- 19 Nov, 2015 5 commits
-
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
Here are some drm core fixes for v4.4 that I've picked up. Atomic fixes from Maarten, and atomic helper fixes from Ville and Daniel. Admittedly the topmost commit didn't sit in our tree for very long, but does come with reviews and testing from trustworthy people. * tag 'topic/drm-fixes-2015-11-19' of git://anongit.freedesktop.org/drm-intel: drm/atomic-helper: Check encoder/crtc constraints drm: Fix primary plane size for stereo doubled modes for legacy setcrtc drm/core: Fix old_fb handling in pan_display_atomic. drm/core: Fix old_fb handling in restore_fbdev_mode_atomic. drm/atomic: add a drm_atomic_clean_old_fb helper. drm/core: Fix old_fb handling in drm_mode_atomic_ioctl. drm/core: Set legacy_cursor_update in drm_atomic_helper_disable_plane.
-
Daniel Vetter authored
This was totally lost when I originally created the atomic helpers. We probably should also check possible_clones in the helpers, but since the legacy ones didn't do that this is for a separate patch. Reported-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Stone <daniels@collabora.com> Reviewed-by:
Daniel Stone <daniels@collabora.com> Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1447868808-10266-1-git-send-email-daniel.vetter@ffwll.ch
-
Wang, Rui Y authored
The machine hang completely with the following message on the console: [ 487.777538] BUG: unable to handle kernel NULL pointer dereference at 0000000000000060 [ 487.777554] IP: [<ffffffff8158aaee>] _raw_spin_lock+0xe/0x30 [ 487.777557] PGD 42e9f7067 PUD 42f2fa067 PMD 0 [ 487.777560] Oops: 0002 [#1] SMP ... [ 487.777618] CPU: 21 PID: 3190 Comm: Xorg Tainted: G E 4.4.0-rc1-3-default+ #6 [ 487.777620] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRHSXSD1.86B.0059.R00.1501081238 01/08/2015 [ 487.777621] task: ffff880853ae4680 ti: ffff8808696d4000 task.ti: ffff8808696d4000 [ 487.777625] RIP: 0010:[<ffffffff8158aaee>] [<ffffffff8158aaee>] _raw_spin_lock+0xe/0x30 [ 487.777627] RSP: 0018:ffff8808696d79c0 EFLAGS: 00010246 [ 487.777628] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 487.777629] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000060 [ 487.777630] RBP: ffff8808696d79e0 R08: 0000000000000000 R09: ffff88086924a780 [ 487.777631] R10: 000000000001bb40 R11: 0000000000003246 R12: 0000000000000000 [ 487.777632] R13: ffff880463a27360 R14: ffff88046ca50218 R15: 0000000000000080 [ 487.777634] FS: 00007f3f81c5a8c0(0000) GS:ffff88086f060000(0000) knlGS:0000000000000000 [ 487.777635] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 487.777636] CR2: 0000000000000060 CR3: 000000042e678000 CR4: 00000000001406e0 [ 487.777638] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 487.777639] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 487.777639] Stack: [ 487.777642] ffffffffa00eb5fa ffff8808696d7b60 ffff88086b87d800 0000000000000000 [ 487.777644] ffff8808696d7ac8 ffffffffa01694b6 ffff8808696d7ae8 ffffffff8109c8d5 [ 487.777647] ffff880469158740 ffff880463a27000 ffff88086b87d800 ffff88086b87d800 [ 487.777647] Call Trace: [ 487.777674] [<ffffffffa00eb5fa>] ? drm_gem_object_lookup+0x1a/0xa0 [drm] [ 487.777681] [<ffffffffa01694b6>] mga_crtc_cursor_set+0xc6/0xb60 [mgag200] [ 487.777691] [<ffffffff8109c8d5>] ? find_busiest_group+0x35/0x4a0 [ 487.777696] [<ffffffff81086294>] ? __might_sleep+0x44/0x80 [ 487.777699] [<ffffffff815888c2>] ? __ww_mutex_lock+0x22/0x9c [ 487.777722] [<ffffffffa0104f64>] ? drm_modeset_lock+0x34/0xf0 [drm] [ 487.777733] [<ffffffffa0148d9e>] restore_fbdev_mode+0xee/0x2a0 [drm_kms_helper] [ 487.777742] [<ffffffffa014afce>] drm_fb_helper_restore_fbdev_mode_unlocked+0x2e/0x70 [drm_kms_helper] [ 