- 16 Nov, 2015 1 commit
-
-
Neil Armstrong authored
As of mv88e6xxx remove the poll_link callback since the link state change polling is now handled by the phylib. Tested on a mv88e6060 B0 device with a TI DM816X SoC. Suggested-by:
Andrew Lunn <andrew@lunn.ch> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 15 Nov, 2015 24 commits
-
-
David S. Miller authored
Or Gerlitz says: ==================== Mellanox NIC driver update, Nov 12, 2015 Few small mlx5 and mlx4 fixes from the team... done over net commit c5a37883 "Merge branch 'akpm' (patches from Andrew)" Eran's patch needs to go to 4.2 and 4.3 stable kernels. Tariq's patch need to go to 4.3 stable too. ==================== Signed-off-by:
-
Noa Osherovich authored
The err variable wasn't set with the correct error value in some cases. Fixes: 47605df9 ('mlx4: Modify proxy/tunnel QP mechanism [..]') Signed-off-by:
Noa Osherovich <noaos@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Eran Ben Elisha authored
When cleaning slave's counter resources, we hold a spinlock that protects the slave's counters list. As part of the clean, we call __mlx4_clear_if_stat which calls mlx4_alloc_cmd_mailbox which is a sleepable function. In order to fix this issue, hold the spinlock, and copy all counter indices into a temporary array, and release the spinlock. Afterwards, iterate over this array and free every counter. Repeat this scenario until the original list is empty (a new counter might have been added while releasing the counters from the temporary array). Fixes: b72ca7e9 ("net/mlx4_core: Reset counters data when freed") Reported-by:
Moni Shoua <monis@mellanox.com> Tested-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
-
Achiad Shochat authored
On xmit path we use skb_frag_dma_map() which is using dma_map_page(), while upon completion we dma-unmap the skb fragments using dma_unmap_single() rather than dma_unmap_page(). To fix this, we now save the dma map type on xmit path and use this info to call the right dma unmap method upon TX completion. Signed-off-by:
Achiad Shochat <achiad@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Doron Tsur authored
On change mtu the driver compares between hardware queried mtu and software requested mtu. We need to compare between software representation of the queried mtu and the requested mtu. Fixes: facc9699 ('net/mlx5e: Fix HW MTU settings') Signed-off-by:
Doron Tsur <doront@mellanox.com> Signed-off-by:
-
Tariq Toukan authored
Prevent outgoing multicast frames from looping back to the RX queue. By introducing new HW capability self_lb_en_modifiable, which indicates the support to modify self_lb_en bit in modify_tir command. When this capability is set we can prevent TIRs from sending back loopback multicast traffic to their own RQs, by "refreshing TIRs" with modify_tir command, on every time new channels (SQs/RQs) are created at device open. This is needed since TIRs are static and only allocated once on driver load, and the loopback decision is under their responsibility. Fixes issues of the kind: "IPv6: eth2: IPv6 duplicate address fe80::e61d:2dff:fe5c:f2e9 detected!" The issue is seen since the IPv6 solicitations multicast messages are loopedback and the network stack thinks they are coming from another host. Fixes: 5c50368f ("net/mlx5e: Light-weight netdev open/stop") Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Saeed Mahameed authored
mlx5e_get_inline_hdr_size didn't take into account the vlan insertion into the inline WQE segment. This could lead to max inline violation in cases where skb_headlen(skb) + VLAN_HLEN >= sq->max_inline. Fixes: 3ea4891d ("net/mlx5e: Fix LSO vlan insertion") Signed-off-by:
-
Eric Dumazet authored
SYNACK packets might be attached to request sockets. Use skb_to_full_sk() helper to avoid illegal accesses to inet_sk(skb->sk) Fixes: ca6fb065 ("tcp: attach SYNACK messages to request sockets instead of listener") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Sander Eikelenboom <linux@eikelenboom.it> Acked-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Eric Dumazet authored
