- 01 May, 2013 40 commits
-
-
Vyacheslav Dubeyko authored
Change test_bit(PG_locked, &page->flags) to PageLocked(). Signed-off-by:
Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Vyacheslav Dubeyko authored
nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption The NILFS2 driver remounts itself in RO mode in the case of discovering metadata corruption (for example, discovering a broken bmap). But usually, this takes place when there have been file system operations before remounting in RO mode. Thereby, NILFS2 driver can be in RO mode with presence of dirty pages in modified inodes' address spaces. It results in flush kernel thread's infinite trying to flush dirty pages in RO mode. As a result, it is possible to see such side effects as: (1) flush kernel thread occupies 50% - 99% of CPU time; (2) system can't be shutdowned without manual power switch off. SYMPTOMS: (1) System log contains error message: "Remounting filesystem read-only". (2) The flush kernel thread occupies 50% - 99% of CPU time. (3) The system can't be shutdowned without manual power switch off. REPRODUCTION PATH: (1) Create volume group with name "unencrypted" by means of vgcreate utility. (2) Run script (prepared by Anthony Doggett <Anthony2486@interfaces.org.uk>): ----------------[BEGIN SCRIPT]-------------------- #!/bin/bash VG=unencrypted #apt-get install nilfs-tools darcs lvcreate --size 2G --name ntest $VG mkfs.nilfs2 -b 1024 -B 8192 /dev/mapper/$VG-ntest mkdir /var/tmp/n mkdir /var/tmp/n/ntest mount /dev/mapper/$VG-ntest /var/tmp/n/ntest mkdir /var/tmp/n/ntest/thedir cd /var/tmp/n/ntest/thedir sleep 2 date darcs init sleep 2 dmesg|tail -n 5 date darcs whatsnew || true date sleep 2 dmesg|tail -n 5 ----------------[END SCRIPT]-------------------- (3) Try to shutdown the system. REPRODUCIBILITY: 100% FIX: This patch implements checking mount state of NILFS2 driver in nilfs_writepage(), nilfs_writepages() and nilfs_mdt_write_page() methods. If it is detected the RO mount state then all dirty pages are simply discarded with warning messages is written in system log. [akpm@linux-foundation.org: fix printk warning] Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Anthony Doggett <Anthony2486@interfaces.org.uk> Cc: ARAI Shun-ichi <hermes@ceres.dti.ne.jp> Cc: Piotr Szymaniak <szarpaj@grubelek.pl> Cc: Zahid Chowdhury <zahid.chowdhury@starsolutions.com> Cc: Elmer Zhang <freeboy6716@gmail.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
Dan Carpenter authored
Limit the size of the copy so we don't corrupt memory. Hopefully this can only be called by root, but fixing this makes the static checkers happier. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Masanari Iida <standby24x7@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Ben Hutchings authored
Move the calls to memcpy_fromio() up into the loop in dmi_scan_machine(), and move the signature checks back down into dmi_decode(). We need to check at 16-byte intervals but keep a 32-byte buffer for an SMBIOS entry, so shift the buffer after each iteration. Merge smbios_present() into dmi_present(), so we look for an SMBIOS signature at the beginning of the given buffer and then for a DMI signature at an offset of 16 bytes. [artem.savkov@gmail.com: use proper buf type in dmi_present()] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Reported-by:
Tim McGrath <tmhikaru@gmail.com> Tested-by:
Artem Savkov <artem.savkov@gmail.com> Signed-off-by:
-
Jiri Kosina authored
The comment I originally added in commit a3defbe5 ("binfmt_elf: fix PIE execution with randomization disabled") is not really 100% accurate -- sysctl is not the only way how PF_RANDOMIZE could be forcibly unset in runtime. Another option of course is direct modification of personality flags (i.e. running through setarch wrapper). Make the comment more explicit and accurate. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Josh Triplett authored
