Pull HID updates from Jiri Kosina:
 "No biggies this time:

   - micro-optimization of implement() in HID core parses, from Dmitry
     Torokhov

   - thingm driver cleanups from Heiner Kallweit

   - fine-graining detection of distance and tilt axes in wacom driver
     from Jason Gerecke

   - New hid-asus driver, currently supporting X205TA and VivoBook
     E200HA, from Yusuke Fujimaki"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: wacom: Add fuzz factor to distance and tilt axes
  HID: usbhid: quirks for Corsair RGB keyboard & mice (K70R, K95RGB, M65RGB, K70RGB, K65RGB)
  HID: thingm: remove not needed error message
  HID: thingm: set new flag LED_HW_PLUGGABLE
  HID: thingm: factor out duplicated code to thingm_init_led
  HID: simplify implement() a bit
  HID: asus: add support for VivoBook E200HA
  HID: hidraw: silence an uninitialized variable warning
  HID: roccat: silence an uninitialized variable warning
  HID: Asus X205TA keyboard driver
  HID: hidraw: switch to using memdup_user

Pull livepatching updates from Jiri Kosina:

 - remove of our own implementation of architecture-specific relocation
   code and leveraging existing code in the module loader to perform
   arch-dependent work, from Jessica Yu.

   The relevant patches have been acked by Rusty (for module.c) and
   Heiko (for s390).

 - live patching support for ppc64le, which is a joint work of Michael
   Ellerman and Torsten Duwe.  This is coming from topic branch that is
   share between livepatching.git and ppc tree.

 - addition of livepatching documentation from Petr Mladek

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  livepatch: make object/func-walking helpers more robust
  livepatch: Add some basic livepatch documentation
  powerpc/livepatch: Add live patching support on ppc64le
  powerpc/livepatch: Add livepatch stack to struct thread_info
  powerpc/livepatch: Add livepatch header
  livepatch: Allow architectures to specify an alternate ftrace location
  ftrace: Make ftrace_location_range() global
  livepatch: robustify klp_register_patch() API error checking
  Documentation: livepatch: outline Elf format and requirements for patch modules
  livepatch: reuse module loader code to write relocations
  module: s390: keep mod_arch_specific for livepatch modules
  module: preserve Elf information for livepatch modules
  Elf: add livepatch-specific Elf constants

Pull trivial tree updates from Jiri Kosina.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (21 commits)
  gitignore: fix wording
  mfd: ab8500-debugfs: fix "between" in printk
  memstick: trivial fix of spelling mistake on management
  cpupowerutils: bench: fix "average"
  treewide: Fix typos in printk
  IB/mlx4: printk fix
  pinctrl: sirf/atlas7: fix printk spelling
  serial: mctrl_gpio: Grammar s/lines GPIOs/line GPIOs/, /sets/set/
  w1: comment spelling s/minmum/minimum/
  Blackfin: comment spelling s/divsor/divisor/
  metag: Fix misspellings in comments.
  ia64: Fix misspellings in comments.
  hexagon: Fix misspellings in comments.
  tools/perf: Fix misspellings in comments.
  cris: Fix misspellings in comments.
  c6x: Fix misspellings in comments.
  blackfin: Fix misspelling of 'register' in comment.
  avr32: Fix misspelling of 'definitions' in comment.
  treewide: Fix typos in printk
  Doc: treewide : Fix typos in DocBook/filesystem.xml
  ...

Pull networking updates from David Miller:
 "Highlights:

   1) Support SPI based w5100 devices, from Akinobu Mita.

   2) Partial Segmentation Offload, from Alexander Duyck.

   3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE.

   4) Allow cls_flower stats offload, from Amir Vadai.

   5) Implement bpf blinding, from Daniel Borkmann.

   6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is
      actually using FASYNC these atomics are superfluous.  From Eric
      Dumazet.

   7) Run TCP more preemptibly, also from Eric Dumazet.

   8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e
      driver, from Gal Pressman.

   9) Allow creating ppp devices via rtnetlink, from Guillaume Nault.

  10) Improve BPF usage documentation, from Jesper Dangaard Brouer.

  11) Support tunneling offloads in qed, from Manish Chopra.

  12) aRFS offloading in mlx5e, from Maor Gottlieb.

  13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo
      Leitner.

  14) Add MSG_EOR support to TCP, this allows controlling packet
      coalescing on application record boundaries for more accurate
      socket timestamp sampling.  From Martin KaFai Lau.

