- 21 Sep, 2017 11 commits
-
-
Nisar Sayed authored
Use default value of auto duplex and auto speed values loaded from EEPROM/OTP after reset. The LAN78xx allows platform configurations to be loaded from EEPROM/OTP. Ex: When external phy is connected, the MAC can be configured to have correct auto speed, auto duplex, auto polarity configured from the EEPROM/OTP. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by:
Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nisar Sayed authored
Allow EEPROM write for less than MAX_EEPROM_SIZE Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by:
-
Nisar Sayed authored
Fix for eeprom read/write when device auto suspend Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: Bring back transceiver type for PHYLIB With the introduction of the xLINKSETTINGS ethtool APIs, the transceiver type was deprecated, but in that process we lost some useful information that PHYLIB was consistently reporting about internal vs. external PHYs. This brings back transceiver as a read-only field that is only consumed in the legacy path where ETHTOOL_GET is called but the underlying drivers implement the new style klink_settings API. ==================== Signed-off-by: -
Florian Fainelli authored
With commit 2d55173e ("phy: add generic function to support ksetting support"), we lost the ability to report the transceiver type like we used to. Now that we have added back the transceiver type to ethtool_link_settings, we can report it back like we used to and have no loss of information. Fixes: 3f1ac7a7 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API") Fixes: 2d55173e ("phy: add generic function to support ksetting support") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
Commit 3f1ac7a7 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API") deprecated the ethtool_cmd::transceiver field, which was fine in premise, except that the PHY library was actually using it to report the type of transceiver: internal or external. Use the first word of the reserved field to put this __u8 transceiver field back in. It is made read-only, and we don't expect the ETHTOOL_xLINKSETTINGS API to be doing anything with this anyway, so this is mostly for the legacy path where we do: ethtool_get_settings() -> dev->ethtool_ops->get_link_ksettings() -> convert_link_ksettings_to_legacy_settings() to have no information loss compared to the legacy get_settings API. Fixes: 3f1ac7a7 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API") Signed-off-by:
-
Timur Tabi authored
The EMAC has the option of sending only a single pause frame when flow control is enabled and the RX queue is full. Although sending only one pause frame has little value, this would allow admins to enable automatic flow control without having to worry about the EMAC flooding nearby switches with pause frames if the kernel hangs. The option is enabled by using the single-pause-mode private flag. Signed-off-by:
Timur Tabi <timur@codeaurora.org> Signed-off-by:
-
Alex Ng authored
If MTU is changed the host would reject the send buffer change. This problem is result of recent change to allow changing send buffer size. Every time we change the MTU, we store the previous net_device section count before destroying the buffer, but we don’t store the previous section size. When we reinitialize the buffer, its size is calculated by multiplying the previous count and previous size. Since we continuously increase the MTU, the host returns us a decreasing count value while the section size is reinitialized to 1728 bytes every time. This eventually leads to a condition where the calculated buf_size is so small that the host rejects it. Fixes: 8b532797 ("netvsc: allow controlling send/recv buffer size") Signed-off-by:
Alex Ng <alexng@microsoft.com> Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
Cong Wang authored
Fixes: c15ab236 ("net/sched: Change cls_flower to use IDR") Cc: Chris Mi <chrism@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Konstantin Khlebnikov authored
If real-time or fair-share curves are enabled in hfsc_change_class() class isn't inserted into rb-trees yet. Thus init_ed() and init_vf() must be called in place of update_ed() and update_vf(). Remove isn't required because for now curves cannot be disabled. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
-
Konstantin Khlebnikov authored
SKB stored in qdisc->gso_skb also counted into backlog. Some qdiscs don't reset backlog to zero in ->reset(), for example sfq just dequeue and free all queued skb. Signed-off-by:
-
- 20 Sep, 2017 19 commits
-
-
David S. Miller authored
Yunsheng Lin says: ==================== TM related bugfixes for the HNS3 Ethernet Driver This patch set contains a few bugfixes related to hclge_tm module. ==================== Signed-off-by: -
Yunsheng Lin authored
Current mapping between pri and tc is one to one, so user can't map multi priorities to the same tc. This patch changes the mapping to many to one. Fixes: 84844054 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
Yunsheng Lin authored
