Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove all the volatile keywords where they were used, switch to using the
proper readl/writel accessors.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace asm/io.h and asm/cpu.h wih linux/io.h and linux/cpu.h
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use pr_(info|err) and pr_cont where required instead of calls to printk.
Add missing pr_fmt to the driver.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

One line has not been changed because it would not improve readability.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the following checkpatch.pl warnings:
- spaces after tabs
- space between function and arguments
- one-line statement braces
- tabs instead of spaces
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove code that trimmed excess trailing info from incoming messages
arriving over an Ethernet interface.  TIPC now ignores the extra info
while the message is being processed by the node, and only trims it off
if the message is retransmitted to another node.  (This latter step is
done to ensure the extra info doesn't cause the sk_buff to exceed the
outgoing interface's MTU limit.) The outgoing buffer is guaranteed to
be linear.
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the net_device provided net_device_stats structure.

Remove ixgbevf_get_stats() now its not needed.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

xfrm4_tunnel_register() & xfrm6_tunnel_register() should
use rcu_assign_pointer() to make sure previous writes
(to handler->next) are committed to memory before chain
insertion.

deregister functions dont need a particular barrier.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

__lock_sock() and __release_sock() releases and regrabs lock but
were missing proper annotations. Add it. This removes following
warning from sparse. (Currently __lock_sock() does not emit any
warning about it but I think it is better to add also.)

 net/core/sock.c:1580:17: warning: context imbalance in '__release_sock' - unexpected unlock
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

move_addr_to_kernel() and copy_from_user() requires their argument
as __user pointer but were missing proper markups. Add it.
This removes following warnings from sparse.

 net/core/iovec.c:44:52: warning: incorrect type in argument 1 (different address spaces)
 net/core/iovec.c:44:52:    expected void [noderef] <asn:1>*uaddr
 net/core/iovec.c:44:52:    got void *msg_name
 net/core/iovec.c:55:34: warning: incorrect type in argument 2 (different address spaces)
 net/core/iovec.c:55:34:    expected void const [noderef] <asn:1>*from
 net/core/iovec.c:55:34:    got struct iovec *msg_iov
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Chris Snook <chris.snook@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use cmpxchg() to get rid of spinlocks in inet_add_protocol() and
friends.

inet_protos[] & inet6_protos[] are moved to read_mostly section
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ignore ADSL routers, which can have the same vendor and product IDs
as ADSL modems but should be handled by the cx82310_eth driver.

This intentionally ignores device IDs that aren't currently handled
by cx82310_eth. There may be other device IDs that perhaps shouldn't
be claimed by cxacru.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

flows are an obsolete date type.
Signed-off-by: Andy Grover <andy.grover@oracle.com>

Replace e.g. u_int32_t types with the more common uint32_t.
Reported-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Andy Grover <andy.grover@oracle.com>

Also, a number of changes were made based on the assumption that
rds.h wasn't exported, so roll these back.
Signed-off-by: Andy Grover <andy.grover@oracle.com>

Add two CMSGs for masked versions of cswp and fadd. args
struct modified to use a union for different atomic op type's
arguments. Change IB to do masked atomic ops. Atomic op type
in rds_message similarly unionized.
Signed-off-by: Andy Grover <andy.grover@oracle.com>

This prints the constant identifier for work completion status and rdma
cm event types, like we already do for IB event types.

A core string array helper is added that each string type uses.
Signed-off-by: Zach Brown <zach.brown@oracle.com>

Nothing was canceling the send and receive work that might have been
queued as a conn was being destroyed.
Signed-off-by: Zach Brown <zach.brown@oracle.com>

rds_conn_shutdown() can return before the connection is shut down when
it encounters an existing state that it doesn't understand.  This lets
rds_conn_destroy() then start tearing down the conn from under paths
that are still using it.

It's more reliable the shutdown work and wait for krdsd to complete the
shutdown callback.  This stopped some hangs I was seeing where krdsd was
trying to shut down a freed conn.
Signed-off-by: Zach Brown <zach.brown@oracle.com>

Right now there's nothing to stop the various paths that use
rs->rs_transport from racing with rmmod and executing freed transport
code.  The simple fix is to have binding to a transport also hold a
reference to the transport's module, removing this class of races.

We already had an unused t_owner field which was set for the modular
transports and which wasn't set for the built-in loop transport.
Signed-off-by: Zach Brown <zach.brown@oracle.com>

rs_transport is now also used by the rdma paths once the socket is
bound.  We don't need this stale comment to tell us what cscope can.
Signed-off-by: Zach Brown <zach.brown@oracle.com>

rds_conn_destroy() can race with all other modifications of the
rds_conn_count but it was modifying the count without locking.
Signed-off-by: Zach Brown <zach.brown@oracle.com>

The RDS IB device list wasn't protected by any locking.  Traversal in
both the get_mr and FMR flushing paths could race with additon and
removal.

