- 03 Feb, 2015 6 commits
-
-
David Sterba authored
Verify that the sys_array has enough bytes to read the next item. Signed-off-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Chris Mason <clm@fb.com>
-
David Sterba authored
There's a pointer to buffer, integer offset and offset passed as pointer, try to find matching names for them. Signed-off-by:
-
David Sterba authored
Verify that possible minimum and maximum size is set, validity of contents is checked in btrfs_read_sys_array. Signed-off-by:
-
David Sterba authored
I received a few crafted images from Jiri, all got through the recently added superblock checks. The lower bounds checks for num_devices and sector/node -sizes were missing and caused a crash during mount. Tools for symbolic code execution were used to prepare the images contents. Reported-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
chandan r authored
This patch adds a new member to the 'struct btrfs_inode' structure to hold the file creation time. Signed-off-by:
chandan <chandanrmail@gmail.com> [refreshed, removed btrfs_inode_otime] Signed-off-by:
-
David Sterba authored
They just opencode taking address of the timespec member. Signed-off-by:
-
- 22 Jan, 2015 34 commits
-
-
chandan authored
btrfs_alloc_tree_block() returns an extent buffer on which a blocked lock has been taken. Hence assign the appropriate value to path->locks[level]. Signed-off-by:
Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by:
-
Anand Jain authored
There isn't any real use of following members of struct btrfs_root so delete them. struct kobject root_kobj; struct completion kobj_unregister; Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Yang Dongsheng authored
In function qgroup_excl_accounting(), we need to WARN when qg->excl is less than what we want to free, same to child and parents. But currently, for parent qgroup, the WARN_ON() is located after freeing qg->excl. It will WARN out even we free it normally. This patch move this WARN_ON() before freeing qg->excl. Signed-off-by:
Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Reviewed-by:
Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by:
-
Liu Bo authored
"run_most" is not used anymore. Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Reviewed-by:
-
Zhao Lei authored
refs is better than ref_count to record a struct's ref count. Signed-off-by:
Zhao Lei <zhaolei@cn.fujitsu.com> Suggested-by:
-
Zhao Lei authored
So we can check raid56 with: (map->type & BTRFS_BLOCK_GROUP_RAID56_MASK) instead of long: (map->type & (BTRFS_BLOCK_GROUP_RAID5 | BTRFS_BLOCK_GROUP_RAID6)) Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
-
Zhao Lei authored
Corrent code use many kinds of "clever" way to determine operation target's raid type, as: raid_map != NULL or raid_map[MAX_NR] == RAID[56]_Q_STRIPE To make code easy to maintenance, this patch put raid type into bbio, and we can always get raid type from bbio with a "stupid" way. Signed-off-by:
-
Zhao Lei authored
scrub_setup_recheck_block() have many arguments but most of them can be get from one of them, we can remove them to make code clean. Some other cleanup for that function also included in this patch. Signed-off-by:
-
Zhao Lei authored
The code are similar, combine them to make code clean and easy to maintenance. Some lost condition are also completed with benefit of this combination. Signed-off-by:
-
Zhao Lei authored
Btrfs: Separate finding-right-mirror and writing-to-target's process in scrub_handle_errored_block() In corrent code, code of finding-right-mirror and writing-to-target are mixed in logic, if we find a right mirror but failed in writing to target, it will treat as "hadn't found right block", and fill the target with sblock_bad. Actually, "failed in writing to target" does not mean "source block is wrong", this patch separate above two condition in logic, and do some cleanup to make code clean. Signed-off-by:
-
Zhao Lei authored
Use break instead of useless loop should be more suitable in this case. Signed-off-by:
-
Zhao Lei authored
Signed-off-by:
-
Zhao Lei authored
1: Remove no-need DEFINE_WAIT(wait) 2: Add likely() for BTRFS_FS_STATE_DEV_REPLACING condition 3: Use while loop instead of goto Signed-off-by:
-
Zhao Lei authored
It is always 1 in this place, because !1 case was already jumped out in previous code. Signed-off-by:
-
Zhao Lei authored
if (sctx->is_dev_replace && !is_metadata && !have_csum) { ... goto nodatasum_case; } ... nodatasum_case: WARN_ON(sctx->is_dev_replace); In above code, nodatasum_case marker should be moved after WARN_ON(). Signed-off-by: -
Zhao Lei authored
1: ref_count is simple than current RBIO_HOLD_BBIO_MAP_BIT flag to keep btrfs_bio's memory in raid56 recovery implement. 2: free function for bbio will make code clean and flexible, plus forced data type checking in compile. Changelog v1->v2: Rename following by David Sterba's suggestion: put_btrfs_bio() -> btrfs_put_bio() get_btrfs_bio() -> btrfs_get_bio() bbio->ref_count -> bbio->refs Signed-off-by:
-
Zhao Lei authored
It can make code more simple and clear, we need not care about free bbio and raid_map together. Signed-off-by:
-
Zhao Lei authored
It can avoid complex calculation of real stripes in sort, moreover, we can clean up code of sorting tgtdev_map because it will be in order initially. Signed-off-by:
-
Zhao Lei authored
We add the number of stripes on target devices into bbio->num_stripes if we are under device replacement, and we just sort the raid_map of those stripes that not on the target devices, so if when we need real raid_map, we need skip the stripes on the target devices. Signed-off-by:
-
Filipe Manana authored
If we have an inode with a large number of hard links, some of which may be extrefs, turn a regular ref into an extref, fsync the inode and then replay the fsync log (after a crash/reboot), we can endup with an fsync log that makes the replay code always fail with -EOVERFLOW when processing the inode's references. This is easy to reproduce with the test case I made for xfstests. Its steps are the following: _scratch_mkfs "-O extref" >> $seqres.full 2>&1 _init_flakey _mount_flakey # Create a test file with 3001 hard links. This number is large enough to # make btrfs start using extrefs at some point even if the fs has the maximum # possible leaf/node size (64Kb). echo "hello world" > $SCRATCH_MNT/foo for i in `seq 1 3000`; do ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_`printf "%04d" $i` done # Make sure all metadata and data are durably persisted. sync # Now remove one link, add a new one with a new name, add another new one with # the same name as the one we just removed and fsync the inode. rm -f $SCRATCH_MNT/foo_link_0001 ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_3001 ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_0001 rm -f $SCRATCH_MNT/foo_link_0002 ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_3002 ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_3003 $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo # Simulate a crash/power loss. This makes sure the next mount # will see an fsync log and will replay that log. _load_flakey_table $FLAKEY_DROP_WRITES _unmount_flakey _load_flakey_table $FLAKEY_ALLOW_WRITES _mount_flakey # Check that the number of hard links is correct, we are able to remove all # the hard links and read the file's data. This is just to verify we don't # get stale file handle errors (due to dangling directory index entries that # point to inodes that no longer exist). echo "Link count: $(stat --format=%h $SCRATCH_MNT/foo)" [ -f $SCRATCH_MNT/foo ] || echo "Link foo is missing" for ((i = 1; i <= 3003; i++)); do name=foo_link_`printf "%04d" $i` if [ $i -eq 2 ]; then [ -f $SCRATCH_MNT/$name ] && echo "Link $name found" else [ -f $SCRATCH_MNT/$name ] || echo "Link $name is missing" fi done rm -f $SCRATCH_MNT/foo_link_* cat $SCRATCH_MNT/foo rm -f $SCRATCH_MNT/foo status=0 exit The fix is simply to correct the overflow condition when overwriting a reference item because it was wrong, trying to increase the item in the fs/subvol tree by an impossible amount. Also ensure that we don't insert one normal ref and one ext ref for the same dentry - this happened because processing a dir index entry from the parent in the log happened when the normal ref item was full, which made the logic insert an extref and later when the normal ref had enough room, it would be inserted again when processing the ref item from the child inode in the log. This issue has been present since the introduction of the extrefs feature (2012). A test case for xfstests follows soon. This test only passes if the previous patch titled "Btrfs: fix fsync when extend references are added to an inode" is applied too. Signed-off-by:Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
Filipe Manana authored
If we added an extended reference to an inode and fsync'ed it, the log replay code would make our inode have an incorrect link count, which was lower then the expected/correct count. This resulted in stale directory index entries after deleting some of the hard links, and any access to the dangling directory entries resulted in -ESTALE errors because the entries pointed to inode items that don't exist anymore. This is easy to reproduce with the test case I made for xfstests, and the bulk of that test is: _scratch_mkfs "-O extref" >> $seqres.full 2>&1 _init_flakey _mount_flakey # Create a test file with 3001 hard links. This number is large enough to # make btrfs start using extrefs at some point even if the fs has the maximum # possible leaf/node size (64Kb). echo "hello world" > $SCRATCH_MNT/foo for i in `seq 1 3000`; do ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_`printf "%04d" $i` done # Make sure all metadata and data are durably persisted. sync # Add one more link to the inode that ends up being a btrfs extref and fsync # the inode. ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link_3001 $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo # Simulate a crash/power loss. This makes sure the next mount # will see an fsync log and will replay that log. _load_flakey_table $FLAKEY_DROP_WRITES _unmount_flakey _load_flakey_table $FLAKEY_ALLOW_WRITES _mount_flakey # Now after the fsync log replay btrfs left our inode with a wrong link count N, # which was smaller than the correct link count M (N < M). # So after removing N hard links, the remaining M - N directory entries were # still visible to user space but it was impossible to do anything with them # because they pointed to an inode that didn't exist anymore. This resulted in # stale file handle errors (-ESTALE) when accessing those dentries for example. # # So remove all hard links except the first one and then attempt to read the # file, to verify we don't get an -ESTALE error when accessing the inodel # # The btrfs fsck tool also detected the incorrect inode link count and it # reported an error message like the following: # # root 5 inode 257 errors 2001, no inode item, link count wrong # unresolved ref dir 256 index 2978 namelen 13 name foo_link_2976 filetype 1 errors 4, no inode ref # # The fstests framework automatically calls fsck after a test is run, so we # don't need to call fsck explicitly here. rm -f $SCRATCH_MNT/foo_link_* cat $SCRATCH_MNT/foo status=0 exit So make sure an fsync always flushes the delayed inode item, so that the fsync log contains it (needed in order to trigger the link count fixup code) and fix the extref counting function, which always return -ENOENT to its caller (and made it assume there were always 0 extrefs). This issue has been present since the introduction of the extrefs feature (2012). A test case for xfstests follows soon. Signed-off-by: -
Filipe Manana authored
If we have an inode (file) with a link count greater than 1, remove one of its hard links, fsync the inode, power fail/crash and then replay the fsync log on the next mount, we end up getting the parent directory's metadata inconsistent - its i_size still reflects the deleted hard link and has dangling index entries (with no matching inode reference entries). This prevents the directory from ever being deletable, as its i_size can never decrease to BTRFS_EMPTY_DIR_SIZE even if all of its children inodes are deleted, and the dangling index entries can never be removed (as they point to an inode that does not exist anymore). This is easy to reproduce with the following excerpt from the test case for xfstests that I just made: _scratch_mkfs >> $seqres.full 2>&1 _init_flakey _mount_flakey # Create a test file with 2 hard links in the same directory. mkdir -p $SCRATCH_MNT/a/b echo "hello world" > $SCRATCH_MNT/a/b/foo ln $SCRATCH_MNT/a/b/foo $SCRATCH_MNT/a/b/bar # Make sure all metadata and data are durably persisted. sync # Now remove one of the hard links and fsync the inode. rm -f $SCRATCH_MNT/a/b/bar $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/a/b/foo # Simulate a crash/power loss. This makes sure the next mount # will see an fsync log and will replay that log. _load_flakey_table $FLAKEY_DROP_WRITES _unmount_flakey _load_flakey_table $FLAKEY_ALLOW_WRITES _mount_flakey # Remove the last hard link of the file and attempt to remove its parent # directory - this failed in btrfs because the fsync log and replay code # didn't decrement the parent directory's i_size and left dangling directory # index entries - this made the btrfs rmdir implementation always fail with # the error -ENOTEMPTY. # # The dangling directory index entries were visible to user space, but it was # impossible to do anything on them (unlink, open, read, write, stat, etc) # because the inode they pointed to did not exist anymore. # # The parent directory's metadata inconsistency (stale index entries) was # also detected by btrfs' fsck tool, which is run automatically by the fstests # framework when the test finishes. The error message reported by fsck was: # # root 5 inode 259 errors 2001, no inode item, link count wrong # unresolved ref dir 258 index 3 namelen 3 name bar filetype 1 errors 4, no inode ref # rm -f $SCRATCH_MNT/a/b/* rmdir $SCRATCH_MNT/a/b rmdir $SCRATCH_MNT/a To fix this just make sure that after an unlink, if the inode is fsync'ed, he parent inode is fully logged in the fsync log. A test case for xfstests follows soon. Signed-off-by: -
Filipe Manana authored
Very often our extent buffer's header generation doesn't match the current transaction's id or it is also referenced by other trees (snapshots), so we don't need the corresponding block group cache object. Therefore only search for it if we are going to use it, so we avoid an unnecessary search in the block groups rbtree (and acquiring and releasing its spinlock). Freeing a tree block is performed when COWing or deleting a node/leaf, which implies we are holding the node/leaf's parent node lock, therefore reducing the amount of time spent when freeing a tree block helps reducing the amount of time we are holding the parent node's lock. For example, for a run of xfstests/generic/083, the block group cache object was needed only 682 times for a total of 226691 calls to free a tree block. Signed-off-by:
-
David Sterba authored
Signed-off-by:
-
David Sterba authored
Currently there's a 4B hole in the structure between refs and state and there are only 16 bits used so we can make it unsigned. This will get a better packing and may save some stack space for local variables. The size of extent_state gets reduced by 8B and there are usually a lot of slab objects. struct extent_state { u64 start; /* 0 8 */ u64 end; /* 8 8 */ struct rb_node rb_node; /* 16 24 */ wait_queue_head_t wq; /* 40 24 */ /* --- cacheline 1 boundary (64 bytes) --- */ atomic_t refs; /* 64 4 */ /* XXX 4 bytes hole, try to pack */ long unsigned int state; /* 72 8 */ u64 private; /* 80 8 */ /* size: 88, cachelines: 2, members: 7 */ /* sum members: 84, holes: 1, sum holes: 4 */ /* last cacheline: 24 bytes */ }; Signed-off-by: -
David Sterba authored
This has been confusing people for too long, the message is really just informative. CC: <stable@vger.kernel.org> # 3.10+ Signed-off-by:
-
David Sterba authored
The errors are worth noting and might get missed with INFO level. Signed-off-by:
-
David Sterba authored
All error conditions from open_ctree shall be ERR. Warning would suggest that something's wrong and we can continue. Signed-off-by:
-
David Sterba authored
Several messages that point to some internal problem, level INFO is wrong here. Signed-off-by:
-
Filipe Manana authored
We were incorrectly detecting when the target key didn't exist anymore after releasing the path and re-searching the tree. This could make us split or duplicate (btrfs_split_item() and btrfs_duplicate_item() are its only callers at the moment) an item when we should not. For the case of duplicating an item, we currently only duplicate checksum items (csum tree) and file extent items (fs/subvol trees). For the checksum items we end up overriding the item completely, but for file extent items we update only some of their fields in the copy (done in __btrfs_drop_extents), which means we can end up having a logical corruption for some values. Also for the case where we duplicate a file extent item it will make us produce a leaf with a wrong key order, as btrfs_duplicate_item() advances us to the next slot and then its caller sets a smaller key on the new item at that slot (like in __btrfs_drop_extents() e.g.). Alternatively if the tree search in setup_leaf_for_split() leaves with path->slots[0] == btrfs_header_nritems(path->nodes[0]), we end up accessing beyond the leaf's end (when we check if the item's size has changed) and make our caller insert an item at the invalid slot btrfs_header_nritems(path->nodes[0]) + 1, causing an invalid memory access if the leaf is full or nearly full. This issue has been present since the introduction of this function in 2009: Btrfs: Add btrfs_duplicate_item commit ad48fd75Signed-off-by: -
Chris Mason authored
Merge branch 'cleanup/blocksize-diet-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus
-
Chris Mason authored
Merge branch 'fix/find-item-path-leak' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus
-
Josef Bacik authored
Currently any time we try to update the block groups on disk we will walk _all_ block groups and check for the ->dirty flag to see if it is set. This function can get called several times during a commit. So if you have several terabytes of data you will be a very sad panda as we will loop through _all_ of the block groups several times, which makes the commit take a while which slows down the rest of the file system operations. This patch introduces a dirty list for the block groups that we get added to when we dirty the block group for the first time. Then we simply update any block groups that have been dirtied since the last time we called btrfs_write_dirty_block_groups. This allows us to clean up how we write the free space cache out so it is much cleaner. Thanks, Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
-
Josef Bacik authored
I've been overloading root->dirty_list to keep track of dirty roots and which roots need to have their commit roots switched at transaction commit time. This could cause us to lose an update to the root which could corrupt the file system. To fix this use a state bit to know if the root is dirty, and if it isn't set we go ahead and move the root to the dirty list. This way if we re-dirty the root after adding it to the switch_commit list we make sure to update it. This also makes it so that the extent root is always the last root on the dirty list to try and keep the amount of churn down at this point in the commit. Thanks, Signed-off-by:
-
