- 05 Nov, 2012 15 commits
-
-
Jiri Olsa authored
Adding test to validate perf_event_attr data for command: 'stat -e cycles' Reported-by:
Namhyung Kim <namhyung.kim@lge.com> Signed-off-by:
Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1352130579-13451-2-git-send-email-jolsa@redhat.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Namhyung Kim authored
David reported that current perf report refused to run on a data file captured from a different machine because of objdump. Since the objdump tools won't be used unless annotation was requested, checking its presence at init time doesn't make sense. Reported-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Reviewed-by:
-
Namhyung Kim authored
Currently various hist browser functions receive 3 arguments for refreshing histogram but only used from a few places. Also it's only for perf top command so that it can be NULL for other (and probably most) cases. Pack them into a struct in order to reduce number of those unused arguments. This is a mechanical change and does not intend a functional change. Signed-off-by:
-
Namhyung Kim authored
David reported that perf report for i686 target data on x86_64 host failed to work because it tried to find out cross-compiled objdump. However objdump for x86_64 is compatible to i686 so that it doesn't need to do it at all. To prevent similar artifacts, normalize arch name when comparing host and file architectures. Reported-by:
-
Jiri Olsa authored
Adding documentation for attr tests. Signed-off-by:
-
Jiri Olsa authored
Adding test to validate perf_event_attr data for commands: 'stat -d' 'stat -dd' 'stat -ddd' Signed-off-by:
-
Jiri Olsa authored
Adding test to validate perf_event_attr data for command: 'stat' Signed-off-by:
-
Jiri Olsa authored
Adding test to validate perf_event_attr data for command: 'stat -e {cycles,instructions}' Signed-off-by: -
Jiri Olsa authored
Adding test to validate perf_event_attr data for command: 'stat --group -e cycles,instructions' Signed-off-by:
-
Jiri Olsa authored
Adding test to validate perf_event_attr data for command: 'stat -i' Signed-off-by:
-
Jiri Olsa authored
Adding test to validate perf_event_attr data for command: 'record -j any' 'record -j any_call' 'record -j any_ret' 'record -j hv' 'record -j ind_call' 'record -j k' 'record -j u' Signed-off-by:
-
Jiri Olsa authored
Adding test to validate perf_event_attr data for command: 'record -b' Signed-off-by:
-
Jiri Olsa authored
Adding test to validate perf_event_attr data for command: 'record -D' Signed-off-by:
-
Jiri Olsa authored
Adding test to validate perf_event_attr data for command: 'record -R' Signed-off-by:
-
Jiri Olsa authored
Adding test to validate perf_event_attr data for command: 'record -d' Signed-off-by:
-
- 01 Nov, 2012 10 commits
-
-
Jiri Olsa authored
Adding test to validate perf_event_attr data for command: 'record -i' Signed-off-by:
-
Jiri Olsa authored
Adding test to validate perf_event_attr data for command: 'record -n' Signed-off-by:
-
Jiri Olsa authored
Adding test to validate perf_event_attr data for command: 'record -c 100 -P' Signed-off-by:
-
Jiri Olsa authored
Adding tests to validate perf_event_attr data for commands: 'record -g --' 'record -g fp 'record -g dwarf Signed-off-by:
-
Jiri Olsa authored
Adding test to validate perf_event_attr data for command: 'record -c 123' Signed-off-by:
-
Jiri Olsa authored
Adding test to validate perf_event_attr data for command: 'record -F 100' Signed-off-by:
-
Jiri Olsa authored
Adding test to validate perf_event_attr data for command: 'record group -e {cycles,instructions}' Signed-off-by: -
Jiri Olsa authored
Adding test to validate perf_event_attr data for command: 'record --group -e cycles,instructions' Signed-off-by:
-
Jiri Olsa authored
The test attr suite is run only if it's run under perf source directory, or tests are found in installed path. Otherwise tests are omitted (notification is displayed) and finished as successful. Signed-off-by:
-
Jiri Olsa authored
Adding test to validate perf_event_attr data for command: 'record' Signed-off-by:
-
- 31 Oct, 2012 10 commits
-
-
Jiri Olsa authored
