- 10 Jan, 2014 3 commits
-
-
Steven Rostedt (Red Hat) authored
Currently there's no way to know what triggers exist on a kernel without looking at the source of the kernel or randomly trying out triggers. Instead of creating another file in the debugfs system, simply show what available triggers are there when cat'ing the trigger file when it has no events: [root /sys/kernel/debug/tracing]# cat events/sched/sched_switch/trigger # Available triggers: # traceon traceoff snapshot stacktrace enable_event disable_event This stays consistent with other debugfs files where meta data like this is always proceeded with a '#' at the start of the line so that tools can strip these out. Link: http://lkml.kernel.org/r/20140107103548.0a84536d@gandalf.local.homeSigned-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
Steven Rostedt (Red Hat) authored
The event trigger code that checks for callback triggers before and after recording of an event has lots of flags checks. This code is duplicated throughout the ftrace events, kprobes and system calls. They all do the exact same checks against the event flags. Added helper functions ftrace_trigger_soft_disabled(), event_trigger_unlock_commit() and event_trigger_unlock_commit_regs() that consolidated the code and these are used instead. Link: http://lkml.kernel.org/r/20140106222703.5e7dbba2@gandalf.local.homeAcked-by:
Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by:
-
Steven Rostedt (Red Hat) authored
The counters for the traceon and traceoff are only suppose to decrement when the trigger enables or disables tracing. It is not suppose to decrement every time the event is hit. Only decrement the counter if the trigger actually did something. Link: http://lkml.kernel.org/r/20140106223124.0e5fd0b4@gandalf.local.homeAcked-by:
-
- 06 Jan, 2014 2 commits
-
-
Tom Zanussi authored
There's no reason to use double-underscores for any variable name in ftrace_syscall_enter()/exit(), since those functions aren't generated and there's no need to avoid namespace collisions as with the event macros, which is where the original invocation code came from. Link: http://lkml.kernel.org/r/0b489c9d1f7ee315cff60fa0e4c2b433ade8ae0d.1389036657.git.tom.zanussi@linux.intel.comSigned-off-by:
-
Tom Zanussi authored
Add code to the kprobe/kretprobe event functions that will invoke any event triggers associated with a probe's ftrace_event_file. The code to do this is very similar to the invocation code already used to invoke the triggers associated with static events and essentially replaces the existing soft-disable checks with a superset that preserves the original behavior but adds the bits needed to support event triggers. Link: http://lkml.kernel.org/r/f2d49f157b608070045fdb26c9564d5a05a5a7d0.1389036657.git.tom.zanussi@linux.intel.comAcked-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by:
-
- 03 Jan, 2014 4 commits
-
-
Namhyung Kim authored
When kprobe-based dynamic event tracer is not enabled, it caused following build error: kernel/built-in.o: In function `traceprobe_update_arg': (.text+0x10c8dd): undefined reference to `fetch_symbol_u8' kernel/built-in.o: In function `traceprobe_update_arg': (.text+0x10c8e9): undefined reference to `fetch_symbol_u16' kernel/built-in.o: In function `traceprobe_update_arg': (.text+0x10c8f5): undefined reference to `fetch_symbol_u32' kernel/built-in.o: In function `traceprobe_update_arg': (.text+0x10c901): undefined reference to `fetch_symbol_u64' kernel/built-in.o: In function `traceprobe_update_arg': (.text+0x10c909): undefined reference to `fetch_symbol_string' kernel/built-in.o: In function `traceprobe_update_arg': (.text+0x10c913): undefined reference to `fetch_symbol_string_size' ... It was due to the fetch methods are referred from CHECK_FETCH_FUNCS macro and since it was only defined in trace_kprobe.c. Move NULL definition of such fetch functions to the header file. Note, it also requires CONFIG_BRANCH_PROFILING enabled to trigger this failure as well. This is because the "fetch_symbol_*" variables are referenced in a "else if" statement that will only call update_symbol_cache(), which is a static inline stub function when CONFIG_KPROBE_EVENT is not enabled. gcc is smart enough to optimize this "else if" out and that also removes the code that references the undefined variables. But when BRANCH_PROFILING is enabled, it fools gcc into keeping the if statement around and thus references the undefined symbols and fails to build. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Signed-off-by:
-
Namhyung Kim authored