Add a new configuration option CONFIG_BINFMT_SCRIPT to configure support for interpreted scripts starting with "#!"; allow compiling out that support, or building it as a module. Embedded systems running exclusively compiled binaries could leave this support out, and systems that don't need scripts before mounting the root filesystem can build this as a module. Signed-off-by:
Josh Triplett <josh@joshtriplett.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Eric Wong authored
It is always safe to use RCU_INIT_POINTER to NULL a pointer. This results in slightly smaller/faster code. Signed-off-by:
Eric Wong <normalperson@yhbt.net> Signed-off-by:
-
Eric Wong authored
This reduces the amount of code inside the ready list iteration loops for better readability IMHO. Signed-off-by:
-
Eric Wong authored
Technically we do not need to hold ep->mtx during ep_free since we are certain there are no other users of ep at that point. However, lockdep complains with a "suspicious rcu_dereference_check() usage!" message; so lock the mutex before ep_remove to silence the warning. Signed-off-by:
-
Eric Wong authored
This prevents wakeup_source destruction when a user hits the item with EPOLL_CTL_MOD while ep_poll_callback is running. Tested with CONFIG_SPARSE_RCU_POINTER=y and "make fs/eventpoll.o C=2" Signed-off-by:
-
Eric Wong authored
It is common for epoll users to have thousands of epitems, so saving a cache line on every allocation leads to large memory savings. Since epitem allocations are cache-aligned, reducing sizeof(struct epitem) from 136 bytes to 128 bytes will allow it to squeeze under a cache line boundary on x86_64. Via /sys/kernel/slab/eventpoll_epi, I see the following changes on my x86_64 Core2 Duo (which has 64-byte cache alignment): object_size : 192 => 128 objs_per_slab: 21 => 32 Also, add a BUILD_BUG_ON() to check for future accidental breakage. [akpm@linux-foundation.org: use __packed, for all architectures] Signed-off-by:
-
Stephen Rothwell authored
Andrew Morton noted: akpm3:/usr/src/25> grep SYSCALL kernel/timer.c SYSCALL_DEFINE1(alarm, unsigned int, seconds) SYSCALL_DEFINE0(getpid) SYSCALL_DEFINE0(getppid) SYSCALL_DEFINE0(getuid) SYSCALL_DEFINE0(geteuid) SYSCALL_DEFINE0(getgid) SYSCALL_DEFINE0(getegid) SYSCALL_DEFINE0(gettid) SYSCALL_DEFINE1(sysinfo, struct sysinfo __user *, info) COMPAT_SYSCALL_DEFINE1(sysinfo, struct compat_sysinfo __user *, info) Only one of those should be in kernel/timer.c. Who wrote this thing? [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
-
Stephen Rothwell authored
The only use outside of kernel/timer.c was in kernel/compat.c, so move compat_sys_sysinfo() next to sys_sysinfo() in kernel/timer.c. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Andy Shevchenko authored
There is string_unescape_inplace() function which decodes strings in generic way. Let's use it. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Signed-off-by:
-
Andy Shevchenko authored
There is kernel function to do the job in generic way. Let's use it. Signed-off-by:
-
Andy Shevchenko authored
There is generic implementation of the function to unescape strings. Signed-off-by:
-
Andy Shevchenko authored
There are several places in kernel where modules unescapes input to convert C-Style Escape Sequences into byte codes. The patch provides generic implementation of such approach. Test cases are also included into the patch. [akpm@linux-foundation.org: clarify comment] [akpm@linux-foundation.org: export get_random_int() to modules] Signed-off-by:
-
Andrew Morton authored
We sometimes use "struct call_single_data *data" and sometimes "struct call_single_data *csd". Use "csd" consistently. We sometimes use "struct call_function_data *data" and sometimes "struct call_function_data *cfd". Use "cfd" consistently. Also, avoid some 80-col layout tricks. Cc: Ingo Molnar <mingo@elte.hu> Cc: Jens Axboe <axboe@kernel.dk> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Shaohua Li <shli@fusionio.com> Cc: Shaohua Li <shli@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Fan Du authored
