- 01 May, 2016 2 commits
-
-
Jon Paul Maloy authored
When we are displaying statistics for the first link established between two peers, it will always be presented as STANDBY although it in reality is ACTIVE. This happens because we forget to set the 'active' flag in the link instance at the moment it is established. Although this is a bug, it only has impact on the presentation view of the link, not on its actual functionality. Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Add a check whether the 'struct device_node' pointer passed to of_mdiobus_register() is an available (aka enabled) node in the Device Tree. Rationale for doing this are cases where an Ethernet MAC provides a MDIO bus controller and node, and an additional Ethernet MAC might be connecting its PHY/switches to that first MDIO bus controller, while still embedding one internally which is therefore marked as "disabled". Instead of sprinkling checks like these in callers of of_mdiobus_register(), do this in a central location. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
- 29 Apr, 2016 36 commits
-
-
David S. Miller authored
Saeed Mahameed says: ==================== Mellanox 100G mlx5 ethernet aRFS support This series adds accelerated RFS support for the mlx5e driver. I have added one patch non-related to aRFS that fixes the rtnl_lock warning mlx5 driver been getting since b7aade15 ('vxlan: break dependency with netdev drivers') aRFS support in details: A direct TIR per RQ is now required in order to have the essential building blocks for aRFS. Today the driver has one direct TIR that forwards traffic to RQ[0] (core 0), and one indirect TIR for RSS indirection table. For that we've added one direct TIR per RQ, e.g.: TIR[i] -> RQ[i] (core i). Publicize Modify flow rule destination and reveal it in flow steering API, to have the ability to dynamically modify the destination TIR(core) for aRFS rules from the ethernet driver. Initializing CPU reverse mapping to notify upper layer on internal receive queue cpu mappings. Some design refactoring for mlx5e ethernet driver flow tables and flow steering API. Now the caller of create_flow_table can choose the level of the flow table, this way we will create the mlx5e flow tables in a reversed order and connect them as we go, we create flow table[i+1] before flow table[i] to be able to set flow table[i + 1] as a destination of flow table[i] once flow table[i] is created. also we have split the main flow table in the following manner: - From before: RX packet had to visit two flow tables until it is delivered to its receive queue: RX packet -> vlan filter flow table -> main flow table. > vlan filter will check the packet vlan field is allowed. > main flow will check if the dest mac is allowed and will check the l3/l4 headers to retrieve the RSS hash for steering the packet into its final receive queue. - Now main flow table is split into l2 dst mac steering table and ttc (traffic type classifier) table: RX packet -> vlan filter -> l2 table -> ttc table > vlan filter - same as before > L2 filter - filter packets according their destination mac address > ttc table - classify packet headers for RSS steering - L3/L4 classification rules to steer the packet according to thier headers hash - in case of none of the rules applies the packet is steered to RQ[0] After the above refactoring all left to-do is to create aRFS flow table which will manage aRFS steering rules to forward traffic to the desired RQ (core) and just connect the ttc table rules destinations to aRFS flow table. aRFS flow table in case of a miss will deliver the traffic to the core where the original ttc hash would have chosen. TTC table is not initialized and enabled until the user explicitly asks to, i.e. setting the NETIF_F_NTUPLE to ON. This way there is no need for ttc table to forward traffic to aRFS table unless required. When setting back to OFF aRFS flow table is disabled and disconnected. ==================== Signed-off-by:
-
Maor Gottlieb authored
Accelerated RFS requires that ntuple filtering is enabled via ethtool and driver supports ndo_rx_flow_steer. When the ntuple filtering is enabled, we modify the l3_l4 ttc rules to point on the aRFS flow tables and when the filtering is disabled, we modify the l3_l4 ttc rules to point on the RSS TIRs. Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Maor Gottlieb authored
Implement ndo_rx_flow_steer ndo. A new flow steering rule will be composed from the skb 4-tuple and added to the hardware aRFS flow table. Each rule is stored in an internal hash table, if such skb 4-tuple rule already exists we update the corresponding hardware steering rule with the new destination. For garbage collection rps_may_expire_flow will be invoked for a limited amount of old rules upon any ndo_rx_flow_steer invocation. Signed-off-by:
-
Maor Gottlieb authored
Create the following four flow tables for aRFS usage: 1. IPv4 TCP - filtering 4-tuple of IPv4 TCP packets. 2. IPv6 TCP - filtering 4-tuple of IPv6 TCP packets. 3. IPv4 UDP - filtering 4-tuple of IPv4 UDP packets. 4. IPv6 UDP - filtering 4-tuple of IPv6 UDP packets. Each flow table has two flow groups: one for the 4-tuple filtering (full match) and the other contains * rule for miss rule. Full match rule means a hit for aRFS and packet will be forwarded to the dedicated RQ/Core, miss rule packets will be forwarded to default RSS hashing. Signed-off-by:
-
Maor Gottlieb authored
Allocating CPU rmap and add entry for each IRQ. CPU rmap is used in aRFS to get the RX queue number of the RX completion interrupts. Signed-off-by:
-
Maor Gottlieb authored
Currently, the main flow table is used for two purposes: One is to do mac filtering and the other is to classify the packet l3-l4 header in order to steer the packet to the right RSS TIR. This design is very complex, for each configured mac address we have to add eleven rules (rule for each traffic type), the same if the device is put to promiscuous/allmulti mode. This scheme isn't scalable for future features like aRFS. In order to simplify it, the main flow table is split to two flow tables: 1. l2 table - filter the packet dmac address, if there is a match we forward to the ttc flow table. 2. TTC (Traffic Type Classifier) table - classify the traffic type of the packet and steer the packet to the right TIR. In this new design, when new mac address is added, the driver adds only one flow rule instead of eleven. Signed-off-by:
-
Maor Gottlieb authored
Slightly refactor and re-order the flow steering structs, tables and data-bases for better self-containment and flexibility to add more future steering phases (tables/rules/data bases) e.g: aRFS. Changes: 1. Move the vlan DB and address DB into their table structs. 2. Rename steering table structs to unique format: mlx5e_*_table, e.g: mlx5e_vlan_table. Signed-off-by:
-
Maor Gottlieb authored
Currently, namespace could be initialized only with priorities with the same attributes. Add support to initialize namespace with priorities with different attributes(e.g. different number of levels). Signed-off-by:
-
Maor Gottlieb authored
Currently, consumers of the flow steering infrastructure can't choose their own flow table levels and are limited to one flow table per level. This just waste levels. Instead, we introduce here the possibility to use multiple flow tables in a level. The user is free to connect these flow tables, while following the rule (FTEs in FT of level x could only point to FTs of level y where y > x). In addition this patch switch the order of the create/destroy flow tables of the NIC(vlan and main). Signed-off-by:
-
Maor Gottlieb authored
Refactors the flow steering namespace creation, by changing the name num_fts to num_levels. When new flow table is created, the driver assign new level to this flow table therefore the meaning is equivalent. Since downstream patches will introduce the ability to create more than one flow table per level, the name num_fts is no longer accurate. Signed-off-by:
-
Maor Gottlieb authored
This API is used for modifying the flow rule destination. This is needed for modifying the pointed flow table by the traffic type classifier rules to point on the aRFS tables. Signed-off-by:
-
Tariq Toukan authored
Introduce new TIRs for direct access per RQ. Now we have 2 available kinds of TIRs: - indirect TIR per traffic type, each points to one RQT (RSS RQT) same as before. - New direct TIR per RQ, each points to RQT with a size of one that forwards packets to that RQ only. Driver will open max channels (num cores) direct TIRs by default, they will be filled with the actual RQs once channels are allocated. Needed for downstream aRFS and ethtool direct steering functionalities. Signed-off-by:Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Matthew Finlay authored
Hold the rtnl lock when calling vxlan_get_rx_port(). Fixes: b7aade15 ("vxlan: break dependency with netdev drivers") Signed-off-by:
Matthew Finlay <matt@mellanox.com> Reported-by:
Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by:
-
David S. Miller authored
Michael Heimpold says: ==================== net: ethernet: enc28j60: small improvements This series of two patches adds the following improvements to the driver: 1) Rework the central SPI read function so that it is compatible with SPI masters which only support half duplex transfers. 2) Add a device tree binding for the driver. Changelog: v3: * renamed and improved binding documentation as suggested by Rob Herring v2: * took care of Arnd Bergmann's review comments - allow to specify MAC address via DT - unconditionally define DT id table * increased the driver version minor number * driver author's email address bounces, removed from address list v1: * Initial submission ==================== Signed-off-by: -
Michael Heimpold authored
The following patch adds the required match table for device tree support (and while at, fix the indent). It's also possible to specify the MAC address in the DT blob. Also add the corresponding binding documentation file. Signed-off-by:
Michael Heimpold <mhei@heimpold.de> Signed-off-by:
-
Michael Heimpold authored
The current spi_read_buf function fails on SPI host masters which are only half-duplex capable. Splitting the Tx and Rx part solves this issue. Tested on Raspberry Pi (full duplex) and I2SE Duckbill (half duplex). Signed-off-by:
-
Nikolay Aleksandrov authored
is_skb_forwardable is not supposed to change anything so constify its arguments Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