Enable to fetch data from a file offset. Currently it only supports fetching from same binary uprobe set. It'll translate the file offset to a proper virtual address in the process. The syntax is "@+OFFSET" as it does similar to normal memory fetching (@ADDR) which does no address translation. Suggested-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
-
Oleg Nesterov authored
uprobe_trace_print() and uprobe_perf_print() need to pass the additional info to call_fetch() methods, currently there is no simple way to do this. current->utask looks like a natural place to hold this info, but we need to allocate it before handler_chain(). This is a bit unfortunate, perhaps we will find a better solution later, but this is simple and should work right now. Signed-off-by:
-
Namhyung Kim authored
Enable to fetch other types of argument for the uprobes. IOW, we can access stack, memory, deref, bitfield and retval from uprobes now. The format for the argument types are same as kprobes (but @SYMBOL type is not supported for uprobes), i.e: @ADDR : Fetch memory at ADDR $stackN : Fetch Nth entry of stack (N >= 0) $stack : Fetch stack address $retval : Fetch return value +|-offs(FETCHARG) : Fetch memory at FETCHARG +|- offs address Note that the retval only can be used with uretprobes. Original-patch-by:
Hyeoncheol Lee <cheol.lee@lge.com> Acked-by:
-
- 02 Jan, 2014 16 commits
-
-
Namhyung Kim authored
Fetching from user space should be done in a non-atomic context. So use a per-cpu buffer and copy its content to the ring buffer atomically. Note that we can migrate during accessing user memory thus use a per-cpu mutex to protect concurrent accesses. This is needed since we'll be able to fetch args from an user memory which can be swapped out. Before that uprobes could fetch args from registers only which saved in a kernel space. While at it, use __get_data_size() and store_trace_args() to reduce code duplication. And add struct uprobe_cpu_buffer and its helpers as suggested by Oleg. Reviewed-by:
-
Namhyung Kim authored
Currently uprobes don't pass is_return to the argument parser so that it cannot make use of "$retval" fetch method since it only works for return probes. Reviewed-by:
-
Namhyung Kim authored
Use separate method to fetch from memory. Move existing functions to trace_kprobe.c and make them static. Also add new memory fetch implementation for uprobes. Acked-by:
-
Hyeoncheol Lee authored
The deref fetch methods access a memory region but it assumes that it's a kernel memory since uprobes does not support them. Add ->fetch and ->fetch_size member in order to provide a proper access methods for supporting uprobes. Acked-by:
-
Namhyung Kim authored
Move existing functions to trace_kprobe.c and add NULL entries to the uprobes fetch type table. I don't make them static since some generic routines like update/free_XXX_fetch_param() require pointers to the functions. Acked-by:
-
Namhyung Kim authored
Use separate method to fetch from stack. Move existing functions to trace_kprobe.c and make them static. Also add new stack fetch implementation for uprobes. Acked-by:
-
Namhyung Kim authored
Use separate fetch_type_table for kprobes and uprobes. It currently shares all fetch methods but some of them will be implemented differently later. This is not to break build if [ku]probes is configured alone (like !CONFIG_KPROBE_EVENT and CONFIG_UPROBE_EVENT). So I added '__weak' to the table declaration so that it can be safely omitted when it configured out. Acked-by:
-
Namhyung Kim authored
Move fetch function helper macros/functions to the header file and make them external. This is preparation of supporting uprobe fetch table in next patch. Acked-by:
-
Namhyung Kim authored
The set_print_fmt() functions are implemented almost same for [ku]probes. Move it to a common place and get rid of the duplication. Acked-by:
-
Namhyung Kim authored
The __get_data_size() and store_trace_args() will be used by uprobes too. Move them to a common location. Acked-by:
-
Namhyung Kim authored
Convert struct trace_uprobe to make use of the common trace_probe structure. Reviewed-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by:
-
Namhyung Kim authored
There are functions that can be shared to both of kprobes and uprobes. Separate common data structure to struct trace_probe and use it from the shared functions. Acked-by:
-
Namhyung Kim authored
The print format of s32 type was "ld" and it's casted to "long". So it turned out to print 4294967295 for "-1" on 64-bit systems. Not sure whether it worked well on 32-bit systems. Anyway, it doesn't need to have cast argument at all since it already casted using type pointer - just get rid of it. Thanks to Oleg for pointing that out. And print 0x prefix for unsigned type as it shows hex numbers. Suggested-by:
-
Namhyung Kim authored
