- 05 Nov, 2019 2 commits
-
-
Ian Kent authored
Eliminate struct xfs_mount field m_fsname by using the super block s_id field directly. Signed-off-by:
Ian Kent <raven@themaw.net> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Ian Kent authored
The struct xfs_mount field m_fsname_len is not used anywhere, remove it. Signed-off-by:
-
- 04 Nov, 2019 3 commits
-
-
Darrick J. Wong authored
Make sure we log something to dmesg whenever we return -EFSCORRUPTED up the call stack. Signed-off-by:
Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by:
-
Darrick J. Wong authored
Some of the xfs error message functions take a pointer to a buffer that will be dumped to the system log. The logging functions don't change the contents, so constify all the parameters. This enables the next patch to ensure that we log bad metadata when we encounter it. Signed-off-by:
-
Darrick J. Wong authored
Each of the four functions that operate on shortform directories checks that the directory's di_size is at least as large as the shortform directory header. This is now checked by the inode fork verifiers (di_size is used to allocate if_bytes, and if_bytes is checked against the header structure size) so we can turn these checks into ASSERTions. Signed-off-by:
-
- 03 Nov, 2019 9 commits
-
-
Christoph Hellwig authored
Always set XFS_ALLOC_USERDATA for data fork allocations, and check it in xfs_alloc_is_userdata instead of the current obsfucated check. Also remove the xfs_alloc_is_userdata and xfs_alloc_allow_busy_reuse helpers to make the code a little easier to understand. Signed-off-by:
-
Christoph Hellwig authored
Move the extent zeroing case there for the XFS_BMAPI_ZERO flag outside the low-level allocator and into xfs_bmapi_allocate, where is still is in transaction context, but outside the very lowlevel code where it doesn't belong. Signed-off-by:
-
Christoph Hellwig authored
Avoid duplicate userdata and data fork checks by restructuring the code so we only have a helper for userdata allocations that combines these checks in a straight foward way. That also helps to obsoletes the comments explaining what the code does as it is now clearly obvious. Signed-off-by:
-
Christoph Hellwig authored
Move the EOF alignment and checking for the next allocated extent into the callers to avoid the need to pass the byte based offset and count as well as looking at the incoming imap. The added benefit is that the caller can unlock the incoming ilock and the function doesn't have funny unbalanced locking contexts. Signed-off-by:
-
Christoph Hellwig authored
Even if we are asked for a write layout there is no point in logging the inode unless we actually modified it in some way. Signed-off-by:
-
Christoph Hellwig authored
We should never see delalloc blocks for a pNFS layout, write or not. Adjust the assert to check for that. Signed-off-by:
-
Christoph Hellwig authored
And move the code dependent on it to the one caller that cares instead. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
By open coding xfs_bmap_last_extent instead of calling it through a double indirection we don't need to handle an error return that can't happen given that we are guaranteed to have the extent list in memory already. Also simplify the calling conventions a little and move the extent list assert from the only caller into the function. Signed-off-by:
-
- 31 Oct, 2019 1 commit
-
-
Dave Chinner authored
AIO+DIO can extend the file size on IO completion, and it holds no inode locks while the IO is in flight. Therefore, a race condition exists in file size updates if we do something like this: aio-thread fallocate-thread lock inode submit IO beyond inode->i_size unlock inode ..... lock inode break layouts if (off + len > inode->i_size) new_size = off + len ..... inode_dio_wait() <blocks> ..... completes inode->i_size updated inode_dio_done() .... <wakes> <does stuff no long beyond EOF> if (new_size) xfs_vn_setattr(inode, new_size) Yup, that attempt to extend the file size in the fallocate code turns into a truncate - it removes the whatever the aio write allocated and put to disk, and reduced the inode size back down to where the fallocate operation ends. Fundamentally, xfs_file_fallocate() not compatible with racing AIO+DIO completions, so we need to move the inode_dio_wait() call up to where the lock the inode and break the layouts. Secondly, storing the inode size and then using it unchecked without holding the ILOCK is not safe; we can only do such a thing if we've locked out and drained all IO and other modification operations, which we don't do initially in xfs_file_fallocate. It should be noted that some of the fallocate operations are compound operations - they are made up of multiple manipulations that may zero data, and so we may need to flush and invalidate the file multiple times during an operation. However, we only need to lock out IO and other space manipulation operations once, as that lockout is maintained until the entire fallocate operation has been completed. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
