- 08 Oct, 2013 21 commits
-
-
Felipe Balbi authored
Without this node, there will be no palmas driver to notify dwc3 that a cable has been connected and, without that, dwc3 will never initialize. Signed-off-by: Felipe Balbi <balbi@ti.com> [kishon@ti.com: added dt properties for enabling vbus/id interrupts and fixed vbus-supply value after SMPS10 is modeled as 2 regulators] Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
-
Roger Quadros authored
Use a common naming scheme "mode0name.modename flags" for the USB host pins to be consistent. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
-
Marek Belisko authored
This adds devicetree for gta04 (Openmoko next generation board) with necessary support for mmc, usb, leds and button. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
-
Afzal Mohammed authored
Populate uarts, timers, rtc, wdt, gpio, i2c, spi, cpsw & pwm nodes. Reason for adding these nodes early - hwmod code required address space of peripherals corresponding to these nodes (as address space details are removed from hwmod database). uart0, timers - 1 & 2 and synctimer were already present, so here the remaining uarts & timers are added. All properties as per the existing binding has been added for uart, timer, rtc, wdt & gpio. Even though that was not the current scope of work, felt adding those would reduce or require no effort later to get these peripherals working. For i2c, spi, cpsw & pwm - only the properties that were sure to be correct has been added (main intention is to make hwmod happy and avoid any later modification to here added properties). While at it add "ti,hwmod" property to already existing nodes. Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
-
Afzal Mohammed authored
Update AM4372 cpu node to the latest cpus/cpu bindings for ARM. Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
-
R Sricharan authored
Add minimal device tree source needed for DRA7 based SoCs. Also add a board dts file for the dra7-evm (based on dra752) which contains 1.5G of memory with 1G interleaved and 512MB non-interleaved. Also added in the board file are pin configuration details for i2c, mcspi and uart devices on board. Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
-
Ruslan Bilovol authored
The OMAP4 SoC family uses specially-designed PMIC (power management IC) companion chip for power management needs: TWL6030/TWL6032. Therefore there is a typical connection of PMIC to OMAP4 so we can move it into separate .dtsi file and do not duplicate over board-specific files. Tested on OMAP4 SDP board and Pandaboard ES2. Signed-off-by: Ruslan Bilovol <ruslan.bilovol@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
-
Lee Jones authored
Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
-
Lee Jones authored
Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
-
Lee Jones authored
Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
-
Lee Jones authored
Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
-
Lee Jones authored
Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
-
Lee Jones authored
Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
-
Lee Jones authored
Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
-
Kishon Vijay Abraham I authored
SMPS10 has two outputs OUT1 and OUT2. Hence SMPS10 is modeled as two regulators. The DT node is split to reflect it. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
-
Lars Poeschel authored
Following commit ff5c9059 and therefore other omap platforms using the gpio-omap driver correct the #interrupt-cells property on am33xx too. The omap gpio binding documentaion also states that the #interrupt-cells property should be 2. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
-
Alexandre Belloni authored
ARM Performance Monitor Units are available on the am33xx, add the support in the dtsi. Tested with perf and oprofile on a regular beaglebone. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
-
Javier Martinez Canillas authored
The IGEP COM MOdule has a GPIO LED connected to OMAP pins. Configure this pin as output GPIO. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
-
Javier Martinez Canillas authored
The IGEPv2 has a number of GPIO LED connected to OMAP pins. Configure these pins as output GPIO. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
-
Javier Martinez Canillas authored