Some functions access TCP sockets without holding a lock and might output non consistent data, depending on compiler and or architecture. tcp_diag_get_info(), tcp_get_info(), tcp_poll(), get_tcp4_sock() ... Introduce sk_state_load() and sk_state_store() to fix the issues, and more clearly document where this lack of locking is happening. Signed-off-by:
-
Pavel Fedin authored
If device probe fails, driver remains bound to the PCI device. However, driver data has been reset to NULL. This causes crash upon dereferencing it in nicvf_remove() Signed-off-by:
Pavel Fedin <p.fedin@samsung.com> Signed-off-by:
-
lucien authored
now sctp auth cannot work well when setting a hmacid manually, which is caused by that we didn't use the network order for hmacid, so fix it by adding the transformation in sctp_auth_ep_set_hmacs. even we set hmacid with the network order in userspace, it still can't work, because of this condition in sctp_auth_ep_set_hmacs(): if (id > SCTP_AUTH_HMAC_ID_MAX) return -EOPNOTSUPP; so this wasn't working before and thus it won't break compatibility. Fixes: 65b07e5d ("[SCTP]: API updates to suport SCTP-AUTH extensions.") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
David S. Miller authored
Daniel Borkmann says: ==================== packet fixes Fixes a couple of issues in packet sockets, i.e. on TX ring side. See individual patches for details. v2 -> v3: - First two patches unchanged, kept Jason's Ack - Reworked 3rd patch and split into 3: - check for dev type as discussed with Willem - infer skb->protocol - fix max len for dgram v1 -> v2: - Added patch 2 as suggested by Dave - Rest is unchanged from previous submission ==================== Signed-off-by: -
Daniel Borkmann authored
Since it's introduction in commit 69e3c75f ("net: TX_RING and packet mmap"), TX_RING could be used from SOCK_DGRAM and SOCK_RAW side. When used with SOCK_DGRAM only, the size_max > dev->mtu + reserve check should have reserve as 0, but currently, this is unconditionally set (in it's original form as dev->hard_header_len). I think this is not correct since tpacket_fill_skb() would then take dev->mtu and dev->hard_header_len into account for SOCK_DGRAM, the extra VLAN_HLEN could be possible in both cases. Presumably, the reserve code was copied from packet_snd(), but later on missed the check. Make it similar as we have it in packet_snd(). Fixes: 69e3c75f ("net: TX_RING and packet mmap") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Daniel Borkmann authored
In case no struct sockaddr_ll has been passed to packet socket's sendmsg() when doing a TX_RING flush run, then skb->protocol is set to po->num instead, which is the protocol passed via socket(2)/bind(2). Applications only xmitting can go the path of allocating the socket as socket(PF_PACKET, <mode>, 0) and do a bind(2) on the TX_RING with sll_protocol of 0. That way, register_prot_hook() is neither called on creation nor on bind time, which saves cycles when there's no interest in capturing anyway. That leaves us however with po->num 0 instead and therefore the TX_RING flush run sets skb->protocol to 0 as well. Eric reported that this leads to problems when using tools like trafgen over bonding device. I.e. the bonding's hash function could invoke the kernel's flow dissector, which depends on skb->protocol being properly set. In the current situation, all the traffic is then directed to a single slave. Fix it up by inferring skb->protocol from the Ethernet header when not set and we have ARPHRD_ETHER device type. This is only done in case of SOCK_RAW and where we have a dev->hard_header_len length. In case of ARPHRD_ETHER devices, this is guaranteed to cover ETH_HLEN, and therefore being accessed on the skb after the skb_store_bits(). Reported-by:
-
Daniel Borkmann authored
