This driver adds support for the Apple Motion Sensor (AMS) as found in 2005
revisions of Apple PowerBooks and iBooks.  It implements both the PMU and
I2C variants.  The I2C driver and mouse emulation is based on code by
Stelian Pop, while the PMU driver has been developped by Michael Hanselmann.
HD parking support will be added later.

Various people contributed fixes to this driver, including
Aristeu Sergio Rozanski Filho and Jean Delvare.
Signed-off-by: Stelian Pop <stelian@popies.net>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Robert Love <rml@novell.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Documentation for the new w83793 hardware monitoring driver, originally
provided by Yuan My from Winbond.

Also add myself as the maintainer of this driver.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Add support for the W83793 hardware monitoring chip. This driver
was originally contributed by Yuan Mu of Winbond Electronics Corp.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

The Silicon Hill club is not what it used to be.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

The lowest 3 bits are ignored, and the chip decodes all 8 addresses,
not only the 2 it needs.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Fans can be hotplugged, so we should create sysfs file even for fans
which are disabled at driver load time.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Add support for the Fintek F71872F/FG Super-I/O chip. It is basically the
same as the Fintek F71805F/FG as far as hardware monitoring is concerned,
with two additional internal voltages monitored (VSB and battery), and 6
VID inputs (not yet supported.)

To make things a bit more confusing, two of the voltage input pins (in4
and in8) can be used for other functions. The driver reads the pin
configuration from the Super-I/O configuration space to decide whether
it must create interface files for these inputs or not.

Many thanks to Nikolay Derkach for testing the early iterations of this
code and reporting bugs.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

This is a new hardware monitoring driver for the National Semiconductor
PC87427 Super-I/O chip. It only supports fan speed monitoring for now,
while the chip can do much more.

Thanks to Amir Habibi at Candelis for setting up a test system, and to
Michael Kress for testing several iterations of this driver.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

This interface was useless as the LPC ISA-like interface is always
available, is faster, and is more reliable. This cuts the driver
size by some 20%.

This change is also required to later convert the it87 driver to a
platform driver, so that we can get rid of i2c-isa in a near future.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Remove the strange DMI for the R52 (1846AQG)
and add a note to update to latest BIOS in the Kconfig
and source code.
Signed-off-by: Stephan Berberig <s.berberig@arcor.de>
Signed-off-by: Robert Love <rlove@rlove.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Move the DMI detection data from .text to .data. We really don't want
that amount of data on the stack.

Also refactor the macros used to generate the detection data, the
vendor becomes a parameter.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Robert Love <rlove@rlove.org>

pc87360 currently hardcodes vrm = 90 (2.4 vintage).  Update it to use
newer code in hwmon-vid which reads cpuid to determine the correct vid.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Document the different fan control methods, list their options, and give
some hints for best results.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

In "speed mode", the user specifies a target fan speed (in RPM) and the
chip automatically adjusts the PWM duty cycle (or DC output level) to
reach this target.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

In DC mode, the pwmN_freq files are not created.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Different frequencies can give better results depending on the exact fan
model used.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

pwmN files are writable only in manual fan speed control mode.
In automatic fan speed control modes, they are read-only and
report the duty cycle chosen by the chip.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

So far we were only extracting the fan skip bit from the
fan control registers, but we'll soon need more bits so
better store the whole register values.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6:
  [PATCH] x86-64: no paravirt for X86_VOYAGER or X86_VISWS
  [PATCH] i386: Fix io_apic.c warning
  [PATCH] i386: export smp_num_siblings for oprofile
  [PATCH] x86: Work around gcc 4.2 over aggressive optimizer
  [PATCH] x86: Fix boot hang due to nmi watchdog init code
  [PATCH] x86: Fix verify_quirk_intel_irqbalance()
  [PATCH] i386: Update defconfig
  [PATCH] x86-64: Update defconfig

Since Voyager and Visual WS already define ARCH_SETUP,
it looks like PARAVIRT shouldn't be offered for them.

