- 26 Mar, 2020 32 commits
-
-
Suman Anna authored
The remote processors in OMAP4+ SoCs are equipped with internal timers, like the internal SysTick timer in a Cortex M3/M4 NVIC or the CTM timer within Unicache in IPU & DSP. However, these timers are gated when the processor subsystem clock is gated, making them rather difficult to use as OS tick sources. They will not be able to wakeup the processor from any processor-sleep induced clock-gating states. This can be avoided by using an external timer as the tick source, which can be controlled independently by the OMAP remoteproc driver code, but still allowing the processor subsystem clock to be auto-gated when the remoteproc cores are idle. This patch adds the support for OMAP remote processors to request timer(s) to be used by the remoteproc. The timers are enabled and disabled in line with the enabling/disabling of the remoteproc. The timer data is not mandatory if the advanced device management features are not required. The core timer functionality is provided by the OMAP DMTimer clocksource driver, which does not export any API. The logic is implemented through the timer device's platform data ops. The OMAP remoteproc driver mainly requires ops to request/free a dmtimer, and to start/stop a timer. The split ops helps in controlling the timer state without having to request and release a timer everytime it needs to use the timer. NOTE: If the gptimer is already in use by the time IPU and/or DSP are loaded, the processors will fail to boot. Signed-off-by:
Suman Anna <s-anna@ti.com> Signed-off-by:
Tero Kristo <t-kristo@ti.com> Reviewed-by:
Andrew F. Davis <afd@ti.com> Acked-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200324110035.29907-11-t-kristo@ti.comSigned-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org>
-
Suman Anna authored
Add some checks in the mailbox callback function to limit any processing in the mailbox callback function to only certain currently valid messages, and drop all the remaining messages. A debug message is added to print any such invalid messages when the appropriate trace control is enabled. Co-developed-by:
Subramaniam Chanderashekarapuram <subramaniam.ca@ti.com> Signed-off-by:
-
Tero Kristo authored
The platform data header for OMAP remoteproc is no longer used for anything post ti-sysc and DT conversion, so just remove it completely. Signed-off-by:
-
Suman Anna authored
DRA7xx/AM57xx SoCs have two IPU and up to two DSP processor subsystems for offloading different computation algorithms. The IPU processor subsystem contains dual-core ARM Cortex-M4 processors, and is very similar to those on OMAP5. The DSP processor subsystem is based on the TI's standard TMS320C66x DSP CorePac core. Support has been added to the OMAP remoteproc driver through new DRA7xx specific compatibles for properly probing and booting all the different processor subsystem instances on DRA7xx/AM57xx SoCs - IPU1, IPU2, DSP1 & DSP2. A build dependency with SOC_DRA7XX is added to enable the driver to be built in DRA7xx-only configuration. The DSP boot address programming needed enhancement for DRA7xx as the boot register fields are different on DRA7 compared to OMAP4 and OMAP5 SoCs. The register on DRA7xx contains additional fields within the register and the boot address bit-field is right-shifted by 10 bits. The internal memory parsing logic has also been updated to compute the device addresses for the L2 RAM for DSP devices using relative addressing logic, and to parse two additional RAMs at L1 level - L1P and L1D. This allows the remoteproc driver to support loading into these regions for a small subset of firmware images requiring as such. The most common usage would be to use the L1 programmable RAMs as L1 Caches. The firmware lookup logic also has to be adjusted for DRA7xx as there are (can be) more than one instance of both the IPU and DSP remote processors for the first time in OMAP4+ SoCs. Signed-off-by:
-
Suman Anna authored
The reserved memory nodes are not assigned to platform devices by default in the driver core to avoid the lookup for every platform device and incur a penalty as the real users are expected to be only a few devices. OMAP remoteproc devices fall into the above category and the OMAP remoteproc driver _requires_ specific CMA pools to be assigned for each device at the moment to align on the location of the vrings and vring buffers in the RTOS-side firmware images. So, use the of_reserved_mem_device_init/release() API appropriately to assign the corresponding reserved memory region to the OMAP remoteproc device. Note that only one region per device is allowed by the framework. Signed-off-by:
-
Suman Anna authored
An implementation for the rproc ops .da_to_va() has been added that provides the address translation between device addresses to kernel virtual addresses for internal RAMs present on that particular remote processor device. The implementation provides the translations based on the addresses parsed and stored during the probe. This ops gets invoked by the exported rproc_da_to_va() function and allows the remoteproc core's ELF loader to be able to load program data directly into the internal memories. Signed-off-by:
-
Suman Anna authored
The OMAP remoteproc driver has been enhanced to parse and store the kernel mappings for different internal RAM memories that may be present within each remote processor IP subsystem. Different devices have varying memories present on current SoCs. The current support handles the L2RAM for all IPU devices on OMAP4+ SoCs. The DSPs on OMAP4/OMAP5 only have Unicaches and do not have any L1 or L2 RAM memories. IPUs are expected to have the L2RAM at a fixed device address of 0x20000000, based on the current limitations on Attribute MMU configurations. NOTE: The current logic doesn't handle the parsing of memories for DRA7 remoteproc devices, and will be added alongside the DRA7 support. Signed-off-by:
-
Suman Anna authored
The DSP remote processors on OMAP SoCs require a boot register to be programmed with a boot address, and this boot address needs to be on a 1KB boundary. The current code is simply masking the boot address appropriately without performing any sanity checks before releasing the resets. An unaligned boot address results in an undefined execution behavior and can result in various bus errors like MMU Faults or L3 NoC errors. Such errors are hard to debug and can be easily avoided by adding a sanity check for the alignment before booting a DSP remote processor. Signed-off-by:
-
Suman Anna authored
OMAP4+ SoCs support device tree boot only. The OMAP remoteproc driver is enhanced to support remoteproc devices created through Device Tree, support for legacy platform devices has been deprecated. The current DT support handles the IPU and DSP processor subsystems on OMAP4 and OMAP5 SoCs. The OMAP remoteproc driver relies on the ti-sysc, reset, and syscon layers for performing clock, reset and boot vector management (DSP remoteprocs only) of the devices, but some of these are limited only to the machine-specific layers in arch/arm. The dependency against control module API for boot vector management of the DSP remoteprocs has now been removed with added logic to parse the boot register from the DT node and program it appropriately directly within the driver. The OMAP remoteproc driver expects the firmware names to be provided via device tree entries (firmware-name.) These are used to load the proper firmware during boot of the remote processor. Cc: Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Suman Anna authored
Add the device tree bindings document for the IPU and DSP remote processor devices on OMAP4+ SoCs. Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200324110035.29907-2-t-kristo@ti.comSigned-off-by:
-
Bjorn Andersson authored
