- 15 Dec, 2014 4 commits
-
-
Mahesh Salgaonkar authored
When we get an HMI (hypervisor maintenance interrupt) while in a guest, we see that guest enters into paused state. The reason is, in kvmppc_handle_exit_hv it falls through default path and returns to host instead of resuming guest. This causes guest to enter into paused state. HMI is a hypervisor only interrupt and it is safe to resume the guest since the host has handled it already. This patch adds a switch case to resume the guest. Without this patch we see guest entering into paused state with following console messages: [ 3003.329351] Severe Hypervisor Maintenance interrupt [Recovered] [ 3003.329356] Error detail: Timer facility experienced an error [ 3003.329359] HMER: 0840000000000000 [ 3003.329360] TFMR: 4a12000980a84000 [ 3003.329366] vcpu c0000007c35094c0 (40): [ 3003.329368] pc = c0000000000c2ba0 msr = 8000000000009032 trap = e60 [ 3003.329370] r 0 = c00000000021ddc0 r16 = 0000000000000046 [ 3003.329372] r 1 = c00000007a02bbd0 r17 = 00003ffff27d5d98 [ 3003.329375] r 2 = c0000000010980b8 r18 = 00001fffffc9a0b0 [ 3003.329377] r 3 = c00000000142d6b8 r19 = c00000000142d6b8 [ 3003.329379] r 4 = 0000000000000002 r20 = 0000000000000000 [ 3003.329381] r 5 = c00000000524a110 r21 = 0000000000000000 [ 3003.329383] r 6 = 0000000000000001 r22 = 0000000000000000 [ 3003.329386] r 7 = 0000000000000000 r23 = c00000000524a110 [ 3003.329388] r 8 = 0000000000000000 r24 = 0000000000000001 [ 3003.329391] r 9 = 0000000000000001 r25 = c00000007c31da38 [ 3003.329393] r10 = c0000000014280b8 r26 = 0000000000000002 [ 3003.329395] r11 = 746f6f6c2f68656c r27 = c00000000524a110 [ 3003.329397] r12 = 0000000028004484 r28 = c00000007c31da38 [ 3003.329399] r13 = c00000000fe01400 r29 = 0000000000000002 [ 3003.329401] r14 = 0000000000000046 r30 = c000000003011e00 [ 3003.329403] r15 = ffffffffffffffba r31 = 0000000000000002 [ 3003.329404] ctr = c00000000041a670 lr = c000000000272520 [ 3003.329405] srr0 = c00000000007e8d8 srr1 = 9000000000001002 [ 3003.329406] sprg0 = 0000000000000000 sprg1 = c00000000fe01400 [ 3003.329407] sprg2 = c00000000fe01400 sprg3 = 0000000000000005 [ 3003.329408] cr = 48004482 xer = 2000000000000000 dsisr = 42000000 [ 3003.329409] dar = 0000010015020048 [ 3003.329410] fault dar = 0000010015020048 dsisr = 42000000 [ 3003.329411] SLB (8 entries): [ 3003.329412] ESID = c000000008000000 VSID = 40016e7779000510 [ 3003.329413] ESID = d000000008000001 VSID = 400142add1000510 [ 3003.329414] ESID = f000000008000004 VSID = 4000eb1a81000510 [ 3003.329415] ESID = 00001f000800000b VSID = 40004fda0a000d90 [ 3003.329416] ESID = 00003f000800000c VSID = 400039f536000d90 [ 3003.329417] ESID = 000000001800000d VSID = 0001251b35150d90 [ 3003.329417] ESID = 000001000800000e VSID = 4001e46090000d90 [ 3003.329418] ESID = d000080008000019 VSID = 40013d349c000400 [ 3003.329419] lpcr = c048800001847001 sdr1 = 0000001b19000006 last_inst = ffffffff [ 3003.329421] trap=0xe60 | pc=0xc0000000000c2ba0 | msr=0x8000000000009032 [ 3003.329524] Severe Hypervisor Maintenance interrupt [Recovered] [ 3003.329526] Error detail: Timer facility experienced an error [ 3003.329527] HMER: 0840000000000000 [ 3003.329527] TFMR: 4a12000980a94000 [ 3006.359786] Severe Hypervisor Maintenance interrupt [Recovered] [ 3006.359792] Error detail: Timer facility experienced an error [ 3006.359795] HMER: 0840000000000000 [ 3006.359797] TFMR: 4a12000980a84000 Id Name State ---------------------------------------------------- 2 guest2 running 3 guest3 paused 4 guest4 running Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de>
-
Paul Mackerras authored
The B (segment size) field in the RB operand for the tlbie instruction is two bits, which we get from the top two bits of the first doubleword of the HPT entry to be invalidated. These bits go in bits 8 and 9 of the RB operand (bits 54 and 55 in IBM bit numbering). The compute_tlbie_rb() function gets these bits as v >> (62 - 8), which is not correct as it will bring in the top 10 bits, not just the top two. These extra bits could corrupt the AP, AVAL and L fields in the RB value. To fix this we shift right 62 bits and then shift left 8 bits, so we only get the two bits of the B field. The first doubleword of the HPT entry is under the control of the guest kernel. In fact, Linux guests will always put zeroes in bits 54 -- 61 (IBM bits 2 -- 9), but we should not rely on guests doing this. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Aneesh Kumar K.V authored