In file included from arch/i386/kernel/setup.c:63:
include/asm-i386/mach-visws/setup_arch.h:8:1: warning: "ARCH_SETUP" redefin=
ed
In file included from include/asm/msr.h:5,
                 from include/asm/processor.h:17,
                 from include/asm/thread_info.h:16,
                 from include/linux/thread_info.h:21,
                 from include/linux/preempt.h:9,
                 from include/linux/spinlock.h:49,
                 from include/linux/capability.h:45,
                 from include/linux/sched.h:46,
                 from arch/i386/kernel/setup.c:26:
include/asm/paravirt.h:163:1: warning: this is the location of the previous=
 definition
In file included from arch/i386/kernel/setup.c:63:
include/asm-i386/mach-visws/setup_arch.h:8:1: warning: "ARCH_SETUP" redefin=
ed
In file included from include/asm/msr.h:5,
                 from include/asm/processor.h:17,
                 from include/asm/thread_info.h:16,
                 from include/linux/thread_info.h:21,
                 from include/linux/preempt.h:9,
                 from include/linux/spinlock.h:49,
                 from include/linux/capability.h:45,
                 from include/linux/sched.h:46,
                 from arch/i386/kernel/setup.c:26:
include/asm/paravirt.h:163:1: warning: this is the location of the previous=
 definition
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>

gcc 4.2 warns

linux/arch/i386/kernel/io_apic.c: In function ‘create_irq’:
linux/arch/i386/kernel/io_apic.c:2488: warning: ‘vector’ may be used uninitialized in this function

The warning is false, but somewhat legitimate so work around it.
Signed-off-by: Andi Kleen <ak@suse.de>

oprofile uses smp_num_siblings without testing for CONFIG_X86_HT.
I looked at modifying oprofile, but this way is cleaner & simpler
and I didn't see a good reason not to just export it when CONFIG_SMP.

WARNING: "smp_num_siblings" [arch/i386/oprofile/oprofile.ko] undefined!
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andi Kleen <ak@suse.de>

The new PDA code uses a dummy _proxy_pda variable to describe
memory references to the PDA. It is never referenced
in inline assembly, but exists as input/output arguments.
gcc 4.2 in some cases can CSE references to this which causes
unresolved symbols.  Define it to zero to avoid this.
Signed-off-by: Andi Kleen <ak@suse.de>

2.6.19  stopped booting (or booted based on build/config) on our x86_64
systems due to a bug introduced in 2.6.19.  check_nmi_watchdog schedules an
IPI on all cpus to  busy wait on a flag, but fails to set the busywait
flag if NMI functionality is disabled.  This causes the secondary cpus
to spin in an endless loop, causing the kernel bootup to hang.
Depending upon the build, the  busywait flag got overwritten (stack variable)
and caused  the kernel to bootup on certain builds.  Following patch fixes
the bug by setting the busywait flag before returning from check_nmi_watchdog.
I guess using a stack variable is not good here as the calling function could
potentially return while the busy wait loop is still spinning on the flag.

AK: I redid the patch significantly to be cleaner
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Signed-off-by: Andi Kleen <ak@suse.de>

Fix verify_quirk_intel_irqbalance(). genapic checks should really
happen only on affected versions of the E7520/E7320/E7525 based platforms.

AK: This should akpm's Coyote SDV
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>

Signed-off-by: Andi Kleen <ak@suse.de>

Signed-off-by: Andi Kleen <ak@suse.de>

* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (21 commits)
  Fix http://bugzilla.kernel.org/show_bug.cgi?id=7606
  drm: add flag for mapping PCI DMA buffers read-only.
  drm: fix up irqflags in drm_lock.c
  drm: i915 updates
  drm: i915: fix up irqflags arg
  drm: i915: Only return EBUSY after we've established we need to schedule a new swap.
  drm: i915: Fix 'sequence has passed' condition in i915_vblank_swap().
  drm: i915: Add SAREA fileds for determining which pipe to sync window buffer swaps to.
  drm: Make handling of dev_priv->vblank_pipe more robust.
  drm: DRM_I915_VBLANK_SWAP ioctl: Take drm_vblank_seq_type_t instead
  drm: i915: Add ioctl for scheduling buffer swaps at vertical blanks.
  drm: Core vsync: Don't clobber target sequence number when scheduling signal.
  drm: Core vsync: Add flag DRM_VBLANK_NEXTONMISS.
  drm: Make locked tasklet handling more robust.
  drm: drm_rmdraw: Declare id and idx as signed so testing for < 0 works as intended.
  drm: Change first valid DRM drawable ID to be 1 instead of 0.
  drm: drawable locking + memory management fixes + copyright
  drm: Add support for interrupt triggered driver callback with lock held to DRM core.
  drm: Add support for tracking drawable information to core
  drm: add support for secondary vertical blank interrupt to i915
  ...