The uprobe syntax requires an offset after a file path not a symbol. Reviewed-by:
-
Steven Rostedt (Red Hat) authored
The filter field of the event_trigger_data structure is protected under RCU sched locks. It was not annotated as such, and after doing so, sparse pointed out several locations that required fix ups. Reported-by:
-
Steven Rostedt (Red Hat) authored
Trace event triggers added a lseek that uses the ftrace_filter_lseek() function. Unfortunately, when function tracing is not configured in that function is not defined and the kernel fails to build. This is the second time that function was added to a file ops and it broke the build due to requiring special config dependencies. Make a generic tracing_lseek() that all the tracing utilities may use. Also, modify the old ftrace_filter_lseek() to return 0 instead of 1 on WRONLY. Not sure why it was a 1 as that does not make sense. This also changes the old tracing_seek() to modify the file pos pointer on WRONLY as well. Reported-by:
-
- 22 Dec, 2013 6 commits
-
-
Tom Zanussi authored
Provide a basic overview of trace event triggers and document the available trigger commands, along with a few simple examples. Link: http://lkml.kernel.org/r/2595dd9196d7b553049611f2a3f849ca75d650a2.1382622043.git.tom.zanussi@linux.intel.comSigned-off-by:
-
Tom Zanussi authored
Add a generic event_command.set_trigger_filter() op implementation and have the current set of trigger commands use it - this essentially gives them all support for filters. Syntactically, filters are supported by adding 'if <filter>' just after the command, in which case only events matching the filter will invoke the trigger. For example, to add a filter to an enable/disable_event command: echo 'enable_event:system:event if common_pid == 999' > \ .../othersys/otherevent/trigger The above command will only enable the system:event event if the common_pid field in the othersys:otherevent event is 999. As another example, to add a filter to a stacktrace command: echo 'stacktrace if common_pid == 999' > \ .../somesys/someevent/trigger The above command will only trigger a stacktrace if the common_pid field in the event is 999. The filter syntax is the same as that described in the 'Event filtering' section of Documentation/trace/events.txt. Because triggers can now use filters, the trigger-invoking logic needs to be moved in those cases - e.g. for ftrace_raw_event_calls, if a trigger has a filter associated with it, the trigger invocation now needs to happen after the { assign; } part of the call, in order for the trigger condition to be tested. There's still a SOFT_DISABLED-only check at the top of e.g. the ftrace_raw_events function, so when an event is soft disabled but not because of the presence of a trigger, the original SOFT_DISABLED behavior remains unchanged. There's also a bit of trickiness in that some triggers need to avoid being invoked while an event is currently in the process of being logged, since the trigger may itself log data into the trace buffer. Thus we make sure the current event is committed before invoking those triggers. To do that, we split the trigger invocation in two - the first part (event_triggers_call()) checks the filter using the current trace record; if a command has the post_trigger flag set, it sets a bit for itself in the return value, otherwise it directly invoks the trigger. Once all commands have been either invoked or set their return flag, event_triggers_call() returns. The current record is then either committed or discarded; if any commands have deferred their triggers, those commands are finally invoked following the close of the current event by event_triggers_post_call(). To simplify the above and make it more efficient, the TRIGGER_COND bit is introduced, which is set only if a soft-disabled trigger needs to use the log record for filter testing or needs to wait until the current log record is closed. The syscall event invocation code is also changed in analogous ways. Because event triggers need to be able to create and free filters, this also adds a couple external wrappers for the existing create_filter and free_filter functions, which are too generic to be made extern functions themselves. Link: http://lkml.kernel.org/r/7164930759d8719ef460357f143d995406e4eead.1382622043.git.tom.zanussi@linux.intel.comSigned-off-by: -
Steven Rostedt (Red Hat) authored
Now that event triggers use ftrace_event_file(), it needs to be outside the #ifdef CONFIG_DYNAMIC_FTRACE, as it can now be used when that is not defined. Signed-off-by: -
Tom Zanussi authored