  15) Fix alignment of 64-bit netlink attributes across the board, from
      Nicolas Dichtel.

  16) Per-vlan stats in bridging, from Nikolay Aleksandrov.

  17) Several conversions of drivers to ethtool ksettings, from Philippe
      Reynes.

  18) Checksum neutral ILA in ipv6, from Tom Herbert.

  19) Factorize all of the various marvell dsa drivers into one, from
      Vivien Didelot

  20) Add VF support to qed driver, from Yuval Mintz"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits)
  Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m"
  Revert "phy dp83867: Make rgmii parameters optional"
  r8169: default to 64-bit DMA on recent PCIe chips
  phy dp83867: Make rgmii parameters optional
  phy dp83867: Fix compilation with CONFIG_OF_MDIO=m
  bpf: arm64: remove callee-save registers use for tmp registers
  asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions
  switchdev: pass pointer to fib_info instead of copy
  net_sched: close another race condition in tcf_mirred_release()
  tipc: fix nametable publication field in nl compat
  drivers: net: Don't print unpopulated net_device name
  qed: add support for dcbx.
  ravb: Add missing free_irq() calls to ravb_close()
  qed: Remove a stray tab
  net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings
  net: ethernet: fec-mpc52xx: use phydev from struct net_device
  bpf, doc: fix typo on bpf_asm descriptions
  stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set
  net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings
  net: ethernet: fs-enet: use phydev from struct net_device
  ...

Pull device mapper updates from Mike Snitzer:

 - based on Jens' 'for-4.7/core' to have DM thinp's discard support use
   bio_inc_remaining() and the block core's new async __blkdev_issue_discard()
   interface

 - make DM multipath's fast code-paths lockless, using lockless_deference,
   to significantly improve large NUMA performance when using blk-mq.
   The m->lock spinlock contention was a serious bottleneck.

 - a few other small code cleanups and Documentation fixes

* tag 'dm-4.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm thin: unroll issue_discard() to create longer discard bio chains
  dm thin: use __blkdev_issue_discard for async discard support
  dm thin: remove __bio_inc_remaining() and switch to using bio_inc_remaining()
  dm raid: make sure no feature flags are set in metadata
  dm ioctl: drop use of __GFP_REPEAT in copy_params()'s __vmalloc() call
  dm stats: fix spelling mistake in Documentation
  dm cache: update cache-policies.txt now that mq is an alias for smq
  dm mpath: eliminate use of spinlock in IO fast-paths
  dm mpath: move trigger_event member to the end of 'struct multipath'
  dm mpath: use atomic_t for counting members of 'struct multipath'
  dm mpath: switch to using bitops for state flags
  dm thin: Remove return statement from void function
  dm: remove unused mapped_device argument from free_tio()

Pull block driver updates from Jens Axboe:
 "On top of the core pull request, this is the drivers pull request for
  this merge window.  This contains:

   - Switch drivers to the new write back cache API, and kill off the
     flush flags.  From me.

   - Kill the discard support for the STEC pci-e flash driver.  It's
     trivially broken, and apparently unmaintained, so it's safer to
     just remove it.  From Jeff Moyer.

   - A set of lightnvm updates from the usual suspects (Matias/Javier,
     and Simon), and fixes from Arnd, Jeff Mahoney, Sagi, and Wenwei
     Tao.

   - A set of updates for NVMe:

        - Turn the controller state management into a proper state
          machine.  From Christoph.

        - Shuffling of code in preparation for NVMe-over-fabrics, also
          from Christoph.

        - Cleanup of the command prep part from Ming Lin.

        - Rewrite of the discard support from Ming Lin.

        - Deadlock fix for namespace removal from Ming Lin.

        - Use the now exported blk-mq tag helper for IO termination.
          From Sagi.

        - Various little fixes from Christoph, Guilherme, Keith, Ming
          Lin, Wang Sheng-Hui.