487.777748] [<ffffffffa014b037>] drm_fb_helper_set_par+0x27/0x50 [drm_kms_helper] [ 487.777752] [<ffffffff8134560c>] fb_set_var+0x18c/0x3f0 [ 487.777777] [<ffffffffa02a9b0a>] ? __ext4_handle_dirty_metadata+0x8a/0x210 [ext4] [ 487.777783] [<ffffffff8133cb97>] fbcon_blank+0x1b7/0x2b0 [ 487.777790] [<ffffffff813be2a3>] do_unblank_screen+0xb3/0x1c0 [ 487.777795] [<ffffffff813b5aba>] vt_ioctl+0x118a/0x1210 [ 487.777801] [<ffffffff813a8fe0>] tty_ioctl+0x3f0/0xc90 [ 487.777808] [<ffffffff81172018>] ? kzfree+0x28/0x30 [ 487.777813] [<ffffffff811e053f>] ? mntput+0x1f/0x30 [ 487.777817] [<ffffffff811d3f5d>] do_vfs_ioctl+0x30d/0x570 [ 487.777822] [<ffffffff8107ed3a>] ? task_work_run+0x8a/0xa0 [ 487.777825] [<ffffffff811d4234>] SyS_ioctl+0x74/0x80 [ 487.777829] [<ffffffff8158aeae>] entry_SYSCALL_64_fastpath+0x12/0x71 [ 487.777851] Code: 65 ff 0d ce 02 a8 7e 5d c3 ba 01 00 00 00 f0 0f b1 17 85 c0 75 e8 b0 01 5d c3 0f 1f 00 65 ff 05 b1 02 a8 7e 31 c0 ba 01 00 00 00 <f0> 0f b1 17 85 c0 75 01 c3 55 89 c6 48 89 e5 e8 4e f5 b1 ff 5d [ 487.777854] RIP [<ffffffff8158aaee>] _raw_spin_lock+0xe/0x30 [ 487.777855] RSP <ffff8808696d79c0> [ 487.777856] CR2: 0000000000000060 [ 487.777860] ---[ end trace 672a2cd555e0ebd3 ]--- The cursor code may be entered with file_priv == NULL && handle == NULL. The problem was introduced by: "bf89209a drm/mga200g: Hold a proper reference for cursor_set" which calls drm_gem_object_lookup(dev, file_priv...). Previously this wasn't a problem because we checked the handle. Move the check early in the function can fix the problem. Signed-off-by:
Rui Wang <rui.y.wang@intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
git://github.com/anholt/linuxDave Airlie authored
Here are a few little VC4 fixes for 4.4 that I didn't get in to you before the -next pull request. I dropped the feature-ish one I'd mentioned, and also droppped the one I saw you included in the last -fixes pull request. * 'drm-vc4-fixes' of git://github.com/anholt/linux: drm/vc4: Make sure that planes aren't scaled. drm/vc4: Fix some failure to track __iomem decorations on pointers. drm/vc4: checking for NULL instead of IS_ERR drm/vc4: fix itnull.cocci warnings drm/vc4: fix platform_no_drv_owner.cocci warnings drm/vc4: vc4_plane_duplicate_state() can be static
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Radeon and amdgpu fixes for 4.4. A bit more the usual since I missed last week. Misc fixes all over the place. The big changes are the tiling configuration fixes for Fiji. * 'drm-fixes-4.4' of git://people.freedesktop.org/~agd5f/linux: (35 commits) drm/amdgpu: reserve/unreserve objects out of map/unmap operations drm/amdgpu: move bo_reserve out of amdgpu_vm_clear_bo drm/amdgpu: add lock for interval tree in vm drm/amdgpu: keep the owner for VMIDs drm/amdgpu: move VM manager clean into the VM code again drm/amdgpu: cleanup VM coding style drm/amdgpu: remove unused VM manager field drm/amdgpu: cleanup scheduler command submission drm/amdgpu: fix typo in firmware name drm/amdgpu: remove the unnecessary parameter adev for amdgpu_sa_bo_new() drm/amdgpu: wait interruptible when semaphores are disabled v2 drm/amdgpu: update pd while updating vm as well drm/amdgpu: fix handling order in scheduler CS drm/amdgpu: fix incorrect mutex usage v3 drm/amdgpu: cleanup scheduler fence get/put dance drm/amdgpu: add command submission workflow tracepoint drm/amdgpu: update Fiji's tiling mode table drm/amdgpu: fix bug that can't enter thermal interrupt for bonaire. drm/amdgpu: fix seq_printf format string drm/radeon: fix quirk for MSI R7 370 Armor 2X ...
-