Add 'enable_event' and 'disable_event' event_command commands. enable_event and disable_event event triggers are added by the user via these commands in a similar way and using practically the same syntax as the analagous 'enable_event' and 'disable_event' ftrace function commands, but instead of writing to the set_ftrace_filter file, the enable_event and disable_event triggers are written to the per-event 'trigger' files: echo 'enable_event:system:event' > .../othersys/otherevent/trigger echo 'disable_event:system:event' > .../othersys/otherevent/trigger The above commands will enable or disable the 'system:event' trace events whenever the othersys:otherevent events are hit. This also adds a 'count' version that limits the number of times the command will be invoked: echo 'enable_event:system:event:N' > .../othersys/otherevent/trigger echo 'disable_event:system:event:N' > .../othersys/otherevent/trigger Where N is the number of times the command will be invoked. The above commands will will enable or disable the 'system:event' trace events whenever the othersys:otherevent events are hit, but only N times. This also makes the find_event_file() helper function extern, since it's useful to use from other places, such as the event triggers code, so make it accessible. Link: http://lkml.kernel.org/r/f825f3048c3f6b026ee37ae5825f9fc373451828.1382622043.git.tom.zanussi@linux.intel.comSigned-off-by: -
Tom Zanussi authored
Add 'stacktrace' event_command. stacktrace event triggers are added by the user via this command in a similar way and using practically the same syntax as the analogous 'stacktrace' ftrace function command, but instead of writing to the set_ftrace_filter file, the stacktrace event trigger is written to the per-event 'trigger' files: echo 'stacktrace' > .../tracing/events/somesys/someevent/trigger The above command will turn on stacktraces for someevent i.e. whenever someevent is hit, a stacktrace will be logged. This also adds a 'count' version that limits the number of times the command will be invoked: echo 'stacktrace:N' > .../tracing/events/somesys/someevent/trigger Where N is the number of times the command will be invoked. The above command will log N stacktraces for someevent i.e. whenever someevent is hit N times, a stacktrace will be logged. Link: http://lkml.kernel.org/r/0c30c008a0828c660aa0e1bbd3255cf179ed5c30.1382622043.git.tom.zanussi@linux.intel.comSigned-off-by: -
Tom Zanussi authored
Add 'snapshot' event_command. snapshot event triggers are added by the user via this command in a similar way and using practically the same syntax as the analogous 'snapshot' ftrace function command, but instead of writing to the set_ftrace_filter file, the snapshot event trigger is written to the per-event 'trigger' files: echo 'snapshot' > .../somesys/someevent/trigger The above command will turn on snapshots for someevent i.e. whenever someevent is hit, a snapshot will be done. This also adds a 'count' version that limits the number of times the command will be invoked: echo 'snapshot:N' > .../somesys/someevent/trigger Where N is the number of times the command will be invoked. The above command will snapshot N times for someevent i.e. whenever someevent is hit N times, a snapshot will be done. Also adds a new tracing_alloc_snapshot() function - the existing tracing_snapshot_alloc() function is a special version of tracing_snapshot() that also does the snapshot allocation - the snapshot triggers would like to be able to do just the allocation but not take a snapshot; the existing tracing_snapshot_alloc() in turn now also calls tracing_alloc_snapshot() underneath to do that allocation. Link: http://lkml.kernel.org/r/c9524dd07ce01f9dcbd59011290e0a8d5b47d7ad.1382622043.git.tom.zanussi@linux.intel.comSigned-off-by:
-
- 20 Dec, 2013 2 commits
-
-
Tom Zanussi authored
Add 'traceon' and 'traceoff' event_command commands. traceon and traceoff event triggers are added by the user via these commands in a similar way and using practically the same syntax as the analagous 'traceon' and 'traceoff' ftrace function commands, but instead of writing to the set_ftrace_filter file, the traceon and traceoff triggers are written to the per-event 'trigger' files: echo 'traceon' > .../tracing/events/somesys/someevent/trigger echo 'traceoff' > .../tracing/events/somesys/someevent/trigger The above command will turn tracing on or off whenever someevent is hit. This also adds a 'count' version that limits the number of times the command will be invoked: echo 'traceon:N' > .../tracing/events/somesys/someevent/trigger echo 'traceoff:N' > .../tracing/events/somesys/someevent/trigger Where N is the number of times the command will be invoked. The above commands will will turn tracing on or off whenever someevent is hit, but only N times. Some