Two rt tasks bind to one CPU core. The higher priority rt task A preempts a lower priority rt task B which has already taken the write seq lock, and then the higher priority rt task A try to acquire read seq lock, it's doomed to lockup. rt task A with lower priority: call write i_size_write rt task B with higher priority: call sync, and preempt task A write_seqcount_begin(&inode->i_size_seqcount); i_size_read inode->i_size = i_size; read_seqcount_begin <-- lockup here... So disable preempt when acquiring every i_size_seqcount *write* lock will cure the problem. Signed-off-by:
Fan Du <fan.du@windriver.com> Signed-off-by:
-
liguang authored
The 'priv' field is redundant; we can pass data via 'info'. Signed-off-by:
liguang <lig.fnst@cn.fujitsu.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
liguang authored
csd_lock() uses assignment to data->flags rather than |=. That is not buggy at present because only one bit (CSD_FLAG_LOCK) is defined in call_single_data.flags. But it will become buggy if we later add another flag, so fix it now. Signed-off-by:
-
Tejun Heo authored
Writeback has been recently converted to use workqueue instead of its private thread pool implementation. One negative side effect of this conversion is that there's no easy to tell which backing device a writeback work item was working on at the time of task dump, be it sysrq-t, BUG, WARN or whatever, which, according to our writeback brethren, is important in tracking down issues with a lot of mounted file systems on a lot of different devices. This patch restores that information using the new worker description facility. bdi_writeback_workfn() calls set_work_desc() to identify which bdi it's working on. The description is printed out together with the worqueue name and worker function as in the following example dump. WARNING: at fs/fs-writeback.c:1015 bdi_writeback_workfn+0x2b4/0x3c0() Modules linked in: Pid: 28, comm: kworker/u18:0 Not tainted 3.9.0-rc1-work+ #24 empty empty/S3992 Workqueue: writeback bdi_writeback_workfn (flush-8:16) ffffffff820a3a98 ffff88015b927cb8 ffffffff81c61855 ffff88015b927cf8 ffffffff8108f500 0000000000000000 ffff88007a171948 ffff88007a1716b0 ffff88015b49df00 ffff88015b8d3940 0000000000000000 ffff88015b927d08 Call Trace: [<ffffffff81c61855>] dump_stack+0x19/0x1b [<ffffffff8108f500>] warn_slowpath_common+0x70/0xa0 [<ffffffff8108f54a>] warn_slowpath_null+0x1a/0x20 [<ffffffff81200144>] bdi_writeback_workfn+0x2b4/0x3c0 [<ffffffff810b4c87>] process_one_work+0x1d7/0x660 [<ffffffff810b5c72>] worker_thread+0x122/0x380 [<ffffffff810bdfea>] kthread+0xea/0xf0 [<ffffffff81c6cedc>] ret_from_fork+0x7c/0xb0 Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Tejun Heo authored
One of the problems that arise when converting dedicated custom threadpool to workqueue is that the shared worker pool used by workqueue anonimizes each worker making it more difficult to identify what the worker was doing on which target from the output of sysrq-t or debug dump from oops, BUG() and friends. This patch implements set_worker_desc() which can be called from any workqueue work function to set its description. When the worker task is dumped for whatever reason - sysrq-t, WARN, BUG, oops, lockdep assertion and so on - the description will be printed out together with the workqueue name and the worker function pointer. The printing side is implemented by print_worker_info() which is called from functions in task dump paths - sched_show_task() and dump_stack_print_info(). print_worker_info() can be safely called on any task in any state as long as the task struct itself is accessible. It uses probe_*() functions to access worker fields. It may print garbage if something went very wrong, but it wouldn't cause (another) oops. The description is currently limited to 24bytes including the terminating \0. worker->desc_valid and workder->desc[] are added and the 64 bytes marker which was already incorrect before adding the new fields is moved to the correct position. Here's an example dump with writeback updated to set the bdi name as worker desc. Hardware name: Bochs Modules linked in: Pid: 7, comm: kworker/u9:0 Not tainted 3.9.0-rc1-work+ #1 Workqueue: writeback bdi_writeback_workfn (flush-8:0) ffffffff820a3ab0 ffff88000f6e9cb8 ffffffff81c61845 ffff88000f6e9cf8 ffffffff8108f50f 0000000000000000 0000000000000000 ffff88000cde16b0 ffff88000cde1aa8 ffff88001ee19240 ffff88000f6e9fd8 ffff88000f6e9d08 Call Trace: [<ffffffff81c61845>] dump_stack+0x19/0x1b [<ffffffff8108f50f>] warn_slowpath_common+0x7f/0xc0 [<ffffffff8108f56a>] warn_slowpath_null+0x1a/0x20 [<ffffffff81200150>] bdi_writeback_workfn+0x2a0/0x3b0 ... Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Tejun Heo authored
