- 15 Jan, 2015 3 commits
-
-
Michael Holzheu authored
The skb_copy_bits() function has the following signature: int skb_copy_bits(const struct sk_buff *skb, int offset, void *to, int len) Currently in bpf_jit.S the "to" and "len" parameters have been exchanged. So fix this and call the function with the correct parameters. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Michael Holzheu authored
Currently the signed COMPARE HALFWORD IMMEDIATE (chi) and COMPARE (c) instructions are used to compare "A" with "K". This is not correct because "A" and "K" are both unsigned. To fix this remove the chi instruction (no unsigned analogon available) and use the unsigned COMPARE LOGICAL (cl) instruction instead of COMPARE (c). Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linuxLinus Torvalds authored
Pull thermal fixes from Zhang Rui: "Specifics: - bogus type qualifier fix in OF thermal code. - Minor fixes on imx and rcar thermal drivers. - Update TI SoC thermal maintainer entry. - Updated documentation of OF cpufreq cooling register" * 'thermal-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: rcar: Spelling/grammar: s/drier use .../driver uses ...s/ thermal: rcar: change type of ctemp in rcar_thermal_update_temp() thermal: rcar: fix ENR register value Documentation: thermal: document of_cpufreq_cooling_register() Thermal: imx: add clk disable/enable for suspend/resume MAINTAINERS: update ti-soc-thermal status MAINTAINERS: Add linux-omap to list of reviewers for TI Thermal thermal: of: Remove bogus type qualifier for of_thermal_get_trip_points()
-
- 14 Jan, 2015 18 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Don't use uninitialized data in IPVS, from Dan Carpenter. 2) conntrack race fixes from Pablo Neira Ayuso. 3) Fix TX hangs with i40e, from Jesse Brandeburg. 4) Fix budget return from poll calls in dnet and alx, from Eric Dumazet. 5) Fix bugus "if (unlikely(x) < 0)" test in AF_PACKET, from Christoph Jaeger. 6) Fix bug introduced by conversion to list_head in TIPC retransmit code, from Jon Paul Maloy. 7) Don't use GFP_NOIO under spinlock in USB kaweth driver, from Alexey Khoroshilov. 8) Fix bridge build with INET disabled, from Arnd Bergmann. 9) Fix netlink array overrun for PROBE attributes in openvswitch, from Thomas Graf. 10) Don't hold spinlock across synchronize_irq() in tg3 driver, from Prashant Sreedharan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) tg3: Release tp->lock before invoking synchronize_irq() tg3: tg3_reset_task() needs to use rtnl_lock to synchronize tg3: tg3_timer() should grab tp->lock before checking for tp->irq_sync team: avoid possible underflow of count_pending value for notify_peers and mcast_rejoin openvswitch: packet messages need their own probe attribtue i40e: adds FCoE configure option cxgb4vf: Fix queue allocation for 40G adapter netdevice: Add missing parentheses in macro bridge: only provide proxy ARP when CONFIG_INET is enabled neighbour: fix base_reachable_time(_ms) not effective immediatly when changed net: fec: fix MDIO bus assignement for dual fec SoC's xen-netfront: use different locks for Rx and Tx stats drivers: net: cpsw: fix multicast flush in dual emac mode cxgb4vf: Initialize mdio_addr before using it net: Corrected the comment describing the ndo operations to reflect the actual prototype for couple of operations usb/kaweth: use GFP_ATOMIC under spin_lock in usb_start_wait_urb() MAINTAINERS: add me as ibmveth maintainer tipc: fix bug in broadcast retransmit code update ip-sysctl.txt documentation (v2) net/at91_ether: prepare and unprepare clock ...
