into ppc970.osdl.org:/home/torvalds/v2.6/linux

cc-version needs to use $(shell to get the gcc version.
Before if gave the following error when building the kernel:

/bin/sh: line 1: [: too many arguments

And all checks for gcc version were broken.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

into mars.ravnborg.org:/home/sam/bk/kbuild

into mars.ravnborg.org:/home/sam/bk/kbuild

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Forgot one command, GPCMD_SEND_CUE_SHEET is also ok for write open.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

If tty_open() fails for a normal serial device, we end up doing cleanups
that should only happen for failed open of /dev/ptmx.  The results are
not pretty - devpts et.al.  end up very confused.  That's what gave
problems with ptmx.

This splits ptmx file_operations from the normal case and cleans up both
tty_open() and (new) ptmx_open().  Survived serious beating.

Update architectures for the free_area_init_node() API change.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

That conversion to nfs_fh_copy() is bogus since we're not copying into
an nfs_fh anyway. Just revert it.

The patch below replaces all occurences of two bouncing email addresses of
Alex deVries in the kernel with his current address.

It's already ACK'ed by Alex deVries.
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Describe what the Intel cache descriptors actually mean in comments.  Taken
from 24151827.pdf.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The patch below fixes an interesting oddity we're seeing with fedora core
development (where we recently started using udev heavily); basically right
now filelock_init() is a module_init(), eg runs late.  However that breaks
down because there are earlier /sbin/hotplug callouts, which with udev, do
locking operations.  When that happens the kernel oopses because the slabs
for file locks aren't initialized yet.

Solution: initialize this way early.  It's only a kmem_cache_create after
all, so can happen early.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This entry was removed during 2.5 development.
Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This entry is long gone, even 2.4 doesnt have it anymore.
Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

ncfpfs seems to update inode times by hand everywhere instead of using
the proper helpers.  This means:

 - the atime updates in mmap() and read() seems to miss various checks
   upodate_atime or one of the wrappers does.  Also it doesn't mark the
   inode dirty.
 - in write() you update mtime and _a_time instead of ctime as expected,
   also the usual checks and optimizations are missing.

In addition the fops contain some bogus checks like for a refular file (but
the fops are only used of ISREG files) and inode->i_sb although that is
guranteed to be non-zero.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

  The patch below enable to display the size of Active/Inactive pages on
  per-node meminfo (/sys/devices/system/node/node%d/meminfo) like
  /proc/meminfo.

  By a little change to procps, "vmstat -a" can show these statistics about
  particular node.

From: mita akinobu <amgta@yacht.ocn.ne.jp>

  get_zone_counts() is used by max_sane_readahead(), and
  max_sane_readahead() is often called in filemap_nopage().
Signed-off-by: Akinobu Mita <amgta@yacht.ocn.ne.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Recently, someone has kvetched that RNDGETPOOL is a "security
vulnerability".  Never mind that it is superuser only, and with superuser
privs you could load a nasty kernel module, or read the entropy pool out of
/dev/mem directly, but they are nevertheless still spreading FUD.

In any case, no one is using it (it was there for debugging purposes only),
so we can remove it as dead code.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch adds a separate pool for use with /dev/urandom.  This prevents a
/dev/urandom read from being able to completely drain the entropy in the
/dev/random pool, and also makes it much more difficult for an attacker to
carry out a state extension attack.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This adds a pool name to the entropy_store data structure, which simplifies
the debugging code, and makes the code more generic for adding additional
entropy pools.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Based on reports from Ingo's Latency Tracer that the TCP sequence number
rekey code is causing latency problems, I've moved the sequence number
rekey to be done out of a workqueue.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Marcelo points out that this function's main caller already memsets the
structure, so avoid doing it again.