rss_size is 1, 2, 4, 8, 16, 32, 64, 128, but acutal tc queue size can be any u16 less than 128. If tc queue size is 5, we set the rss_size to 8, indirection table will be used to limit the size of actual queue size. It may cause dropping of receiving packet in hardware if rss_size is not set correctly. For now, each TC has the same rss size. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by:
-
Yunsheng Lin authored
This patch fixes a typo error for feild, which should be field. Fixes: 84844054 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by:
-
Yunsheng Lin authored
When hdev doesn't support DCB, rx private buffer is not allocated, otherwise there is not enough buffer for rx shared buffer, causing buffer allocation process to fail. This patch fixes by checking the dcb capability in hclge_rx_buffer_calc. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by:
-
Yunsheng Lin authored
rx_priv_buf_alloc is used to tell hardware how much buffer is used for rx direction, right now only the private buffer is assigned. For ae_dev that doesn't support DCB, private rx buffer is assigned to zero, only shared rx buffer is used. So not setting the shared rx buffer cause dropping of packet in SSU. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by:
-
Yunsheng Lin authored
When rx private buffer is disabled, there may be some case that the rx private buffer is not set to zero, which may cause buffer allocation process to fail. This patch fixes this problem by setting priv->enable to 0 and priv->buf_size to zero when rx private buffer is disabled. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by:
-
Yunsheng Lin authored
When ae_dev doesn't support DCB, DEFAULT_DV must be set to a lower value, otherwise the buffer allocation process will fail. This patch fix it by setting it to 30K bytes. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by:
-
Yunsheng Lin authored
When ae_dev doesn't support DCB, rx_priv_wl_config, common_thrd_config and tm_qs_bp_cfg can't be called, otherwise cmd return fail, which causes the hclge module initialization process to fail. This patch fix it by adding a DCB capability flag to check if the ae_dev support DCB. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by:
-
Yunsheng Lin authored
This patch add the ROCE supported flag in the driver_data field of pci_device_id, delete roce_pci_tbl and change HNAE_DEV_SUPPORT_ROCE_B to HNAE3_DEV_SUPPORT_ROCE_B. This cleanup is done in order to support adding capability in pci_device_id and to fix initialization failure when cmd is not supported. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains two Netfilter fixes for your net tree, they are: 1) Fix NAt compilation with UP, from Geert Uytterhoeven. 2) Fix incorrect number of entries when dumping a set, from Vishwanath Pai. ==================== Signed-off-by: -
Meng Xu authored
In isdn_ppp_write(), the header (i.e., protobuf) of the buffer is fetched twice from userspace. The first fetch is used to peek at the protocol of the message and reset the huptimer if necessary; while the second fetch copies in the whole buffer. However, given that buf resides in userspace memory, a user process can race to change its memory content across fetches. By doing so, we can either avoid resetting the huptimer for any type of packets (by first setting proto to PPP_LCP and later change to the actual type) or force resetting the huptimer for LCP packets. This patch changes this double-fetch behavior into two single fetches decided by condition (lp->isdn_device < 0 || lp->isdn_channel <0). A more detailed discussion can be found at https://marc.info/?l=linux-kernel&m=150586376926123&w=2Signed-off-by:
Meng Xu <mengxu.gatech@gmail.com> Signed-off-by:
-
Troy Kisky authored
fec_ptp_check_pps_event will return 1 if FEC_T_TF_MASK caused an interrupt. Don't return IRQ_NONE in this case. Signed-off-by:
Troy Kisky <troy.kisky@boundarydevices.com> Acked-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Troy Kisky authored
FEC_ENET_TS_TIMER is not checked in the interrupt routine so there is no need to enable it. Signed-off-by:
-
Troy Kisky authored
Before queue 0 was always checked if any queue caused an interrupt. It is better to just mark queue 0 if queue 0 has caused an interrupt. Signed-off-by:
-
Edward Cree authored
Since XDP's view of the packet includes the MAC header, moving the start- of-packet with bpf_xdp_adjust_head needs to also update the offset of the MAC header (which is relative to skb->head, not to the skb->data that was changed). Without this, tcpdump sees packets starting from the old MAC header rather than the new one, at least in my tests on the loopback device. Fixes: b5cdae32 ("net: Generic XDP") Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Meng Xu authored