IGEP boards have a number of LED connected to OMAP or TWL GPIO lines. The actual wiring is different on each board so each board DT has need to configure the mux correctly. Even though it works with the current DT, the kernel complains with: [2.305023] leds-gpio leds.18: pins are not configured from the driver Add an empty pinmux_leds_pins pinctrl child node so boards can override with the correct mux configuration and not depend on default values for the GPIO LEDs to work. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
-
Pavel Machek authored
This adds device tree with necessary support to boot with functional video (on both emulator and real N900 device). Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
-
- 06 Oct, 2013 4 commits
-
-
Linus Torvalds authored
-
Eric W. Biederman authored
Modify the code to use current_euid(), and in_egroup_p, as in done in fs/proc/proc_sysctl.c:test_perm() Cc: stable@vger.kernel.org Reviewed-by: Eric Sandeen <sandeen@redhat.com> Reported-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target fixes from Nicholas Bellinger: "Here are the outstanding target fixes queued up for v3.12-rc4 code. The highlights include: - Make vhost/scsi tag percpu_ida_alloc() use GFP_ATOMIC - Allow sess_cmd_map allocation failure fallback to use vzalloc - Fix COMPARE_AND_WRITE se_cmd->data_length bug with FILEIO backends - Fixes for COMPARE_AND_WRITE callback recursive failure OOPs + non zero scsi_status bug - Make iscsi-target do acknowledgement tag release from RX context - Setup iscsi-target with extra (cmdsn_depth / 2) percpu_ida tags Also included is a iscsi-target patch CC'ed for v3.10+ that avoids legacy wait_for_task=true release during fast-past StatSN acknowledgement, and two other SRP target related patches that address long-standing issues that are CC'ed for v3.3+. Extra thanks to Thomas Glanzmann for his testing feedback with COMPARE_AND_WRITE + EXTENDED_COPY VAAI logic" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target; Allow an extra tag_num / 2 number of percpu_ida tags iscsi-target: Perform release of acknowledged tags from RX context iscsi-target: Only perform wait_for_tasks when performing shutdown target: Fail on non zero scsi_status in compare_and_write_callback target: Fix recursive COMPARE_AND_WRITE callback failure target: Reset data_length for COMPARE_AND_WRITE to NoLB * block_size ib_srpt: always set response for task management target: Fall back to vzalloc upon ->sess_cmd_map kzalloc failure vhost/scsi: Use GFP_ATOMIC with percpu_ida_alloc for obtaining tag ib_srpt: Destroy cm_id before destroying QP. target: Fix xop->dbl assignment in target_xcopy_parse_segdesc_02
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull slave-dmaengine fixes from Vinod Koul: "Here is the slave dmanegine fixes. We have the fix for deadlock issue on imx-dma by Michael and Josh's edma config fix along with author change" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: imx-dma: fix callback path in tasklet dmaengine: imx-dma: fix lockdep issue between irqhandler and tasklet dmaengine: imx-dma: fix slow path issue in prep_dma_cyclic dma/Kconfig: Make TI_EDMA select TI_PRIV_EDMA edma: Update author email address
-
- 05 Oct, 2013 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "This is a small collection of fixes, including a regression fix from Liu Bo that solves rare crashes with compression on. I've merged my for-linus up to 3.12-rc3 because the top commit is only meant for 3.12. The rest of the fixes are also available in my master branch on top of my last 3.11 based pull" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: Fix crash due to not allocating integrity data for a bioset Btrfs: fix a use-after-free bug in btrfs_dev_replace_finishing Btrfs: eliminate races in worker stopping code Btrfs: fix crash of compressed writes Btrfs: fix transid verify errors when recovering log tree
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: "Two patches for the OMAP driver, dealing with setting up IRQs properly on the device tree boot path" * tag 'gpio-v3.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio/omap: auto-setup a GPIO when used as an IRQ gpio/omap: maintain GPIO and IRQ usage separately
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are none fixes for various USB driver problems. The majority are gadget/musb fixes, but there are some new device ids in here as well" * tag 'usb-3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: chipidea: add Intel Clovertrail pci id usb: gadget: s3c-hsotg: fix can_write limit for non-periodic endpoints usb: gadget: f_fs: fix error handling usb: musb: dsps: do not bind to "musb-hdrc" USB: serial: option: Ignore card reader interface on Huawei E1750 usb: musb: gadget: fix otg active status flag usb: phy: gpio-vbus: fix deferred probe from __init usb: gadget: pxa25x_udc: fix deferred probe from __init usb: musb: fix otg default state
