Once created, a kernfs_node is always destroyed by kernfs_put().
Since ba7443bc ("sysfs, kernfs: implement
kernfs_create/destroy_root()"), kernfs_put() depends on kernfs_root()
to locate the ino_ida.  kernfs_root() in turn depends on
kernfs_node->parent being set for !dir nodes.  This means that
kernfs_put() of a !dir node requires its ->parent to be initialized.

This leads to oops when a newly created !dir node is destroyed without
going through kernfs_add_one() or after failing kernfs_add_one()
before ->parent is set.  kernfs_root() invoked from kernfs_put() will
try to dereference NULL parent.

Fix it by moving parent association to kernfs_new_node() from
kernfs_add_one().  kernfs_new_node() now takes @parent instead of
@root and determines the root from the parent and also sets the new
node's parent properly.  @parent parameter is removed from
kernfs_add_one().  As there's no parent when creating the root node,
__kernfs_new_node() which takes @root as before and doesn't set the
parent is used in that case.

This ensures that a kernfs_node in any stage in its life has its
parent associated and thus can be put.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Hello, Greg.

Two misc fixes for kernfs.

Thanks.
------- 8< -------
struct dentry is used in kernfs.h but its declaration was missing,
leading to compilation errors unless its declaration gets pulled in in
some other way.  Add the declaration.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When kernfs_seq_start() fails to obtain an active reference, it
returns ERR_PTR(-ENODEV).  kernfs_seq_stop() is then invoked with the
error pointer value; however, it still proceeds to invoke
kernfs_put_active() on the node leading to unbalanced put.

If kernfs_seq_stop() is called even after active ref failure, it
should skip invocation of @ops->seq_stop() and put_active.
Unfortunately, this is a bit complicated because active ref failure
isn't the only thing which may fail with ERR_PTR(-ENODEV).
@ops->seq_start/next() may also fail with the error value and
kernfs_seq_stop() doesn't have a way to tell apart those failures.

Work it around by factoring out the active part of kernfs_seq_stop()
into kernfs_seq_stop_active() and invoking it directly if
@ops->seq_start/next() fail with ERR_PTR(-ENODEV) and updating
kernfs_seq_stop() to skip kernfs_seq_stop_active() on
ERR_PTR(-ENODEV).  This is a bit nasty but ensures that the active put
is skipped iff get_active failed in kernfs_seq_start().

tj: This was originally committed as d92d2e6b but got reverted by
    683bb276 along with other kernfs self removal patches.
    However, this one is an independent fix and shouldn't have been
    reverted together.  Reinstate the change.  Sorry about the mess.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit d92d2e6b.

Tejun writes:
        I'm sorry but can you please revert the whole series?
        get_active() waiting while a node is deactivated has potential
        to lead to deadlock and that deactivate/reactivate interface is
        something fundamentally flawed and that cgroup will have to work
        with the remove_self() like everybody else.  IOW, I think the
        first posting was correct.

Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit ea1c472d.

Tejun writes:
        I'm sorry but can you please revert the whole series?
        get_active() waiting while a node is deactivated has potential
        to lead to deadlock and that deactivate/reactivate interface is
        something fundamentally flawed and that cgroup will have to work
        with the remove_self() like everybody else.  IOW, I think the
        first posting was correct.

Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit a69d001c.

Tejun writes:
        I'm sorry but can you please revert the whole series?
        get_active() waiting while a node is deactivated has potential
        to lead to deadlock and that deactivate/reactivate interface is
        something fundamentally flawed and that cgroup will have to work
        with the remove_self() like everybody else.  IOW, I think the
        first posting was correct.

Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit ae34372e.

Tejun writes:
        I'm sorry but can you please revert the whole series?
        get_active() waiting while a node is deactivated has potential
        to lead to deadlock and that deactivate/reactivate interface is
        something fundamentally flawed and that cgroup will have to work
        with the remove_self() like everybody else.  IOW, I think the
        first posting was correct.

Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 45a140e5.

Tejun writes:
        I'm sorry but can you please revert the whole series?
        get_active() waiting while a node is deactivated has potential
        to lead to deadlock and that deactivate/reactivate interface is
        something fundamentally flawed and that cgroup will have to work
        with the remove_self() like everybody else.  IOW, I think the
        first posting was correct.

Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit f601f9a2.

Tejun writes:
        I'm sorry but can you please revert the whole series?
        get_active() waiting while a node is deactivated has potential
        to lead to deadlock and that deactivate/reactivate interface is
        something fundamentally flawed and that cgroup will have to work
        with the remove_self() like everybody else.  IOW, I think the
        first posting was correct.

Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 99177a34.

Tejun writes:
        I'm sorry but can you please revert the whole series?
        get_active() waiting while a node is deactivated has potential
        to lead to deadlock and that deactivate/reactivate interface is
        something fundamentally flawed and that cgroup will have to work
        with the remove_self() like everybody else.  IOW, I think the
        first posting was correct.

Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 895a068a.

Tejun writes:
        I'm sorry but can you please revert the whole series?
        get_active() waiting while a node is deactivated has potential
        to lead to deadlock and that deactivate/reactivate interface is
        something fundamentally flawed and that cgroup will have to work
        with the remove_self() like everybody else.  IOW, I think the
        first posting was correct.

Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 9f010c2a.

Tejun writes:
        I'm sorry but can you please revert the whole series?
        get_active() waiting while a node is deactivated has potential
        to lead to deadlock and that deactivate/reactivate interface is
        something fundamentally flawed and that cgroup will have to work
        with the remove_self() like everybody else.  IOW, I think the
        first posting was correct.

Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 1ae06819.

Tejun writes:
        I'm sorry but can you please revert the whole series?
        get_active() waiting while a node is deactivated has potential
        to lead to deadlock and that deactivate/reactivate interface is
        something fundamentally flawed and that cgroup will have to work
        with the remove_self() like everybody else.  IOW, I think the
        first posting was correct.

Cc: Tejun Heo <tj@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 6716d289.

Tejun writes:
        I'm sorry but can you please revert the whole series?
        get_active() waiting while a node is deactivated has potential
        to lead to deadlock and that deactivate/reactivate interface is
        something fundamentally flawed and that cgroup will have to work
        with the remove_self() like everybody else.  IOW, I think the
        first posting was correct.

Cc: Tejun Heo <tj@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit de1dee78.

Tejun writes:
        I'm sorry but can you please revert the whole series?
        get_active() waiting while a node is deactivated has potential
        to lead to deadlock and that deactivate/reactivate interface is
        something fundamentally flawed and that cgroup will have to work
        with the remove_self() like everybody else.  IOW, I think the
        first posting was correct.

Cc: Tejun Heo <tj@kernel.org>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit bdbb0a13.

Tejun writes:
        I'm sorry but can you please revert the whole series?
        get_active() waiting while a node is deactivated has potential
        to lead to deadlock and that deactivate/reactivate interface is
        something fundamentally flawed and that cgroup will have to work
        with the remove_self() like everybody else.  IOW, I think the
        first posting was correct.

Cc: Tejun Heo <tj@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: linux-s390@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit d1ba277e.

Tejun writes:
        I'm sorry but can you please revert the whole series?
        get_active() waiting while a node is deactivated has potential
        to lead to deadlock and that deactivate/reactivate interface is
        something fundamentally flawed and that cgroup will have to work
        with the remove_self() like everybody else.  IOW, I think the
        first posting was correct.

Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 88533f99.

Tejun writes:
        I'm sorry but can you please revert the whole series?
        get_active() waiting while a node is deactivated has potential
        to lead to deadlock and that deactivate/reactivate interface is
        something fundamentally flawed and that cgroup will have to work
        with the remove_self() like everybody else.  IOW, I think the
        first posting was correct.

Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

895a068a ("kernfs: make kernfs_get_active() block if the node is
deactivated but not removed") added "struct kernfs_root *root =
kernfs_root(kn);" at the head of the function; however, the parameter
@kn is checked for later implying that the function may be called with
NULL.  This means that we may end up invoking kernfs_root() with NULL
which will oops.  None of the existing users invokes removal with NULL
@kn, so this bug doesn't actually trigger.

We can relocate kernfs_root() invocation after NULL check; however,
allowing NULL param tends to cause more confusion than actually
helping anything.  As there's no existing user, let's remove the
spurious NULL check.

This bug was detected by smatch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Subsystems such as ALSA, DRM and others require a single card-level
device structure to represent a subsystem.  However, firmware tends to
describe the individual devices and the connections between them.

Therefore, we need a way to gather up the individual component devices
together, and indicate when we have all the component devices.

We do this in DT by providing a "superdevice" node which specifies
the components, eg:

	imx-drm {
		compatible = "fsl,drm";
		crtcs = <&ipu1>;
		connectors = <&hdmi>;
	};

The superdevice is declared into the component support, along with the
subcomponents.  The superdevice receives callbacks to locate the
subcomponents, and identify when all components are present.  At this
point, we bind the superdevice, which causes the appropriate subsystem
to be initialised in the conventional way.