The actual length of cmsg fetched in during the second loop (i.e., kcmsg - kcmsg_base) could be different from what we get from the first loop (i.e., kcmlen). The main reason is that the two get_user() calls in the two loops (i.e., get_user(ucmlen, &ucmsg->cmsg_len) and __get_user(ucmlen, &ucmsg->cmsg_len)) could cause ucmlen to have different values even they fetch from the same userspace address, as user can race to change the memory content in &ucmsg->cmsg_len across fetches. Although in the second loop, the sanity check if ((char *)kcmsg_base + kcmlen - (char *)kcmsg < CMSG_ALIGN(tmp)) is inplace, it only ensures that the cmsg fetched in during the second loop does not exceed the length of kcmlen, but not necessarily equal to kcmlen. But indicated by the assignment kmsg->msg_controllen = kcmlen, we should enforce that. This patch adds this additional sanity check and ensures that what is recorded in kmsg->msg_controllen is the actual cmsg length. Signed-off-by:
-
Yonghong Song authored
This patch fixes a bug exhibited by the following scenario: 1. fd1 = perf_event_open with attr.config = ID1 2. attach bpf program prog1 to fd1 3. fd2 = perf_event_open with attr.config = ID1 <this will be successful> 4. user program closes fd2 and prog1 is detached from the tracepoint. 5. user program with fd1 does not work properly as tracepoint no output any more. The issue happens at step 4. Multiple perf_event_open can be called successfully, but only one bpf prog pointer in the tp_event. In the current logic, any fd release for the same tp_event will free the tp_event->prog. The fix is to free tp_event->prog only when the closing fd corresponds to the one which registered the program. Signed-off-by:Yonghong Song <yhs@fb.com> Signed-off-by:
-
Willem de Bruijn authored
Packet socket bind operations must hold the po->bind_lock. This keeps po->running consistent with whether the socket is actually on a ptype list to receive packets. fanout_add unbinds a socket and its packet_rcv/tpacket_rcv call, then binds the fanout object to receive through packet_rcv_fanout. Make it hold the po->bind_lock when testing po->running and rebinding. Else, it can race with other rebind operations, such as that in packet_set_ring from packet_rcv to tpacket_rcv. Concurrent updates can result in a socket being added to a fanout group twice, causing use-after-free KASAN bug reports, among others. Reported independently by both trinity and syzkaller. Verified that the syzkaller reproducer passes after this patch. Fixes: dc99f600 ("packet: Add fanout support.") Reported-by:
nixioaming <nixiaoming@huawei.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
- 19 Sep, 2017 10 commits
-
-
Matteo Croce authored
Currently, writing into net.ipv6.conf.all.{accept_dad,use_optimistic,optimistic_dad} has no effect. Fix handling of these flags by: - using the maximum of global and per-interface values for the accept_dad flag. That is, if at least one of the two values is non-zero, enable DAD on the interface. If at least one value is set to 2, enable DAD and disable IPv6 operation on the interface if MAC-based link-local address was found - using the logical OR of global and per-interface values for the optimistic_dad flag. If at least one of them is set to one, optimistic duplicate address detection (RFC 4429) is enabled on the interface - using the logical OR of global and per-interface values for the use_optimistic flag. If at least one of them is set to one, optimistic addresses won't be marked as deprecated during source address selection on the interface. While at it, as we're modifying the prototype for ipv6_use_optimistic_addr(), drop inline, and let the compiler decide. Fixes: 7fd2561e ("net: ipv6: Add a sysctl to make optimistic addresses useful candidates") Signed-off-by:Matteo Croce <mcroce@redhat.com> Signed-off-by:
-
Mike Manning authored
Commit f784ad3d ("ipv6: do not send RTM_DELADDR for tentative addresses") incorrectly assumes that no RTM_NEWADDR are sent for addresses in tentative state, as this does happen for the standard IPv6 use-case of DAD failure, see the call to ipv6_ifa_notify() in addconf_dad_stop(). So as a result of this change, no RTM_DELADDR is sent after DAD failure for a link-local when strict DAD (accept_dad=2) is configured, or on the next admin down in other cases. The absence of this notification breaks backwards compatibility and causes problems after DAD failure if this notification was being relied on. The solution is to allow RTM_DELADDR to still be sent after DAD failure. Fixes: f784ad3d ("ipv6: do not send RTM_DELADDR for tentative addresses") Signed-off-by:
Mike Manning <mmanning@brocade.com> Cc: Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
Daniel Borkmann authored
Commit 109980b8 ("bpf: don't select potentially stale ri->map from buggy xdp progs") passed the pointer to the prog itself to be loaded into r4 prior on bpf_redirect_map() helper call, so that we can store the owner into ri->map_owner out of the helper. Issue with that is that the actual address of the prog is still subject to change when subsequent rewrites occur that require slow path in bpf_prog_realloc() to alloc more memory, e.g. from patching inlining helper functions or constant blinding. Thus, we really need to take prog->aux as the address we're holding, which also works with prog clones as they share the same aux object. Instead of then fetching aux->prog during runtime, which could potentially incur cache misses due to false sharing, we are going to just use aux for comparison on the map owner. This will also keep the patchlet of the same size, and later check in xdp_map_invalid() only accesses read-only aux pointer from the prog, it's also in the same cacheline already from prior access when calling bpf_func. Fixes: 109980b8 ("bpf: don't select potentially stale ri->map from buggy xdp progs") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Christian Lamparter authored