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty fixes from Greg KH: "Here are two tty driver fixes for 3.12-rc4. One fixes the reported regression in the n_tty code that a number of people found recently, and the other one fixes an issue with xen consoles that broke in 3.10" * tag 'tty-3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: xen/hvc: allow xenboot console to be used again tty: Fix pty master read() after slave closes
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging fixes from Greg KH: "Here are 4 tiny staging and iio driver fixes for 3.12-rc4. Nothing major, just some small fixes for reported issues" * tag 'staging-3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: comedi: ni_65xx: (bug fix) confine insn_bits to one subdevice iio:magnetometer: Bugfix magnetometer default output registers iio: Remove debugfs entries in iio_device_unregister() iio: amplifiers: ad8366: Remove regulator_put
-
Darrick J. Wong authored
When btrfs creates a bioset, we must also allocate the integrity data pool. Otherwise btrfs will crash when it tries to submit a bio to a checksumming disk: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffff8111e28a>] mempool_alloc+0x4a/0x150 PGD 2305e4067 PUD 23063d067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: btrfs scsi_debug xfs ext4 jbd2 ext3 jbd mbcache sch_fq_codel eeprom lpc_ich mfd_core nfsd exportfs auth_rpcgss af_packet raid6_pq xor zlib_deflate libcrc32c [last unloaded: scsi_debug] CPU: 1 PID: 4486 Comm: mount Not tainted 3.12.0-rc1-mcsum #2 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8802451c9720 ti: ffff880230698000 task.ti: ffff880230698000 RIP: 0010:[<ffffffff8111e28a>] [<ffffffff8111e28a>] mempool_alloc+0x4a/0x150 RSP: 0018:ffff880230699688 EFLAGS: 00010286 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 00000000005f8445 RDX: 0000000000000001 RSI: 0000000000000010 RDI: 0000000000000000 RBP: ffff8802306996f8 R08: 0000000000011200 R09: 0000000000000008 R10: 0000000000000020 R11: ffff88009d6e8000 R12: 0000000000011210 R13: 0000000000000030 R14: ffff8802306996b8 R15: ffff8802451c9720 FS: 00007f25b8a16800(0000) GS:ffff88024fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000018 CR3: 0000000230576000 CR4: 00000000000007e0 Stack: ffff8802451c9720 0000000000000002 ffffffff81a97100 0000000000281250 ffffffff81a96480 ffff88024fc99150 ffff880228d18200 0000000000000000 0000000000000000 0000000000000040 ffff880230e8c2e8 ffff8802459dc900 Call Trace: [<ffffffff811b2208>] bio_integrity_alloc+0x48/0x1b0 [<ffffffff811b26fc>] bio_integrity_prep+0xac/0x360 [<ffffffff8111e298>] ? mempool_alloc+0x58/0x150 [<ffffffffa03e8041>] ? alloc_extent_state+0x31/0x110 [btrfs] [<ffffffff81241579>] blk_queue_bio+0x1c9/0x460 [<ffffffff8123e58a>] generic_make_request+0xca/0x100 [<ffffffff8123e639>] submit_bio+0x79/0x160 [<ffffffffa03f865e>] btrfs_map_bio+0x48e/0x5b0 [btrfs] [<ffffffffa03c821a>] btree_submit_bio_hook+0xda/0x110 [btrfs] [<ffffffffa03e7eba>] submit_one_bio+0x6a/0xa0 [btrfs] [<ffffffffa03ef450>] read_extent_buffer_pages+0x250/0x310 [btrfs] [<ffffffff8125eef6>] ? __radix_tree_preload+0x66/0xf0 [<ffffffff8125f1c5>] ? radix_tree_insert+0x95/0x260 [<ffffffffa03c66f6>] btree_read_extent_buffer_pages.constprop.128+0xb6/0x120 [btrfs] [<ffffffffa03c8c1a>] read_tree_block+0x3a/0x60 [btrfs] [<ffffffffa03caefd>] open_ctree+0x139d/0x2030 [btrfs] [<ffffffffa03a282a>] btrfs_mount+0x53a/0x7d0 [btrfs] [<ffffffff8113ab0b>] ? pcpu_alloc+0x8eb/0x9f0 [<ffffffff81167305>] ? __kmalloc_track_caller+0x35/0x1e0 [<ffffffff81176ba0>] mount_fs+0x20/0xd0 [<ffffffff81191096>] vfs_kern_mount+0x76/0x120 [<ffffffff81193320>] do_mount+0x200/0xa40 [<ffffffff81135cdb>] ? strndup_user+0x5b/0x80 [<ffffffff81193bf0>] SyS_mount+0x90/0xe0 [<ffffffff8156d31d>] system_call_fastpath+0x1a/0x1f Code: 4c 8d 75 a8 4c 89 6d e8 45 89 e0 4c 8d 6f 30 48 89 5d d8 41 83 e0 af 48 89 fb 49 83 c6 18 4c 89 7d f8 65 4c 8b 3c 25 c0 b8 00 00 <48> 8b 73 18 44 89 c7 44 89 45 98 ff 53 20 48 85 c0 48 89 c2 74 RIP [<ffffffff8111e28a>] mempool_alloc+0x4a/0x150 RSP <ffff880230699688> CR2: 0000000000000018 ---[ end trace 7a96042017ed21e2 ]--- Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