In kvm_test_clear_dirty(), if we find an invalid HPTE we move on to the next HPTE without unlocking the invalid one. In fact we should never find an invalid and unlocked HPTE in the rmap chain, but for robustness we should unlock it. This adds the missing unlock. Reported-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Alexander Graf authored
When injecting an IRQ, we only document which IRQ priority (which translates to IRQ type) gets injected. However, when reading traces you don't necessarily have all the numbers in your head to know which IRQ really is meant. This patch converts the IRQ number field to a symbolic name that is in sync with the respective define. That way it's a lot easier for readers to figure out what interrupt gets injected. Signed-off-by:
-
- 05 Dec, 2014 11 commits
-
-
Radim Krčmář authored
We reused host EBX and ECX, but KVM might not support all features; emulated XSAVE size should be smaller. EBX depends on unknown XCR0, so we default to ECX. SDM CPUID (EAX = 0DH, ECX = 0): EBX Bits 31-00: Maximum size (bytes, from the beginning of the XSAVE/XRSTOR save area) required by enabled features in XCR0. May be different than ECX if some features at the end of the XSAVE save area are not enabled. ECX Bit 31-00: Maximum size (bytes, from the beginning of the XSAVE/XRSTOR save area) of the XSAVE/XRSTOR save area required by all supported features in the processor, i.e all the valid bit fields in XCR0. Signed-off-by:Radim Krčmář <rkrcmar@redhat.com> Tested-by:
Wanpeng Li <wanpeng.li@linux.intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Wanpeng Li authored
Add nested virtualization support for xsaves. Signed-off-by:
-
Wanpeng Li authored
Add logic to get/set the XSS model-specific register. Signed-off-by:
-
Wanpeng Li authored
Initialize the XSS exit bitmap. It is zero so there should be no XSAVES or XRSTORS exits. Signed-off-by:
-
Paolo Bonzini authored
- EAX=0Dh, ECX=1: output registers EBX/ECX/EDX are reserved. - EAX=0Dh, ECX>1: output register ECX bit 0 is clear for all the CPUID leaves we support, because variable "supported" comes from XCR0 and not XSS. Bits above 0 are reserved, so ECX is overall zero. Output register EDX is reserved. Source: Intel Architecture Instruction Set Extensions Programming Reference, ref. number 319433-022 Reviewed-by:
-
Paolo Bonzini authored
This is the size of the XSAVES area. This starts providing guest support for XSAVES (with no support yet for supervisor states, i.e. XSS == 0 always in guests for now). Wanpeng Li suggested testing XSAVEC as well as XSAVES, since in practice no real processor exists that only has one of them, and there is no other way for userspace programs to compute the area of the XSAVEC save area. CPUID(EAX=0xd,ECX=1).EBX provides an upper bound. Suggested-by:
-
Wanpeng Li authored
Expose the XSAVES feature to the guest if the kvm_x86_ops say it is available. Signed-off-by:
-
Paolo Bonzini authored
For code that deals with cpuid, this makes things a bit more readable. Signed-off-by: -
Paolo Bonzini authored
Userspace is expecting non-compacted format for KVM_GET_XSAVE, but struct xsave_struct might be using the compacted format. Convert in order to preserve userspace ABI. Likewise, userspace is passing non-compacted format for KVM_SET_XSAVE but the kernel will pass it to XRSTORS, and we need to convert back. Fixes: f31a9f7c Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: stable@vger.kernel.org Cc: H. Peter Anvin <hpa@linux.intel.com> Tested-by:
Nadav Amit <namit@cs.technion.ac.il> Reviewed-by:
-
Paolo Bonzini authored
get_xsave_addr is the API to access XSAVE states, and KVM would like to use it. Export it. Cc: stable@vger.kernel.org Cc: x86@kernel.org Cc: H. Peter Anvin <hpa@linux.intel.com> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Paolo Bonzini authored
Merge tag 'kvm-s390-next-20141204' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fixups for kvm/next (3.19) Here we have two fixups of the latest interrupt rework and one architectural fixup.