   - Convert mtip32xx to use the now exported blk-mq tag iter function,
     from Keith"

* 'for-4.7/drivers' of git://git.kernel.dk/linux-block: (74 commits)
  lightnvm: reserved space calculation incorrect
  lightnvm: rename nr_pages to nr_ppas on nvm_rq
  lightnvm: add is_cached entry to struct ppa_addr
  lightnvm: expose gennvm_mark_blk to targets
  lightnvm: remove mgt targets on mgt removal
  lightnvm: pass dma address to hardware rather than pointer
  lightnvm: do not assume sequential lun alloc.
  nvme/lightnvm: Log using the ctrl named device
  lightnvm: rename dma helper functions
  lightnvm: enable metadata to be sent to device
  lightnvm: do not free unused metadata on rrpc
  lightnvm: fix out of bound ppa lun id on bb tbl
  lightnvm: refactor set_bb_tbl for accepting ppa list
  lightnvm: move responsibility for bad blk mgmt to target
  lightnvm: make nvm_set_rqd_ppalist() aware of vblks
  lightnvm: remove struct factory_blks
  lightnvm: refactor device ops->get_bb_tbl()
  lightnvm: introduce nvm_for_each_lun_ppa() macro
  lightnvm: refactor dev->online_target to global nvm_targets
  lightnvm: rename nvm_targets to nvm_tgt_type
  ...

Pull core block layer updates from Jens Axboe:
 "This is the core block IO changes for this merge window.  Nothing
  earth shattering in here, it's mostly just fixes.  In detail:

   - Fix for a long standing issue where wrong ordering in blk-mq caused
     order_to_size() to spew a warning.  From Bart.

   - Async discard support from Christoph.  Basically just splitting our
     sync interface into a submit + wait part.

   - Add a cleaner interface for flagging whether a device has a write
     back cache or not.  We've previously overloaded blk_queue_flush()
     with this, but let's make it more explicit.  Drivers cleaned up and
     updated in the drivers pull request.  From me.

   - Fix for a double check for whether IO accounting is enabled or not.
     From Michael Callahan.

   - Fix for the async discard from Mike Snitzer, reinstating the early
     EOPNOTSUPP return if the device doesn't support discards.

   - Also from Mike, export bio_inc_remaining() so dm can drop it's
     private copy of it.

   - From Ming Lin, add support for passing in an offset for request
     payloads.

   - Tag function export from Sagi, which will be used in NVMe in the
     drivers pull.

   - Two blktrace related fixes from Shaohua.

   - Propagate NOMERGE flag when making a request from a bio, also from
     Shaohua.

   - An optimization to not parse cgroup paths in blk-throttle, if we
     don't need to.  From Shaohua"

* 'for-4.7/core' of git://git.kernel.dk/linux-block:
  blk-mq: fix undefined behaviour in order_to_size()
  blk-throttle: don't parse cgroup path if trace isn't enabled
  blktrace: add missed mask name
  blktrace: delete garbage for message trace
  block: make bio_inc_remaining() interface accessible again
  block: reinstate early return of -EOPNOTSUPP from blkdev_issue_discard
  block: Minor blk_account_io_start usage cleanup
  block: add __blkdev_issue_discard
  block: remove struct bio_batch
  block: copy NOMERGE flag from bio to request
  block: add ability to flag write back caching on a device
  blk-mq: Export tagset iter function
  block: add offset in blk_add_request_payload()
  writeback: Fix performance regression in wb_over_bg_thresh()

Pull vfs cleanups from Al Viro:
 "More cleanups from Christoph"

* 'work.preadv2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  nfsd: use RWF_SYNC
  fs: add RWF_DSYNC aand RWF_SYNC
  ceph: use generic_write_sync
  fs: simplify the generic_write_sync prototype
  fs: add IOCB_SYNC and IOCB_DSYNC
  direct-io: remove the offset argument to dio_complete
  direct-io: eliminate the offset argument to ->direct_IO
  xfs: eliminate the pos variable in xfs_file_dio_aio_write
  filemap: remove the pos argument to generic_file_direct_write
  filemap: remove pos variables in generic_file_read_iter

Pull 'struct path' constification update from Al Viro:
 "'struct path' is passed by reference to a bunch of Linux security
  methods; in theory, there's nothing to stop them from modifying the
  damn thing and LSM community being what it is, sooner or later some
  enterprising soul is going to decide that it's a good idea.

  Let's remove the temptation and constify all of those..."

