- 13 Oct, 2011 4 commits
-
-
Peter De Schrijver authored
This patch splits out the common part of pinmux and GPIO initialization for seaboard and derived boards. This code is based on work done by Jong Kim <jongk@nvidia.com>. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Stephen Warren authored
Use ioremap to obtain access to registers instead of using static mappings. This reduces the number of users of the static mappings, which will eventually allow them to be removed. Note that on Tegra30, the number of register "banks" will decrease to 2, and the packing of specific bits into registers will change significantly. That's why this change adds the "*_bank" fields to the pingroup tables, rather than implementing some more hard-coded scheme. Also, completely remove the implementation of suspend/resume; Tegra doesn't yet support suspend/resume, and the implementation is complex for the general pinmux driver: * Not all registers are used within each bank, so we probably shouldn't just iterate over every register in the bank, and save/restore it, since that would mean touching undefined registers. * Registers are shared between pingroups, so we can't simply iterate over each pingroup, and save/restore the registers it uses. It'd probably be best have probe() calculate a bitmask of actually-used registers for each bank, and have suspend/resume iterate over those bitmaps. Oh, and Real Soon Now, I should be looking into converting this driver to the new pinmux/pinctrl subsystem, so I didn't want to put too much work into the current incarnation. v2: s/space/bank/ to match comments on reg_* fields in pinmux.h. Re-order bank/reg parameters to pg_readl/pg_writel. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Stephen Warren authored
v3: Make regs variable static. Remove empty init of tegra_gpio_banks. v2: Retrieve IRQ and memory addresses from resources instead of hard- coding them. Add back initialization of tegra_gpio_chip.of_node. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> [olof: switched probe routine to __devinit] Signed-off-by: Olof Johansson <olof@lixom.net>
-
Stephen Warren authored
Signed-off-by: Stephen Warren <swarren@nvidia.com> [olof: switch probe function to __devinit] Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 12 Oct, 2011 2 commits
-
-
Stephen Warren authored
Add a pinmux node to tegra20.dtsi in order to instantiate the future pinmux device. v2: Specify reg property precisely; don't just point at the whole APB_MISC register range. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Stephen Warren authored
The Tegra GPIO driver will be converted from static registration via postcore_initcall() to be a platform device later in this patch series. A new Tegra pinmux platform device will also be added. Prepare for this by modifying all boards to register the appropriate platform devices before-hand, so that when the drivers are converted, those devices will be probed, and git bisectability will be maintained. v2: Add resource definitions for GPIO and pinmux Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 05 Oct, 2011 1 commit
-
-
Linus Torvalds authored
-
- 04 Oct, 2011 12 commits
-
-
git://github.com/davem330/netLinus Torvalds authored
* git://github.com/davem330/net: pch_gbe: Fixed the issue on which a network freezes pch_gbe: Fixed the issue on which PC was frozen when link was downed. make PACKET_STATISTICS getsockopt report consistently between ring and non-ring net: xen-netback: correctly restart Tx after a VM restore/migrate bonding: properly stop queuing work when requested can bcm: fix incomplete tx_setup fix RDSRDMA: Fix cleanup of rds_iw_mr_pool net: Documentation: Fix type of variables ibmveth: Fix oops on request_irq failure ipv6: nullify ipv6_ac_list and ipv6_fl_list when creating new socket cxgb4: Fix EEH on IBM P7IOC can bcm: fix tx_setup off-by-one errors MAINTAINERS: tehuti: Alexander Indenbaum's address bounces dp83640: reduce driver noise ptp: fix L2 event message recognition
-
git://github.com/tiwai/soundLinus Torvalds authored
* 'fix/asoc' of git://github.com/tiwai/sound: ASoC: omap_mcpdm_remove cannot be __devexit ASoC: Fix setting update bits for WM8753_LADC and WM8753_RADC ASoC: use a valid device for dev_err() in Zylonite
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms: fix channel_remap setup (v2) drm/radeon: Set cursor x/y to 0 when x/yorigin > 0. drm/radeon: Update AVIVO cursor coordinate origin before x/yorigin calculation. drm/radeon: Simplify cursor x/yorigin calculation. drm/radeon/kms: fix cursor image off-by-one error drm/radeon/kms: Fix logic error in DP HPD handler drm/radeon/kms: add retry limits for native DP aux defer drm/radeon/kms: fix regression in DP aux defer handling
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6: spi-topcliff-pch: Fix overrun issue spi-topcliff-pch: Add recovery processing in case FIFO overrun error occurs spi-topcliff-pch: Fix CPU read complete condition issue spi-topcliff-pch: Fix SSN Control issue spi-topcliff-pch: add tx-memory clear after complete transmitting
-
Jon Mason authored
Add the ability to disable PCI-E MPS turning and using the BIOS configured MPS defaults. Due to the number of issues recently discovered on some x86 chipsets, make this the default behavior. Also, add the option for peer to peer DMA MPS configuration. Peer to peer DMA is outside the scope of this patch, but MPS configuration could prevent it from working by having the MPS on one root port different than the MPS on another. To work around this, simply make the system wide MPS the smallest possible value (128B). Signed-off-by: Jon Mason <mason@myri.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alex Deucher authored