Make the PAS and ADSP/CDSP remoteproc drivers implement the panic handler that will invoke a stop to prepare the remoteprocs for post mortem debugging. Reviewed-by:
-
Bjorn Andersson authored
Add a common panic handler that invokes a stop request and sleep enough to let the remoteproc flush it's caches etc in order to aid post mortem debugging. For now a hard coded 200ms is returned to the remoteproc core, this value is taken from the downstream kernel. Reviewed-by:
-
Bjorn Andersson authored
Introduce generic support for handling kernel panics in remoteproc drivers, in order to allow operations needed for aiding in post mortem system debugging, such as flushing caches etc. The function can return a number of milliseconds needed by the remote to "settle" and the core will wait the longest returned duration before returning from the panic handler. Reviewed-by:
-
Bjorn Andersson authored
In order to be able to traverse the mostly read-only rproc_list without locking during panic migrate traversal to be done under rcu_read_lock(). Mutual exclusion for modifications of the list continues to be handled by the rproc_list_mutex and a synchronization point is added before releasing objects that are popped from the list. Reviewed-by:
-
Nikita Shubin authored
Undefined rproc_ops .kick method in remoteproc driver will result in "Unable to handle kernel NULL pointer dereference" in rproc_virtio_notify, after firmware loading if: 1) .kick method wasn't defined in driver 2) resource_table exists in firmware and has "Virtio device entry" defined Let's refuse to register an rproc-induced virtio device if no kick method was defined for rproc. [ 13.180049][ T415] 8<--- cut here --- [ 13.190558][ T415] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 13.212544][ T415] pgd = (ptrval) [ 13.217052][ T415] [00000000] *pgd=00000000 [ 13.224692][ T415] Internal error: Oops: 80000005 [#1] PREEMPT SMP ARM [ 13.231318][ T415] Modules linked in: rpmsg_char imx_rproc virtio_rpmsg_bus rpmsg_core [last unloaded: imx_rproc] [ 13.241687][ T415] CPU: 0 PID: 415 Comm: unload-load.sh Not tainted 5.5.2-00002-g707df13bbbdd #6 [ 13.250561][ T415] Hardware name: Freescale i.MX7 Dual (Device Tree) [ 13.257009][ T415] PC is at 0x0 [ 13.260249][ T415] LR is at rproc_virtio_notify+0x2c/0x54 [ 13.265738][ T415] pc : [<00000000>] lr : [<8050f6b0>] psr: 60010113 [ 13.272702][ T415] sp : b8d47c48 ip : 00000001 fp : bc04de00 [ 13.278625][ T415] r10: bc04c000 r9 : 00000cc0 r8 : b8d46000 [ 13.284548][ T415] r7 : 00000000 r6 : b898f200 r5 : 00000000 r4 : b8a29800 [ 13.291773][ T415] r3 : 00000000 r2 : 990a3ad4 r1 : 00000000 r0 : b8a29800 [ 13.299000][ T415] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 13.306833][ T415] Control: 10c5387d Table: b8b4806a DAC: 00000051 [ 13.313278][ T415] Process unload-load.sh (pid: 415, stack limit = 0x(ptrval)) [ 13.320591][ T415] Stack: (0xb8d47c48 to 0xb8d48000) [ 13.325651][ T415] 7c40: b895b680 00000001 b898f200 803c6430 b895bc80 7f00ae18 [ 13.334531][ T415] 7c60: 00000035 00000000 00000000 b9393200 80b3ed80 00004000 b9393268 bbf5a9a2 [ 13.343410][ T415] 7c80: 00000e00 00000200 00000000 7f00aff0 7f00a014 b895b680 b895b800 990a3ad4 [ 13.352290][ T415] 7ca0: 00000001 b898f210 b898f200 00000000 00000000 7f00e000 00000001 00000000 [ 13.361170][ T415] 7cc0: 00000000 803c62e0 80b2169c 802a0924 b898f210 00000000 00000000 b898f210 [ 13.370049][ T415] 7ce0: 80b9ba44 00000000 80b9ba48 00000000 7f00e000 00000008 80b2169c 80400114 [ 13.378929][ T415] 7d00: 80b2169c 8061fd64 b898f210 7f00e000 80400744 b8d46000 80b21634 80b21634 [ 13.387809][ T415] 7d20: 80b2169c 80400614 80b21634 80400718 7f00e000 00000000 b8d47d7c 80400744 [ 13.396689][ T415] 7d40: b8d46000 80b21634 80b21634 803fe338 b898f254 b80fe76c b8d32e38 990a3ad4 [ 13.405569][ T415] 7d60: fffffff3 b898f210 b8d46000 00000001 b898f254 803ffe7c 80857a90 b898f210 [ 13.414449][ T415] 7d80: 00000001 990a3ad4 b8d46000 b898f210 b898f210 80b17aec b8a29c20 803ff0a4 [ 13.423328][ T415] 