* 'work.const-path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  constify ima_d_path()
  constify security_sb_pivotroot()
  constify security_path_chroot()
  constify security_path_{link,rename}
  apparmor: remove useless checks for NULL ->mnt
  constify security_path_{mkdir,mknod,symlink}
  constify security_path_{unlink,rmdir}
  apparmor: constify common_perm_...()
  apparmor: constify aa_path_link()
  apparmor: new helper - common_path_perm()
  constify chmod_common/security_path_chmod
  constify security_sb_mount()
  constify chown_common/security_path_chown
  tomoyo: constify assorted struct path *
  apparmor_path_truncate(): path->mnt is never NULL
  constify vfs_truncate()
  constify security_path_truncate()
  [apparmor] constify struct path * in a bunch of helpers

Pull cifs xattr updates from Al Viro:
 "This is the remaining parts of the xattr work - the cifs bits"

* 'for-cifs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  cifs: Switch to generic xattr handlers
  cifs: Fix removexattr for os2.* xattrs
  cifs: Check for equality with ACL_TYPE_ACCESS and ACL_TYPE_DEFAULT
  cifs: Fix xattr name checks

Pull UDF fixes from Jan Kara:
 "A fix for UDF crash on corrupted media and one UDF header fixup"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Export superblock magic to userspace
  udf: Prevent stack overflow on corrupted filesystem mount

Pull jfs updates from Dave Kleikamp:
 "Some jfs logging cleanups from Joe Perches"

* tag 'jfs-4.7' of git://github.com/kleikamp/linux-shaggy:
  jfs: Coalesce some formats
  jfs: Remove unnecessary line continuations and terminating newlines
  jfs: Remove terminating newlines from jfs_info, jfs_warn, jfs_err uses

This section of code initially looks redundant, but is required. This
improves the comment to explain more clearly why the reset is needed.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 7f32541c.

This needs reverting too, as per requests.
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 81003bc9.

Developers have asked me to revert this for now.
Signed-off-by: David S. Miller <davem@davemloft.net>

The current logic around the 'use_dac' module parameter prevents the
r81969 driver from being loadable on 64-bit systems without any RAM
below 4 GB when the parameter is left at its default value.

So introduce a new default value -1 which indicates that 64-bit DMA
should be enabled on sufficiently recent PCIe chips, i.e., versions
RTL_GIGA_MAC_VER_18 or later. Explicit param values of 0 or 1 retain
the existing behavior of unconditionally enabling/disabling 64-bit DMA
on 64-bit architectures (i.e., regardless of the type and version of the
chip)

Since PCIe chips do not need to CPlusCmd Dual Address Cycle to be set,
make that conditional on the device type as well.

Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If you compile without OF_MDIO support in an RGMII configuration, we fail
to configure the dp83867 phy today by writing garbage into its configuration
registers.

On the other hand if you do compile with OF_MDIO and the phy gets loaded via
device tree, you have to have the properties set in the device tree, otherwise
we fail to load the driver and don't even attach the generic phy driver to
the interface anymore.

To make things slightly more consistent, make the rgmii configuration properties
optional and allow a user to omit them in their device tree.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

When CONFIG_OF_MDIO is configured as module, the #define for it really
is CONFIG_OF_MDIO_MODULE, not CONFIG_OF_MDIO. So if we are compiling it
as module, the dp83867 doesn't see that OF_MDIO was selected and doesn't
read the dt rgmii parameters.

The fix is simple: Use IS_ENABLED(). It checks for both - module as well
as compiled in code.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'qcom-soc-for-4.7-2' into net-next

This merges the Qualcomm SOC tree with the net-next, solving the
merge conflict in the SMD API between the two.

In the current implementation of ARM64 eBPF JIT, R23 and R24 are used for
tmp registers, which are callee-saved registers. This leads to variable size
of JIT prologue and epilogue. The latest blinding constant change prefers to
constant size of prologue and epilogue. AAPCS reserves R9 ~ R15 for temp
registers which not need to be saved/restored during function call. So, replace
R23 and R24 to R10 and R11, and remove tmp_used flag to save 2 instructions for
some jited BPF program.

CC: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Zi Shen Lim <zlim.lnx@gmail.com>
Signed-off-by: Yang Shi <yang.shi@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

In testing with HiKey, we found that since
commit 3f30b158 ("asix: On RX avoid creating bad Ethernet
frames"),
we're seeing lots of noise during network transfers:

[  239.027993] asix 1-1.1:1.0 eth0: asix_rx_fixup() Data Header synchronisation was lost, remaining 988
[  239.037310] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0x54ebb5ec, offset 4
[  239.045519] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0xcdffe7a2, offset 4
[  239.275044] asix 1-1.1:1.0 eth0: asix_rx_fixup() Data Header synchronisation was lost, remaining 988
[  239.284355] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0x1d36f59d, offset 4
[  239.292541] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0xaef3c1e9, offset 4
[  239.518996] asix 1-1.1:1.0 eth0: asix_rx_fixup() Data Header synchronisation was lost, remaining 988
[  239.528300] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0x2881912, offset 4
[  239.536413] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0x5638f7e2, offset 4

And network throughput ends up being pretty bursty and slow with
a overall throughput of at best ~30kB/s (where as previously we
got 1.1MB/s with the slower USB1.1 "full speed" host).