Packet sockets can be used by various net devices and are not really restricted to ARPHRD_ETHER device types. However, when currently checking for the extra 4 bytes that can be transmitted in VLAN case, our assumption is that we generally probe on ARPHRD_ETHER devices. Therefore, before looking into Ethernet header, check the device type first. This also fixes the issue where non-ARPHRD_ETHER devices could have no dev->hard_header_len in TX_RING SOCK_RAW case, and thus the check would test unfilled linear part of the skb (instead of non-linear). Fixes: 57f89bfa ("network: Allow af_packet to transmit +4 bytes for VLAN packets.") Fixes: 52f1454f ("packet: allow to transmit +4 byte in TX_RING slot for VLAN case") Signed-off-by:
-
Daniel Borkmann authored
We concluded that the skb_probe_transport_header() should better be called unconditionally. Avoiding the call into the flow dissector has also not really much to do with the direct xmit mode. While it seems that only virtio_net code makes use of GSO from non RX/TX ring packet socket paths, we should probe for a transport header nevertheless before they hit devices. Reference: http://thread.gmane.org/gmane.linux.network/386173/Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Daniel Borkmann authored
In tpacket_fill_skb() commit c1aad275 ("packet: set transport header before doing xmit") and later on 40893fd0 ("net: switch to use skb_probe_transport_header()") was probing for a transport header on the skb from a ring buffer slot, but at a time, where the skb has _not even_ been filled with data yet. So that call into the flow dissector is pretty useless. Lets do it after we've set up the skb frags. Fixes: c1aad275 ("packet: set transport header before doing xmit") Reported-by:
-
Kamal Mostafa authored
Use the local uapi headers to keep in sync with "recently" added #define's (e.g. SKF_AD_VLAN_TPID). Refactored CFLAGS, and bpf_asm doesn't need -I. Fixes: 3f356385 ("filter: bpf_asm: add minimal bpf asm tool") Signed-off-by:
Kamal Mostafa <kamal@canonical.com> Acked-by:
-
David S. Miller authored
Martin KaFai Lau says: ==================== ipv6: Fixes for pmtu update and DST_NOCACHE route This patchset fixes: 1. An oops during IPv6 pmtu update on a IPv4 GRE running in an IPSec setup 2. Misc fixes on DST_NOCACHE route ==================== Signed-off-by: -
Martin KaFai Lau authored
All DST_NOCACHE rt6_info used to have rt->dst.from set to its parent. After commit 8e3d5be7 ("ipv6: Avoid double dst_free"), DST_NOCACHE is also set to rt6_info which does not have a parent (i.e. rt->dst.from is NULL). This patch catches the rt->dst.from == NULL case. Fixes: 8e3d5be7 ("ipv6: Avoid double dst_free") Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Martin KaFai Lau authored
Since the expires of the DST_NOCACHE rt can be set during the ip6_rt_update_pmtu(), we also need to consider the expires value when doing ip6_dst_check(). This patches creates __rt6_check_expired() to only check the expire value (if one exists) of the current rt. In rt6_dst_from_check(), it adds __rt6_check_expired() as one of the condition check. Signed-off-by:
-
Martin KaFai Lau authored
The original bug report: https://bugzilla.redhat.com/show_bug.cgi?id=1272571 The setup has a IPv4 GRE tunnel running in a IPSec. The bug happens when ndisc starts sending router solicitation at the gre interface. The simplified oops stack is like: __lock_acquire+0x1b2/0x1c30 lock_acquire+0xb9/0x140 _raw_write_lock_bh+0x3f/0x50 __ip6_ins_rt+0x2e/0x60 ip6_ins_rt+0x49/0x50 ~~~~~~~~ __ip6_rt_update_pmtu.part.54+0x145/0x250 ip6_rt_update_pmtu+0x2e/0x40 ~~~~~~~~ ip_tunnel_xmit+0x1f1/0xf40 __gre_xmit+0x7a/0x90 ipgre_xmit+0x15a/0x220 dev_hard_start_xmit+0x2bd/0x480 __dev_queue_xmit+0x696/0x730 dev_queue_xmit+0x10/0x20 neigh_direct_output+0x11/0x20 ip6_finish_output2+0x21f/0x770 ip6_finish_output+0xa7/0x1d0 ip6_output+0x56/0x190 ~~~~~~~~ ndisc_send_skb+0x1d9/0x400 ndisc_send_rs+0x88/0xc0 ~~~~~~~~ The rt passed to ip6_rt_update_pmtu() is created by icmp6_dst_alloc() and it is not managed by the fib6 tree, so its