- 18 Feb, 2011 30 commits
-
-
Krzysztof Hałasa authored
Signed-off-by:
Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Krzysztof Hałasa authored
This driver supports both Solo-6010 and Solo-6110 chips anyway. Renamed solo6010.h -> solo6x10.h. Signed-off-by:
-
Krzysztof Hałasa authored
Signed-off-by:
-
Krzysztof Hałasa authored
Signed-off-by:
-
Krzysztof Hałasa authored
Solo-6110 only supports 8-byte alignment anyway. Signed-off-by:
-
Krzysztof Hałasa authored
This will make them maintainable. Also, it now works on big-endian systems. This is the slow path (done every 1+ second, per channel) so I guess there is no need to cache the results. I have removed CBR-related bits from the MPEG4 VOL header since we can't do CBR (at least yet). Signed-off-by:
-
Krzysztof Hałasa authored
This makes it possible to request full resolution (704x576 or 704x480) independently of the color system used (PAL or NTSC). Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
Mike McCormack <mikem@ring3k.org> Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Andres Salomon authored
DCON builds properly now; we can drop the config dep on CONFIG_BROKEN. Signed-off-by:
Andres Salomon <dilinger@queued.net> Signed-off-by:
-
Andres Salomon authored
- Move bl_val and bl_dev into dcon_priv struct.... - The only time we ever read the backlight val from the dcon is at probe time. Rather than calling dcon_get_backlight for that, just read from the register. - Drop dcon_get_backlight; it's just returning dcon->bl_val. - Rename dcon_set_backlight_hw to dcon_set_backlight, and drop the old dcon_set_backlight function. Move contents of old dcon_set_backlight function into dconbl_set. - Shuffle backlight_ops callbacks around to be closer to struct, and rename them. - Make use of new backlight_properties arg to backlight_device_register, drop old code that set this manually. Signed-off-by:
-
Andres Salomon authored
Global variables dcon_switched, dcon_irq_time, and dcon_load_time can all be moved into the dcon_priv struct now that dcon_interrupt has access to dcon_priv. Signed-off-by: -
Andres Salomon authored
This moves dcon_source and dcon_pending into the dcon_priv struct. Because these variables are used by the IRQ handler (which is registered in the model-specific callbacks), we end up needing to move dcon_priv into olpc_dcon.h. This also changes the IRQ registration to use the dcon_priv pointer as dev_id, instead of dcon_driver. Signed-off-by:
-
Andres Salomon authored
This adds CONFIG_FB_OLPC_DCON_1 and CONFIG_FB_OLPC_DCON_1_5 options for allowing selection of XO-1 and/or XO-1.5 DCON support. In the process, it also forces the xo_1.c and xo_1_5.c files to build as separate units, correctly selects between XO-1 and XO-1.5 at runtime, and adds some hacks to allow xo_1_5.c to build. This isn't the cleanest patch, but it'll get better as more global variables are dropped. Signed-off-by:
-
Andres Salomon authored
Remove code related to XO-1.5 prototype boards. Signed-off-by:
-
Marek Belisko authored
olpc_dcon driver use self invented _strtoul function which make similar check like strict_strtoul just extend for space checking at last string place. Normally access to sys file looks echo 1024 > /sys/... so space could be considered as error character and we could simplify code using just strict_strtoul function instead self invented. Signed-off-by:
Marek Belisko <marek.belisko@open-nandra.com> Signed-off-by:
-
Andres Salomon authored
- move fbinfo and ignore_fb_events into dcon_priv - add calls to {un,}lock_fb_info before calling fb_blank - fail to load the driver if there are no registered framebuffers That last one fixes a potential oops, where if the dcon driver loads without a framebuffer registered, fb_blank will end up being passed a NULL (and will attempt to dereference it). Signed-off-by: -
Andres Salomon authored
This also fixes a think-o where I was pulling the dcon struct out of thin air in the fb event callback. Signed-off-by:
-
Andres Salomon authored
Just use a regular 'bool foo', rather than 'bool foo:1'. Signed-off-by:
-
wwang authored
Add static modifier before some functions and global variables. Signed-off-by:
wwang <wei_wang@realsil.com.cn> Signed-off-by:
-
wwang authored
Delete a function named rtsx_transfer_sglist which won't be called. Signed-off-by:
-
Greg Kroah-Hartman authored