We found the issue also was reproducible on a x86_64 system,
using a "high-speed" USB2.0 port but the throughput did not
measurably drop (possibly due to the scp transfer being cpu
bound on my slow test hardware).

After lots of debugging, I found the check added in the
problematic commit seems to be calculating the offset
incorrectly.

In the normal case, in the main loop of the function, we do:
(where offset is zero, or set to "offset += (copy_length + 1) &
0xfffe" in the previous loop)
    rx->header = get_unaligned_le32(skb->data +
                                    offset);
    offset += sizeof(u32);

But the problematic patch calculates:
    offset = ((rx->remaining + 1) & 0xfffe) + sizeof(u32);
    rx->header = get_unaligned_le32(skb->data + offset);

Adding some debug logic to check those offset calculation used
to find rx->header, the one in problematic code is always too
large by sizeof(u32).

Thus, this patch removes the incorrect " + sizeof(u32)" addition
in the problematic calculation, and resolves the issue.

Cc: Dean Jenkins <Dean_Jenkins@mentor.com>
Cc: "David B. Robins" <linux@davidrobins.net>
Cc: Mark Craske <Mark_Craske@mentor.com>
Cc: Emil Goode <emilgoode@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: YongQin Liu <yongqin.liu@linaro.org>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Ivan Vecera <ivecera@redhat.com>
Cc: linux-usb@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: stable <stable@vger.kernel.org> #4.4+
Reported-by: Yongqin Liu <yongqin.liu@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull parallel filesystem directory handling update from Al Viro.

This is the main parallel directory work by Al that makes the vfs layer
able to do lookup and readdir in parallel within a single directory.
That's a big change, since this used to be all protected by the
directory inode mutex.

The inode mutex is replaced by an rwsem, and serialization of lookups of
a single name is done by a "in-progress" dentry marker.

The series begins with xattr cleanups, and then ends with switching
filesystems over to actually doing the readdir in parallel (switching to
the "iterate_shared()" that only takes the read lock).

A more detailed explanation of the process from Al Viro:
 "The xattr work starts with some acl fixes, then switches ->getxattr to
  passing inode and dentry separately.  This is the point where the
  things start to get tricky - that got merged into the very beginning
  of the -rc3-based #work.lookups, to allow untangling the
  security_d_instantiate() mess.  The xattr work itself proceeds to
  switch a lot of filesystems to generic_...xattr(); no complications
  there.

  After that initial xattr work, the series then does the following:

   - untangle security_d_instantiate()

   - convert a bunch of open-coded lookup_one_len_unlocked() to calls of
     that thing; one such place (in overlayfs) actually yields a trivial
     conflict with overlayfs fixes later in the cycle - overlayfs ended
     up switching to a variant of lookup_one_len_unlocked() sans the
     permission checks.  I would've dropped that commit (it gets
     overridden on merge from #ovl-fixes in #for-next; proper resolution
     is to use the variant in mainline fs/overlayfs/super.c), but I
     didn't want to rebase the damn thing - it was fairly late in the
     cycle...

   - some filesystems had managed to depend on lookup/lookup exclusion
     for *fs-internal* data structures in a way that would break if we
     relaxed the VFS exclusion.  Fixing hadn't been hard, fortunately.

   - core of that series - parallel lookup machinery, replacing
     ->i_mutex with rwsem, making lookup_slow() take it only shared.  At
     that point lookups happen in parallel; lookups on the same name
     wait for the in-progress one to be done with that dentry.

     Surprisingly little code, at that - almost all of it is in
     fs/dcache.c, with fs/namei.c changes limited to lookup_slow() -
     making it use the new primitive and actually switching to locking
     shared.

   - parallel readdir stuff - first of all, we provide the exclusion on
     per-struct file basis, same as we do for read() vs lseek() for
     regular files.  That takes care of most of the needed exclusion in
     readdir/readdir; however, these guys are trickier than lookups, so
     I went for switching them one-by-one.  To do that, a new method
     '->iterate_shared()' is added and filesystems are switched to it
     as they are either confirmed to be OK with shared lock on directory
     or fixed to be OK with that.  I hope to kill the original method
     come next cycle (almost all in-tree filesystems are switched
     already), but it's still not quite finished.