When any of the components or superdevice are removed from the system,
we unbind the superdevice, thereby taking the subsystem down.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All device_schedule_callback_owner() users are converted to use
device_remove_file_self().  Remove now unused
{sysfs|device}_schedule_callback_owner().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver-core now supports synchrnous self-deletion of attributes and
the asynchrnous removal mechanism is scheduled for removal.  Use it
instead of device_schedule_callback().

* Conversions in arch/s390/pci/pci_sysfs.c and
  drivers/s390/block/dcssblk.c are straightforward.

* drivers/s390/cio/ccwgroup.c is a bit more tricky because
  ccwgroup_notifier() was (ab)using device_schedule_callback() to
  purely obtain a process context to kick off ungroup operation which
  may block from a notifier callback.

  Rename ccwgroup_ungroup_callback() to ccwgroup_ungroup() and make it
  take ccwgroup_device * instead.  The new function is now called
  directly from ccwgroup_ungroup_store().

  ccwgroup_notifier() chain is updated to explicitly bounce through
  ccwgroup_device->ungroup_work.  This also removes possible failure
  from memory pressure.

Only compile-tested.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: linux-s390@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver-core now supports synchrnous self-deletion of attributes and
the asynchrnous removal mechanism is scheduled for removal.  Use it
instead of device_schedule_callback().  This makes "delete" behave
synchronously.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver-core now supports synchrnous self-deletion of attributes and
the asynchrnous removal mechanism is scheduled for removal.  Use it
instead of device_schedule_callback().  This makes "remove" behave
synchronously.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sometimes it's necessary to implement a node which wants to delete
nodes including itself.  This isn't straightforward because of kernfs
active reference.  While a file operation is in progress, an active
reference is held and kernfs_remove() waits for all such references to
drain before completing.  For a self-deleting node, this is a deadlock
as kernfs_remove() ends up waiting for an active reference that itself
is sitting on top of.

This currently is worked around in the sysfs layer using
sysfs_schedule_callback() which makes such removals asynchronous.
While it works, it's rather cumbersome and inherently breaks
synchronicity of the operation - the file operation which triggered
the operation may complete before the removal is finished (or even
started) and the removal may fail asynchronously.  If a removal
operation is immmediately followed by another operation which expects
the specific name to be available (e.g. removal followed by rename
onto the same name), there's no way to make the latter operation
reliable.

The thing is there's no inherent reason for this to be asynchrnous.
All that's necessary to do this synchronous is a dedicated operation
which drops its own active ref and deactivates self.  This patch
implements kernfs_remove_self() and its wrappers in sysfs and driver
core.  kernfs_remove_self() is to be called from one of the file
operations, drops the active ref and deactivates using
__kernfs_deactivate_self(), removes the self node, and restores active
ref to the dead node using __kernfs_reactivate_self() so that the ref
is balanced afterwards.  __kernfs_remove() is updated so that it takes
an early exit if the target node is already fully removed so that the
active ref restored by kernfs_remove_self() after removal doesn't
confuse the deactivation path.

This makes implementing self-deleting nodes very easy.  The normal
removal path doesn't even need to be changed to use
kernfs_remove_self() for the self-deleting node.  The method can
invoke kernfs_remove_self() on itself before proceeding the normal
removal path.  kernfs_remove() invoked on the node by the normal
deletion path will simply be ignored.

This will replace sysfs_schedule_callback().  A subtle feature of
sysfs_schedule_callback() is that it collapses multiple invocations -
even if multiple removals are triggered, the removal callback is run
only once.  An equivalent effect can be achieved by testing the return
value of kernfs_remove_self() - only the one which gets %true return
value should proceed with actual deletion.  All other instances of
kernfs_remove_self() will wait till the enclosing kernfs operation
which invoked the winning instance of kernfs_remove_self() finishes
and then return %false.  This trivially makes all users of
kernfs_remove_self() automatically show correct synchronous behavior
even when there are multiple concurrent operations - all "echo 1 >
delete" instances will finish only after the whole operation is
completed by one of the instances.

v2: For !CONFIG_SYSFS, dummy version kernfs_remove_self() was missing
    and sysfs_remove_file_self() had incorrect return type.  Fix it.
    Reported by kbuild test bot.

v3: Updated to use __kernfs_{de|re}activate_self().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch implements four functions to manipulate deactivation state
- deactivate, reactivate and the _self suffixed pair.  A new fields
kernfs_node->deact_depth is added so that concurrent and nested
deactivations are handled properly.  kernfs_node->hash is moved so
that it's paired with the new field so that it doesn't increase the
size of kernfs_node.