-
David S. Miller authored
Prashant Sreedharan says: ==================== tg3: synchronize_irq() should be called without taking locks v2: Added Reported-by, Tested-by fields and reference to the thread that reported the problem This series addresses the problem reported by Peter Hurley in mail thread https://lkml.org/lkml/2015/1/12/1082 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Prashant Sreedharan authored
synchronize_irq() can sleep waiting, for pending IRQ handlers so driver should release the tp->lock spin lock before invoking synchronize_irq() Reported-by: Peter Hurley <peter@hurleysoftware.com> Tested-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Prashant Sreedharan authored
Currently tg3_reset_task() uses only tp->lock for synchronizing with code paths like tg3_open() etc. But since tp->lock is released before doing synchronize_irq(), rtnl_lock should be taken in tg3_reset_task() to synchronize it with other code paths. Reported-by: Peter Hurley <peter@hurleysoftware.com> Tested-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Prashant Sreedharan authored
This is to avoid the race between tg3_timer() and the execution paths which does not invoke tg3_timer_stop() and releases tp->lock before calling synchronize_irq() Reported-by: Peter Hurley <peter@hurleysoftware.com> Tested-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "Two bugfixes for arm64. I will have another pull request next week, but otherwise things are calm" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: arm64: KVM: Fix HCR setting for 32bit guests arm64: KVM: Fix TLB invalidation by IPA/VMID
-
Jiri Pirko authored
This patch is fixing a race condition that may cause setting count_pending to -1, which results in unwanted big bulk of arp messages (in case of "notify peers"). Consider following scenario: count_pending == 2 CPU0 CPU1 team_notify_peers_work atomic_dec_and_test (dec count_pending to 1) schedule_delayed_work team_notify_peers atomic_add (adding 1 to count_pending) team_notify_peers_work atomic_dec_and_test (dec count_pending to 1) schedule_delayed_work team_notify_peers_work atomic_dec_and_test (dec count_pending to 0) schedule_delayed_work team_notify_peers_work atomic_dec_and_test (dec count_pending to -1) Fix this race by using atomic_dec_if_positive - that will prevent count_pending running under 0. Fixes: fc423ff0 ("team: add peer notification") Fixes: 492b200e ("team: add support for sending multicast rejoins") Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Martin Schwidefsky: "Two small performance tweaks, the plumbing for the execveat system call and a couple of bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/uprobes: fix user space PER events s390/bpf: Fix JMP_JGE_X (A > X) and JMP_JGT_X (A >= X) s390/bpf: Fix ALU_NEG (A = -A) s390/mm: avoid using pmd_to_page for !USE_SPLIT_PMD_PTLOCKS s390/timex: fix get_tod_clock_ext() inline assembly s390: wire up execveat syscall s390/kernel: use stnsm 255 instead of stosm 0 s390/vtime: Get rid of redundant WARN_ON s390/zcrypt: kernel oops at insmod of the z90crypt device driver
-
Thomas Graf authored
User space is currently sending a OVS_FLOW_ATTR_PROBE for both flow and packet messages. This leads to an out-of-bounds access in ovs_packet_cmd_execute() because OVS_FLOW_ATTR_PROBE > OVS_PACKET_ATTR_MAX. Introduce a new OVS_PACKET_ATTR_PROBE with the same numeric value as OVS_FLOW_ATTR_PROBE to grow the range of accepted packet attributes while maintaining to be binary compatible with existing OVS binaries. Fixes: 05da5898 ("openvswitch: Add support for OVS_FLOW_ATTR_PROBE.") Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Tracked-down-by: Florian Westphal <fw@strlen.de> Signed-off-by: Thomas Graf <tgraf@suug.ch> Reviewed-by: Jesse Gross <jesse@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vasu Dev authored
Adds FCoE config option I40E_FCOE, so that FCoE can be enabled as needed but otherwise have it disabled by default. This also eliminate multiple FCoE config checks, instead now just one config check for CONFIG_I40E_FCOE. The I40E FCoE was added with 3.17 kernel and therefore this patch shall be applied to stable 3.17 kernel also. CC: <stable@vger.kernel.org> Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.samba.org/jlayton/linuxLinus Torvalds authored