The idea is run perf session with kidnapping sys_perf_event_open function. For each sys_perf_event_open call we store the perf_event_attr data to the file to be checked later against what we expect. You can run this by: $ python ./tests/attr.py -d ./tests/attr/ -p ./perf -v v2 changes: - preserve errno value in the hook Signed-off-by:
-
Jiri Olsa authored
Separating test objects into 'tests' directory. Signed-off-by:
-
Feng Tang authored
As 'perf top' has no data files to run scripts against. Also add a is_report_browser() helper function to judge whether the running browser is for 'perf report'. Signed-off-by:
Feng Tang <feng.tang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1351699257-5102-1-git-send-email-feng.tang@intel.comSigned-off-by:
-
Jiri Olsa authored
It's not needed. Signed-off-by:
-
Andi Kleen authored
So that the browser still shows the abort label. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1351643663-23828-18-git-send-email-andi@firstfloor.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
If git is installed we'll have a 'perf --version' output of this form: $ make -j8 -C tools/perf/ O=/home/acme/git/build/perf install $ perf --version perf version 3.7.rc3.g3afad6 Now on a machine without git installed: $ mv /home/acme/bin/git /home/acme/bin/git.OFF $ make -j8 -C tools/perf/ O=/home/acme/git/build/perf install $ perf --version perf version 3.7.0-rc2 That is, no error message due to git not being installed will appear on the screen and instead the version string in the top level Makefile will be used. Requested-by:
Ingo Molnar <mingo@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-am6yp6phvxyjmyndxogpunjv@git.kernel.orgSigned-off-by:
-
Ingo Molnar authored
There's another source of overhead in the perf version string generator: git update-index -q --refresh ... which will iterate the whole checked out tree. This can be pretty slow on NFS volumes, but takes some time even with local SSD disks and a fully cached kernel tree: $ perf stat --null --repeat 3 --pre "rm -f PERF-VERSION-FILE" util/PERF-VERSION-GEN PERF_VERSION = 3.7.rc3.g5399b3b.dirty PERF_VERSION = 3.7.rc3.g5399b3b.dirty PERF_VERSION = 3.7.rc3.g5399b3b.dirty Performance counter stats for 'util/PERF-VERSION-GEN' (3 runs): 0.306999221 seconds time elapsed ( +- 0.56% ) So remove the .dirty differentiator as well - it adds little information because locally patched git trees are common, but seldom are the perf tools modified. So a lot of version strings are reported as 'dirty' while in fact they are pristine perf builds. For example 99% of my perf builds are not patched but the kernel tree is slightly patched, which adds the .dirty tag. Eliminating that tag speeds up version generation by another order of magnitude: $ perf stat --null --repeat 3 --sync --pre "rm -f PERF-VERSION-FILE" util/PERF-VERSION-GEN PERF_VERSION = 3.7.rc3.g4b0bd3 PERF_VERSION = 3.7.rc3.g4b0bd3 PERF_VERSION = 3.7.rc3.g4b0bd3 Performance counter stats for 'util/PERF-VERSION-GEN' (3 runs): 0.021270923 seconds time elapsed ( +- 1.94% ) (Also clean up some of the comments around this code.) Signed-off-by: -
Ingo Molnar authored
Building perf is pretty slow on trees that have a lot of commits relative to the nearest Git tag. This slowness manifests itself during version string generation: $ perf stat --null --repeat 3 --sync --pre "rm -f PERF-VERSION-FILE" util/PERF-VERSION-GEN PERF_VERSION = 3.7.rc3.1458.g5399b3b PERF_VERSION = 3.7.rc3.1458.g5399b3b PERF_VERSION = 3.7.rc3.1458.g5399b3b Performance counter stats for 'util/PERF-VERSION-GEN' (3 runs): 2.857503976 seconds time elapsed ( +- 0.22% ) The build can be even slower than that, when one over NFS volumes. The reason for the slowness is that util/PERF-VERSION-GEN uses "git describe" to generate the string, which has to count the "number of commits distance" from the nearest tag - the ".1458." count in the output above. For that Git had to extract and decompress 1458 Git objects, which takes time and bandwidth. But this "number of commits" value is mostly irrelevant in practice. We either want to know an approximate tag name, or we want to know the precise sha1. So this patch simplifies the version string to: PERF_VERSION = 3.7.rc3.g5399b3b.dirty which speeds up the version string generation script by an order of magnitude: $ perf stat --null --repeat 3 --sync --pre "rm -f PERF-VERSION-FILE" util/PERF-VERSION-GEN PERF_VERSION = 3.7.rc3.g5399b3b.dirty PERF_VERSION = 3.7.rc3.g5399b3b.dirty PERF_VERSION = 3.7.rc3.g5399b3b.dirty Performance counter stats for 'util/PERF-VERSION-GEN' (3 runs): 0.307633559 seconds time elapsed ( +- 0.84% ) Signed-off-by: -