Most asics just use the hw default value which requires no explicit programming. For those that need a different value, the vbios will program it properly. As such, there's no need to program these registers explicitly in the driver. Changing MC_SHARED_CHREMAP requires a reload of all data in vram otherwise its contents will be scambled. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=40103 v2: drop now unused channel_remap functions. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Tomoya MORINAGA authored
We found that adding load, Rx data sometimes drops.(with DMA transfer mode) The cause is that before starting Rx-DMA processing, Tx-DMA processing starts. This causes FIFO overrun occurs. This patch fixes the issue by modifying FIFO tx-threshold and DMA descriptor size like below. Current this patch Rx-descriptor 4Byte+12Byte*341 --> 12Byte*340-4Byte-12Byte Rx-threshold (Not modified) Tx-descriptor 4Byte+12Byte*341 --> 16Byte-12Byte*340 Rx-threshold 12Byte --> 2Byte Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-
Tomoya MORINAGA authored
Add recovery processing in case FIFO overrun error occurs with DMA transfer mode. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-
Tomoya MORINAGA authored
We found Rx data sometimes drops.(with non-DMA transfer mode) The cause is read complete condition is not true. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-
Tomoya MORINAGA authored
During processing 1 command/data series, SSN should keep LOW. However, currently, SSN becomes HIGH. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-
Tomoya MORINAGA authored
Currently, in case of reading date from SPI flash, command is sent twice. The cause is that tx-memory clear processing is missing . This patch adds the tx-momory clear processing. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-
Takashi Iwai authored
Commit 2a7fade7 ("hwmon: lis3: Power on corrections") caused a regression on HP laptops with 8bit chip. Writing CTRL2_BOOT_8B bit seems clearing the BIOS setup, and no proper interrupt for DriveGuard will be triggered any more. Since the init code there is basically only for embedded devices, put a pdata check so that the problematic initialization will be skipped for hp_accel stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: Eric Piel <eric.piel@tremplin-utc.net> Cc: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 03 Oct, 2011 18 commits
-
-
git://github.com/groeck/linuxLinus Torvalds authored
* 'hwmon-for-linus' of git://github.com/groeck/linux: hwmon: (coretemp) Avoid leaving around dangling pointer hwmon: (coretemp) Fixup platform device ID change
-
git://github.com/davem330/ideLinus Torvalds authored
* git://github.com/davem330/ide: ide-disk: Fix request requeuing
-
git://github.com/chrismason/linuxLinus Torvalds authored
* 'btrfs-3.0' of git://github.com/chrismason/linux: Btrfs: force a page fault if we have a shorty copy on a page boundary
-
Borislav Petkov authored
Simon Kirby reported that on his RAID setup with idedisk underneath the box OOMs after a couple of days of runtime. Running with CONFIG_DEBUG_KMEMLEAK pointed to idedisk_prep_fn() which unconditionally allocates an ide_cmd struct. However, ide_requeue_and_plug() can be called more than once per request, either from the request issue or the IRQ handler path and do blk_peek_request() ends up in idedisk_prep_fn() repeatedly, allocating a struct ide_cmd everytime and "forgetting" the previous pointer. Make sure the code reuses the old allocated chunk. Reported-and-tested-by: Simon Kirby <sim@hostway.ca> Cc: <stable@kernel.org> [ 39.x, 3.0.x ] Link: http://marc.info/?l=linux-kernel&m=131667641517919 Link: http://lkml.kernel.org/r/20110922072643.GA27232@hostway.caSigned-off-by: Borislav Petkov <bp@alien8.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Toshiharu Okada authored
The pch_gbe driver has an issue which a network stops, when receiving traffic is high. In the case, The link down and up are necessary to return a network. This patch fixed this issue. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Toshiharu Okada authored
When a link was downed during network use, there is an issue on which PC freezes. This patch fixed this issue. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Willem de Bruijn authored
This is a minor change. Up until kernel 2.6.32, getsockopt(fd, SOL_PACKET, PACKET_STATISTICS, ...) would return total and dropped packets since its last invocation. The introduction of socket queue overflow reporting [1] changed drop rate calculation in the normal packet socket path, but not when using a packet ring. As a result, the getsockopt now returns different statistics depending on the reception method used. With a ring, it still returns the count since the last call, as counts are incremented in tpacket_rcv and reset in getsockopt. Without a ring, it returns 0 if no drops occurred since the last getsockopt and the total drops over the lifespan of the socket otherwise. The culprit is this line in packet_rcv, executed on a drop: drop_n_acct: po->stats.tp_drops = atomic_inc_return(&sk->sk_drops); As it shows, the new drop number it taken from the socket drop counter, which is not reset at getsockopt. I put together a small example that demonstrates the issue [2]. It runs for 10 seconds and overflows the queue/ring on every odd second. The reported drop rates are: ring: 16, 0, 16, 0, 16, ... non-ring: 0, 15, 0, 30, 0, 46, 0, 60, 0 , 74. Note how the even ring counts monotonically increase. Because the getsockopt adds tp_drops to tp_packets, total counts are similarly reported cumulatively. Long story short, reinstating the original code, as the below patch does, fixes the issue at the cost of additional per-packet cycles. Another solution that does not introduce per-packet overhead is be to keep the current data path, record the value of sk_drops at getsockopt() at call N in a new field in struct packetsock and subtract that when reporting at call N+1. I'll be happy to code that, instead, it's just more messy. [1] http://patchwork.ozlabs.org/patch/35665/ [2] http://kernel.googlecode.com/files/test-packetsock-getstatistics.cSigned-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Vrabel authored