One of the problems that arise when converting dedicated custom threadpool to workqueue is that the shared worker pool used by workqueue anonimizes each worker making it more difficult to identify what the worker was doing on which target from the output of sysrq-t or debug dump from oops, BUG() and friends. For example, after writeback is converted to use workqueue instead of priviate thread pool, there's no easy to tell which backing device a writeback work item was working on at the time of task dump, which, according to our writeback brethren, is important in tracking down issues with a lot of mounted file systems on a lot of different devices. This patchset implements a way for a work function to mark its execution instance so that task dump of the worker task includes information to indicate what the work item was doing. An example WARN dump would look like the following. WARNING: at fs/fs-writeback.c:1015 bdi_writeback_workfn+0x2b4/0x3c0() Modules linked in: CPU: 0 Pid: 28 Comm: kworker/u18:0 Not tainted 3.9.0-rc1-work+ #24 Hardware name: empty empty/S3992, BIOS 080011 10/26/2007 Workqueue: writeback bdi_writeback_workfn (flush-8:16) ffffffff820a3a98 ffff88015b927cb8 ffffffff81c61855 ffff88015b927cf8 ffffffff8108f500 0000000000000000 ffff88007a171948 ffff88007a1716b0 ffff88015b49df00 ffff88015b8d3940 0000000000000000 ffff88015b927d08 Call Trace: [<ffffffff81c61855>] dump_stack+0x19/0x1b [<ffffffff8108f500>] warn_slowpath_common+0x70/0xa0 ... This patch: Implement probe_kthread_data() which returns kthread_data if accessible. The function is equivalent to kthread_data() except that the specified @task may not be a kthread or its vfork_done is already cleared rendering struct kthread inaccessible. In the former case, probe_kthread_data() may return any value. In the latter, NULL. This will be used to safely print debug information without affecting synchronization in the normal paths. Workqueue debug info printing on dump_stack() and friends will make use of it. Signed-off-by:
-
Vineet Gupta authored
After the recent generic debug info on dump_stack() and friends, arc is printing duplicate information on debug dumps. [ARCLinux]$ ./crash crash/50: potentially unexpected fatal signal 11. <-- [1] /sbin/crash, TGID 50 <-- [2] Pid: 50, comm: crash Not tainted 3.9.0-rc4+ #132 <-- [3] ... Remove them. [tj@kernel.org: updated patch desc] Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Tejun Heo authored
show_regs() is inherently arch-dependent but it does make sense to print generic debug information and some archs already do albeit in slightly different forms. This patch introduces a generic function to print debug information from show_regs() so that different archs print out the same information and it's much easier to modify what's printed. show_regs_print_info() prints out the same debug info as dump_stack() does plus task and thread_info pointers. * Archs which didn't print debug info now do. alpha, arc, blackfin, c6x, cris, frv, h8300, hexagon, ia64, m32r, metag, microblaze, mn10300, openrisc, parisc, score, sh64, sparc, um, xtensa * Already prints debug info. Replaced with show_regs_print_info(). The printed information is superset of what used to be there. arm, arm64, avr32, mips, powerpc, sh32, tile, unicore32, x86 * s390 is special in that it used to print arch-specific information along with generic debug info. Heiko and Martin think that the arch-specific extra isn't worth keeping s390 specfic implementation. Converted to use the generic version. Note that now all archs print the debug info before actual register dumps. An example BUG() dump follows. kernel BUG at /work/os/work/kernel/workqueue.c:4841! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #7 Hardware name: empty empty/S3992, BIOS 080011 10/26/2007 task: ffff88007c85e040 ti: ffff88007c860000 task.ti: ffff88007c860000 RIP: 0010:[<ffffffff8234a07e>] [<ffffffff8234a07e>] init_workqueues+0x4/0x6 RSP: 0000:ffff88007c861ec8 EFLAGS: 00010246 RAX: ffff88007c861fd8 RBX: ffffffff824466a8 RCX: 0000000000000001 RDX: 0000000000000046 RSI: 0000000000000001 RDI: ffffffff8234a07a RBP: ffff88007c861ec8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff8234a07a R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff88015f7ff000 CR3: 00000000021f1000 CR4: 00000000000007f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88007c861ef8 ffffffff81000312 ffffffff824466a8 ffff88007c85e650 0000000000000003 0000000000000000 ffff88007c861f38 ffffffff82335e5d ffff88007c862080 ffffffff8223d8c0 ffff88007c862080 ffffffff81c47760 Call Trace: [<ffffffff81000312>] do_one_initcall+0x122/0x170 [<ffffffff82335e5d>] kernel_init_freeable+0x9b/0x1c8 [<ffffffff81c47760>] ? rest_init+0x140/0x140 [<ffffffff81c4776e>] kernel_init+0xe/0xf0 [<ffffffff81c6be9c>] ret_from_fork+0x7c/0xb0 [<ffffffff81c47760>] ? rest_init+0x140/0x140 ... v2: Typo fix in x86-32. v3: CPU number dropped from show_regs_print_info() as dump_stack_print_info() has been updated to print it. s390 specific implementation dropped as requested by s390 maintainers. Signed-off-by:David S. Miller <davem@davemloft.net> Acked-by:
Jesper Nilsson <jesper.nilsson@axis.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Chris Metcalf <cmetcalf@tilera.com> [tile bits] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon bits] Signed-off-by:
-
Tejun Heo authored
x86 and ia64 can acquire extra hardware identification information from DMI and print it along with task dumps; however, the usage isn't consistent. * x86 show_regs() collects vendor, product and board strings and print them out with PID, comm and utsname. Some of the information is printed again later in the same dump. * warn_slowpath_common() explicitly accesses the DMI board and prints it out with "Hardware name:" label. This applies to both x86 and ia64 but is irrelevant on all other archs. * ia64 doesn't show DMI information on other non-WARN dumps. This patch introduces arch-specific hardware description used by dump_stack(). It can be set by calling dump_stack_set_arch_desc() during boot and, if exists, printed out in a separate line with "Hardware name:" label. dmi_set_dump_stack_arch_desc() is added which sets arch-specific description from DMI data. It uses dmi_ids_string[] which is set from dmi_present() used for DMI debug message. It is superset of the information x86 show_regs() is using. The function is called from x86 and ia64 boot code right after dmi_scan_machine(). This makes the explicit DMI handling in warn_slowpath_common() unnecessary. Removed. show_regs() isn't yet converted to use generic debug information printing and this patch doesn't remove the duplicate DMI handling in x86 show_regs(). The next patch will unify show_regs() handling and remove the duplication. An example WARN dump follows. WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505() Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #3 Hardware name: empty empty/S3992, BIOS 080011 10/26/2007 0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48 ffffffff8108f500 ffffffff82228240 0000000000000040 ffffffff8234a08e 0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58 Call Trace: [<ffffffff81c614dc>] dump_stack+0x19/0x1b [<ffffffff8108f500>] warn_slowpath_common+0x70/0xa0 [<ffffffff8108f54a>] warn_slowpath_null+0x1a/0x20 [<ffffffff8234a0c3>] init_workqueues+0x35/0x505 ... v2: Use the same string as the debug message from dmi_present() which also contains BIOS information. Move hardware name into its own line as warn_slowpath_common() did. This change was suggested by Bjorn Helgaas. Signed-off-by: -
Tejun Heo authored