rt6i_table == NULL. When __ip6_rt_update_pmtu() creates a RTF_CACHE clone, the newly created clone also has rt6i_table == NULL and it causes the ip6_ins_rt() oops. During pmtu update, we only want to create a RTF_CACHE clone from a rt which is currently managed (or owned) by the fib6 tree. It means either rt->rt6i_node != NULL or rt is a RTF_PCPU clone. It is worth to note that rt6i_table may not be NULL even it is not (yet) managed by the fib6 tree (e.g. addrconf_dst_alloc()). Hence, rt6i_node is a better check instead of rt6i_table. Fixes: 45e4fd26 ("ipv6: Only create RTF_CACHE routes after encountering pmtu") Signed-off-by:
Chris Siebenmann <cks-rhbugzilla@cs.toronto.edu> Cc: Chris Siebenmann <cks-rhbugzilla@cs.toronto.edu> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Colin Ian King authored
minor change, indenting is one tab out. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by:
-
Hannes Frederic Sowa authored
During splicing an af-unix socket to a pipe we have to drop all af-unix socket locks. While doing so we allow another reader to enter unix_stream_read_generic which can read, copy and finally free another skb. If exactly this skb is just in process of being spliced we get a use-after-free report by kasan. First, we must make sure to not have a free while the skb is used during the splice operation. We simply increment its use counter before unlocking the reader lock. Stream sockets have the nice characteristic that we don't care about zero length writes and they never reach the peer socket's queue. That said, we can take the UNIXCB.consumed field as the indicator if the skb was already freed from the socket's receive queue. If the skb was fully consumed after we locked the reader side again we know it has been dropped by a second reader. We indicate a short read to user space and abort the current splice operation. This bug has been found with syzkaller (http://github.com/google/syzkaller) by Dmitry Vyukov. Fixes: 2b514574 ("net: af_unix: implement splice for stream af_unix sockets") Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
- 12 Nov, 2015 3 commits
-
-
Arnd Bergmann authored
Building dwmac-ipq806x on a 64-bit architecture produces a harmless warning from gcc: stmmac/dwmac-ipq806x.c: In function 'ipq806x_gmac_probe': include/linux/bitops.h:6:19: warning: overflow in implicit constant conversion [-Woverflow] val = QSGMII_PHY_CDR_EN | stmmac/dwmac-ipq806x.c:333:8: note: in expansion of macro 'QSGMII_PHY_CDR_EN' #define QSGMII_PHY_CDR_EN BIT(0) #define BIT(nr) (1UL << (nr)) This is a result of the type conversion rules in C, when we take the logical OR of multiple different types. In particular, we have and unsigned long QSGMII_PHY_CDR_EN == BIT(0) == (1ul << 0) == 0x0000000000000001ul and a signed int 0xC << QSGMII_PHY_TX_DRV_AMP_OFFSET == 0xc0000000 which together gives a signed long value 0xffffffffc0000001l and when this is passed into a function that takes an unsigned int type, gcc warns about the signed overflow and the loss of the upper 32-bits that are all ones. This patch adds 'ul' type modifiers to the literal numbers passed in here, so now the expression remains an 'unsigned long' with the upper bits all zero, and that avoids the signed overflow and the warning. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: b1c17215 ("stmmac: add ipq806x glue layer") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree. This large batch that includes fixes for ipset, netfilter ingress, nf_tables dynamic set instantiation and a longstanding Kconfig dependency problem. More specifically, they are: 1) Add missing check for empty hook list at the ingress hook, from Florian Westphal. 2) Input and output interface are swapped at the ingress hook, reported by Patrick McHardy. 3) Resolve ipset extension alignment issues on ARM, patch from Jozsef Kadlecsik. 4) Fix bit check on bitmap in ipset hash type, also from Jozsef. 5) Release buckets when all entries have expired in ipset hash type, again from Jozsef. 