common register/unregister_trigger() implementations of the event_command reg()/unreg() callbacks are also provided, which add and remove trigger instances to the per-event list of triggers, and arm/disarm them as appropriate. event_trigger_callback() is a general-purpose event_command func() implementation that orchestrates command parsing and registration for most normal commands. Most event commands will use these, but some will override and possibly reuse them. The event_trigger_init(), event_trigger_free(), and event_trigger_print() functions are meant to be common implementations of the event_trigger_ops init(), free(), and print() ops, respectively. Most trigger_ops implementations will use these, but some will override and possibly reuse them. Link: http://lkml.kernel.org/r/00a52816703b98d2072947478dd6e2d70cde5197.1382622043.git.tom.zanussi@linux.intel.comSigned-off-by: -
Tom Zanussi authored
Add a 'trigger' file for each trace event, enabling 'trace event triggers' to be set for trace events. 'trace event triggers' are patterned after the existing 'ftrace function triggers' implementation except that triggers are written to per-event 'trigger' files instead of to a single file such as the 'set_ftrace_filter' used for ftrace function triggers. The implementation is meant to be entirely separate from ftrace function triggers, in order to keep the respective implementations relatively simple and to allow them to diverge. The event trigger functionality is built on top of SOFT_DISABLE functionality. It adds a TRIGGER_MODE bit to the ftrace_event_file flags which is checked when any trace event fires. Triggers set for a particular event need to be checked regardless of whether that event is actually enabled or not - getting an event to fire even if it's not enabled is what's already implemented by SOFT_DISABLE mode, so trigger mode directly reuses that. Event trigger essentially inherit the soft disable logic in __ftrace_event_enable_disable() while adding a bit of logic and trigger reference counting via tm_ref on top of that in a new trace_event_trigger_enable_disable() function. Because the base __ftrace_event_enable_disable() code now needs to be invoked from outside trace_events.c, a wrapper is also added for those usages. The triggers for an event are actually invoked via a new function, event_triggers_call(), and code is also added to invoke them for ftrace_raw_event calls as well as syscall events. The main part of the patch creates a new trace_events_trigger.c file to contain the trace event triggers implementation. The standard open, read, and release file operations are implemented here. The open() implementation sets up for the various open modes of the 'trigger' file. It creates and attaches the trigger iterator and sets up the command parser. If opened for reading set up the trigger seq_ops. The read() implementation parses the event trigger written to the 'trigger' file, looks up the trigger command, and passes it along to that event_command's func() implementation for command-specific processing. The release() implementation does whatever cleanup is needed to release the 'trigger' file, like releasing the parser and trigger iterator, etc. A couple of functions for event command registration and unregistration are added, along with a list to add them to and a mutex to protect them, as well as an (initially empty) registration function to add the set of commands that will be added by future commits, and call to it from the trace event initialization code. also added are a couple trigger-specific data structures needed for these implementations such as a trigger iterator and a struct for trigger-specific data. A couple structs consisting mostly of function meant to be implemented in command-specific ways, event_command and event_trigger_ops, are used by the generic event trigger command implementations. They're being put into trace.h alongside the other trace_event data structures and functions, in the expectation that they'll be needed in several trace_event-related files such as trace_events_trigger.c and trace_events.c. The event_command.func() function is meant to be called by the trigger parsing code in order to add a trigger instance to the corresponding event. It essentially coordinates adding a live trigger instance to the event, and arming the triggering the event. Every event_command func() implementation essentially does the same thing for any command: - choose ops - use the value of param to choose either a number or count version of event_trigger_ops specific to the command - do the register or unregister of those ops - associate a filter, if specified, with the triggering event The