Joonsoo Kim authored
Without defining ARCH=arm, building perf for Android ARM will fail, because it needs architecture specific files. So add related relevant information to the android documentation. Signed-off-by:
Joonsoo Kim <js1304@gmail.com> Reviewed-by:
-
Namhyung Kim authored
When perf detects no libelf during the build, it'll use internal mini elf parser instead of libelf. But as it only supports minimal functionalities, it also disables support to 'probe' builtin command. Currently it didn't warned to user. Fix it. $ sudo apt-get remove libelf-dev $ make CHK -fstack-protector-all CHK -Wstack-protector CHK -Wvolatile-register-var CHK bionic CHK libelf CHK glibc Makefile:491: No libelf found, disables 'probe' tool, please install elfutils-libelf-devel/libelf-dev CHK libunwind CHK libaudit $ make NO_LIBELF=1 CHK -fstack-protector-all CHK -Wstack-protector CHK -Wvolatile-register-var CHK bionic CHK libaudit Reported-by:Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
- 30 Oct, 2012 2 commits
-
-
Peter Huewe authored
FYI, there are new sparse warnings: arch/x86/kernel/cpu/perf_event.c:1356:18: sparse: symbol 'events_attr' was not declared. Should it be static? This patch makes it static and also adds the static keyword to fix arch/x86/kernel/cpu/perf_event.c:1344:9: warning: symbol 'events_sysfs_show' was not declared. Signed-off-by:
Peter Huewe <peterhuewe@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com> Cc: fengguang.wu@intel.com Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/n/tip-lerdpXlnruh0yvWs2owwuizl@git.kernel.orgSigned-off-by:
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements, fixes and code move from Arnaldo Carvalho de Melo: * Initialize 'page_size' variable in the python binding, this was sent for perf/urgent by mistake, then when merging Ingo removed it, fixing the problem for perf/urgent, but when perf/urgent was merged with perf/core, where that initialization is needed, made the python binding mmap call to fail, fix it by initializing page_size again. * Add a browser for 'perf script' and make it available from the report and annotate browsers. It does filtering to find the scripts that handle events found in the perf.data file used. From Feng Tang * Move some functions from symbol.c to more appropriate files, creating dso.[ch] in the process, no code changes. From Jiri Olsa * Fix mmap error output message for when perf_mmap fails and returns !-EPERM, where the default for mmap_pages, INT_MAX, was causing a !power of 2 error message, fix from Jiri Olsa. Signed-off-by:
-
- 29 Oct, 2012 3 commits
-
-
Arnaldo Carvalho de Melo authored
The commit 0c1fe6b: 'perf tools: Have the page size value available for all tools' Broke the python binding because the global variable 'page_size' is initialized on the main() routine, that is not called when using just the python binding, causing evlist.mmap() to fail because it expects that variable to be initialized to the system's page size. Fix it by initializing it on the binding init routine. Reported-by:
-
Jiri Olsa authored
The mmap_pages default value is not power of 2 (UINT_MAX). Together with perf_evlist__mmap function returning error value different from EPERM, we get misleading error message: "--mmap_pages/-m value must be a power of two." Fixing this by adding extra check for UINT_MAX value for this error condition. Signed-off-by:
-
Feng Tang authored
With this function, other modules can basically check whether a file is a legal perf data file by checking its first 8 bytes against all possible perf magic numbers. Change the function name from check_perf_magic to more meaningful is_perf_magic as suggested by acme. Signed-off-by:
-