- 18 Nov, 2015 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Martin Schwidefsky: "Assorted bug fixes, the mlock2 system call gets added, and one improvement. The boot from dasd devices is now possible from a wider range of devices" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: remove SALIPL loader s390: wire up mlock2 system call s390: remove g5 elf platform support s390: avoid cache aliasing under z/VM and KVM s390/sclp: _sclp_wait_int(): retain full PSW mask s390/zcrypt: Fix initialisation when zcrypt is built-in s390/zcrypt: Fix kernel crash on systems without AP bus support s390: add support for ipl devices in subchannel sets > 0 s390/ipl: fix out of bounds access in scpdata_write s390/pci_dma: improve debugging of errors during dma map s390/pci_dma: handle dma table failures s390/pci_dma: unify label of invalid translation table entries s390/syscalls: remove system call number calculation s390/cio: simplify css_generate_pgid s390/diag: add a s390 prefix to the diagnose trace point s390/head: fix error message on unsupported hardware
-
Linus Torvalds authored
Merge tag 'hwmon-for-linus-v4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fix build issues in scpi and ina2xx drivers, update scpi driver to support recent firmware, and fix an uninitialized variable warning in applesmc driver" * tag 'hwmon-for-linus-v4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (scpi) skip unsupported sensors properly hwmon: (scpi) add thermal-of dependency hwmon : (applesmc) Fix uninitialized variables warnings hwmon: (ina2xx) Fix build issue by selecting REGMAP_I2C
-
Chunming Zhou authored
Change-Id: Id6514f2fb6e002437fdbe99353d5d35f4ac736c7 Signed-off-by:
Chunming Zhou <David1.Zhou@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com>
-
Chunming Zhou authored
Change-Id: Ifbb0c06680494bfa04d0be5e5941d31ae2e5ef28 Signed-off-by:
-
Chunming Zhou authored
Change-Id: I62b892a22af37b32e6b4aefca80a25cf45426ed2 Signed-off-by:
-
Christian König authored
We don't need the last VM use any more, keep the owner directly. Signed-off-by:
Chunming Zhou <davdi1.zhou@amd.com>
-
Christian König authored
It's not a good idea to duplicate that code. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
Fix the indentation and move the VM functions to the structures. Signed-off-by:
Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by:
-
Christian König authored
Signed-off-by:
-
Christian König authored
Unify the two code path again, cause they do pretty much the same thing. Signed-off-by:
-
Christian König authored
Signed-off-by:
-
- 17 Nov, 2015 24 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix list tests in netfilter ingress support, from Florian Westphal. 2) Fix reversal of input and output interfaces in ingress hook invocation, from Pablo Neira Ayuso. 3) We have a use after free in r8169, caught by Dave Jones, fixed by Francois Romieu. 4) Splice use-after-free fix in AF_UNIX frmo Hannes Frederic Sowa. 5) Three ipv6 route handling bug fixes from Martin KaFai Lau: a) Don't create clone routes not managed by the fib6 tree b) Don't forget to check expiration of DST_NOCACHE routes. c) Handle rt->dst.from == NULL properly. 6) Several AF_PACKET fixes wrt transport header setting and SKB protocol setting, from Daniel Borkmann. 7) Fix thunder driver crash on shutdown, from Pavel Fedin. 8) Several Mellanox driver fixes (max MTU calculations, use of correct DMA unmap in TX path, etc.) from Saeed Mahameed, Tariq Toukan, Doron Tsur, Achiad Shochat, Eran Ben Elisha, and Noa Osherovich. 9) Several mv88e6060 DSA driver fixes (wrong bit definitions for certain registers, etc.) from Neil Armstrong. 10) Make sure to disable preemption while updating per-cpu stats of ip tunnels, from Jason A. Donenfeld. 11) Various ARM64 bpf JIT fixes, from Yang Shi. 12) Flush icache properly in ARM JITs, from Daniel Borkmann. 