Pull file locking fix from Jeff Layton: "Just a simple bugfix for a regression that I introduced into v3.18 with the internal lease API overhaul -- mea culpa. Kudos to Linda and Neil for tracking this down and fixing it" * tag 'locks-v3.19-1' of git://git.samba.org/jlayton/linux: locks: fix NULL-deref in generic_delete_lease
-
Benjamin Poirier authored
For example, one could conceivably call for_each_netdev_in_bond_rcu(condition ? bond1 : bond2, slave) and get an unexpected result. Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block layer fixes from Jens Axboe: "The major part is an update to the NVMe driver, fixing various issues around surprise removal and hung controllers. Most of that is from Keith, and parts are simple blk-mq fixes or exports/additions of minor functions to aid this effort, and parts are changes directly to the NVMe driver. Apart from the above, this contains: - Small blk-mq change from me, killing an unused member of the hardware queue structure. - Small fix from Ming Lei, fixing up a few drivers that didn't properly check for ERR_PTR() returns from blk_mq_init_queue()" * 'for-linus' of git://git.kernel.dk/linux-block: NVMe: Fix locking on abort handling NVMe: Start and stop h/w queues on reset NVMe: Command abort handling fixes NVMe: Admin queue removal handling NVMe: Reference count admin queue usage NVMe: Start all requests blk-mq: End unstarted requests on a dying queue blk-mq: Allow requests to never expire blk-mq: Add helper to abort requeued requests blk-mq: Let drivers cancel requeue_work blk-mq: Export if requests were started blk-mq: Wake tasks entering queue on dying blk-mq: get rid of ->cmd_size in the hardware queue block: fix checking return value of blk_mq_init_queue block: wake up waiters when a queue is marked dying NVMe: Fix double free irq blk-mq: Export freeze/unfreeze functions blk-mq: Exit queue on alloc failure
-
Arnd Bergmann authored
When IPV4 support is disabled, we cannot call arp_send from the bridge code, which would result in a kernel link error: net/built-in.o: In function `br_handle_frame_finish': :(.text+0x59914): undefined reference to `arp_send' :(.text+0x59a50): undefined reference to `arp_tbl' This makes the newly added proxy ARP support in the bridge code depend on the CONFIG_INET symbol and lets the compiler optimize the code out to avoid the link error. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 95850116 ("bridge: Add support for IEEE 802.11 Proxy ARP") Cc: Kyeyoon Park <kyeyoonp@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Zhang Rui authored
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into thermal-soc
-
Jean-Francois Remy authored
When setting base_reachable_time or base_reachable_time_ms on a specific interface through sysctl or netlink, the reachable_time value is not updated. This means that neighbour entries will continue to be updated using the old value until it is recomputed in neigh_period_work (which recomputes the value every 300*HZ). On systems with HZ equal to 1000 for instance, it means 5mins before the change is effective. This patch changes this behavior by recomputing reachable_time after each set on base_reachable_time or base_reachable_time_ms. The new value will become effective the next time the neighbour's timer is triggered. Changes are made in two places: the netlink code for set and the sysctl handling code. For sysctl, I use a proc_handler. The ipv6 network code does provide its own handler but it already refreshes reachable_time correctly so it's not an issue. Any other user of neighbour which provide its own handlers must refresh reachable_time. Signed-off-by: Jean-Francois Remy <jeff@melix.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stefan Agner authored