We're goning to use DMI identification for other purposes too. Morph dmi_dump_ids() which is used to print DMI identification as a debug message during boot into dmi_format_ids() which formats the same information sans the leading "DMI:" tag into a string buffer. dmi_present() is updated to format the information into dmi_ids_string[] using the new function and print it with "DMI:" prefix. dmi_ids_string[] will be used for another purpose by a future patch. Signed-off-by:
-
Tejun Heo authored
Both dump_stack() and show_stack() are currently implemented by each architecture. show_stack(NULL, NULL) dumps the backtrace for the current task as does dump_stack(). On some archs, dump_stack() prints extra information - pid, utsname and so on - in addition to the backtrace while the two are identical on other archs. The usages in arch-independent code of the two functions indicate show_stack(NULL, NULL) should print out bare backtrace while dump_stack() is used for debugging purposes when something went wrong, so it does make sense to print additional information on the task which triggered dump_stack(). There's no reason to require archs to implement two separate but mostly identical functions. It leads to unnecessary subtle information. This patch expands the dummy fallback dump_stack() implementation in lib/dump_stack.c such that it prints out debug information (taken from x86) and invokes show_stack(NULL, NULL) and drops arch-specific dump_stack() implementations in all archs except blackfin. Blackfin's dump_stack() does something wonky that I don't understand. Debug information can be printed separately by calling dump_stack_print_info() so that arch-specific dump_stack() implementation can still emit the same debug information. This is used in blackfin. This patch brings the following behavior changes. * On some archs, an extra level in backtrace for show_stack() could be printed. This is because the top frame was determined in dump_stack() on those archs while generic dump_stack() can't do that reliably. It can be compensated by inlining dump_stack() but not sure whether that'd be necessary. * Most archs didn't use to print debug info on dump_stack(). They do now. An example WARN dump follows. WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505() Hardware name: empty Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #9 0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48 ffffffff8108f50f ffffffff82228240 0000000000000040 ffffffff8234a03c 0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58 Call Trace: [<ffffffff81c614dc>] dump_stack+0x19/0x1b [<ffffffff8108f50f>] warn_slowpath_common+0x7f/0xc0 [<ffffffff8108f56a>] warn_slowpath_null+0x1a/0x20 [<ffffffff8234a071>] init_workqueues+0x35/0x505 ... v2: CPU number added to the generic debug info as requested by s390 folks and dropped the s390 specific dump_stack(). This loses %ksp from the debug message which the maintainers think isn't important enough to keep the s390-specific dump_stack() implementation. dump_stack_print_info() is moved to kernel/printk.c from lib/dump_stack.c. Because linkage is per objecct file, dump_stack_print_info() living in the same lib file as generic dump_stack() means that archs which implement custom dump_stack() - at this point, only blackfin - can't use dump_stack_print_info() as that will bring in the generic version of dump_stack() too. v1 The v1 patch broke build on blackfin due to this issue. The build breakage was reported by Fengguang Wu. Signed-off-by: -
Tejun Heo authored
show_stack(current or NULL, NULL) is used by arch-independent code to dump backtrace of the current task; however, sparc32 show_stack() doesn't implement it and wouldn't print any backtrace when NULL @_ksp is specfied. Make show_stack() acquire and use %fp if @tsk is NULL or current and @_ksp is NULL. This makes %fp fetching in dump_stack() unnecessary. Make it use NULL for @_ksp instead. Only compile tested. Signed-off-by:
-
Tejun Heo authored