   - several filesystems get switched to parallel readdir.  The
     interesting part here is dealing with dcache preseeding by readdir;
     that needs minor adjustment to be safe with directory locked only
     shared.

     Most of the filesystems doing that got switched to in those
     commits.  Important exception: NFS.  Turns out that NFS folks, with
     their, er, insistence on VFS getting the fuck out of the way of the
     Smart Filesystem Code That Knows How And What To Lock(tm) have
     grown the locking of their own.  They had their own homegrown
     rwsem, with lookup/readdir/atomic_open being *writers* (sillyunlink
     is the reader there).  Of course, with VFS getting the fuck out of
     the way, as requested, the actual smarts of the smart filesystem
     code etc. had become exposed...

   - do_last/lookup_open/atomic_open cleanups.  As the result, open()
     without O_CREAT locks the directory only shared.  Including the
     ->atomic_open() case.  Backmerge from #for-linus in the middle of
     that - atomic_open() fix got brought in.

   - then comes NFS switch to saner (VFS-based ;-) locking, killing the
     homegrown "lookup and readdir are writers" kinda-sorta rwsem.  All
     exclusion for sillyunlink/lookup is done by the parallel lookups
     mechanism.  Exclusion between sillyunlink and rmdir is a real rwsem
     now - rmdir being the writer.

     Result: NFS lookups/readdirs/O_CREAT-less opens happen in parallel
     now.

   - the rest of the series consists of switching a lot of filesystems
     to parallel readdir; in a lot of cases ->llseek() gets simplified
     as well.  One backmerge in there (again, #for-linus - rockridge
     fix)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (74 commits)
  ext4: switch to ->iterate_shared()
  hfs: switch to ->iterate_shared()
  hfsplus: switch to ->iterate_shared()
  hostfs: switch to ->iterate_shared()
  hpfs: switch to ->iterate_shared()
  hpfs: handle allocation failures in hpfs_add_pos()
  gfs2: switch to ->iterate_shared()
  f2fs: switch to ->iterate_shared()
  afs: switch to ->iterate_shared()
  befs: switch to ->iterate_shared()
  befs: constify stuff a bit
  isofs: switch to ->iterate_shared()
  get_acorn_filename(): deobfuscate a bit
  btrfs: switch to ->iterate_shared()
  logfs: no need to lock directory in lseek
  switch ecryptfs to ->iterate_shared
  9p: switch to ->iterate_shared()
  fat: switch to ->iterate_shared()
  romfs, squashfs: switch to ->iterate_shared()
  more trivial ->iterate_shared conversions
  ...

The problem is that fib_info->nh is [0] so the struct fib_info
allocation size depends on number of nexthops. If we just copy fib_info,
we do not copy the nexthops info and driver accesses memory which is not
ours.

Given the fact that fib4 does not defer operations and therefore it does
not need copy, just pass the pointer down to drivers as it was done
before.

Fixes: 850d0cbc ("switchdev: remove pointers from switchdev objects")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull irq updates from Thomas Gleixner:
 "This update delivers:

   - Yet another interrupt chip diver (LPC32xx)
   - Core functions to handle partitioned per-cpu interrupts
   - Enhancements to the IPI core
   - Proper handling of irq type configuration
   - A large set of ARM GIC enhancements
   - The usual pile of small fixes, cleanups and enhancements"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
  irqchip/bcm2836: Use a more generic memory barrier call
  irqchip/bcm2836: Fix compiler warning on 64-bit build
  irqchip/bcm2836: Drop smp_set_ops on arm64 builds
  irqchip/gic: Add helper functions for GIC setup and teardown
  irqchip/gic: Store GIC configuration parameters
  irqchip/gic: Pass GIC pointer to save/restore functions
  irqchip/gic: Return an error if GIC initialisation fails
  irqchip/gic: Remove static irq_chip definition for eoimode1
  irqchip/gic: Don't initialise chip if mapping IO space fails
  irqchip/gic: WARN if setting the interrupt type for a PPI fails
  irqchip/gic: Don't unnecessarily write the IRQ configuration
  irqchip: Mask the non-type/sense bits when translating an IRQ
  genirq: Ensure IRQ descriptor is valid when setting-up the IRQ
  irqchip/gic-v3: Configure all interrupts as non-secure Group-1
  irqchip/gic-v2m: Add workaround for Broadcom NS2 GICv2m erratum
  irqchip/irq-alpine-msi: Don't use <asm-generic/msi.h>
  irqchip/mbigen: Checking for IS_ERR() instead of NULL
  irqchip/gic-v3: Remove inexistant register definition
  irqchip/gicv3-its: Don't allow devices whose ID is outside range
  irqchip: Add LPC32xx interrupt controller driver
  ...