David S. Miller authored
Guillaume Nault says: ==================== ppp: add rtnetlink support PPP devices lack the ability to be customised at creation time. In particular they can't be created in a given netns or with a particular name. Moving or renaming the device after creation is possible, but creates undesirable transient effects on servers where PPP devices are constantly created and removed, as users connect and disconnect. Implementing rtnetlink support solves this problem. The rtnetlink handlers implemented in this series are minimal, and can only replace the PPPIOCNEWUNIT ioctl. The rest of PPP ioctls remains necessary for any other operation on channels and units. It is perfectly possible to mix PPP devices created by rtnl and by ioctl(PPPIOCNEWUNIT). Devices will behave in the same way. mutex_trylock() is used to resolve the locking issue wrt. locking dependency between rtnl_lock() and ppp_mutex (see ppp_nl_newlink() in patch #2). A user visible difference brought by this series is that old PPP interfaces (those created with ioctl(PPPIOCNEWUNIT)), can now be removed by "ip link del", just like new rtnl based PPP devices. Changes since v3: - Rebase on net-next. - Not an RFC anymore. Changes since v2: - Define ->rtnl_link_ops for ioctl based PPP devices, so they can handle rtnl messages just like rtnl based ones (suggested by Stephen Hemminger). - Move back to original lock ordering between ppp_mutex and rtnl_lock to simplify patch series. Handle lock inversion issue using mutex_trylock() (suggested by Stephen Hemminger). - Do file descriptor lookup directly in ppp_nl_newlink(), to simplify ppp_dev_configure(). Changes since v1: - Rebase on net-next. - Invert locking order wrt. ppp_mutex and rtnl_lock and protect file->private_data with ppp_mutex. ==================== Signed-off-by: -
Guillaume Nault authored
Define PPP device handler for use with rtnetlink. The only PPP specific attribute is IFLA_PPP_DEV_FD. It is mandatory and contains the file descriptor of the associated /dev/ppp instance (the file descriptor which would have been used for ioctl(PPPIOCNEWUNIT) in the ioctl-based API). The PPP device is removed when this file descriptor is released (same behaviour as with ioctl based PPP devices). PPP devices created with the rtnetlink API behave like the ones created with ioctl(PPPIOCNEWUNIT). In particular existing ioctls work the same way, no matter how the PPP device was created. The rtnl callbacks are also assigned to ioctl based PPP devices. This way, rtnl messages have the same effect on any PPP devices. The immediate effect is that all PPP devices, even ioctl-based ones, can now be removed with "ip link del". A minor difference still exists between ioctl and rtnl based PPP interfaces: in the device name, the number following the "ppp" prefix corresponds to the PPP unit number for ioctl based devices, while it is just an unrelated incrementing index for rtnl ones. Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Guillaume Nault authored
Move PPP device initialisation and registration out of ppp_create_interface(). This prepares code for device registration with rtnetlink. While there, simplify the prototype of ppp_create_interface(): * Since ppp_dev_configure() takes care of setting file->private_data, there's no need to return a ppp structure to ppp_unattached_ioctl() anymore. * The unit parameter is made read/write so that ppp_create_interface() can tell which unit number has been assigned. Signed-off-by: -
Alexandre TORGUE authored
On new GMAC4 IP, MAC_MDIO_address register has been updated, and bitmaps changed. This patch takes into account those changes. Signed-off-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
-
Jiri Benc authored
Commit 0c867c9b ("vxlan: move Ethernet initialization to a separate function") changed initialization order and as an unintended result, when the user specifies additional link parameters (such as IFLA_ADDRESS) while creating vxlan interface, those are overwritten by vxlan_ether_setup later. It's necessary to call ether_setup from withing the ->setup callback. That way, the correct parameters are set by rtnl_create_link later. This is done also for VXLAN-GPE, as we don't know the interface type yet at that point, and changed to the correct interface type later. Fixes: 0c867c9b ("vxlan: move Ethernet initialization to a separate function") Reported-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
Jiri Benc <jbenc@redhat.com> Tested-by:
-
David S. Miller authored
Jesper Dangaard Brouer says: ==================== samples/bpf: Improve user experience It is a steep learning curve getting started with using the eBPF examples in samples/bpf/. There are several dependencies, and specific versions of these dependencies. Invoking make in the correct manor is also slightly obscure. This patchset cleanup, document and hopefully improves the first time user experience with the eBPF samples directory by auto-detecting certain scenarios. V4: - Address Naveen's nitpicks - Handle/fail if extra args are passed in LLC or CLANG (David Laight) V3: - Add Alexei's ACKs - Remove README paragraph about LLVM experimental BPF target as it only existed between LLVM version 3.6 to 3.7. V2: - Adjusted recommend minimum versions to 3.7.1 - Included clang build instructions - New patch adding CLANG variable and validation of command ==================== Signed-off-by: -