7da0: b898f210 00000000 b8d46000 803fb8e0 b898f200 00000000 80b17aec b898f210 [ 13.432209][ T415] 7dc0: b8a29c20 990a3ad4 b895b900 b898f200 8050fb7c 80b17aec b898f210 b8a29c20 [ 13.441088][ T415] 7de0: b8a29800 b895b900 b8a29a04 803c5ec0 b8a29c00 b898f200 b8a29a20 00000007 [ 13.449968][ T415] 7e00: b8a29c20 8050fd78 b8a29800 00000000 b8a29a20 b8a29c04 b8a29820 b8a299d0 [ 13.458848][ T415] 7e20: b895b900 8050e5a4 b8a29800 b8a299d8 b8d46000 b8a299e0 b8a29820 b8a299d0 [ 13.467728][ T415] 7e40: b895b900 8050e008 000041ed 00000000 b8b8c440 b8a299d8 b8a299e0 b8a299d8 [ 13.476608][ T415] 7e60: b8b8c440 990a3ad4 00000000 b8a29820 b8b8c400 00000006 b8a29800 b895b880 [ 13.485487][ T415] 7e80: b8d47f78 00000000 00000000 8050f4b4 00000006 b895b890 b8b8c400 008fbea0 [ 13.494367][ T415] 7ea0: b895b880 8029f530 00000000 00000000 b8d46000 00000006 b8d46000 008fbea0 [ 13.503246][ T415] 7ec0: 8029f434 00000000 b8d46000 00000000 00000000 8021e2e4 0000000a 8061fd0c [ 13.512125][ T415] 7ee0: 0000000a b8af0c00 0000000a b8af0c40 00000001 b8af0c40 00000000 8061f910 [ 13.521005][ T415] 7f00: 0000000a 80240af4 00000002 b8d46000 00000000 8061fd0c 00000002 80232d7c [ 13.529884][ T415] 7f20: 00000000 b8d46000 00000000 990a3ad4 00000000 00000006 b8a62d80 008fbea0 [ 13.538764][ T415] 7f40: b8d47f78 00000000 b8d46000 00000000 00000000 802210c0 b88f2900 00000000 [ 13.547644][ T415] 7f60: b8a62d80 b8a62d80 b8d46000 00000006 008fbea0 80221320 00000000 00000000 [ 13.556524][ T415] 7f80: b8af0c00 990a3ad4 0000006c 008fbea0 76f1cda0 00000004 80101204 00000004 [ 13.565403][ T415] 7fa0: 00000000 80101000 0000006c 008fbea0 00000001 008fbea0 00000006 00000000 [ 13.574283][ T415] 7fc0: 0000006c 008fbea0 76f1cda0 00000004 00000006 00000006 00000000 00000000 [ 13.583162][ T415] 7fe0: 00000004 7ebaf7d0 76eb4c0b 76e3f206 600d0030 00000001 00000000 00000000 [ 13.592056][ T415] [<8050f6b0>] (rproc_virtio_notify) from [<803c6430>] (virtqueue_notify+0x1c/0x34) [ 13.601298][ T415] [<803c6430>] (virtqueue_notify) from [<7f00ae18>] (rpmsg_probe+0x280/0x380 [virtio_rpmsg_bus]) [ 13.611663][ T415] [<7f00ae18>] (rpmsg_probe [virtio_rpmsg_bus]) from [<803c62e0>] (virtio_dev_probe+0x1f8/0x2c4) [ 13.622022][ T415] [<803c62e0>] (virtio_dev_probe) from [<80400114>] (really_probe+0x200/0x450) [ 13.630817][ T415] [<80400114>] (really_probe) from [<80400614>] (driver_probe_device+0x16c/0x1ac) [ 13.639873][ T415] [<80400614>] (driver_probe_device) from [<803fe338>] (bus_for_each_drv+0x84/0xc8) [ 13.649102][ T415] [<803fe338>] (bus_for_each_drv) from [<803ffe7c>] (__device_attach+0xd4/0x164) [ 13.658069][ T415] [<803ffe7c>] (__device_attach) from [<803ff0a4>] (bus_probe_device+0x84/0x8c) [ 13.666950][ T415] [<803ff0a4>] (bus_probe_device) from [<803fb8e0>] (device_add+0x444/0x768) [ 13.675572][ T415] [<803fb8e0>] (device_add) from [<803c5ec0>] (register_virtio_device+0xa4/0xfc) [ 13.684541][ T415] [<803c5ec0>] (register_virtio_device) from [<8050fd78>] (rproc_add_virtio_dev+0xcc/0x1b8) [ 13.694466][ T415] [<8050fd78>] (rproc_add_virtio_dev) from [<8050e5a4>] (rproc_start+0x148/0x200) [ 13.703521][ T415] [<8050e5a4>] (rproc_start) from [<8050e008>] (rproc_boot+0x384/0x5c0) [ 13.711708][ T415] [<8050e008>] (rproc_boot) from [<8050f4b4>] (state_store+0x3c/0xc8) [ 13.719723][ T415] [<8050f4b4>] (state_store) from [<8029f530>] (kernfs_fop_write+0xfc/0x214) [ 13.728348][ T415] [<8029f530>] (kernfs_fop_write) from [<8021e2e4>] (__vfs_write+0x30/0x1cc) [ 13.736971][ T415] [<8021e2e4>] (__vfs_write) from [<802210c0>] (vfs_write+0xac/0x17c) [ 13.744985][ T415] [<802210c0>] (vfs_write) from [<80221320>] (ksys_write+0x64/0xe4) [ 13.752825][ T415] [<80221320>] (ksys_write) from [<80101000>] (ret_fast_syscall+0x0/0x54) [ 13.761178][ T415] Exception stack(0xb8d47fa8 to 0xb8d47ff0) [ 13.766932][ T415] 7fa0: 0000006c 008fbea0 00000001 008fbea0 00000006 00000000 [ 13.775811][ T415] 7fc0: 0000006c 008fbea0 76f1cda0 00000004 00000006 00000006 00000000 00000000 [ 13.784687][ T415] 7fe0: 00000004 7ebaf7d0 76eb4c0b 76e3f206 [ 13.790442][ T415] Code: bad PC value [ 13.839214][ T415] ---[ end trace 1fe21ecfc9f28852 ]--- Reviewed-by:
Nikita Shubin <NShubin@topcon.com> Fixes: 7a186941 ("remoteproc: remove the single rpmsg vdev limitation") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200306072452.24743-1-NShubin@topcon.comSigned-off-by:
-
Alex Elder authored
If the value written to the "recovery" debugfs file is not one of the recognized commands return an error to indicate it's invalid. Signed-off-by:
Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20200228183359.16229-5-elder@linaro.orgSigned-off-by:
-
Alex Elder authored
Don't bother checking the remoteproc state before calling rproc_trigger_recovery() because that function will verify the state, and the state can only be safely checked while holding the mutex anyway. Make the mode for "recovery" be writable. Signed-off-by:
-
Alex Elder authored
Two places call rproc_trigger_recovery(): - rproc_crash_handler_work() sets rproc->state to CRASHED under protection of the mutex, then calls it if recovery is not disabled. This function is called in workqueue context when scheduled in rproc_report_crash(). - rproc_recovery_write() calls it in two spots, both of which the only call it if the rproc->state is CRASHED. The mutex is taken right away in rproc_trigger_recovery(). However, by the time the mutex is acquired, something else might have changed rproc->state to something other than CRASHED. The work that follows that is only appropriate for a remoteproc in CRASHED state. So check the state after acquiring the mutex, and only proceed with the recovery work if the remoteproc is still in CRASHED state. Delay reporting that recovering has begun until after we hold the mutex and we know the remote processor is in CRASHED state. Signed-off-by: -
Ahmad Fatoum authored
The mainline device trees lack the "st,syscfg-pdds", so probing the driver always throws the warning. As the property is optional per binding and the driver can deal with its absence, demote the warning to info log level. Signed-off-by:
Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.kernel.org/r/20200224172519.15315-1-a.fatoum@pengutronix.deSigned-off-by:
-
Nathan Chancellor authored
Clang errors: drivers/remoteproc/mtk_scp.c:364:14: error: incompatible function pointer types initializing 'void *(*)(struct rproc *, u64, size_t)' (aka 'void *(*)(struct rproc *, unsigned long long, unsigned int)') with an expression of type 'void *(struct rproc *, u64, int)' (aka 'void *(struct rproc *, unsigned long long, int)') [-Werror,-Wincompatible-function-pointer-types] .da_to_va = scp_da_to_va, ^~~~~~~~~~~~ 1 error generated. Make the same change as commit 0fcbb369f052 ("remoteproc: Use size_t type for len in da_to_va"), which was not updated for the acceptance of commit 63c13d61 ("remoteproc/mediatek: add SCP support for mt8183"). Fixes: 0fcbb369f052 ("remoteproc: Use size_t type for len in da_to_va") Link: https://github.com/ClangBuiltLinux/linux/issues/927Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Link: https://lore.kernel.org/r/20200310211514.32288-1-natechancellor@gmail.comSigned-off-by:
-
Clement Leger authored
Now that remoteproc can load an elf64, coredump elf class should be the same as the loaded elf class. In order to do that, add a elf_class field to rproc with default values. If an elf is loaded successfully, this field will be updated with the loaded elf class. Then, the coredump core code has been modified to use the generic elf macro in order to create an elf file with correct class. Reviewed-by:
Clement Leger <cleger@kalray.eu> Link: https://lore.kernel.org/r/20200302093902.27849-9-cleger@kalray.euSigned-off-by:
-
Clement Leger authored
Now that rproc_elf_sanity_check can be used by external drivers, allow to only overwrite the sanity_check member of rproc_ops. This will allow drivers to handle elf32 and elf64 by overwriting sanity_check with rproc_elf_sanity_check function. Signed-off-by:
-
Clement Leger authored
In order to support elf64, use macros from remoteproc_elf_helpers.h to access elf headers depending on elf class. To allow new drivers to support elf64, add rproc_elf_sanity_check function which make more sense than adding a elf64 named one since it will support both elf versions. Driver which need to support both elf32/elf64 should use this new function for elf sanity check instead of the elf32 one. Signed-off-by:
Arnaud POULIQUEN <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20200302093902.27849-7-cleger@kalray.euSigned-off-by:
-
Clement Leger authored
Since this function will be modified to support both elf32 and elf64, rename the existing one to elf32 (which is the only supported format at the moment). This will allow not to introduce possible side effect when adding elf64 support (ie: all backends will still support only elf32 if not requested explicitely using rproc_elf_sanity_check). Signed-off-by:
-
Clement Leger authored
elf32 and elf64 mainly differ by their types. In order to avoid copy/pasting the whole loader code, generate static inline functions which will access values according to the elf class. It allows to keep a common loader basis. In order to accommodate both elf types sizes, the maximum size for a elf header member is chosen using the maximum value of the field for both elf class. Reviewed-by:
-
Clement Leger authored
elf64 entry is defined as a u64. Since boot_addr is used to store the elf entry point, change boot_addr type to u64 to support both elf32 and elf64. In the same time, fix users that were using this variable. Reviewed-by:
-
Clement Leger authored
Now that rproc_da_to_va uses a size_t for length, use a size_t for len field of rproc_mem_entry. Function used to create such structures now takes a size_t instead of int to allow full size range to be handled. Reviewed-by:
-
Clement Leger authored
With upcoming changes in elf loader for elf64 support, section size will be a u64. When used with da_to_va, this will potentially lead to overflow if using the current "int" type for len argument. Change da_to_va prototype to use a size_t for len and fix all users of this function. Reviewed-by:
-
Arnaud Pouliquen authored
Fix the following warnings when documentation is built: drivers/remoteproc/remoteproc_virtio.c:330: warning: Function parameter or member 'id' not described in 'rproc_add_virtio_dev' drivers/remoteproc/remoteproc_core.c:243: warning: Function parameter or member 'name' not described in 'rproc_find_carveout_by_name' drivers/remoteproc/remoteproc_core.c:473: warning: Function parameter or member 'offset' not described in 'rproc_handle_vdev' drivers/remoteproc/remoteproc_core.c:604: warning: Function parameter or member 'offset' not described in 'rproc_handle_trace' drivers/remoteproc/remoteproc_core.c:678: warning: Function parameter or member 'offset' not described in 'rproc_handle_devmem' drivers/remoteproc/remoteproc_core.c:873: warning: Function parameter or member 'offset' not described in 'rproc_handle_carveout' drivers/remoteproc/remoteproc_core.c:1029: warning: cannot understand function prototype: 'rproc_handle_resource_t rproc_loading_handlers[RSC_LAST] = ' drivers/remoteproc/remoteproc_core.c:1693: warning: Function parameter or member 'work' not described in 'rproc_crash_handler_work' Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Sibi Sankar authored
On secure devices after a wdog/fatal interrupt, the mba region has to be refreshed in order to prevent the following errors during mba load. Err Logs: remoteproc remoteproc2: stopped remote processor 4080000.remoteproc qcom-q6v5-mss 4080000.remoteproc: PBL returned unexpected status -284031232 qcom-q6v5-mss 4080000.remoteproc: PBL returned unexpected status -284031232 .... qcom-q6v5-mss 4080000.remoteproc: PBL returned unexpected status -284031232 qcom-q6v5-mss 4080000.remoteproc: MBA booted, loading mpss Fixes: 7dd8ade2 ("remoteproc: qcom: q6v5-mss: Add custom dump function for modem") Cc: stable@vger.kernel.org Signed-off-by:
Sibi Sankar <sibis@codeaurora.org> Tested-by:
-
Bjorn Andersson authored
The code used to sync with the MBA after each segment loaded and this is still what's done downstream. So reduce the delta towards downstream by switching to a model where the content is iteratively validated. Signed-off-by:
-
Bjorn Andersson authored
Trying to reclaim mpss memory while the mba is not running causes the system to crash on devices with security fuses blown, so leave it assigned to the remote on shutdown and recover it on a subsequent boot. Fixes: 6c5a9dc2 ("remoteproc: qcom: Make secure world call for mem ownership switch") Cc: stable@vger.kernel.org Signed-off-by:
-
- 10 Feb, 2020 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - fix randconfig to generate a sane .config - rename hostprogs-y / always to hostprogs / always-y, which are more natual syntax. - optimize scripts/kallsyms - fix yes2modconfig and mod2yesconfig - make multiple directory targets ('make foo/ bar/') work * tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: make multiple directory targets work kconfig: Invalidate all symbols after changing to y or m. kallsyms: fix type of kallsyms_token_table[] scripts/kallsyms: change table to store (strcut sym_entry *) scripts/kallsyms: rename local variables in read_symbol() kbuild: rename hostprogs-y/always to hostprogs/always-y kbuild: fix the document to use extra-y for vmlinux.lds kconfig: fix broken dependency in randconfig-generated .config
-
- 09 Feb, 2020 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefsLinus Torvalds authored
Pull new zonefs file system from Damien Le Moal: "Zonefs is a very simple file system exposing each zone of a zoned block device as a file. Unlike a regular file system with native zoned block device support (e.g. f2fs or the on-going btrfs effort), zonefs does not hide the sequential write constraint of zoned block devices to the user. As a result, zonefs is not a POSIX compliant file system. Its goal is to simplify the implementation of zoned block devices support in applications by replacing raw block device file accesses with a richer file based API, avoiding relying on direct block device file ioctls which may be more obscure to developers. One example of this approach is the implementation of LSM (log-structured merge) tree structures (such as used in RocksDB and LevelDB) on zoned block devices by allowing SSTables to be stored in a zone file similarly to a regular file system rather than as a range of sectors of a zoned device. The introduction of the higher level construct "one file is one zone" can help reducing the amount of changes needed in the application while at the same time allowing the use of zoned block devices with various programming languages other than C. Zonefs IO management implementation uses the new iomap generic code. Zonefs has been successfully tested using a functional test suite (available with zonefs userland format tool on github) and a prototype implementation of LevelDB on top of zonefs" * tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: Add documentation fs: New zonefs file system
-
Marc Zyngier authored