A kernfs user's lock would normally nest inside active ref but during
removal the user may want to perform kernfs_remove() while holding the
said lock, which would introduce a reverse locking dependency.  This
function can be used to break such reverse dependency by allowing
deactivation step to performed separately outside user's critical
section.

This will also be used implement kernfs_remove_self().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently, kernfs_get_active() fails if the target node is
deactivated.  This is fine as a node always gets removed after
deactivation; however, we're gonna add reactivation so the assumption
won't hold.  It'd be incorrect for kernfs_get_active() to fail for a
node which was deactivated only temporarily.

This patch makes kernfs_get_active() block if the node is deactivated
but not removed.  If the node gets reactivated (not yet implemented),
it will be retried and succeed.  If the node gets removed, it will be
woken up and fail.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs_addrm_cxt and the accompanying kernfs_addrm_start/finish() were
added because there were operations which should be performed outside
kernfs_mutex after adding and removing kernfs_nodes.  The necessary
operations were recorded in kernfs_addrm_cxt and performed by
kernfs_addrm_finish(); however, after the recent changes which
relocated deactivation and unmapping so that they're performed
directly during removal, the only operation kernfs_addrm_finish()
performs is kernfs_put(), which can be moved inside the removal path
too.

This patch moves the kernfs_put() of the base ref to __kernfs_remove()
and remove kernfs_addrm_cxt and kernfs_addrm_start/finish().

* kernfs_add_one() is updated to grab and release the parent's active
  ref and kernfs_mutex itself.  kernfs_get/put_active() and
  kernfs_addrm_start/finish() invocations around it are removed from
  all users.

* __kernfs_remove() puts an unlinked node directly instead of chaining
  it to kernfs_addrm_cxt.  Its callers are updated to grab and release
  kernfs_mutex instead of calling kernfs_addrm_start/finish() around
  it.

v2: Updated to fit the v2 restructuring of removal path.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs_unmap_bin_file() is supposed to unmap all memory mappings of
the target file before kernfs_remove() finishes; however, it currently
is being called from kernfs_addrm_finish() and has the same race
problem as the original implementation of deactivation when there are
multiple removers - only the remover which snatches the node to its
addrm_cxt->removed list is guaranteed to wait for its completion
before returning.

It can be fixed by moving kernfs_unmap_bin_file() invocation from
kernfs_addrm_finish() to __kernfs_remove().  The function may be
called multiple times but that shouldn't do any harm.

We end up dropping kernfs_mutex in the removal loop and the node may
be removed inbetween by someone else.  kernfs_unlink_sibling() is
updated to test whether the node has already been removed and return
accordingly.  __kernfs_remove() in turn performs post-unlinking
cleanup only if it actually unlinked the node.

KERNFS_HAS_MMAP test is moved out of the unmap function into
__kernfs_remove() so that we don't unlock kernfs_mutex unnecessarily.
While at it, drop the now meaningless "bin" qualifier from the
function name.

v2: Rewritten to fit the v2 restructuring of removal path.  HAS_MMAP
    test relocated.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The recursive nature of kernfs_remove() means that, even if
kernfs_remove() is not allowed to be called multiple times on the same
node, there may be race conditions between removal of parent and its
descendants.  While we can claim that kernfs_remove() shouldn't be
called on one of the descendants while the removal of an ancestor is
in progress, such rule is unnecessarily restrictive and very difficult
to enforce.  It's better to simply allow invoking kernfs_remove() as
the caller sees fit as long as the caller ensures that the node is
accessible.

The current behavior in such situations is broken.  Whoever enters
removal path first takes the node off the hierarchy and then
deactivates.  Following removers either return as soon as it notices
that it's not the first one or can't even find the target node as it
has already been removed from the hierarchy.  In both cases, the
following removers may finish prematurely while the nodes which should
be removed and drained are still being processed by the first one.

This patch restructures so that multiple removers, whether through
recursion or direction invocation, always follow the following rules.

* When there are multiple concurrent removers, only one puts the base
  ref.

* Regardless of which one puts the base ref, all removers are blocked
  until the target node is fully deactivated and removed.