-
- 29 Oct, 2019 19 commits
-
-
Christoph Hellwig authored
No need for a trivial wrapper. Signed-off-by:
-
Christoph Hellwig authored
inode64 is the only value remaining in the unset array. Special case the inode32/64 options with an explicit seq_printf that prints either inode32 or inode64, and remove the unset array. Signed-off-by:
-
Christoph Hellwig authored
Remove superflous cast. Signed-off-by:
-
Christoph Hellwig authored
Replace XFS_MOUNT_COMPAT_IOSIZE with an inverted XFS_MOUNT_LARGEIO flag that makes the usage more clear. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
-
Christoph Hellwig authored
Make the flag match the mount option and usage. Signed-off-by:
-
Christoph Hellwig authored
Rework xfs_parseargs to fill out the default value and then parse the option directly into the mount structure, similar to what we do for other updates, and open code the now trivial updates based on on the on-disk superblock directly into xfs_mountfs. Note that this change rejects the allocsize=0 mount option that has been documented as invalid for a long time instead of just ignoring it. Signed-off-by:
-
Christoph Hellwig authored
Use the allocsize name to match the mount option and usage instead. Signed-off-by:
-
Christoph Hellwig authored
m_readio_blocks is entirely unused, and m_readio_blocks is only used in xfs_stat_blksize in a max statements that is a no-op as it always has the same value as m_writeio_log. Signed-off-by:
-
Christoph Hellwig authored
The -o wsync allocsize overwrite overwrite was part of a special hack for NFSv2 servers in IRIX and has no real purpose in modern Linux, so remove it. Signed-off-by:
-
Christoph Hellwig authored
Move xfs_preferred_iosize to xfs_iops.c, unobsfucate it and also handle the realtime special case in the helper. Signed-off-by:
-
Christoph Hellwig authored
There is no real need for the local variables here - either they are applied to the mount structure, or if the noalign mount option is set the mount will fail entirely if either is set. Removing them helps cleaning up the mount API conversion. Signed-off-by:
-
Ian Kent authored
It appears the biosize mount option hasn't been documented as a valid option since 2005, remove it. Signed-off-by:
-
Christoph Hellwig authored
Stop using the deprecated bio_set_op_attrs helper, and use a single argument to xfs_buf_ioapply_map for the operation and flags. Signed-off-by:
-
Darrick J. Wong authored
xfs_iread_extents open-codes everything in xfs_btree_visit_blocks, so refactor the btree helper to be able to iterate only the records on level 0, then port iread_extents to use it. Signed-off-by:
-
Darrick J. Wong authored
Currently, this function open-codes walking a bmbt to count the extents and blocks in use by a particular inode fork. Since we now have a function to tally extent records from the incore extent tree and a btree helper to count every block in a btree, replace all that with calls to the helpers. Signed-off-by:
-
Darrick J. Wong authored
There are a few places where we return -EIO instead of -EFSCORRUPTED when we find corrupt metadata. Fix those places. Signed-off-by:
-
Darrick J. Wong authored
Actually call namecheck on directory entry names before we hand them over to userspace. Signed-off-by:
-
Darrick J. Wong authored
Actually call namecheck on attribute names before we hand them over to userspace. Signed-off-by:
-
Darrick J. Wong authored
Add missing structure checks in the attribute leaf verifier. Signed-off-by:
-
- 28 Oct, 2019 6 commits
-
-
Christoph Hellwig authored
Remove xfs_zero_file_space and reorganize xfs_file_fallocate so that a single call to xfs_alloc_file_space covers all modes that preallocate blocks. Signed-off-by:
-
Christoph Hellwig authored
If we always have to write out of place preallocating blocks is pointless. We already check for this in the normal falloc path, but the check was missig in the legacy ALLOCSP path. Signed-off-by:
-
Christoph Hellwig authored
These use the same scheme as the pre-existing mapping of the XFS RESVP ioctls to ->falloc, so just extend it and remove the XFS implementation. Signed-off-by:
-
Christoph Hellwig authored
These ioctls are implemented by the VFS and mapped to ->fallocate now, so this code won't ever be reached. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