This is to resolve a merge conflict with: drivers/staging/zram/zram_drv.c as pointed out by Stephen Rothwell Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by:
-
- 16 Feb, 2011 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommuLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: set flow handler for secondary interrupt controller of 5249 m68knommu: remove use of IRQ_FLG_LOCK from 68360 platform support m68knommu: fix dereference of port.tty m68knommu: add missing linker __modver section m68knommu: fix mis-named variable int set_irq_chip loop m68knommu: add optimize memmove() function m68k: remove arch specific non-optimized memcmp() m68knommu: fix use of un-defined _TIF_WORK_MASK m68knommu: Rename m548x_wdt.c to m54xx_wdt.c m68knommu: fix m548x_wdt.c compilation after headers renaming m68knommu: Remove dependencies on nonexistent M68KNOMMU
-
- 15 Feb, 2011 8 commits
-
-
Greg Ungerer authored
The secondary interrupt controller of the ColdFire 5249 code is not setting the edge triggered flow handler. Set it. Signed-off-by:Greg Ungerer <gerg@uclinux.org>
-
Greg Ungerer authored
The m68knommu arch does not define or use IRQ_FLG_LOCK in its irq subsystem. Remove obsolete use of it. Signed-off-by: -
Greg Ungerer authored
The struct_tty associated with a port is now a direct pointer from within the local private driver info struct. So fix all uses of it. Signed-off-by: -
Greg Ungerer authored
Add missing linker section __modver to fix: LD vmlinux /usr/local/bin/../m68k-uclinux/bin/ld.real: error: no memory region specified for loadable section `__modver' Signed-off-by: -
Greg Ungerer authored
Compiling for 68360 targets gives: CC arch/m68knommu/platform/68360/ints.o arch/m68knommu/platform/68360/ints.c: In function ‘init_IRQ’: arch/m68knommu/platform/68360/ints.c:135:16: error: ‘irq’ undeclared (first use in this function) arch/m68knommu/platform/68360/ints.c:135:16: note: each undeclared identifier is reported only once for each function it appears in Fix variable name used. Signed-off-by: -
Greg Ungerer authored
Add an m68k/coldfire optimized memmove() function for the m68knommu arch. This is the same function as used by m68k. Simple speed tests show this is faster once buffers are larger than 4 bytes, and significantly faster on much larger buffers (4 times faster above about 100 bytes). This also goes part of the way to fixing a regression caused by commit ea61bc46 ("m68k/m68knommu: merge MMU and non-MMU string.h"), which breaks non-coldfire non-mmu builds (which is the 68x328 and 68360 families). They currently have no memmove() fucntion defined, since there was none in the m68knommu/lib functions. Signed-off-by:
-
Greg Ungerer authored
The m68k arch implements its own memcmp() function. It is not optimized in any way (it is the most strait forward coding of memcmp you can get). Remove it and use the kernels standard memcmp() implementation. This also goes part of the way to fixing a regression caused by commit ea61bc46 ("m68k/m68knommu: merge MMU and non-MMU string.h"), which breaks non-coldfire non-mmu builds (which is the 68x328 and 68360 families). They currently have no memcmp() function defined, since there is none in the m68knommu/lib functions. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (27 commits) drm/radeon/kms: hopefully fix pll issues for real (v3) drm/radeon/kms: add bounds checking to avivo pll algo drm: fix wrong usages of drm_device in DRM Developer's Guide drm/radeon/kms: fix a few more atombios endian issues drm/radeon/kms: improve 6xx/7xx CS error output drm/radeon/kms: check AA resolve registers on r300 drm/radeon/kms: fix tracking of BLENDCNTL, COLOR_CHANNEL_MASK, and GB_Z on r300 drm/radeon/kms: use linear aligned for evergreen/ni bo blits drm/radeon/kms: use linear aligned for 6xx/7xx bo blits drm/radeon: fix race between GPU reset and TTM delayed delete thread. drm/radeon/kms: evergreen/ni big endian fixes (v2) drm/radeon/kms: 6xx/7xx big endian fixes drm/radeon/kms: atombios big endian fixes drm/radeon: 6xx/7xx non-kms endian fixes drm/radeon/kms: optimize CS state checking for r100->r500 drm: do not leak kernel addresses via /proc/dri/*/vma drm/radeon/kms: add connector table for mac g5 9600 radeon mkregtable: Add missing fclose() calls drm/radeon/kms: fix interlaced modes on dce4+ drm/radeon: fix memory debugging since d961db75 ...
-