To achieve the above, removal path now first deactivates the subtree,
drains it and then unlinks one-by-one.  __kernfs_deactivate() is
called directly from __kernfs_removal() and drops and regrabs
kernfs_mutex for each descendant to drain active refs.  As this means
that multiple removers can enter __kernfs_deactivate() for the same
node, the function is updated so that it can handle multiple
deactivators of the same node - only one actually deactivates but all
wait till drain completion.

The restructured removal path guarantees that a removed node gets
unlinked only after the node is deactivated and drained.  Combined
with proper multiple deactivator handling, this guarantees that any
invocation of kernfs_remove() returns only after the node itself and
all its descendants are deactivated, drained and removed.

v2: Draining separated into a separate loop (used to be in the same
    loop as unlink) and done from __kernfs_deactivate().  This is to
    allow exposing deactivation as a separate interface later.

    Root node removal was broken in v1 patch.  Fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KERNFS_REMOVED is used to mark half-initialized and dying nodes so
that they don't show up in lookups and deny adding new nodes under or
renaming it; however, its role overlaps those of deactivation and
removal from rbtree.

It's necessary to deny addition of new children while removal is in
progress; however, this role considerably intersects with deactivation
- KERNFS_REMOVED prevents new children while deactivation prevents new
file operations.  There's no reason to have them separate making
things more complex than necessary.

KERNFS_REMOVED is also used to decide whether a node is still visible
to vfs layer, which is rather redundant as equivalent determination
can be made by testing whether the node is on its parent's children
rbtree or not.

This patch removes KERNFS_REMOVED.

* Instead of KERNFS_REMOVED, each node now starts its life
  deactivated.  This means that we now use both atomic_add() and
  atomic_sub() on KN_DEACTIVATED_BIAS, which is INT_MIN.  The compiler
  generates an overflow warnings when negating INT_MIN as the negation
  can't be represented as a positive number.  Nothing is actually
  broken but let's bump BIAS by one to avoid the warnings for archs
  which negates the subtrahend..

* KERNFS_REMOVED tests in add and rename paths are replaced with
  kernfs_get/put_active() of the target nodes.  Due to the way the add
  path is structured now, active ref handling is done in the callers
  of kernfs_add_one().  This will be consolidated up later.

* kernfs_remove_one() is updated to deactivate instead of setting
  KERNFS_REMOVED.  This removes deactivation from kernfs_deactivate(),
  which is now renamed to kernfs_drain().

* kernfs_dop_revalidate() now tests RB_EMPTY_NODE(&kn->rb) instead of
  KERNFS_REMOVED and KERNFS_REMOVED test in kernfs_dir_pos() is
  dropped.  A node which is removed from the children rbtree is not
  included in the iteration in the first place.  This means that a
  node may be visible through vfs a bit longer - it's now also visible
  after deactivation until the actual removal.  This slightly enlarged
  window difference doesn't make any difference to the userland.

* Sanity check on KERNFS_REMOVED in kernfs_put() is replaced with
  checks on the active ref.

* Some comment style updates in the affected area.

v2: Reordered before removal path restructuring.  kernfs_active()
    dropped and kernfs_get/put_active() used instead.  RB_EMPTY_NODE()
    used in the lookup paths.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There currently are two mechanisms gating active ref lockdep
annotations - KERNFS_LOCKDEP flag and KERNFS_ACTIVE_REF type mask.
The former disables lockdep annotations in kernfs_get/put_active()
while the latter disables all of kernfs_deactivate().

While KERNFS_ACTIVE_REF also behaves as an optimization to skip the
deactivation step for non-file nodes, the benefit is marginal and it
needlessly diverges code paths.  Let's drop KERNFS_ACTIVE_REF and use
KERNFS_LOCKDEP in kernfs_deactivate() too.

While at it, add a test helper kernfs_lockdep() to test KERNFS_LOCKDEP
flag so that it's more convenient and the related code can be compiled
out when not enabled.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernfs_node->u.completion is used to notify deactivation completion
from kernfs_put_active() to kernfs_deactivate().  We now allow
multiple racing removals of the same node and the current removal
scheme is no longer correct - kernfs_remove() invocation may return
before the node is properly deactivated if it races against another
removal.  The removal path will be restructured to address the issue.