13) Fix masking of RX and TX interrupts in ravb driver, from Masaru Nagai. 14) Fix netdev feature propagation for devices not implementing ->ndo_set_features(). From Nikolay Aleksandrov. 15) Big endian fix in vmxnet3 driver, from Shrikrishna Khare. 16) RAW socket code increments incorrect SNMP counters, fix from Ben Cartwright-Cox. 17) IPv6 multicast SNMP counters are bumped twice, fix from Neil Horman. 18) Fix handling of VLAN headers on stacked devices when REORDER is disabled. From Vlad Yasevich. 19) Fix SKB leaks and use-after-free in ipvlan and macvlan drivers, from Sabrina Dubroca. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits) MAINTAINERS: Update Mellanox's Eth NIC driver entries net/core: revert "net: fix __netdev_update_features return.." and add comment af_unix: take receive queue lock while appending new skb rtnetlink: fix frame size warning in rtnl_fill_ifinfo net: use skb_clone to avoid alloc_pages failure. packet: Use PAGE_ALIGNED macro packet: Don't check frames_per_block against negative values net: phy: Use interrupts when available in NOLINK state phy: marvell: Add support for 88E1540 PHY arm64: bpf: make BPF prologue and epilogue align with ARM64 AAPCS macvlan: fix leak in macvlan_handle_frame ipvlan: fix use after free of skb ipvlan: fix leak in ipvlan_rcv_frame vlan: Do not put vlan headers back on bridge and macvlan ports vlan: Fix untag operations of stacked vlans with REORDER_HEADER off via-velocity: unconditionally drop frames with bad l2 length ipg: Remove ipg driver dl2k: Add support for IP1000A-based cards snmp: Remove duplicate OUTMCAST stat increment net: thunder: Check for driver data in nicvf_remove() ... -
Eric Anholt authored
We would scan out the memory around them if an upscale was attempted, and would just scan out incorrectly for downscaling. Signed-off-by:Eric Anholt <eric@anholt.net>
-
Eric Anholt authored
Caught by the kbuild test robot. v2: Fix the +i I dropped in the first version. Signed-off-by: -
Dan Carpenter authored
vc4_plane_init() returns an ERR_PTR on error, it doesn't return NULL. This was obviously intended because the next lines call PTR_ERR(primary_plane) already. Fixes: c8b75bca ('Eric Anholt <eric@anholt.net>') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Julia Lawall authored
Connector cannot be null because it is a list entry, ie accessed at an offset from the positions of the list structure pointers themselves. Generated by: scripts/coccinelle/iterators/itnull.cocci Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
drivers/gpu/drm/vc4/vc4_drv.c:248:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by:
-
kbuild test robot authored
Signed-off-by:
-
Or Gerlitz authored
Eugenia (Jenny) Emantayev is replacing Amir Vadai as the mlx4 Ethernet driver maintainer. Saeed Mahameed is assigned to maintain mlx5 Eth functionality. Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
This reverts commit 00ee5927 ("net: fix __netdev_update_features return on ndo_set_features failure") and adds a comment explaining why it's okay to return a value other than 0 upon error. Some drivers might actually change flags and return an error so it's better to fire a spurious notification rather than miss these. CC: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Hannes Frederic Sowa authored
While possibly in future we don't necessarily need to use sk_buff_head.lock this is a rather larger change, as it affects the af_unix fd garbage collector, diag and socket cleanups. This is too much for a stable patch. For the time being grab sk_buff_head.lock without disabling bh and irqs, so don't use locked skb_queue_tail. Fixes: 869e7c62 ("net: af_unix: implement stream sendpage support") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Reported-by:
Eric Dumazet <edumazet@google.com> Acked-by:
-
Hannes Frederic Sowa authored
Fix the following warning: CC net/core/rtnetlink.o net/core/rtnetlink.c: In function ‘rtnl_fill_ifinfo’: net/core/rtnetlink.c:1308:1: warning: the frame size of 2864 bytes is larger than 2048 bytes [-Wframe-larger-than=] } ^ by splitting up the huge rtnl_fill_ifinfo into some smaller ones, so we don't have the huge frame allocations at the same time. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Martin Zhang authored
1. new skb only need dst and ip address(v4 or v6). 2. skb_copy may need high order pages, which is very rare on long running server. Signed-off-by:
Junwei Zhang <linggao.zjw@alibaba-inc.com> Signed-off-by:
Martin Zhang <martinbj2008@gmail.com> Acked-by:
-
Tobias Klauser authored
Use PAGE_ALIGNED(...) instead of open-coding it. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
Tobias Klauser authored
rb->frames_per_block is an unsigned int, thus can never be negative. Also fix spacing in the calculation of frames_per_block. Signed-off-by:
-
Andrew Lunn authored
The NOLINK state will poll the phy once a second to see if the link has come up. If the phy has an interrupt line, this polling can be skipped, since the phy should interrupt when the link returns. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Andrew Lunn authored
The 88E1540 can be found embedded in the Marvell 88E6352 switch. It is compatible with the 88E1510, so add support for it, using the 88E1510 specific functions. Signed-off-by:
-
Yang Shi authored
Save and restore FP/LR in BPF prog prologue and epilogue, save SP to FP in prologue in order to get the correct stack backtrace. However, ARM64 JIT used FP (x29) as eBPF fp register, FP is subjected to change during function call so it may cause the BPF prog stack base address change too. Use x25 to replace FP as BPF stack base register (fp). Since x25 is callee saved register, so it will keep intact during function call. It is initialized in BPF prog prologue when BPF prog is started to run everytime. Save and restore x25/x26 in BPF prologue and epilogue to keep them intact for the outside of BPF. Actually, x26 is unnecessary, but SP requires 16 bytes alignment. So, the BPF stack layout looks like: high original A64_SP => 0:+-----+ BPF prologue |FP/LR| current A64_FP => -16:+-----+ | ... | callee saved registers +-----+ | | x25/x26 BPF fp register => -80:+-----+ | | | ... | BPF prog stack | | | | current A64_SP => +-----+ | | | ... | Function call stack | | +-----+ low CC: Zi Shen Lim <zlim.lnx@gmail.com> CC: Xi Wang <xi.wang@gmail.com> Signed-off-by:Yang Shi <yang.shi@linaro.org> Acked-by:
Zi Shen Lim <zlim.lnx@gmail.com> Signed-off-by:
-
Sabrina Dubroca authored
Reset pskb in macvlan_handle_frame in case skb_share_check returned a clone. Fixes: 8a4eb573 ("net: introduce rx_handler results and logic around that") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Sabrina Dubroca authored
ipvlan_handle_frame is a rx_handler, and when it returns a value other than RX_HANDLER_CONSUMED (here, NET_RX_DROP aka RX_HANDLER_ANOTHER), __netif_receive_skb_core expects that the skb still exists and will process it further, but we just freed it. Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by:
-
Sabrina Dubroca authored
Pass a **skb to ipvlan_rcv_frame so that if skb_share_check returns a new skb, we actually use it during further processing. It's safe to ignore the new skb in the ipvlan_xmit_* functions, because they call ipvlan_rcv_frame with local == true, so that dev_forward_skb is called and always takes ownership of the skb. Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by:
-
David S. Miller authored
Vladislav Yasevich says: ==================== Fix issues with vlans without REORDER_HEADER A while ago Phil Sutter brought up an issue with vlans without REORDER_HEADER and bridges. The problem was that if a vlan without REORDER_HEADER was a port in the bridge, the bridge ended up forwarding corrupted packets that still contained the vlan header. The same issue exists for bridge mode macvlan/macvtap devices. An additional issue with vlans without REORDER_HEADER is that stacking them also doesn't work. The reason here is that skb_reorder_vlan_header() function assumes that it on ETH_HLEN bytes deep into the packet. That is not the case, when you a vlan without REORRDER_HEADER flag set. This series attempts to correct these 2 issues. 1) To solve the stacked vlans problem, the patch simply use skb->mac_len as an offset to start copying mac addresses that is part of header reordering. 2) To fix the issue with bridge/macvlan/macvtap, the second patch simply doesn't write the vlan header back to the packet if the vlan device is either a bridge or a macvlan port. This ends up being the simplest and least performance intrussive solution. I've considered extending patch 2 to all stacked devices (essentially checked for the presense of rx_handler), but that feels like a broader restriction and _may_ break existing uses. ==================== Signed-off-by: -
Vlad Yasevich authored
When a vlan is configured with REORDER_HEADER set to 0, the vlan header is put back into the packet and makes it appear that the vlan header is still there even after it's been processed. This posses a problem for bridge and macvlan ports. The packets passed to those device may be forwarded and at the time of the forward, vlan headers end up being unexpectedly present. With the patch, we make sure that we do not put the vlan header back (when REORDER_HEADER is 0) if a bridge or macvlan has been configured on top of the vlan device. Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by:
-
Vlad Yasevich authored
When we have multiple stacked vlan devices all of which have turned off REORDER_HEADER flag, the untag operation does not locate the ethernet addresses correctly for nested vlans. The reason is that in case of REORDER_HEADER flag being off, the outer vlan headers are put back and the mac_len is adjusted to account for the presense of the header. Then, the subsequent untag operation, for the next level vlan, always use VLAN_ETH_HLEN to locate the begining of the ethernet header and that ends up being a multiple of 4 bytes short of the actuall beginning of the mac header (the multiple depending on the how many vlan encapsulations ethere are). As a reslult, if there are multiple levles of vlan devices with REODER_HEADER being off, the recevied packets end up being dropped. To solve this, we use skb->mac_len as the offset. The value is always set on receive path and starts out as a ETH_HLEN. The value is also updated when the vlan header manupations occur so we know it will be correct. Signed-off-by:
-
Timo Teräs authored
By default the driver allowed incorrect frames to be received. What is worse the code does not handle very short frames correctly. The FCS length is unconditionally subtracted, and the underflow can cause skb_put to be called with large number after implicit cast to unsigned. And indeed, an skb_over_panic() was observed with via-velocity. This removes the module parameter as it does not work in it's current state, and should be implemented via NETIF_F_RXALL if needed. Suggested-by:
Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
Timo Teräs <timo.teras@iki.fi> Signed-off-by:
-