-
Chris Mason authored
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull CIFS fixes from Steve French: "Small set of cifs fixes. Most important is Jeff's fix that works around disconnection problems which can be caused by simultaneous use of user space tools (starting a long running smbclient backup then doing a cifs kernel mount) or multiple cifs mounts through a NAT, and Jim's fix to deal with reexport of cifs share. I expect to send two more cifs fixes next week (being tested now) - fixes to address an SMB2 unmount hang when server dies and a fix for cifs symlink handling of Windows "NFS" symlinks" * 'for-linus' of git://git.samba.org/sfrench/cifs-2.6: [CIFS] update cifs.ko version [CIFS] Remove ext2 flags that have been moved to fs.h [CIFS] Provide sane values for nlink cifs: stop trying to use virtual circuits CIFS: FS-Cache: Uncache unread pages in cifs_readpages() before freeing them
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fix from Bjorn Helgaas: "We merged what was intended to be an MMCONFIG cleanup, but in fact, for systems without _CBA (which is almost everything), it broke extended config space for domain 0 and it broke all config space for other domains. This reverts the change" * tag 'pci-v3.12-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "x86/PCI: MMCONFIG: Check earlier for MMCONFIG region at address zero"
-
- 04 Oct, 2013 6 commits
-
-
Bjorn Helgaas authored
This reverts commit 07f9b61c. 07f9b61c was intended to be a cleanup that didn't change anything, but in fact, for systems without _CBA (which is almost everything), it broke extended config space for domain 0 and all config space for other domains. Reference: http://lkml.kernel.org/r/20131004011806.GE20450@dangermouse.emea.sgi.comReported-by: Hedi Berriche <hedi@sgi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI and power management fixes from Rafael Wysocki: - The resume part of user space driven hibernation (s2disk) is now broken after the change that moved the creation of memory bitmaps to after the freezing of tasks, because I forgot that the resume utility loaded the image before freezing tasks and needed the bitmaps for that. The fix adds special handling for that case. - One of recent commits changed the export of acpi_bus_get_device() to EXPORT_SYMBOL_GPL(), which was technically correct but broke existing binary modules using that function including one in particularly widespread use. Change it back to EXPORT_SYMBOL(). - The intel_pstate driver sometimes fails to disable turbo if its no_turbo sysfs attribute is set. Fix from Srinivas Pandruvada. - One of recent cpufreq fixes forgot to update a check in cpufreq-cpu0 which still (incorrectly) treats non-NULL as non-error. Fix from Philipp Zabel. - The SPEAr cpufreq driver uses a wrong variable type in one place preventing it from catching errors returned by one of the functions called by it. Fix from Sachin Kamat. * tag 'pm+acpi-3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: Use EXPORT_SYMBOL() for acpi_bus_get_device() intel_pstate: fix no_turbo cpufreq: cpufreq-cpu0: NULL is a valid regulator, part 2 cpufreq: SPEAr: Fix incorrect variable type PM / hibernate: Fix user space driven resume regression
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
Pull xfs bugfixes from Ben Myers: "There are lockdep annotations for project quotas, a fix for dirent dtype support on v4 filesystems, a fix for a memory leak in recovery, and a fix for the build error that resulted from it. D'oh" * tag 'xfs-for-linus-v3.12-rc4' of git://oss.sgi.com/xfs/xfs: xfs: Use kmem_free() instead of free() xfs: fix memory leak in xlog_recover_add_to_trans xfs: dirent dtype presence is dependent on directory magic numbers xfs: lockdep needs to know about 3 dquot-deep nesting
-
Linus Torvalds authored
Now avc_audit() has no more users with that parameter. Remove it. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
.. so get rid of it. The only indirect users were all the avc_has_perm() callers which just expanded to have a zero flags argument. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ilya Dryomov authored
free_device rcu callback, scheduled from btrfs_rm_dev_replace_srcdev, can be processed before btrfs_scratch_superblock is called, which would result in a use-after-free on btrfs_device contents. Fix this by zeroing the superblock before the rcu callback is registered. Cc: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-