If a VM is saved and restored (or migrated) the netback driver will no longer process any Tx packets from the frontend. xenvif_up() does not schedule the processing of any pending Tx requests from the front end because the carrier is off. Without this initial kick the frontend just adds Tx requests to the ring without raising an event (until the ring is full). This was caused by 47103041 (net: xen-netback: convert to hw_features) which reordered the calls to xenvif_up() and netif_carrier_on() in xenvif_connect(). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andy Gospodarek authored
During a test where a pair of bonding interfaces using ARP monitoring were both brought up and torn down (with an rmmod) repeatedly, a panic in the timer code was noticed. I tracked this down and determined that any of the bonding functions that ran as workqueue handlers and requeued more work might not properly exit when the module was removed. There was a flag protected by the bond lock called kill_timers that is set when the interface goes down or the module is removed, but many of the functions that monitor link status now unlock the bond lock to take rtnl first. There is a chance that another CPU running the rmmod could get the lock and set kill_timers after the first check has passed. This patch does not allow any function to queue work that will make itself run unless kill_timers is not set. I also noticed while doing this work that bond_resend_igmp_join_requests did not have a check for kill_timers, so I added the needed call there as well. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Reported-by: Liang Zheng <lzheng@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michel Dänzer authored
Apart from the obvious cleanup, this should make the line cursor_end = x - xorigin + w; correct now. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Michel Dänzer authored
Fixes cursor disappearing prematurely when moving off a top/left edge which is not located at the desktop top/left edge. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Cc: stable@kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Michel Dänzer authored
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Nicholas Miell authored
The mouse cursor hotspot calculation when the cursor is partially off the top or left side of the screen was off by one. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=41158Signed-off-by: Nicholas Miell <nmiell@gmail.com> Reviewed-by: Michel Dänzer <michel@daenzer.net> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
Only disable the pipe if the monitor is physically disconnected. The previous logic also disabled the pipe if the link was trained. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=41248Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
The previous code could potentially loop forever. Limit the number of DP aux defer retries to 4 for native aux transactions, same as i2c over aux transactions. Noticed by: Brad Campbell <lists2009@fnarfbargle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Brad Campbell <lists2009@fnarfbargle.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
An incorrect ordering in the error checking code lead to DP aux defer being skipped in the aux native write path. Move the bytes transferred check (ret == 0) below the defer check. Tracked down by: Brad Campbell <brad@fnarfbargle.com> Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=41121Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Brad Campbell <brad@fnarfbargle.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
-
git://git.infradead.org/users/sameo/mfd-2.6Linus Torvalds authored
* 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6: mfd: Fix generic irq chip ack function name for jz4740-adc
-
git://github.com/tiwai/soundLinus Torvalds authored
* 'for-linus' of git://github.com/tiwai/sound: ALSA: hda - Fix a regression of the position-buffer check
-
- 02 Oct, 2011 3 commits
-
-
Arnd Bergmann authored
omap_mcpdm_remove is used from asoc_mcpdm_probe, which is an initcall, and must not be discarded when HOTPLUG is disabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Axel Lin authored
Current code set update bits for WM8753_LDAC and WM8753_RDAC twice, but missed setting update bits for WM8753_LADC and WM8753_RADC. I think it is a copy-paste bug in commit 776065 "ASoC: codecs: wm8753: Fix register cache incoherency". Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
Arnd Bergmann authored
A recent conversion has introduced references to &pdev->dev, which does not actually exist in all the contexts it's used in. Replace this with card->dev where necessary, in order to let the driver build again. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-