-
- 04 Dec, 2014 18 commits
-
-
Jens Freimann authored
Instead of returning a possibly random or'ed together value, let's always return -EFAULT if rc is set. Signed-off-by:
Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
Jens Freimann authored
Currently we use a mixture of atomic/non-atomic bitops and the local_int spin lock to protect the pending_irqs bitmap and interrupt payload data. We need to use atomic bitops for the pending_irqs bitmap everywhere and in addition acquire the local_int lock where interrupt data needs to be protected. Signed-off-by:
-
David Hildenbrand authored
The cpu address of a source cpu (responsible for an external irq) is only to be stored if bit 6 of the ext irq code is set. If bit 6 is not set, it is to be zeroed out. The special external irq code used for virtio and pfault uses the cpu addr as a parameter field. As bit 6 is set, this implementation is correct. Reviewed-by:
Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by:
-
Christian Borntraeger authored
We currently track the pid of the task that runs the VCPU in vcpu_load. If a yield to that VCPU is triggered while the PID of the wrong thread is active, the wrong thread might receive a yield, but this will most likely not help the executing thread at all. Instead, if we only track the pid on the KVM_RUN ioctl, there are two possibilities: 1) the thread that did a non-KVM_RUN ioctl is holding a mutex that the VCPU thread is waiting for. In this case, the VCPU thread is not runnable, but we also do not do a wrong yield. 2) the thread that did a non-KVM_RUN ioctl is sleeping, or doing something that does not block the VCPU thread. In this case, the VCPU thread can receive the directed yield correctly. Signed-off-by:
-
David Hildenbrand authored
kvm_enter_guest() has to be called with preemption disabled and will set PF_VCPU. Current code takes PF_VCPU as a hint that the VCPU thread is running and therefore needs no yield. However, the check on PF_VCPU is wrong on s390, where preemption has to stay enabled in order to correctly process page faults. Thus, s390 reenables preemption and starts to execute the guest. The thread might be scheduled out between kvm_enter_guest() and kvm_exit_guest(), resulting in PF_VCPU being set but not being run. When this happens, the opportunity for directed yield is missed. However, this check is done already in kvm_vcpu_on_spin before calling kvm_vcpu_yield_loop: if (!ACCESS_ONCE(vcpu->preempted)) continue; so the check on PF_VCPU is superfluous in general, and this patch removes it. Signed-off-by: -
Igor Mammedov authored
Current linear search doesn't scale well when large amount of memslots is used and looked up slot is not in the beginning memslots array. Taking in account that memslots don't overlap, it's possible to switch sorting order of memslots array from 'npages' to 'base_gfn' and use binary search for memslot lookup by GFN. As result of switching to binary search lookup times are reduced with large amount of memslots. Following is a table of search_memslot() cycles during WS2008R2 guest boot. boot, boot + ~10 min mostly same of using it, slot lookup randomized lookup max average average cycles cycles cycles 13 slots : 1450 28 30 13 slots : 1400 30 40 binary search 117 slots : 13000 30 460 117 slots : 2000 35 180 binary search Signed-off-by:Igor Mammedov <imammedo@redhat.com> Signed-off-by:
-
Igor Mammedov authored
it will allow to use binary search for GFN -> memslot lookups, reducing lookup cost with large slots amount. Signed-off-by:
-
Igor Mammedov authored
In typical guest boot workload only 2-3 memslots are used extensively, and at that it's mostly the same memslot lookup operation. Adding LRU cache improves average lookup time from 46 to 28 cycles (~40%) for this workload. Signed-off-by:
-
Igor Mammedov authored
UP/DOWN shift loops will shift array in needed direction and stop at place where new slot should be placed regardless of old slot size. Signed-off-by:
-
Igor Mammedov authored
if number of pages haven't changed sorting algorithm will do nothing, so there is no need to do extra check to avoid entering sorting logic. Signed-off-by:
-