reg() and unreg() ops allow command-specific implementations for event_trigger_op registration and unregistration, and the get_trigger_ops() op allows command-specific event_trigger_ops selection to be parameterized. When a trigger instance is added, the reg() op essentially adds that trigger to the triggering event and arms it, while unreg() does the opposite. The set_filter() function is used to associate a filter with the trigger - if the command doesn't specify a set_filter() implementation, the command will ignore filters. Each command has an associated trigger_type, which serves double duty, both as a unique identifier for the command as well as a value that can be used for setting a trigger mode bit during trigger invocation. The signature of func() adds a pointer to the event_command struct, used to invoke those functions, along with a command_data param that can be passed to the reg/unreg functions. This allows func() implementations to use command-specific blobs and supports code re-use. The event_trigger_ops.func() command corrsponds to the trigger 'probe' function that gets called when the triggering event is actually invoked. The other functions are used to list the trigger when needed, along with a couple mundane book-keeping functions. This also moves event_file_data() into trace.h so it can be used outside of trace_events.c. Link: http://lkml.kernel.org/r/316d95061accdee070aac8e5750afba0192fa5b9.1382622043.git.tom.zanussi@linux.intel.comSigned-off-by:
-
- 15 Dec, 2013 7 commits
-
-
Linus Torvalds authored
-
Matias Bjorling authored
For NUMA systems, initializing the blk-mq layer and using per node hctx. We initialize submit queues to 1, while blk-mq nr_hw_queues is initialized to the number of NUMA nodes. This makes the null_init_hctx function overwrite memory outside of what it allocated. In my case it lead to writing garbage into struct request_queue's mq_map. Signed-off-by:
Matias Bjorling <m@bjorling.me> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Sergey Senozhatsky authored
Since commit ec39f64b ("drm/radeon/dpm: Convert to use devm_hwmon_register_with_groups") radeon_hwmon_init() is using hwmon_device_register_with_groups(), which sets `rdev' as a device private driver_data, while hwmon_attributes_visible() and radeon_hwmon_show_temp_thresh() are still waiting for `drm_device'. Fix them by using dev_get_drvdata(), in order to avoid this oops: BUG: unable to handle kernel paging request at 0000000000001e28 IP: [<ffffffffa02ae8b4>] hwmon_attributes_visible+0x18/0x3d [radeon] PGD 15057e067 PUD 151a8e067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Call Trace: internal_create_group+0x114/0x1d9 sysfs_create_group+0xe/0x10 sysfs_create_groups+0x22/0x5f device_add+0x34f/0x501 device_register+0x15/0x18 hwmon_device_register_with_groups+0xb5/0xed radeon_hwmon_init+0x56/0x7c [radeon] radeon_pm_init+0x134/0x7e5 [radeon] radeon_modeset_init+0x75f/0x8ed [radeon] radeon_driver_load_kms+0xc6/0x187 [radeon] drm_dev_register+0xf9/0x1b4 [drm] drm_get_pci_dev+0x98/0x129 [drm] radeon_pci_probe+0xa3/0xac [radeon] pci_device_probe+0x6e/0xcf driver_probe_device+0x98/0x1c4 __driver_attach+0x5c/0x7e bus_for_each_dev+0x7b/0x85 driver_attach+0x19/0x1b bus_add_driver+0x104/0x1ce driver_register+0x89/0xc5 __pci_register_driver+0x58/0x5b drm_pci_init+0x86/0xea [drm] radeon_init+0x97/0x1000 [radeon] do_one_initcall+0x7f/0x117 load_module+0x1583/0x1bb4 SyS_init_module+0xa0/0xaf Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Alexander Deucher <Alexander.Deucher@amd.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Revert CHECKSUM_COMPLETE optimization in pskb_trim_rcsum(), I can't figure out why it breaks things. 2) Fix comparison in netfilter ipset's hash_netnet4_data_equal(), it was basically doing "x == x", from Dave Jones. 3) Freescale FEC driver was DMA mapping the wrong number of bytes, from Sebastian Siewior. 4) Blackhole and prohibit routes in ipv6 were not doing the right thing because their ->input and ->output methods were not being assigned correctly. Now they behave properly like their ipv4 counterparts. From Kamala R. 5) Several drivers advertise the NETIF_F_FRAGLIST capability, but really do not support this feature and will send garbage packets if fed fraglist SKBs. From Eric Dumazet. 6) Fix long standing user triggerable BUG_ON over loopback in RDS protocol stack, from Venkat Venkatsubra. 7) Several not so common code paths can potentially try to invoke packet scheduler actions that might be NULL without checking. Shore things up by either 1) defining a method as mandatory and erroring on registration if that method is NULL 2) defininig a method as optional and the registration function hooks up a default implementation when NULL is seen. From Jamal Hadi Salim. 