This patch is pretty much a carbon copy of commit 3079c652 ("caif: Fix napi poll list corruption") with "caif" replaced by "emac". The commit d75b1ade ("net: less interrupt masking in NAPI") breaks emac. It is now required that if the entire budget is consumed when poll returns, the napi poll_list must remain empty. However, like some other drivers emac tries to do a last-ditch check and if there is more work it will call napi_reschedule and then immediately process some of this new work. Should the entire budget be consumed while processing such new work then we will violate the new caller contract. This patch fixes this by not touching any work when we reschedule in emac. Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Eric Dumazet authored
Our recent change exposed a bug in TCP Fastopen Client that syzkaller found right away [1] When we prepare skb with SYN+DATA, we attempt to transmit it, and we update socket state as if the transmit was a success. In socket RTX queue we have two skbs, one with the SYN alone, and a second one containing the DATA. When (malicious) ACK comes in, we now complain that second one had no skb_mstamp. The proper fix is to make sure that if the transmit failed, we do not pretend we sent the DATA skb, and make it our send_head. When 3WHS completes, we can now send the DATA right away, without having to wait for a timeout. [1] WARNING: CPU: 0 PID: 100189 at net/ipv4/tcp_input.c:3117 tcp_clean_rtx_queue+0x2057/0x2ab0 net/ipv4/tcp_input.c:3117() WARN_ON_ONCE(last_ackt == 0); Modules linked in: CPU: 0 PID: 100189 Comm: syz-executor1 Not tainted Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 0000000000000000 ffff8800b35cb1d8 ffffffff81cad00d 0000000000000000 ffffffff828a4347 ffff88009f86c080 ffffffff8316eb20 0000000000000d7f ffff8800b35cb220 ffffffff812c33c2 ffff8800baad2440 00000009d46575c0 Call Trace: [<ffffffff81cad00d>] __dump_stack [<ffffffff81cad00d>] dump_stack+0xc1/0x124 [<ffffffff812c33c2>] warn_slowpath_common+0xe2/0x150 [<ffffffff812c361e>] warn_slowpath_null+0x2e/0x40 [<ffffffff828a4347>] tcp_clean_rtx_queue+0x2057/0x2ab0 n [<ffffffff828ae6fd>] tcp_ack+0x151d/0x3930 [<ffffffff828baa09>] tcp_rcv_state_process+0x1c69/0x4fd0 [<ffffffff828efb7f>] tcp_v4_do_rcv+0x54f/0x7c0 [<ffffffff8258aacb>] sk_backlog_rcv [<ffffffff8258aacb>] __release_sock+0x12b/0x3a0 [<ffffffff8258ad9e>] release_sock+0x5e/0x1c0 [<ffffffff8294a785>] inet_wait_for_connect [<ffffffff8294a785>] __inet_stream_connect+0x545/0xc50 [<ffffffff82886f08>] tcp_sendmsg_fastopen [<ffffffff82886f08>] tcp_sendmsg+0x2298/0x35a0 [<ffffffff82952515>] inet_sendmsg+0xe5/0x520 [<ffffffff8257152f>] sock_sendmsg_nosec [<ffffffff8257152f>] sock_sendmsg+0xcf/0x110 Fixes: 8c72c65b ("tcp: update skb->skb_mstamp more carefully") Fixes: 783237e8 ("net-tcp: Fast Open client - sending SYN-data") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
David S. Miller authored
Salil Mehta says: ==================== Bug fixes for the HNS3 Ethernet Driver for Hip08 SoC This patch set presents some bug fixes for the HNS3 Ethernet driver identified during internal testing & stabilization efforts. Change Log: Patch V2: Resolved comments from Leon Romanovsky Patch V1: Initial Submit ==================== Signed-off-by: -
Lipeng authored
When register/unregister ae_dev, ae_dev should match all client in the client_list. Enet and roce can co-exists together so we should continue checking for enet and roce presence together. So break should not be there. Above caused problems in loading and unloading of modules. Fixes: 38eddd126772 ("net: hns3: Add support of the HNAE3 framework") Signed-off-by:Lipeng <lipeng321@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
-
Lipeng authored
When there is no vlan id in the packets, hardware will treat the vlan id as 0 and look for the mac_vlan table. This patch set the default vlan id of PF as 0. Without this config, it will fail when look for mac_vlan table, and hardware will drop packets. Fixes: 6427264ef330 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by:Mingguang Qu <qumingguang@huawei.com> Signed-off-by:
-
Salil Mehta authored
This patch replaces the ethernet address copy instance with more appropriate ether_addr_copy() function. Fixes: 6427264ef330 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: -
Lipeng authored
This patch fixes the initialization of MAC address, fetched from HNS3 firmware i.e. when it is not randomly generated, to the HNS3 hardware. Fixes: ca60906d2795 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by:
-