On i.MX28, the MDIO bus is shared between the two FEC instances. The driver makes sure that the second FEC uses the MDIO bus of the first FEC. This is done conditionally if FEC_QUIRK_ENET_MAC is set. However, in newer designs, such as Vybrid or i.MX6SX, each FEC MAC has its own MDIO bus. Simply removing the quirk FEC_QUIRK_ENET_MAC is not an option since other logic, triggered by this quirk, is still needed. Furthermore, there are board designs which use the same MDIO bus for both PHY's even though the second bus would be available on the SoC side. Such layout are popular since it saves pins on SoC side. Due to the above quirk, those boards currently do work fine. The boards in the mainline tree with such a layout are: - Freescale Vybrid Tower with TWR-SER2 (vf610-twr.dts) - Freescale i.MX6 SoloX SDB Board (imx6sx-sdb.dts) This patch adds a new quirk FEC_QUIRK_SINGLE_MDIO for i.MX28, which makes sure that the MDIO bus of the first FEC is used in any case. However, the boards above do have a SoC with a MDIO bus for each FEC instance. But the PHY's are not connected in a 1:1 configuration. A proper device tree description is needed to allow the driver to figure out where to find its PHY. This patch fixes that shortcoming by adding a MDIO bus child node to the first FEC instance, along with the two PHY's on that bus, and making use of the phy-handle property to add a reference to the PHY's. Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 13 Jan, 2015 17 commits
-
-
Linus Torvalds authored
Merge branch 'leds-fixes-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED fix from Bryan Wu. * 'leds-fixes-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: netxbig: fix oops at probe time
-
git://git.kernel.org/pub/scm/linux/kernel/git/borntraeger/linuxLinus Torvalds authored
Pull WRITE_ONCE argument order change from Christian Borntraeger: "As discussed on LKML[1] it was agreed that WRITE_ONCE(x, val) is better than ASSIGN_ONCE(val, x) Lets change that for 3.19 as 3.19 has no user yet, but the first users will hit linux-next soon" [1] http://marc.info/?l=linux-kernel&m=142081181707596 * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/borntraeger/linux: kernel: Change ASSIGN_ONCE(val, x) to WRITE_ONCE(x, val)
-
David Vrabel authored
In netfront the Rx and Tx path are independent and use different locks. The Tx lock is held with hard irqs disabled, but Rx lock is held with only BH disabled. Since both sides use the same stats lock, a deadlock may occur. [ INFO: possible irq lock inversion dependency detected ] 3.16.2 #16 Not tainted --------------------------------------------------------- swapper/0/0 just changed the state of lock: (&(&queue->tx_lock)->rlock){-.....}, at: [<c03adec8>] xennet_tx_interrupt+0x14/0x34 but this lock took another, HARDIRQ-unsafe lock in the past: (&stat->syncp.seq#2){+.-...} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&stat->syncp.seq#2); local_irq_disable(); lock(&(&queue->tx_lock)->rlock); lock(&stat->syncp.seq#2); <Interrupt> lock(&(&queue->tx_lock)->rlock); Using separate locks for the Rx and Tx stats fixes this deadlock. Reported-by: Dmitry Piotrovsky <piotrovskydmitry@gmail.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mugunthan V N authored
Since ALE table is a common resource for both the interfaces in Dual EMAC mode and while bringing up the second interface in cpsw_ndo_set_rx_mode() all the multicast entries added by the first interface is flushed out and only second interface multicast addresses are added. Fixing this by flushing multicast addresses based on dual EMAC port vlans which will not affect the other emac port multicast addresses. Fixes: d9ba8f9e (driver: net: ethernet: cpsw: dual emac interface implementation) Cc: <stable@vger.kernel.org> # v3.9+ Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Simon Guinot authored
This patch fixes a NULL pointer dereference on led_dat->mode_val. Due to this bug, a kernel oops can be observed at probe time on the LaCie 2Big and 5Big v2 boards: Unable to handle kernel NULL pointer dereference at virtual address 00000008 [...] [<c03f244c>] (netxbig_led_probe) from [<c02c8c6c>] (platform_drv_probe+0x4c/0x9c) [<c02c8c6c>] (platform_drv_probe) from [<c02c72d0>] (driver_probe_device+0x98/0x25c) [<c02c72d0>] (driver_probe_device) from [<c02c7520>] (__driver_attach+0x8c/0x90) [<c02c7520>] (__driver_attach) from [<c02c5c24>] (bus_for_each_dev+0x68/0x94) [<c02c5c24>] (bus_for_each_dev) from [<c02c6408>] (bus_add_driver+0x124/0x1dc) [<c02c6408>] (bus_add_driver) from [<c02c7ac0>] (driver_register+0x78/0xf8) [<c02c7ac0>] (driver_register) from [<c000888c>] (do_one_initcall+0x80/0x1cc) [<c000888c>] (do_one_initcall) from [<c0733618>] (kernel_init_freeable+0xe4/0x1b4) [<c0733618>] (kernel_init_freeable) from [<c058db9c>] (kernel_init+0xc/0xec) [<c058db9c>] (kernel_init) from [<c0009850>] (ret_from_fork+0x14/0x24) [...] This bug was introduced by commit 588a6a99 ("leds: netxbig: fix attribute-creation race"). Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Bryan Wu <cooloney@gmail.com>