6) Oneliner to initialize conntrack tuple object in the PPTP helper, otherwise the conntrack lookup may fail due to random bits in the structure holes, patch from Anthony Lineham. 7) Silence a bogus gcc warning in nfnetlink_log, from Arnd Bergmann. 8) Fix Kconfig dependency problems with TPROXY, socket and dup, also from Arnd. 9) Add __netdev_alloc_pcpu_stats() to allow creating percpu counters from atomic context, this is required by the follow up fix for nf_tables. 10) Fix crash from the dynamic set expression, we have to add new clone operation that should be defined when a simple memcpy is not enough. This resolves a crash when using per-cpu counters with new Patrick McHardy's flow table nft support. ==================== Signed-off-by: -
françois romieu authored
Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Reported-by:
Dave Jones <davej@codemonkey.org.uk> Fixes: d7d2d89d ("r8169: Add software counter for multicast packages") Acked-by:
Corinna Vinschen <vinschen@redhat.com> Signed-off-by:
-
- 11 Nov, 2015 12 commits
-
-
Linus Torvalds authored
Merge final patch-bomb from Andrew Morton: "Various leftovers, mainly Christoph's pci_dma_supported() removals" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: pci: remove pci_dma_supported usbnet: remove ifdefed out call to dma_supported kaweth: remove ifdefed out call to dma_supported sfc: don't call dma_supported nouveau: don't call pci_dma_supported netup_unidvb: use pci_set_dma_mask insted of pci_dma_supported cx23885: use pci_set_dma_mask insted of pci_dma_supported cx25821: use pci_set_dma_mask insted of pci_dma_supported cx88: use pci_set_dma_mask insted of pci_dma_supported saa7134: use pci_set_dma_mask insted of pci_dma_supported saa7164: use pci_set_dma_mask insted of pci_dma_supported tw68-core: use pci_set_dma_mask insted of pci_dma_supported pcnet32: use pci_set_dma_mask insted of pci_dma_supported lib/string.c: add ULL suffix to the constant definition hugetlb: trivial comment fix selftests/mlock2: add ULL suffix to 64-bit constants selftests/mlock2: add missing #define _GNU_SOURCE
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuildLinus Torvalds authored
Pull misc kbuild updates from Michal Marek: "This is the non-critical part of kbuild: - several coccinelle updates - make deb-pkg creates an armhf package if CONFIG_VFP=y - make tags understands some more powerpc macros" * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: coccinelle: Improve checking for missing NULL terminators coccinelle: ifnullfree: handle various destroy functions coccinelle: ifnullfree: various cleanups cocinelle: iterators: semantic patch to delete unneeded of_node_put deb-pkg: Add automatic support for armhf architecture scripts/coccinelle: fix typos coccinelle: misc: remove "complex return code" warnings Coccinelle: fix incorrect -include option transformation coccinelle: tests: improve odd_ptr_err.cocci coccinelle: misc: move constants to the right scripts/tags.sh: Teach tags about some powerpc macros
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuildLinus Torvalds authored
Pull kconfig updates from Michal Marek: - 'make xconfig' ported to Qt5, dropping support for Qt3 - merge_config.sh supports a single-input-file mode and also respects $KCONFIG_CONFIG - Fix for incorrect display of >= and > in dependency expressions * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: (44 commits) Add current selection check. Use pkg-config to find Qt 4 and 5 instead of direct qmake kconfig: Fix copy&paste error kconfig/merge_config.sh: Accept a single file kconfig/merge_config.sh: Support KCONFIG_CONFIG Update the buildsystem for KConfig finding Qt Port xconfig to Qt5 - Update copyright. Port xconfig to Qt5 - Fix goParent issue. Port xconfig to Qt5 - on Back clicked, deselect old item. Port xconfig to Qt5 - Add(back) one click checkbox toggle. Port xconfig to Qt5 - Add(back) lineedit editing. Port xconfig to Qt5 - Remove some commented code. Port xconfig to Qt5 - Source format. Port xconfig to Qt5 - Add horizontal scrollbar, and scroll per pixel. Port xconfig to Qt5 - Change ConfigItem constructor parent type. Port xconfig to Qt5 - Disable ConfigList soring Port xconfig to Qt5 - Remove ConfigList::updateMenuList template. Port xconfig to Qt5 - Add ConfigList::mode to initializer list. Port xconfig to Qt5 - Add ConfigItem::nextItem to initializer list. Port xconfig to Qt5 - Tree widget set column titles. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuildLinus Torvalds authored
