iput() shouldn't be called for inodes in I_NEW state.
We need to mark inode as constructed first.

WARNING: at fs/inode.c:1309 iput+0x20b/0x210()
Call Trace:
 [<ffffffff8103e7ba>] warn_slowpath_common+0x7a/0xb0
 [<ffffffff8103e805>] warn_slowpath_null+0x15/0x20
 [<ffffffff810eaf0b>] iput+0x20b/0x210
 [<ffffffff811b96fb>] btrfs_iget+0x1eb/0x4a0
 [<ffffffff811c3ad6>] btrfs_run_defrag_inodes+0x136/0x210
 [<ffffffff811ad55f>] cleaner_kthread+0x17f/0x1a0
 [<ffffffff81035b7d>] ? sub_preempt_count+0x9d/0xd0
 [<ffffffff811ad3e0>] ? transaction_kthread+0x280/0x280
 [<ffffffff8105af86>] kthread+0x96/0xa0
 [<ffffffff814336d4>] kernel_thread_helper+0x4/0x10
 [<ffffffff8105aef0>] ? kthread_worker_fn+0x190/0x190
 [<ffffffff814336d0>] ? gs_change+0xb/0xb
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
CC: Konstantin Khlebnikov <khlebnikov@openvz.org>
Tested-by: David Sterba <dsterba@suse.cz>
CC: Josef Bacik <josef@redhat.com>
CC: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

We can reproduce this oops via the following steps:

$ mkfs.btrfs /dev/sdb7
$ mount /dev/sdb7 /mnt/btrfs
$ for ((i=0; i<3; i++)); do btrfs sub snap /mnt/btrfs /mnt/btrfs/s_$i; done
$ rm -fr /mnt/btrfs/*
$ rm -fr /mnt/btrfs/*

then we'll get
------------[ cut here ]------------
kernel BUG at fs/btrfs/inode.c:2264!
[...]
Call Trace:
 [<ffffffffa05578c7>] btrfs_rmdir+0xf7/0x1b0 [btrfs]
 [<ffffffff81150b95>] vfs_rmdir+0xa5/0xf0
 [<ffffffff81153cc3>] do_rmdir+0x123/0x140
 [<ffffffff81145ac7>] ? fput+0x197/0x260
 [<ffffffff810aecff>] ? audit_syscall_entry+0x1bf/0x1f0
 [<ffffffff81153d0d>] sys_unlinkat+0x2d/0x40
 [<ffffffff8147896b>] system_call_fastpath+0x16/0x1b
RIP  [<ffffffffa054f7b9>] btrfs_orphan_add+0x179/0x1a0 [btrfs]

When it comes to btrfs_lookup_dentry, we may set a snapshot's inode->i_ino
to BTRFS_EMPTY_SUBVOL_DIR_OBJECTID instead of BTRFS_FIRST_FREE_OBJECTID,
while the snapshot's location.objectid remains unchanged.

However, btrfs_ino() does not take this into account, and returns a wrong ino,
and causes the oops.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

xfstests exposed a problem with preallocate when it fallocates a range that
already has an extent.  We don't set the new i_size properly because we see that
we already have an extent.  This isn't right and we should update i_size if the
space already exists.  With this patch we now pass xfstests 075.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

We need to truncate page cache pages for the clone ioctl target range or
else we'll confuse ourselves to no end.  If the old data was cached, we
used to still see it (until remount).  If the page was partially updated
we used to get a mix of old and new data.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

sync_pending is uninitialized before it be used, fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Btrfs subtracted the size of the allocated space twice when it allocated
the space from the bitmap in the cluster, it broke the free space information
and led to oops finally.

And this patch also fixes the bug that ctl->free_space was subtracted
without lock.
Reported-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

We don't use the defrag struct on this path.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

We've stopped using highmem for extent buffers.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

The filesystem turns readonly instead of returning the error to the
caller when detected error in btrfs_drop_snapshot().
and, because the caller doesn't check the error, the function type is
changed to 'void'.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

When checking if there is enough space for balancing a block group,
since we do not take raid types into consideration, we do not account
corrent amounts of space that we needed.  This makes us do some extra
work before we get ENOSPC.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

When balancing, we'll first try to shrink devices for some space,
but if it is working on a full multi-disk partition with raid protection,
we may encounter a bug, that is, while shrinking, total_bytes may be less
than bytes_used, and btrfs may allocate a dev extent that accesses out of
device's bounds.

Then we will not be able to write or read the data which stores at the end
of the device, and get the followings:

device fsid 0939f071-7ea3-46c8-95df-f176d773bfb6 devid 1 transid 10 /dev/sdb5
Btrfs detected SSD devices, enabling SSD mode
btrfs: relocating block group 476315648 flags 9
btrfs: found 4 extents
attempt to access beyond end of device
sdb5: rw=145, want=546176, limit=546147
attempt to access beyond end of device
sdb5: rw=145, want=546304, limit=546147
attempt to access beyond end of device
sdb5: rw=145, want=546432, limit=546147
attempt to access beyond end of device
sdb5: rw=145, want=546560, limit=546147
attempt to access beyond end of device
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

When btrfs recovers from a crash, it may hit the oops below:

------------[ cut here ]------------
kernel BUG at fs/btrfs/inode.c:4580!
[...]
RIP: 0010:[<ffffffffa03df251>]  [<ffffffffa03df251>] btrfs_add_link+0x161/0x1c0 [btrfs]
[...]
Call Trace:
 [<ffffffffa03e7b31>] ? btrfs_inode_ref_index+0x31/0x80 [btrfs]
 [<ffffffffa04054e9>] add_inode_ref+0x319/0x3f0 [btrfs]
 [<ffffffffa0407087>] replay_one_buffer+0x2c7/0x390 [btrfs]
 [<ffffffffa040444a>] walk_down_log_tree+0x32a/0x480 [btrfs]
 [<ffffffffa0404695>] walk_log_tree+0xf5/0x240 [btrfs]
 [<ffffffffa0406cc0>] btrfs_recover_log_trees+0x250/0x350 [btrfs]
 [<ffffffffa0406dc0>] ? btrfs_recover_log_trees+0x350/0x350 [btrfs]
 [<ffffffffa03d18b2>] open_ctree+0x1442/0x17d0 [btrfs]
[...]

