into tp1.ruhr-uni-bochum.de:/home/kai/kernel/v2.5/linux-2.5.make

into home.transmeta.com:/home/torvalds/v2.5/linux

into tp1.ruhr-uni-bochum.de:/home/kai/kernel/v2.5/linux-2.5.make-as

This patch updates the orinoco wireless driver to 0.11b.  This fixes
several kfree()-of-bad-address bugs.

into home.transmeta.com:/home/torvalds/v2.5/linux

into tp1.ruhr-uni-bochum.de:/home/kai/kernel/v2.5/linux-2.5.isdn

into home.transmeta.com:/home/torvalds/v2.5/linux

into flint.arm.linux.org.uk:/usr/src/linux-bk-2.5/linux-2.5-rmk

Fixes lockup on SMP boxes, and fixes buggy map scanning code.

we fix ARM720T support - this CPU has unified writethrough caches
only, so we can't use the Harvard cache operations when copying
pages.  Also, we don't have to evict cache entries during copypage.

Use the standard new-style pci_driver::remove to unregister
drivers at module unload time.

PCMCIA obviously has its own way of handling removing, the ISA
drivers unregister at module unload time as well.

Don't use a special CAPI solution to tell the drivers about 
ISA cards but use module parameters, just as other drivers do.

Internally use struct pci_dev to save that data - hopefully
one day the device tree will provide a nicer way to achieve this.

Use common function for setting the revision strings.

We now control rely on ->owner and the upper level to control the
module use count.

into tp1.ruhr-uni-bochum.de:/home/kai/kernel/v2.5/linux-2.5.isdn

into tp1.ruhr-uni-bochum.de:/home/kai/kernel/v2.5/linux-2.5.make-clean

init/version.o includes include/linux/compile.h. As compile.h was
regenerated each time make was run, init/version.o was recompiled each
time.

To avoid this, use the following solution: Generate a temporary new
compile.h, and only replace the old one if the new one is different.

We consider the files different if more than just date/time changed, since
otherwise we would have to rebuild every time anyway.

Still, the two files turned out to be different all the time, as we put
a generation number into them which is incremented at each invocation of 
"make". The generation number update is now only done when the kernel
config changes, which makes more sense, anyway.

So, the UTS_VERSION and generation number now relate to the time the 
kernel was configured, not the time the actual "make vmlinux" was run, 
which should be fine.

Also, put the #define UTS_MACHINE ... from the command line into
the header as well.

Group related things together, like building vmlinux,
building modules, generating dependency, configuration, etc.

Nobody is building files from the top-level Makefile anyway, and
if they were, they should use the standard assembler rules 
provided by Rules.make

The targets {sgml,ps,pdf,html} docs work as before, but
the handling is now completely in Documentation/DocBook/Makefile.

The ROOT_DEV, SVGA_MODE and RAMDISK variables are i386/x86_64
specific, so move them to arch/$(ARCH)/boot/Makefile, this
is where they are used.

They still can be overridden on the command line like before,
though I doubt anybody is still using them.

 - Rewrite ioctl handling.

 - Apply fix for hpt366 "hang on boot" by Andre.

 - Remove stale XXX_tune_req. It was no longer used.

 - Propagate rq through ide_error(), ide_end_drive_cmd(), ide_dump_status(),
   ide_wait_stat().

 - Push the current drive down to ata_channel from hwgroup.

 - Push the timer down to the ata_channel structure. Most probably it will end
   at the drive.

Any potential BE arm port can fix this up later.

into home.transmeta.com:/home/torvalds/v2.5/linux

into home.transmeta.com:/home/torvalds/v2.5/linux

drivers.  Most of this is from 2.4.  Almost all of this work was
done by Ben Herrenschmidt.

Ok, here it is.  The following arch are not covered:
Mips, Mips64 in 32-bit mode, parisc in __LP64__ mode.

In addition, x86_64 mentions jiffies in the existing script.
This may be a problem.

This prevents a deadlock in JFS.

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux

into tp1.ruhr-uni-bochum.de:/home/kai/kernel/v2.5/linux-2.5.isdn.capi

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux

Noted by Keith Owens.

This removes the old alternates to export_operations for exporting a
filesystem.

It removes fh_to_dentry, dentry_to_fh, and s_nfsd_free_path_sem.  It
also removes a lot of code.

The fs/ntfs change is because it was setting fh_to_dentry and
dentry_to_fh (which no longer exist) to NULL.