8) Fix fragment detection in xen-natback driver, from Paul Durrant. 9) Kill dangling enter_memory_pressure method in cg_proto ops, from Eric W Biederman. 10) SKBs that traverse namespaces should have their local_df cleared, from Hannes Frederic Sowa. 11) IOCB file position is not being updated by macvtap_aio_read() and tun_chr_aio_read(). From Zhi Yong Wu. 12) Don't free virtio_net netdev before releasing all of the NAPI instances. From Andrey Vagin. 13) Procfs entry leak in xt_hashlimit, from Sergey Popovich. 14) IPv6 routes that are no cached routes should not count against the garbage collection limits. We had this almost right, but were missing handling addrconf generated routes properly. From Hannes Frederic Sowa. 15) fib{4,6}_rule_suppress() have to consider potentially seeing NULL route info when they are called, from Stefan Tomanek. 16) TUN and MACVTAP have had truncated packet signalling for some time, fix from Jason Wang. 17) Fix use after frrr in __udp4_lib_rcv(), from Eric Dumazet. 18) xen-netback does not interpret the NAPI budget properly for TX work, fix from Paul Durrant. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (132 commits) igb: Fix for issue where values could be too high for udelay function. i40e: fix null dereference xen-netback: fix gso_prefix check net: make neigh_priv_len in struct net_device 16bit instead of 8bit drivers: net: cpsw: fix for cpsw crash when build as modules xen-netback: napi: don't prematurely request a tx event xen-netback: napi: fix abuse of budget sch_tbf: use do_div() for 64-bit divide udp: ipv4: must add synchronization in udp_sk_rx_dst_set() net:fec: remove duplicate lines in comment about errata ERR006358 Revert "8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature" 8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature xen-netback: make sure skb linear area covers checksum field net: smc91x: Fix device tree based configuration so it's usable udp: ipv4: fix potential use after free in udp_v4_early_demux() macvtap: signal truncated packets tun: unbreak truncated packet signalling net: sched: htb: fix the calculation of quantum net: sched: tbf: fix the calculation of max_size micrel: add support for KSZ8041RNLI ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Peter Anvin: "This is a pretty small batch: The biggest single change is to stop using EFI time services on 32-bit platforms. This matches our current behavior on 64-bit platforms as we already had ruled them out there as being too unreliable. Turns out that affects 32-bit platforms, too. One NULL pointer fix for SGI UV. Two minor build fixes, one of which only affects icc and the other which affects icc and future versions or nonstandard default settings of gcc" * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, efi: Don't use (U)EFI time services on 32 bit x86, build, icc: Remove uninitialized_var() from compiler-intel.h x86/UV: Fix NULL pointer dereference in uv_flush_tlb_others() if the 'nobau' boot option is used x86, build: Pass in additional -mno-mmx, -mno-sse options
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI updates from Bjorn Helgaas: "PCI device hotplug - Move device_del() from pci_stop_dev() to pci_destroy_dev() (Rafael Wysocki) Host bridge drivers - Update maintainers for DesignWare, i.MX6, Armada, R-Car (Bjorn Helgaas) - mvebu: Return 'unsupported' for Interrupt Line and Interrupt Pin (Jason Gunthorpe) Miscellaneous - Avoid unnecessary CPU switch when calling .probe() (Alexander Duyck) - Revert "workqueue: allow work_on_cpu() to be called recursively" (Bjorn Helgaas) - Disable Bus Master only on kexec reboot (Khalid Aziz) - Omit PCI ID macro strings to shorten quirk names for LTO (Michal Marek)" * tag 'pci-v3.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers PCI: Disable Bus Master only on kexec reboot PCI: mvebu: Return 'unsupported' for Interrupt Line and Interrupt Pin PCI: Omit PCI ID macro strings to shorten quirk names PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev() Revert "workqueue: allow work_on_cpu() to be called recursively" PCI: Avoid unnecessary CPU switch when calling driver .probe() method -
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull SELinux fixes from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: selinux: process labeled IPsec TCP SYN-ACK packets properly in selinux_ip_postroute() selinux: look for IPsec labels on both inbound and outbound packets selinux: handle TCP SYN-ACK packets correctly in selinux_ip_postroute() selinux: handle TCP SYN-ACK packets correctly in selinux_ip_output() selinux: fix possible memory leak
-