-
Hariprasad Shenai authored
In commit 5ad24def ("cxgb4vf: Fix ethtool get_settings for VF driver") mdio_addr of port_info structure was used unininitialzed. Fixing it. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christian Borntraeger authored
Feedback has shown that WRITE_ONCE(x, val) is easier to use than ASSIGN_ONCE(val,x). There are no in-tree users yet, so lets change it for 3.19. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Davidlohr Bueso <dave@stgolabs.net> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
-
Linus Torvalds authored
Merge tag 'linux-kselftest-3.19-rc-5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "This update contains three patches to fix one compile error, and two run-time bugs. One of them fixes infinite loop on ARM" * tag 'linux-kselftest-3.19-rc-5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/vm: fix link error for transhuge-stress test tools: testing: selftests: mq_perf_tests: Fix infinite loop on ARM selftests/exec: allow shell return code of 126
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen bug fixes from David Vrabel: "Several critical linear p2m fixes that prevented some hosts from booting" * tag 'stable/for-linus-3.19-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: properly retrieve NMI reason xen: check for zero sized area when invalidating memory xen: use correct type for physical addresses xen: correct race in alloc_p2m_pmd() xen: correct error for building p2m list on 32 bits x86/xen: avoid freeing static 'name' when kasprintf() fails x86/xen: add extra memory for remapped frames during setup x86/xen: don't count how many PFNs are identity mapped x86/xen: Free bootmem in free_p2m_page() during early boot x86/xen: Remove unnecessary BUG_ON(preemptible()) in xen_setup_timer()
-
B Viswanath authored
net: Corrected the comment describing the ndo operations to reflect the actual prototype for couple of operations Corrected the comment describing the ndo operations to reflect the actual prototype for couple of operations Signed-off-by: B Viswanath <marichika4@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linuxLinus Torvalds authored
Pull thermal management fixes from Zhang Rui: "Specifics: - Fix a problem that Intel SoC DTS thermal driver does not work when CONFIG_THERMAL_INT340X is not set. - Fix a NULL pointer dereference when processor_thermal_device driver is loaded on a platform without ACPI support" * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: int340x_thermal/processor_thermal_device: return failure when ACPI/int340x_thermal: enumerate INT3401 for Intel SoC DTS thermal driver ACPI/int340x_thermal: enumerate INT340X devices even if they're not in _ART/_TRT
-
NeilBrown authored
commit 0efaa7e8 locks: generic_delete_lease doesn't need a file_lock at all moves the call to fl->fl_lmops->lm_change() to a place in the code where fl might be a non-lease lock. When that happens, fl_lmops is NULL and an Oops ensures. So add an extra test to restore correct functioning. Reported-by: Linda Walsh <suse@tlinx.org> Link: https://bugzilla.suse.com/show_bug.cgi?id=912569 Cc: stable@vger.kernel.org (v3.18) Fixes: 0efaa7e8Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Jeff Layton <jlayton@primarydata.com>
-
Jan Beulich authored