Also, an earlier knfsd patch withdrew file_ra_state_init()'s other caller, so
unexport this function.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The author and maintainer of the firmware loader died in May.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Christoph Hellwig <hch@lst.de>

There's two callers:

 - the truncate path via notify_change, ->setattr, vmtruncate.  We
   already check for permissions here at the upper level
 - fat_delete_inode.  This one looks bogus to me - even if we delete
   an read-only or immutable inode we want to free the space allocated
   by it, else you leak disk blocks.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

We received a bug report that /proc/PID/cmdline only shows argv[0] if the
total length of all arguments exceeds PAGE_SIZE.  The problem is that
proc_pid_cmdline checks for the presence of a NUL byte at the end of the
args list, and assumes that the application did a setproctitle if there's
any other character.

OTOH proc_pid_cmdline will read just the first PAGE_SIZE worth of arguments
at most, and if you have more arguments, it's quite likely that there won't
be a NUL byte at offset PAGE_SIZE-1.

The attached patch fixes this.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The TSS no longer needs to be unbusied before loading the task register, since
the set_tss_desc macros set the system gate type to Available IA-32 TSS.  This
obscure, uncommented legacy code can now be removed for better readability and
saves 20 bytes of code space. 
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

  When using bounce buffers for SG_IO commands with unaligned buffers in
  blk_rq_map_user(), we should free the pages from blk_rq_unmap_user() which
  calls bio_uncopy_user() for the non-BIO_USER_MAPPED case.  That function
  failed to free the pages for write requests.

  So we leaked pages and you machine would go OOM.  Rebooting helped ;-)

  This bug was triggered by writing audio CDs (but not on data CDs), as the
  audio frames are not aligned well (2352 bytes), so the user pages don't just
  get mapped.

  Bug was reported by Mathias Homan and debugged by Chris Mason + me.  (Jens
  is away.)

From: Chris Mason <mason@suse.com>

  Fix the leak for real
Signed-off-by: Kurt Garloff <garloff@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Heiko Carstens <heiko.carstens@de.ibm.com>
From: Andreas Herrmann <aherrman@de.ibm.com>
From: Maxim Shchetynin <maxim@de.ibm.com>

zfcp host adapter changes:
 - Use predefined macro to create in_recovery sysfs attributes.
 - Add function to check CT_IU response.
 - Fix handling of rejected ELS commands.
 - Change return value of zfcp_fsf_req_sbal_get to -ERESTARTSYS in some cases.
 - Return proper error code if control file upload/download failed.
 - Remove dead code.
 - Avoid sparse warnings.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Jan Glauber <jan.glauber@de.ibm.com>
From: Martin Schwidefsky <schwidefsky@de.ibm.com>

s390 core changes:
 - Use copy_siginfo_from_user32 instead of copy_from_user to get the
   siginfo structure in sys32_rt_sigqueueinfo.
 - Remove prototype for non-existant stop_timers function.
 - Regenerate default configuration.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

From: Arjan van de Ven <arjanv@redhat.com>

The patch below sets the tainted sysctl file to read only, otherwise
userspace can just overwrite/reset it.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch is thanks to pavouk.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Coding style document is not consistent with itself on whether there
should be space after ","... This makes it standardize on ", " option.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The ramdisk_blocksize option has been broken for quite a while in 2.6.
Making an initrd with a 4K ext2 filesystem impossible to use.

After digging into this, the problem turned out to that rd.c was not
setting the hard sector size.  There were a few secondary problems like
i_blkbits was not being set, and the number KiB in uncompressed ext2 images
was not taking into account the block size.

I have also corrected the surrounding comments as they were not just
incorrect but misleading.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

For some reasons ls -l /proc/$$/exe doesnt work all time for me,
with 2.6.8.1 on ppc64. Sometimes it does, sometimes not. No pattern.
A few printks show that this check in proc_pid_readlink() triggers
an -EACCES:

	current->fsuid != inode->i_uid

proc_pid_readlink(755) error -13 ntptrace(11408) fsuid 100 i_uid 0 0
sys_readlink(281) ntptrace(11408) error -13 readlink
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The drivers under drivers/media/dvb/ttpci depend on pci (especially since
they select VIDEO_SAA7146, which depends on pci).
Signed-off-by: Cornelia Huck <kernel@cornelia-huck.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Maximilian Attems <janitor@sternwelten.at>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>