To help such restructure which requires supporting multiple waiters,
this patch replaces kernfs_node->u.completion with
kernfs_root->deactivate_waitq.  This makes deactivation event
notifications share a per-root waitqueue_head; however, the wait path
is quite cold and this will also allow shaving one pointer off
kernfs_node.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When kernfs_seq_start() fails to obtain an active reference, it
returns ERR_PTR(-ENODEV).  kernfs_seq_stop() is then invoked with the
error pointer value; however, it still proceeds to invoke
kernfs_put_active() on the node leading to unbalanced put.

If kernfs_seq_stop() is called even after active ref failure, it
should skip invocation of @ops->seq_stop() and put_active.
Unfortunately, this is a bit complicated because active ref failure
isn't the only thing which may fail with ERR_PTR(-ENODEV).
@ops->seq_start/next() may also fail with the error value and
kernfs_seq_stop() doesn't have a way to tell apart those failures.

Work it around by factoring out the active part of kernfs_seq_stop()
into kernfs_seq_stop_active() and invoking it directly if
@ops->seq_start/next() fail with ERR_PTR(-ENODEV) and updating
kernfs_seq_stop() to skip kernfs_seq_stop_active() on
ERR_PTR(-ENODEV).  This is a bit nasty but ensures that the active put
is skipped iff get_active failed in kernfs_seq_start().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We expect to read firmware blobs with a single call to kernel_read(),
which returns int.  Therefore the size must be within the range of
int, not long.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Avoid that bus_unregister() triggers a use-after-free with
CONFIG_DEBUG_KOBJECT_RELEASE=y. This patch avoids that the
following sequence triggers a kernel crash with memory poisoning
enabled:
* bus_register()
* driver_register()
* driver_unregister()
* bus_unregister()

The above sequence causes the bus private data to be freed from
inside the bus_unregister() call although it is not guaranteed in
that function that the reference count on the bus private data has
dropped to zero. As an example, with CONFIG_DEBUG_KOBJECT_RELEASE=y
the ${bus}/drivers kobject is still holding a reference on
bus->p->subsys.kobj via its parent pointer at the time the bus
private data is freed. Fix this by deferring freeing the bus private
data until the last kobject_put() call on bus->p->subsys.kobj.

The kernel oops triggered by the above sequence and with memory
poisoning enabled and that is fixed by this patch is as follows:

general protection fault: 0000 [#1] PREEMPT SMP
CPU: 3 PID: 2711 Comm: kworker/3:32 Tainted: G        W  O 3.13.0-rc4-debug+ #1
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Workqueue: events kobject_delayed_cleanup
task: ffff880037f866d0 ti: ffff88003b638000 task.ti: ffff88003b638000
Call Trace:
 [<ffffffff81263105>] ? kobject_get_path+0x25/0x100
 [<ffffffff81264354>] kobject_uevent_env+0x134/0x600
 [<ffffffff8126482b>] kobject_uevent+0xb/0x10
 [<ffffffff81262fa2>] kobject_delayed_cleanup+0xc2/0x1b0
 [<ffffffff8106c047>] process_one_work+0x217/0x700
 [<ffffffff8106bfdb>] ? process_one_work+0x1ab/0x700
 [<ffffffff8106c64b>] worker_thread+0x11b/0x3a0
 [<ffffffff8106c530>] ? process_one_work+0x700/0x700
 [<ffffffff81074b70>] kthread+0xf0/0x110
 [<ffffffff81074a80>] ? insert_kthread_work+0x80/0x80
 [<ffffffff815673bc>] ret_from_fork+0x7c/0xb0
 [<ffffffff81074a80>] ? insert_kthread_work+0x80/0x80
Code: 89 f8 48 89 e5 f6 82 c0 27 63 81 20 74 15 0f 1f 44 00 00 48 83 c0 01 0f b6 10 f6 82 c0 27 63 81 20 75 f0 5d c3 66 0f 1f 44 00 00 <80> 3f 00 55 48 89 e5 74 15 48 89 f8 0f 1f 40 00 48 83 c0 01 80
RIP  [<ffffffff81267ed0>] strlen+0x0/0x30
 RSP <ffff88003b639c70>
---[ end trace 210f883ef80376aa ]---
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Avoid that sparse reports the following warning on __fw_free_buf():

drivers/base/firmware_class.c:230:9: warning: context imbalance in '__fw_free_buf' - unexpected unlock
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit eee03164.

Jeff writes:
	I have no objections to reverting it. There were concerns from
	Al Viro that it'd be tough to get right by callers and I had
	assumed it got dropped after that. I had planned on using it in
	my btrfs sysfs exports patchset but came up with a better way.

Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We want these fixes here to handle some merge issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>