Jesper Dangaard Brouer authored
Users are likely to manually compile both LLVM 'llc' and 'clang' tools. Thus, also allow redefining CLANG and verify command exist. Makefile implementation wise, the target that verify the command have been generalized. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Jesper Dangaard Brouer authored
It is not intuitive that 'make' must be run from the top level directory with argument "samples/bpf/" to compile these eBPF samples. Introduce a kbuild make file trick that allow make to be run from the "samples/bpf/" directory itself. It basically change to the top level directory and call "make samples/bpf/" with the "/" slash after the directory name. Also add a clean target that only cleans this directory, by taking advantage of the kbuild external module setting M=$PWD. Signed-off-by:
-
Jesper Dangaard Brouer authored
Getting started with using examples in samples/bpf/ is not straightforward. There are several dependencies, and specific versions of these dependencies. Just compiling the example tool is also slightly obscure, e.g. one need to call make like: make samples/bpf/ Do notice the "/" slash after the directory name. Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by:
-
Jesper Dangaard Brouer authored
Make compiling samples/bpf more user friendly, by detecting if LLVM compiler tool 'llc' is available, and also detect if the 'bpf' target is available in this version of LLVM. Signed-off-by:
-
Jesper Dangaard Brouer authored
It is practical to be-able-to redefine the location of the LLVM command 'llc', because not all distros have a LLVM version with bpf target support. Thus, it is sometimes required to compile LLVM from source, and sometimes it is not desired to overwrite the distros default LLVM version. This feature was removed with 128d1514 ("samples/bpf: Use llc in PATH, rather than a hardcoded value"). Add this features back. Note that it is possible to redefine the LLC on the make command like: make samples/bpf/ LLC=~/git/llvm/build/bin/llc Fixes: 128d1514 ("samples/bpf: Use llc in PATH, rather than a hardcoded value") Signed-off-by:
-
David S. Miller authored
Hariprasad Shenai says: ==================== cxgb4/cxgb4vf: add support for mbox cmd logging This patch series adds support for logging mailbox commands and replies for debugging purpose for both PF and VF driver. This patch series has been created against net-next tree and includes patches on cxgb4 and cxgb4vf driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: -
Hariprasad Shenai authored
Add new /sys/kernel/debug/ support to dump firmware mailbox commands and replies for debugging purpose. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
Add new /sys/kernel/debug/ support to dump a firmware mailbox command issued and replies for debugging purpose. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by:
-
David S. Miller authored
Yisen Zhuang says: ==================== net: hns: update DT properties according to Rob's comments There are some inappropriate properties definition in hns DT. We update the definition according to Rob's review comments and fix some typos in binding. For more details, please see individual patches. ==================== Signed-off-by: -
Yisen.Zhuang\(Zhuangyuzeng\) authored
Indexes should generally be avoided. This patch changes property port-id to reg in dsaf port node. Signed-off-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
-
Yisen.Zhuang\(Zhuangyuzeng\) authored
This patch changes property port-id to reg in dsaf port node, removes property cpld-ctrl-reg, and fixes some typos. Signed-off-by:
-
Yisen.Zhuang\(Zhuangyuzeng\) authored
Indexes should generally be avoided. So we use reg rather than port-id to index ports. Signed-off-by:
-
Yisen.Zhuang\(Zhuangyuzeng\) authored
Because cpld-ctrl-reg property is offset base on cpld-syscon property, we make it as a cell in the cpld-syscon property. Signed-off-by:
-
- 28 Apr, 2016 2 commits
-
-
Mahesh Bandewar authored
When newlink creation fails at device-registration, the port->count is decremented twice. Francesco Ruggeri (fruggeri@arista.com) found this issue in Macvlan and the same exists in IPvlan driver too. While fixing this issue I noticed another issue of missing unregister in case of failure, so adding it to the fix which is similar to the macvlan fix by Francesco in commit 30837960 ("macvlan: fix failure during registration v3") Reported-by:
Francesco Ruggeri <fruggeri@arista.com> Signed-off-by:
Mahesh Bandewar <maheshb@google.com> CC: Eric Dumazet <edumazet@google.com> CC: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
françois romieu authored
pch_gbe_tx_ring.tx_lock is only used in the hard_xmit handler and in the transmit completion reaper called from NAPI context. Compile-tested only. Potential victims Cced. Someone more knowledgeable may check if pch_gbe_tx_queue could have some use for a mmiowb. Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Andy Cress <andy.cress@us.kontron.com> Cc: bryan@fossetcon.org Signed-off-by:
-