Pull kbuild update from Michal Marek: "The kbuild branch for v4.4-rc1 only has one commit: A new make kselftest-clean target cleans tools/testing/selftests" * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kselftest: add kselftest-clean rule
-
Linus Torvalds authored
Merge tag 'linux-kselftest-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates from Shuah Khan: "This 12 patch update for 4.4-rc1 consists of a new pstore test and fixes to existing tests" * tag 'linux-kselftest-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: breakpoint: Actually build it selftests: vm: Try harder to allocate huge pages selftests: Make scripts executable selftests: kprobe: Choose an always-defined function to probe selftests: memfd: Stop unnecessary rebuilds selftests: Add missing #include directives selftests/seccomp: Be more precise with syscall arguments. selftests/seccomp: build and pass on arm64 selftests: memfd_test: Revised STACK_SIZE to make it 16-byte aligned selftests/pstore: add pstore test scripts going with reboot selftests/pstore: add pstore test script for pre-reboot selftests: add .gitignore for efivarfs
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Two build fixes, one for VC4, one for nouveau where the ARM only code is doing something a bit strange. While people are discussing that, just workaround it and fix the build for now. The code in question will never get used on anything non-ARM anyways. Also one fix for AST that SuSE had been hiding in their kernel, that allows all fbdev apps to work on that driver" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau: fix build failures on all non ARM. drm/ast: Initialized data needed to map fbdev memory drm/vc4: Add dependency on HAVE_DMA_ATTRS, and select DRM_GEM_CMA_HELPER
-
Dave Airlie authored
gk20a is an ARM only GPU, so we can just do the correct thing on ARM but fail on other architectures. The other option was to use SWIOTLB as the define, which means phys_to_page exists, but this seems clearer. Signed-off-by:Dave Airlie <airlied@redhat.com>
-
Egbert Eich authored
Due to a missing initialization there was no way to map fbdev memory. Thus for example using the Xserver with the fbdev driver failed. This fix adds initialization for fix.smem_start and fix.smem_len in the fb_info structure, which fixes this problem. Requested-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: stable@vger.kernel.org Signed-off-by:
Egbert Eich <eich@suse.de> [pulled from SuSE tree by me - airlied] Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix null deref in xt_TEE netfilter module, from Eric Dumazet. 2) Several spots need to get to the original listner for SYN-ACK packets, most spots got this ok but some were not. Whilst covering the remaining cases, create a helper to do this. From Eric Dumazet. 3) Missiing check of return value from alloc_netdev() in CAIF SPI code, from Rasmus Villemoes. 4) Don't sleep while != TASK_RUNNING in macvtap, from Vlad Yasevich. 5) Use after free in mvneta driver, from Justin Maggard. 6) Fix race on dst->flags access in dst_release(), from Eric Dumazet. 7) Add missing ZLIB_INFLATE dependency for new qed driver. From Arnd Bergmann. 8) Fix multicast getsockopt deadlock, from WANG Cong. 9) Fix deadlock in btusb, from Kuba Pawlak. 10) Some ipv6_add_dev() failure paths were not cleaning up the SNMP6 counter state. From Sabrina Dubroca. 