There are multiple ways a task can be dumped - explicit call to dump_stack(), triggering WARN() or BUG(), through sysrq-t and so on. Most of what gets printed is upto each architecture and the current state is not particularly pretty. Different pieces of information are presented differently depending on which path the dump takes and which architecture it's running on. This is messy for no good reason and makes it exceedingly difficult to add or modify debug information to task dumps. In all archs except for s390, there's nothing arch-specific about the printed debug information. This patchset updates all those archs to use the same helpers to consistently print out the same debug information. An example WARN dump after this patchset. WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505() Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #3 Hardware name: empty empty/S3992, BIOS 080011 10/26/2007 0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48 ffffffff8108f500 ffffffff82228240 0000000000000040 ffffffff8234a08e 0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58 Call Trace: [<ffffffff81c614dc>] dump_stack+0x19/0x1b [<ffffffff8108f500>] warn_slowpath_common+0x70/0xa0 [<ffffffff8108f54a>] warn_slowpath_null+0x1a/0x20 [<ffffffff8234a0c3>] init_workqueues+0x35/0x505 ... And BUG dump. kernel BUG at kernel/workqueue.c:4841! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #7 Hardware name: empty empty/S3992, BIOS 080011 10/26/2007 task: ffff88007c85e040 ti: ffff88007c860000 task.ti: ffff88007c860000 RIP: 0010:[<ffffffff8234a07e>] [<ffffffff8234a07e>] init_workqueues+0x4/0x6 RSP: 0000:ffff88007c861ec8 EFLAGS: 00010246 RAX: ffff88007c861fd8 RBX: ffffffff824466a8 RCX: 0000000000000001 RDX: 0000000000000046 RSI: 0000000000000001 RDI: ffffffff8234a07a RBP: ffff88007c861ec8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff8234a07a R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff88015f7ff000 CR3: 00000000021f1000 CR4: 00000000000007f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88007c861ef8 ffffffff81000312 ffffffff824466a8 ffff88007c85e650 0000000000000003 0000000000000000 ffff88007c861f38 ffffffff82335e5d ffff88007c862080 ffffffff8223d8c0 ffff88007c862080 ffffffff81c47760 Call Trace: [<ffffffff81000312>] do_one_initcall+0x122/0x170 [<ffffffff82335e5d>] kernel_init_freeable+0x9b/0x1c8 [<ffffffff81c47760>] ? rest_init+0x140/0x140 [<ffffffff81c4776e>] kernel_init+0xe/0xf0 [<ffffffff81c6be9c>] ret_from_fork+0x7c/0xb0 [<ffffffff81c47760>] ? rest_init+0x140/0x140 ... This patchset contains the following seven patches. 0001-x86-don-t-show-trace-beyond-show_stack-NULL-NULL.patch 0002-sparc32-make-show_stack-acquire-fp-if-_ksp-is-not-sp.patch 0003-dump_stack-consolidate-dump_stack-implementations-an.patch 0004-dmi-morph-dmi_dump_ids-into-dmi_format_ids-which-for.patch 0005-dump_stack-implement-arch-specific-hardware-descript.patch 0006-dump_stack-unify-debug-information-printed-by-show_r.patch 0007-arc-print-fatal-signals-reduce-duplicated-informatio.patch 0001-0002 update stack dumping functions in x86 and sparc32 in preparation. 0003 makes all arches except blackfin use generic dump_stack(). blackfin still uses the generic helper to print the same info. 0004-0005 properly abstract DMI identifier printing in WARN() and show_regs() so that all dumps print out the information. This enables show_regs() to use the same debug info message. 0006 updates show_regs() of all arches to use a common generic helper to print debug info. 0007 removes somem duplicate information from arc dumps. While this patchset changes how debug info is printed on some archs, the printed information is always superset of what used to be there. This patchset makes task dump debug messages consistent and enables adding more information. Workqueue is scheduled to add worker information including the workqueue in use and work item specific description. While this patch touches a lot of archs, it isn't too likely to cause non-trivial conflicts with arch-specfic changes and would probably be best to route together either through -mm. x86 is tested but other archs are either only compile tested or not tested at all. Changes to most archs are generally trivial. This patch: show_stack(current or NULL, NULL) is used to print the backtrace of the current task. As trace beyond the function itself isn't of much interest to anyone, don't show it by determining sp and bp in show_stack()'s frame and passing them to show_stack_log_lvl(). This brings show_stack(NULL, NULL)'s behavior in line with dump_stack(). Signed-off-by:
-
Lin Feng authored
Also replace deprecated printk(KERN_ERR...) with pr_err() as suggested by Yinghai, attaching the function name to provide plenty info. Signed-off-by:
Lin Feng <linfeng@cn.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
Pavel Emelyanov authored
It creates a mapping of 3 pages and checks that reads, writes and clear-refs result in present and soft-dirt bits reported from pagemap2 set as expected. [akpm@linux-foundation.org: alphasort the Makefile TARGETS to reduce rejects] Signed-off-by:
Pavel Emelyanov <xemul@parallels.com> Signed-off-by:
-
Dan Magenheimer authored
Allow zcache to be built/loaded as a module. Note runtime dependency disallows loading if cleancache/frontswap lazy initialization patches are not present. Zsmalloc support has not yet been merged into zcache but, once merged, could now easily be selected via a module_param. If built-in (not built as a module), the original mechanism of enabling via a kernel boot parameter is retained, but this should be considered deprecated. Note that module unload is explicitly not yet supported. Signed-off-by:
Dan Magenheimer <dan.magenheimer@oracle.com> [v1: Rebased with different order of patches] [v2: Removed [CLEANCACHE|FRONTSWAP]_HAS_LAZY_INIT ifdef] [v3: Rebased on top of ramster->zcache move] [v4: Redid the Makefile] [v5: s/ZCACHE2/ZCACHE/] Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
Bob Liu <lliubbo@gmail.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Andor Daam <andor.daam@googlemail.com> Cc: Florian Schmaus <fschmaus@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Stefan Hengelein <ilendir@googlemail.com> Signed-off-by:
-
Dan Magenheimer authored
Enable module support for ramster. Note runtime dependency disallows loading if cleancache/frontswap lazy initialization patches are not present. If built-in (not built as a module), the original mechanism of enabling via a kernel boot parameter is retained, but this should be considered deprecated. Note that module unload is explicitly not yet supported. [v1: Fixed compile issues since ramster_init now has four arguments] [v2: Fixed rebase on ramster->zcache move] [akpm@linux-foundation.org: use_frontswap_selfshrink cannot be __initdata] Signed-off-by:
-
Konrad Rzeszutek Wilk authored
In the past it either used to be NULL or the "older" backend. Now we also return -Exx error codes. Signed-off-by:
-
Dan Magenheimer authored
Allow Xen tmem shim to be built/loaded as a module. Xen self-ballooning and frontswap-selfshrinking are now also "lazily" initialized when the Xen tmem shim is loaded as a module, unless explicitly disabled by module parameters. Note runtime dependency disallows loading if cleancache/frontswap lazy initialization patches are not present. If built-in (not built as a module), the original mechanism of enabling via a kernel boot parameter is retained, but this should be considered deprecated. Note that module unload is explicitly not yet supported. [v1: Removed the [CLEANCACHE|FRONTSWAP]_HAS_LAZY_INIT ifdef] [v2: Squashed the xen/tmem: Remove the subsys call patch in] [akpm@linux-foundation.org: fix build (disable_frontswap_selfshrinking undeclared)] Signed-off-by:
-
Bob Liu authored
cleancache_ops is used to decide whether backend is registered. So now cleancache_enabled is always true if defined CONFIG_CLEANCACHE. Signed-off-by:
-
Konrad Rzeszutek Wilk authored
Instead of using a backend_registered to determine whether a backend is enabled. This allows us to remove the backend_register check and just do 'if (cleancache_ops)' [v1: Rebase on top of b97c4b430b0a (ramster->zcache move] Signed-off-by:
-