In order to allow the GICv4 code to link properly on 32bit ARM, make sure we don't use 64bit divisions when it isn't strictly necessary. Fixes: 4e6437f1 ("irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "13 cifs/smb3 patches, most from testing at the SMB3 plugfest this week: - Important fix for multichannel and for modefromsid mounts. - Two reconnect fixes - Addition of SMB3 change notify support - Backup tools fix - A few additional minor debug improvements (tracepoints and additional logging found useful during testing this week)" * tag '5.6-rc-smb3-plugfest-patches' of git://git.samba.org/sfrench/cifs-2.6: smb3: Add defines for new information level, FileIdInformation smb3: print warning once if posix context returned on open smb3: add one more dynamic tracepoint missing from strict fsync path cifs: fix mode bits from dir listing when mounted with modefromsid cifs: fix channel signing cifs: add SMB3 change notification support cifs: make multichannel warning more visible cifs: fix soft mounts hanging in the reconnect code cifs: Add tracepoints for errors on flush or fsync cifs: log warning message (once) if out of disk space cifs: fail i/o on soft mounts if sessionsetup errors out smb3: fix problem with null cifs super block with previous patch SMB3: Backup intent flag missing from some more ops -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vboxfs from Al Viro: "This is the VirtualBox guest shared folder support by Hans de Goede, with fixups for fs_parse folded in to avoid bisection hazards from those API changes..." * 'work.vboxsf' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Add VirtualBox guest shared folder (vboxsf) support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of fixes for X86: - Ensure that the PIT is set up when the local APIC is disable or configured in legacy mode. This is caused by an ordering issue introduced in the recent changes which skip PIT initialization when the TSC and APIC frequencies are already known. - Handle malformed SRAT tables during early ACPI parsing which caused an infinite loop anda boot hang. - Fix a long standing race in the affinity setting code which affects PCI devices with non-maskable MSI interrupts. The problem is caused by the non-atomic writes of the MSI address (destination APIC id) and data (vector) fields which the device uses to construct the MSI message. The non-atomic writes are mandated by PCI. If both fields change and the device raises an interrupt after writing address and before writing data, then the MSI block constructs a inconsistent message which causes interrupts to be lost and subsequent malfunction of the device. The fix is to redirect the interrupt to the new vector on the current CPU first and then switch it over to the new target CPU. This allows to observe an eventually raised interrupt in the transitional stage (old CPU, new vector) to be observed in the APIC IRR and retriggered on the new target CPU and the new vector. The potential spurious interrupts caused by this are harmless and can in the worst case expose a buggy driver (all handlers have to be able to deal with spurious interrupts as they can and do happen for various reasons). - Add the missing suspend/resume mechanism for the HYPERV hypercall page which prevents resume hibernation on HYPERV guests. This change got lost before the merge window. - Mask the IOAPIC before disabling the local APIC to prevent potentially stale IOAPIC remote IRR bits which cause stale interrupt lines after resume" * tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Mask IOAPIC entries when disabling the local APIC x86/hyperv: Suspend/resume the hypercall page for hibernation x86/apic/msi: Plug non-maskable MSI affinity race x86/boot: Handle malformed SRAT tables during early ACPI parsing x86/timer: Don't skip PIT setup when APIC is disabled or in legacy mode -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull SMP fixes from Thomas Gleixner: "Two fixes for the SMP related functionality: - Make the UP version of smp_call_function_single() match SMP semantics when called for a not available CPU. Instead of emitting a warning and assuming that the function call target is CPU0, return a proper error code like the SMP version does. - Remove a superfluous check in smp_call_function_many_cond()" * tag 'smp-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smp/up: Make smp_call_function_single() match SMP semantics smp: Remove superfluous cond_func check in smp_call_function_many_cond()
-