This comes from that while replaying an inode ref item, we forget to
check those old conflicting DIR_ITEM and DIR_INDEX items in fs/file tree,
then we will come to conflict corners which lead to BUG_ON().
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Tested-by: Andy Lutomirski <luto@mit.edu>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

We have a problem where if a user specifies discard but doesn't actually support
it we will return EOPNOTSUPP from btrfs_discard_extent.  This is a problem
because this gets called (in a fashion) from the tree log recovery code, which
has a nice little BUG_ON(ret) after it, which causes us to fail the tree log
replay.  So instead detect wether our devices support discard when we're adding
them and then don't issue discards if we know that the device doesn't support
it.  And just for good measure set ret = 0 in btrfs_issue_discard just in case
we still get EOPNOTSUPP so we don't screw anybody up like this again.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Btrfs does bio submissions from a worker thread, and each device
has a list of high priority bios and regular priority bios.

Synchronous writes go to the high priority thread while async writes
go to regular list.  This commit brings back an explicit unplug
any time we switch from high to regular priority, which makes it
easier for the block layer to give us low latencies.
Signed-off-by: Chris Mason <chris.mason@oracle.com>

When doing a writepage we call writepages to try and write out any other dirty
pages in the area.  This could cause problems where we commit a transaction and
then have somebody else dirtying metadata in the area as we could end up writing
out a lot more than we care about, which could cause latency on anybody who is
waiting for the transaction to completely finish committing.  Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

The variable 'last_index' is calculated in the __btrfs_buffered_write
function and passed as a parameter to the prepare_pages function,
but is not used anywhere in the prepare_pages function.

Remove instances of 'last_index' in these functions.
Signed-off-by: Mitch Harder <mitch.harder@sabayonlinux.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

find_first_extent_bit() and find_first_extent_bit_state() share
most of the code, and we can just make the former call the latter.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

We can just use cond_resched_lock().
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Don't duplicate set_state_bits().
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

These members are not used at all.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

unpin_extent_cache() and add_extent_mapping() shares the same code
that merges extent maps.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

lookup_extent_map() and search_extent_map() can share most of code.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

rb_node returned by __tree_search() can be a valid pointer or NULL,
but won't be some errno.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

When we search a dir item with a specific hash code, we can
just return NULL without further checking if btrfs_search_slot()
returns 1.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

So there's no overhead for something we don't use.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Since commit f2a97a9d
("btrfs: remove all unused functions"), there's no extern functions
at all in ref-cache.c, so just remove the remaining dead code.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

wait_for_commit() always returns 0.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Use wait_event() when possible to avoid code duplication.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

If mounting with nodatasum option, we won't csum file data for
general write or direct-io write, and this rule should also be
applied when writing compressed files.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Memory areas [ptr, ptr+total_len] and [name, name+total_len]
may overlap, so it's wrong to use memcpy().
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

In __btrfs_free_extent we will print the leaf if we fail to find the extent we
wanted, but the problem is if we get an error we won't have a leaf so often this
leads to a NULL pointer dereference and we lose the error that actually
occurred.  So only print the leaf if ret > 0, which means we didn't find the
item we were looking for but we didn't error either.  This way the error is
preserved.
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

This is fairly trivial - btrfs_set_root_node() - always returns zero so we
can just make it void.  All callers ignore the return code now anyway.  I
also made sure to check that none of the functions that
btrfs_set_root_node() calls returns an error that we might have needed to
catch and pass back.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Here I have a two SSD-partitions btrfs, and they are defaultly set to
"data=raid0, metadata=raid1", then I try to fill my btrfs partition
till "No space left on device", via "dd if=/dev/zero of=/mnt/btrfs/tmp".

I get an oops panic from kernel BUG at fs/btrfs/extent-tree.c:5199!, which
refers to find_free_extent's
BUG_ON(index != get_block_group_index(block_group));

In SSD mode, in order to find enough space to alloc, we may check the
block_group cache which has been checked sometime before, but the index is not
updated, where it hits the BUG_ON.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Acked-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

The access for ro in btrfs_block_group_cache should be protected
because of the racy lock in relocation.
Signed-off-by: Wu Bo <wu.bo@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

The set/clear bit and the extent split/merge hooks only ever return 0.

 Changing them to return void simplifies the error handling cases later.

 This patch changes the hook prototypes, the single implementation of each,
 and the functions that call them to return void instead.

 Since all four of these hooks execute under a spinlock, they're necessarily
 simple.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

We passed the wrong value to btrfs_force_ra(). Fix this by changing
the argument of btrfs_force_ra() from last_index to nr_page.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

When btrfs_unlink_inode() and btrfs_orphan_add() in btrfs_unlink()
are error, the error code is returned to the caller instead of
BUG_ON().
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Don't need to check the return value of __btrfs_add_inode_defrag(),
since it will always return 0.
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

Merge branch 'alloc_path' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/btrfs-error-handling into for-linus