Pull timer updates from Thomas Gleixner:
 "A rather small set of patches from the timer departement:

   - Some more y2038 work
   - Yet another new clocksource driver
   - The usual set of small fixes, cleanups and enhancements"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/tegra: Remove unused suspend/resume code
  clockevents/driversi/mps2: add MPS2 Timer driver
  dt-bindings: document the MPS2 timer bindings
  clocksource/drivers/mtk_timer: Add __init attribute
  clockevents/drivers/dw_apb_timer: Implement ->set_state_oneshot_stopped()
  time: Introduce do_sys_settimeofday64()
  security: Introduce security_settime64()
  clocksource: Add missing include of of.h.

Merge tag 'trace-fixes-v4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing ring-buffer fixes from Steven Rostedt:
 "Hao Qin reported an integer overflow possibility with signed and
  unsigned numbers in the ring-buffer code.

    https://bugzilla.kernel.org/show_bug.cgi?id=118001

  At first I did not think this was too much of an issue, because the
  overflow would be caught later when either too much data was allocated
  or it would trigger RB_WARN_ON() which shuts down the ring buffer.

  But looking closer into it, I found that the right settings could
  bypass the checks and crash the kernel.  Luckily, this is only
  accessible by root.

  The first fix is to convert all the variables into long, such that we
  don't get into issues between 32 bit variables being assigned 64 bit
  ones.  This fixes the RB_WARN_ON() triggering.

  The next fix is to get rid of a duplicate DIV_ROUND_UP() that when
  called twice with the right value, can cause a kernel crash.

  The first DIV_ROUND_UP() is to normalize the input and it is checked
  against the minimum allowable value.  But then DIV_ROUND_UP() is
  called again, which can overflow due to the (a + b - 1)/b, logic.  The
  first called upped the value, the second can overflow (with the +b
  part).

  The second call to DIV_ROUND_UP() came in via a second change a while
  ago and the code is cleaned up to remove it"

* tag 'trace-fixes-v4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ring-buffer: Prevent overflow of size in ring_buffer_resize()
  ring-buffer: Use long for nr_pages to avoid overflow failures

We saw the following extra refcount release on veth device:

  kernel: [7957821.463992] unregister_netdevice: waiting for mesos50284 to become free. Usage count = -1

Since we heavily use mirred action to redirect packets to veth, I think
this is caused by the following race condition:

CPU0:
tcf_mirred_release(): (in RCU callback)
	struct net_device *dev = rcu_dereference_protected(m->tcfm_dev, 1);

CPU1:
mirred_device_event():
        spin_lock_bh(&mirred_list_lock);
        list_for_each_entry(m, &mirred_list, tcfm_list) {
                if (rcu_access_pointer(m->tcfm_dev) == dev) {
                        dev_put(dev);
                        /* Note : no rcu grace period necessary, as
                         * net_device are already rcu protected.
                         */
                        RCU_INIT_POINTER(m->tcfm_dev, NULL);
                }
        }
        spin_unlock_bh(&mirred_list_lock);

CPU0:
tcf_mirred_release():
        spin_lock_bh(&mirred_list_lock);
        list_del(&m->tcfm_list);
        spin_unlock_bh(&mirred_list_lock);
        if (dev)               // <======== Stil refers to the old m->tcfm_dev
                dev_put(dev);  // <======== dev_put() is called on it again

The action init code path is good because it is impossible to modify
an action that is being removed.

So, fix this by moving everything under the spinlock.

Fixes: 2ee22a90 ("net_sched: act_mirred: remove spinlock in fast path")
Fixes: 6bd00b85 ("act_mirred: fix a race condition on mirred_list")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The publication field of the old netlink API should contain the
publication key and not the publication reference.

Fixes: 44a8ae94 (tipc: convert legacy nl name table dump to nl compat)
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull crypto update from Herbert Xu:
 "API:

   - Crypto self tests can now be disabled at boot/run time.
   - Add async support to algif_aead.

  Algorithms:

   - A large number of fixes to MPI from Nicolai Stange.
   - Performance improvement for HMAC DRBG.