Use direct assignment rather than cmpxchg() as the latter is unavailable
and unimplementable on some platforms and is actually unnecessary.

The use of cmpxchg() was to guard against two possibilities, neither of
which can actually occur:

 (1) The pending flag may have been unset or may be cleared.  However, given
     where it's called, the pending flag is _always_ set.  I don't think it
     can be unset whilst we're in set_wq_data().

     Once the work is enqueued to be actually run, the only way off the queue
     is for it to be actually run.

     If it's a delayed work item, then the bit can't be cleared by the timer
     because we haven't started the timer yet.  Also, the pending bit can't be
     cleared by cancelling the delayed work _until_ the work item has had its
     timer started.

 (2) The workqueue pointer might change.  This can only happen in two cases:

     (a) The work item has just been queued to actually run, and so we're
         protected by the appropriate workqueue spinlock.

     (b) A delayed work item is being queued, and so the timer hasn't been
     	 started yet, and so no one else knows about the work item or can
     	 access it (the pending bit protects us).

     Besides, set_wq_data() _sets_ the workqueue pointer unconditionally, so
     it can be assigned instead.

So, replacing the set_wq_data() with a straight assignment would be okay
in most cases.

The problem is where we end up tangling with test_and_set_bit() emulated
using spinlocks, and even then it's not a problem _provided_
test_and_set_bit() doesn't attempt to modify the word if the bit was
set.

If that's a problem, then a bitops-proofed assignment will be required -
equivalent to atomic_set() vs other atomic_xxx() ops.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Amiga PCMCIA NE2000 Ethernet: Add missing initialization of dev->irq
Signed-off-by: Kars de Jong <jongk@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Remove bogus comments about unexporting cache_{push,clear}(), as inline
dma_cache_maintenance() (used by at least bionet and pamsnet) calls them.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Atari IDE: The interrupt needs SA_SHIRQ now to get registered.
Signed-off-by: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Make sun3 scsi drivers compile/work again (though with way too many warnings...)

Tested on 3/50, 3/60.
Signed-off-by: Sam Creasey <sammy@sammy.net>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

General compile fixes for 2.6.16 for sun3, and some updates to make the new
bootloader work correctly.  Tested on 3/50, 3/60, 3/80.
Signed-off-by: Sam Creasey <sammy@sammy.net>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

- 7990: request_irq() should have SA_SHIRQ flag set
- hplance_init() printed dev->name before register_netdev() had filled it in
Signed-off-by: Kars de Jong <jongk@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NETLINK]: Put {IFA,IFLA}_{RTA,PAYLOAD} macros back for userspace.
  [NET_SCHED] sch_htb: turn intermediate classes into leaves
  [NET_SCHED] sch_cbq: deactivating when grafting, purging etc.
  [XFRM]: Fix XFRMGRP_REPORT to use correct multicast group.
  [NET]: Force a cache line split in hh_cache in SMP.
  [NETPOLL]: make arp replies through netpoll use mac address of sender
  [NETLINK]: Restore API compatibility of address and neighbour bits
  [AX.25]: Fix default address and broadcast address initialization.
  [AX.25]: Constify ax25 utility functions
  [BNX2]: Add an error check.
  [NET]: Convert hh_lock to seqlock.

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [PATCH] add STB810 support (Philips PNX8550-based)
  [MIPS] Qemu now has an ELF loader.
  [MIPS] Add GENERIC_HARDIRQS_NO__DO_IRQ for i8259 users
  [MIPS] Optimize csum_partial for 64bit kernel
  [MIPS] Optimize flow of csum_partial
  [MIPS] Make csum_partial more readable
  [MIPS] Rename SNI_RM200_PCI to just SNI_RM preparing for more RM machines

GLIBC uses them etc.

They are guarded by ifndef __KERNEL__ so nobody will start
accidently using them in the kernel again, it's just for
userspace.
Signed-off-by: David S. Miller <davem@davemloft.net>

- turn intermediate classes into leaves again when their
  last child is deleted (struct htb_class changed)
Signed-off-by: Jarek Poplawski <jarkao2@o2.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

- deactivating of active classes when q.qlen drops to zero
  (cbq_drop)

- a redundant instruction removed from cbq_deactivate_class

PS: probably htb_deactivate in htb_delete and
cbq_deactivate_class in cbq_delete are also
redundant now.
Signed-off-by: Jarek Poplawski <jarkao2@o2.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>