11) Fix packet_bind() race, which can cause lost notifications, from Francesco Ruggeri. 12) Fix MAC restoration in qlcnic driver during bonding mode changes, from Jarod Wilson. 13) Revert bridging forward delay change which broke libvirt and other userspace things, from Vlad Yasevich. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits) Revert "bridge: Allow forward delay to be cfgd when STP enabled" bpf_trace: Make dependent on PERF_EVENTS qed: select ZLIB_INFLATE net: fix a race in dst_release() net: mvneta: Fix memory use after free. net: Documentation: Fix default value tcp_limit_output_bytes macvtap: Resolve possible __might_sleep warning in macvtap_do_read() mvneta: add FIXED_PHY dependency net: caif: check return value of alloc_netdev net: hisilicon: NET_VENDOR_HISILICON should depend on HAS_DMA drivers: net: xgene: fix RGMII 10/100Mb mode netfilter: nft_meta: use skb_to_full_sk() helper net_sched: em_meta: use skb_to_full_sk() helper sched: cls_flow: use skb_to_full_sk() helper netfilter: xt_owner: use skb_to_full_sk() helper smack: use skb_to_full_sk() helper net: add skb_to_full_sk() helper and use it in selinux_netlbl_skbuff_setsid() bpf: doc: correct arch list for supported eBPF JIT dwc_eth_qos: Delete an unnecessary check before the function call "of_node_put" bonding: fix panic on non-ARPHRD_ETHER enslave failure ... -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block IO poll support from Jens Axboe: "Various groups have been doing experimentation around IO polling for (really) fast devices. The code has been reviewed and has been sitting on the side for a few releases, but this is now good enough for coordinated benchmarking and further experimentation. Currently O_DIRECT sync read/write are supported. A framework is in the works that allows scalable stats tracking so we can auto-tune this. And we'll add libaio support as well soon. Fow now, it's an opt-in feature for test purposes" * 'for-4.4/io-poll' of git://git.kernel.dk/linux-block: direct-io: be sure to assign dio->bio_bdev for both paths directio: add block polling support NVMe: add blk polling support block: add block polling support blk-mq: return tag/queue combo in the make_request_fn handlers block: change ->make_request_fn() and users to return a queue cookie
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull UBI/UBIFS updates from Richard Weinberger: - access time support for UBIFS by Dongsheng Yang - random cleanups and bug fixes all over the place * tag 'upstream-4.4-rc1' of git://git.infradead.org/linux-ubifs: ubifs: introduce UBIFS_ATIME_SUPPORT to ubifs ubifs: make ubifs_[get|set]xattr atomic UBIFS: Delete unnecessary checks before the function call "iput" UBI: Remove in vain semicolon UBI: Fastmap: Fix PEB array type UBIFS: Fix possible memory leak in ubifs_readdir() fs/ubifs: remove unnecessary new_valid_dev check ubi: fastmap: Implement produce_free_peb() UBIFS: print verbose message when rescanning a corrupted node UBIFS: call dbg_is_power_cut() instead of reading c->dbg->pc_happened UBI: drop null test before destroy functions UBI: Update comments to reflect UBI_METAONLY flag UBI: Fix debug message UBI: Fix typo in comment UBI: Fastmap: Simplify expression UBIFS: fix a typo in comment of ubifs_budget_req UBIFS: use kmemdup rather than duplicating its implementation
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds authored
Pull UML updates from Richard Weinberger: - a new hrtimer based clocksource by Anton Ivanov - ptrace() enhancments by Richard Weinberger - random cleanups and bug fixes all over the place * 'for-linus-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Switch clocksource to hrtimers um: net: replace GFP_KERNEL with GFP_ATOMIC when spinlock is held um: Report host OOM more nicely um: Simplify STUB_DATA loading um: Remove dead symbol from i386 syscall stub um: Remove dead code from x86_64 syscall stub um: Get rid of open coded NR_SYSCALLS um: Store syscall number after syscall_trace_enter() um: Define PTRACE_OLDSETOPTIONS
-