  Drivers:

   - Use generic crypto engine in omap-des.
   - Merge ppc4xx-rng and crypto4xx drivers.
   - Fix lockups in sun4i-ss driver by disabling IRQs.
   - Add DMA engine support to ccp.
   - Reenable talitos hash algorithms.
   - Add support for Hisilicon SoC RNG.
   - Add basic crypto driver for the MXC SCC.

  Others:

   - Do not allocate crypto hash tfm in NORECLAIM context in ecryptfs"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (77 commits)
  crypto: qat - change the adf_ctl_stop_devices to void
  crypto: caam - fix caam_jr_alloc() ret code
  crypto: vmx - comply with ABIs that specify vrsave as reserved.
  crypto: testmgr - Add a flag allowing the self-tests to be disabled at runtime.
  crypto: ccp - constify ccp_actions structure
  crypto: marvell/cesa - Use dma_pool_zalloc
  crypto: qat - make adf_vf_isr.c dependant on IOV config
  crypto: qat - Fix typo in comments
  lib: asn1_decoder - add MODULE_LICENSE("GPL")
  crypto: omap-sham - Use dma_request_chan() for requesting DMA channel
  crypto: omap-des - Use dma_request_chan() for requesting DMA channel
  crypto: omap-aes - Use dma_request_chan() for requesting DMA channel
  crypto: omap-des - Integrate with the crypto engine framework
  crypto: s5p-sss - fix incorrect usage of scatterlists api
  crypto: s5p-sss - Fix missed interrupts when working with 8 kB blocks
  crypto: s5p-sss - Use common BIT macro
  crypto: mxc-scc - fix unwinding in mxc_scc_crypto_register()
  crypto: mxc-scc - signedness bugs in mxc_scc_ablkcipher_req_init()
  crypto: talitos - fix ahash algorithms registration
  crypto: ccp - Ensure all dependencies are specified
  ...

For ethernet devices, net_device.name will be eth%d before
register_netdev() is called. Don't print the net_device name until
the format string is replaced.
Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com>
Cc: Marcel Ziswiler <marcel@ziswiler.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Barry Song <Baohua.Song@csr.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the necessary driver support for Management Firmware to
configure the device/firmware with the dcbx results. Management Firmware
is responsible for communicating the DCBX and driving the negotiation,
but the driver has responsibility of receiving async notification and
configuring the results in hw/fw. This patch also adds the dcbx support for
future protocols (e.g., FCoE) as preparation to their imminent submission.
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When reopening the network device on ra7795/salvator-x, e.g. after a
DHCP timeout:

    IP-Config: Reopening network devices...
    genirq: Flags mismatch irq 139. 00000000 (eth0:ch0:rx_be) vs. 00000000 (ravb e6800000.ethernet eth0: cannot request IRQ eth0:ch0:rx_be
    IP-Config: Failed to open eth0
    IP-Config: No network devices available

The "mismatch" is due to requesting an IRQ that is already in use,
while IRQF_PROBE_SHARED wasn't set.

However, the real cause is that ravb_close() doesn't release any of the
R-Car Gen3-specific secondary IRQs.

Add the missing free_irq() calls to fix this.

Fixes: f51bdc23 ("ravb: Add dma queue interrupt support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This line was indented more than it should be.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
10GbE Intel Wired LAN Driver Updates 2016-05-16

This series contains 2 fixes to ixgbe only.

Emil fixes transmit hangs when enabling SRIOV by swapping the parameters
in GENMASK in order to generate the correct mask.

Alex fixes his previous patch b83e3010 ("ixgbe/ixgbevf: Add support
for GSO partial") where he somehow transposed the location of setting
the VLAN features in netdev->features and the configuration of the
vlan_features.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Conflicts:
	drivers/hid/usbhid/hid-quirks.c

Merge branches 'for-4.6/upstream-fixes', 'for-4.7/asus', 'for-4.7/hidraw' and 'for-4.7/thingm' into for-linus

Merge branches 'for-4.7/core', 'for-4.7/livepatching-doc' and 'for-4.7/livepatching-ppc64' into for-linus

Backmerge to resolve a conflict in ovl_lookup_real();
"ovl_lookup_real(): use lookup_one_len_unlocked()" instead,
but it was too late in the cycle to rebase.

Merge tag 'device-properties-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull device properties update from Rafael Wysocki:
 "Generic device properties framework update.

  Just one commit reworking the handling of built-in properties
  initialization and updating a few drivers in accordance with the core
  framework changes"

* tag 'device-properties-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  device property: don't bother the drivers with struct property_set