Radim Krčmář authored
While fixing an x2apic bug, 17d68b76 KVM: x86: fix guest-initiated crash with x2apic (CVE-2013-6376) we've made only one cluster available. This means that the amount of logically addressible x2APICs was reduced to 16 and VCPUs kept overwriting themselves in that region, so even the first cluster wasn't set up correctly. This patch extends x2APIC support back to the logical_map's limit, and keeps the CVE fixed as messages for non-present APICs are dropped. Signed-off-by:
-
Radim Krčmář authored
They can't be violated now, but play it safe for the future. Signed-off-by:
-
Radim Krčmář authored
x2apic allows destinations > 0xff and we don't want them delivered to lower APICs. They are correctly handled by doing nothing. Signed-off-by:
-
Radim Krčmář authored
Physical mode can't address more than one APIC, but lowest-prio is allowed, so we just reuse our paths. SDM 10.6.2.1 Physical Destination: Also, for any non-broadcast IPI or I/O subsystem initiated interrupt with lowest priority delivery mode, software must ensure that APICs defined in the interrupt address are present and enabled to receive interrupts. We could warn on top of that. Signed-off-by:
-
Radim Krčmář authored
False from kvm_irq_delivery_to_apic_fast() means that we don't handle it in the fast path, but we still return false in cases that were perfectly handled, fix that. Signed-off-by:
-
Radim Krčmář authored
0x830 MSR is 0x300 xAPIC MMIO, which is MSR_ICR. Signed-off-by: Radim KrÄmáÅ
™ <rkrcmar@redhat.com> Signed-off-by: -
Nadav Amit authored
x2APIC has no registers for DFR and ICR2 (see Intel SDM 10.12.1.2 "x2APIC Register Address Space"). KVM needs to cause #GP on such accesses. Fix it (DFR and ICR2 on read, ICR2 on write, DFR already handled on writes). Signed-off-by:
-
Nadav Amit authored
Certain x86 instructions that use modrm operands only allow memory operand (i.e., mod012), and cause a #UD exception otherwise. KVM ignores this fact. Currently, the instructions that are such and are emulated by KVM are MOVBE, MOVNTPS, MOVNTPD and MOVNTI. MOVBE is the most blunt example, since it may be emulated by the host regardless of MMIO. The fix introduces a new group for handling such instructions, marking mod3 as illegal instruction. Signed-off-by:
-
- 03 Dec, 2014 1 commit
-
-
Paolo Bonzini authored
Merge tag 'kvm-s390-next-20141128' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Several fixes,cleanups and reworks Here is a bunch of fixes that deal mostly with architectural compliance: - interrupt priorities - interrupt handling - intruction exit handling We also provide a helper function for getting the guest visible storage key.
-
- 28 Nov, 2014 6 commits
-
-
Jens Freimann authored
Allow to specify CR14, logout area, external damage code and failed storage address. Since more then one machine check can be indicated to the guest at a time we need to combine all indication bits with already pending requests. Signed-off-by:
-
Jens Freimann authored
This patch adapts handling of local interrupts to be more compliant with the z/Architecture Principles of Operation and introduces a data structure which allows more efficient handling of interrupts. * get rid of li->active flag, use bitmap instead * Keep interrupts in a bitmap instead of a list * Deliver interrupts in the order of their priority as defined in the PoP * Use a second bitmap for sigp emergency requests, as a CPU can have one request pending from every other CPU in the system. Signed-off-by:
-
Jens Freimann authored
Adds a bitmap to the vcpu structure which is used to keep track of local pending interrupts. Also add enum with all interrupt types sorted in order of priority (highest to lowest) Signed-off-by:
-
Jens Freimann authored
Move delivery code for cpu-local interrupt from the huge do_deliver_interrupt() to smaller functions which handle one type of interrupt. Signed-off-by:
-
Jens Freimann authored
Get rid of open coded value for virtio and pfault completion interrupts. Signed-off-by:
-
David Hildenbrand authored
The 32bit external interrupt parameter is only valid for timing-alert and service-signal interrupts. Signed-off-by:
-
