be dropped. Reviewed-by:
-