Using the native code here can't work properly, as the hypervisor would normally have cleared the two reason bits by the time Dom0 gets to see the NMI (if passed to it at all). There's a shared info field for this, and there's an existing hook to use - just fit the two together. This is particularly relevant so that NMIs intended to be handled by APEI / GHES actually make it to the respective handler. Note that the hook can (and should) be used irrespective of whether being in Dom0, as accessing port 0x61 in a DomU would be even worse, while the shared info field would just hold zero all the time. Note further that hardware NMI handling for PVH doesn't currently work anyway due to missing code in the hypervisor (but it is expected to work the native rather than the PV way). Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull gpio fixes from Linus Walleij: "Here are some GPIO fixes, mainly affecting the DLN2 IRQ handling. Nothing special about them, just fixes: - Three patches fixing IRQ handling for the DLN2 - Null pointer handling for grgpio" * tag 'gpio-v3.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: dln2: use bus_sync_unlock instead of scheduling work gpio: grgpio: Avoid potential NULL pointer dereference gpio: dln2: Fix gpio output value in dln2_gpio_direction_output() gpio: dln2: fix issue when an IRQ is unmasked then enabled
-
git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "MMC host: - sdhci-pci|acpi: Support some new IDs - sdhci: Fix sleep from atomic context - sdhci-pxav3: Prevent hang during ->probe() - sdhci: Disable re-tuning for HS400" * tag 'mmc-v3.19-3' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: sdhci-pci: Add support for Intel SPT mmc: sdhci-acpi: Add ACPI HID INT344D mmc: sdhci: Fix sleep in atomic after inserting SD card mmc: sdhci-pxav3: do the mbus window configuration after enabling clocks mmc: sdhci: Disable re-tuning for HS400 mmc: sdhci: Simplify use of tuning timer mmc: sdhci: Add out_unlock to sdhci_execute_tuning mmc: sdhci: Tuning should not change max_blk_count
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull scsi target fixes from Nicholas Bellinger: "Mostly minor fixes this time, including: - Add missing virtio-scsi -> TCM attribute conversion in vhost-scsi. - Fix persistent reservations write exclusive handling to allow readers for all registered I_T nexuses. - Drop arbitrary maximum I/O size limit in order to process I/Os larger than 4 MB, required for initiators that don't honor block limits EVPD. - Drop the now left-over fabric_max_sectors attribute" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target: Fix typos in enum cmd_flags_table MAINTAINERS: Add entry for iSER target driver target: Allow Write Exclusive non-reservation holders to READ target: Drop left-over fabric_max_sectors attribute target: Drop arbitrary maximum I/O size limit Documentation/target: Update fabric_ops to latest code vhost-scsi: Add missing virtio-scsi -> TCM attribute conversion
-
Will Deacon authored
When batching up address ranges for TLB invalidation, we check tlb->end != 0 to indicate that some pages have actually been unmapped. As of commit f045bbb9 ("mmu_gather: fix over-eager tlb_flush_mmu_free() calling"), we use the same check for freeing these pages in order to avoid a performance regression where we call free_pages_and_swap_cache even when no pages are actually queued up. Unfortunately, the range could have been reset (tlb->end = 0) by tlb_end_vma, which has been shown to cause memory leaks on arm64. Furthermore, investigation into these leaks revealed that the fullmm case on task exit no longer invalidates the TLB, by virtue of tlb->end == 0 (in 3.18, need_flush would have been set). This patch resolves the problem by reverting commit f045bbb9, using instead tlb->local.nr as the predicate for page freeing in tlb_flush_mmu_free and ensuring that tlb->end is initialised to a non-zero value in the fullmm case. Tested-by: Mark Langsdorf <mlangsdo@redhat.com> Tested-by: Dave Hansen <dave@sr71.net> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 12 Jan, 2015 2 commits
-
-
Alexey Khoroshilov authored
Commit e4c7f259 ("USB: kaweth.c: use GFP_ATOMIC under spin_lock") makes sure that kaweth_internal_control_msg() allocates memory with GFP_ATOMIC, but kaweth_internal_control_msg() also calls usb_start_wait_urb() that still allocates memory with GFP_NOIO. The patch fixes usb_start_wait_urb() as well. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Falcon authored
Adding myself as the ibmveth maintainer and replacing Santiago Leon. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Cc: Santiago Leon <santi_leon@yahoo.com> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-