List manipulation is done with RCU primatives and is protected by the
write side of a rwsem.  The list traversal in the get_mr fast path is
protected by a rcu read critical section.  The FMR list traversal is
more problematic because it can block while traversing the list.  We
protect this with the read side of the rwsem.
Signed-off-by: Zach Brown <zach.brown@oracle.com>

It's nice to not have to go digging in the code to see which event
occurred.  It's easy to throw together a quick array that maps the ib
event enums to their strings.  I didn't see anything in the stack that
does this translation for us, but I also didn't look very hard.
Signed-off-by: Zach Brown <zach.brown@oracle.com>

Flushing FMRs is somewhat expensive, and is currently kicked off when
the interrupt handler notices that we are getting low.  The result of
this is that FMR flushing only happens from the interrupt cpus.

This spreads the load more effectively by triggering flushes just before
we allocate a new FMR.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

This is only needed to keep debugging code from bugging.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

We're seeing bugs today where IB connection shutdown clears the send
ring while the tasklet is processing completed sends.  Implementation
details cause this to dereference a null pointer.  Shutdown needs to
wait for send completion to stop before tearing down the connection.  We
can't simply wait for the ring to empty because it may contain
unsignaled sends that will never be processed.

This patch tracks the number of signaled sends that we've posted and
waits for them to complete.  It also makes sure that the tasklet has
finished executing.
Signed-off-by: Zach Brown <zach.brown@oracle.com>

The trivial amount of memory saved isn't worth the cost of dealing with section
mismatches.
Signed-off-by: Zach Brown <zach.brown@oracle.com>

We are *definitely* counting cycles as closely as DaveM, so
ensure hwcache alignment for our recv ring control structs.
Signed-off-by: Andy Grover <andy.grover@oracle.com>

The recv refill path was leaking fragments because the recv event handler had
marked a ring element as free without freeing its frag.  This was happening
because it wasn't processing receives when the conn wasn't marked up or
connecting, as can be the case if it races with rmmod.

Two observations support always processing receives in the callback.

First, buildup should only post receives, thus triggering recv event handler
calls, once it has built up all the state to handle them.  Teardown should
destroy the CQ and drain the ring before tearing down the state needed to
process recvs.  Both appear to be true today.

Second, this test was fundamentally racy.  There is nothing to stop rmmod and
connection destruction from swooping in the moment after the conn state was
sampled but before real receive procesing starts.
Signed-off-by: Zach Brown <zach.brown@oracle.com>

We were seeing very nasty bugs due to fundamental assumption the current code
makes about concurrent work struct processing.  The code simpy isn't able to
handle concurrent connection shutdown work function execution today, for
example, which is very much possible once a multi-threaded krdsd was
introduced.  The problem compounds as additional work structs are added to the
mix.

krdsd is no longer perforance critical now that send and receive posting and
FMR flushing are done elsewhere, so the safest fix is to move back to the
single threaded krdsd that the current code was built around.
Signed-off-by: Zach Brown <zach.brown@oracle.com>

This patch moves the FMR flushing work in to its own mult-threaded work queue.
This is to maintain performance in preparation for returning the main krdsd
work queue back to a single threaded work queue to avoid deep-rooted
concurrency bugs.

This is also good because it further separates FMRs, which might be removed
some day, from the rest of the code base.
Signed-off-by: Zach Brown <zach.brown@oracle.com>

IB connections were not being destroyed during rmmod.

First, recently IB device removal callback was changed to disconnect
connections that used the removing device rather than destroying them.  So
connections with devices during rmmod were not being destroyed.

Second, rds_ib_destroy_nodev_conns() was being called before connections are
disassociated with devices.  It would almost never find connections in the
nodev list.

We first get rid of rds_ib_destroy_conns(), which is no longer called, and
refactor the existing caller into the main body of the function and get rid of
the list and lock wrappers.

Then we call rds_ib_destroy_nodev_conns() *after* ib_unregister_client() has
removed the IB device from all the conns and put the conns on the nodev list.

The result is that IB connections are destroyed by rmmod.
Signed-off-by: Zach Brown <zach.brown@oracle.com>

The RDS IB client removal callback can queue work to drop the final reference
to an IB device.  We have to make sure that this function has returned before
we complete rmmod or the work threads can try to execute freed code.
Signed-off-by: Zach Brown <zach.brown@oracle.com>

Signed-off-by: Andy Grover <andy.grover@oracle.com>

Not used.
Signed-off-by: Andy Grover <andy.grover@oracle.com>