drivers/staging/unisys/visorchipset/file.c:31: error: redefinition of typedef 'GUEST_PHYSICAL_ADDRESS'
drivers/staging/unisys/common-spar/include/channels/controlvmchannel.h:23: note: previous declaration of 'GUEST_PHYSICAL_ADDRESS' was here

Cc: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/unisys/virthba/virthba.c:520:2: warning: format ‘%u’
expects argument of type ‘unsigned int’, but argument 4 has type ‘u64’
[-Wformat=]
drivers/staging/unisys/virthba/virthba.c:749:2: warning: format ‘%d’
expects argument of type ‘int’, but argument 5 has type ‘u64’
[-Wformat=]
drivers/staging/unisys/virthba/virthba.c:1142:4: warning: format ‘%d’
expects argument of type ‘int’, but argument 7 has type ‘u64’
[-Wformat=]
drivers/staging/unisys/virthba/virthba.c:1151:5: warning: format ‘%d’
expects argument of type ‘int’, but argument 5 has type ‘u64’
[-Wformat=]

After apply the patch:
linux-next]$ make C=1 drivers/staging/unisys/virthba/virthba.o
  CHK     include/config/kernel.release
  CHK     include/generated/uapi/linux/version.h
  CHK     include/generated/utsrelease.h
  CALL    scripts/checksyscalls.sh
  CHECK   drivers/staging/unisys/virthba/virthba.c
  CC [M]  drivers/staging/unisys/virthba/virthba.o
Signed-off-by: Honggang Li <enjoymindful@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are several else clauses that aren't necessary listed by checkpatch.pl in
visorchipset_main.c. Remove these.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the missing blank lines between declarations and code in
visorchipset_main.c.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the two spacing errors in parser.c.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There's a missing blank line between code and declarations in file.c.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function uisutil_copy_fragsinfo_from_skb() in uisutils.c is messy and
over-indented. This patch fixes the function's indentation so it is cleaner.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the missing blank line between code and declarations in uisthread.c.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the extraneous return from the uislib module exit function.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The destroy_bus() function is heavily indented and many lines extend past the
right margin. This patch simplifies the function without changing its effects.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the line spacing between code and local variables in uislib.c.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Jonathan writes:

1st round of new IIO drivers, functionality and cleanups for the 3.18 cycle.

Maintainer Updates

* Add 3 designated reviewers for IIO.  Lars, Peter and Hartmut have been
  actively reviewing a lot of patches for a while now so this reflects
  the status quo.  These three are probably the only reason I keep
  my head above the water!

New drivers and device support

* max5821 DAC
* Rockchip SARADC
* TI ADC128S052 ADC
* BMC150 Accelerometer
* exynos ADC driver gains support for s3c24xx and s3c64xx parts.
* kxcjk-1013 gainst range control and runtime PM support to drive
  down it's power usage.

Driver removals

* Drop ad5930, ad99850, ad9852, ad9910 and ad9951 drivers on the simple
  basis that they drivers just provided a register write function with
  no compliant user space ABI whatsoever.  Much better to drop them and
  start again for these in the fullness of time.

Core Enhancements

* Join together neighbouring elements in the demux units that feeds
  the binary interfaces.  This cuts down on the number of individual
  copies needed  when splitting out individual channels from the incoming
  channel scans.
* Other demux related cleanups such as using roundup instead of a local
  implementation.

Cleanups

* Drop an unnecessary double setting of the owner field in xilinx adc.
* Some more patches to use managed (devm) interfaces to cut down on
  complexity of removal code.
* adis16060 coding style fixlets.
* Fix some incorrect error returns in the Xilinx ADC driver.
* Coding style fixlets for various accelerometer drivers.
* Some sparse warning fixes to do with endianness and sign of variables.
* Fix an incorrect and entirely pointless use of sizeof on a dynamic pointer
  in hid-sensor-magn-3d by dropping the relevant code.

There is no need to init .owner field.

Based on the patch from Peter Griffin <peter.griffin@linaro.org>
"mmc: remove .owner field for drivers using module_platform_driver"

This patch removes the superflous .owner field for drivers which
use the module_platform_driver API, as this is overriden in
platform_driver_register anyway."
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

All what these 'drivers' do is expose a single (non standard ABI) sysfs
attribute that when written to does a direct pass-through to spi_write(). This
is rather ugly and does not justify the existence of a driver as the same can
easily done by using the spidev interface.

The drivers will eventually be rewritten as proper IIO ABI compliant drivers
which do have the proper abstraction layers between userspace and the device.
But in the meantime these driver do not add any extra value and just clutter up
the staging area. So just remove them.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Add Michael and myself as the maintainer for the Analog Devices IIO drivers.
The entry matches on all files in drivers/staging/iio and drivers/iio/ starting
with the 'ad' prefix, except for 'adjd' as that one is used by Avago
Technologies.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Add those persons who generally tend to review new IIO patches to the list of
designated reviewers to make sure that they are Cc'ed on new patches.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Peter Meerwald <pmeerw@pmeerw.net>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The dgnc_Major_Control_Registered variable purpose was to act as a flag
to indicate if the character device has been successfully registered
into the kernel. This flag was later checked in the module cleanup
function to know if the character device needs to be deregistered.

However the {device,class}_destroy and unregister_chrdev functions may
be called with 'invalid' data perfectly fine. This means that this
variable is not needed and can safely be removed which is what this
commit does.
Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The dgnc_driver_start variable purpose was to indicate if the driver
'start' routine has been called. Now, because the 'start' routine can
only be called once this variable is not needed thus this commit
removes it.
Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The polling counter variable is only exposed via sysfs and has no other
purpose.

Now, since the polling shall be implemented as a board specific feature
rather than being global in the driver this counter is obsolete.
Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit removes the driver's global state variable. This is ok
because the state was changed only once at the end of init phase thus
the future usage of this variable is pointless.
Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

we should use __packed attribute
Signed-off-by: Purnendu Kapadia <pro8linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed up warnings, break is not useful after return statement.
And the exit Label is deleted, now returning inline.
Signed-off-by: Jeshwanth Kumar N K <jeshkumar555@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the following warning using checkpatch.pl
WARNING: Prefer [subsystem eg: netdev]_warn([subsystem]dev, ... then
dev_warn(dev, ... then pr_warn(...  to printk(KERN_WARNING ...
Signed-off-by: Hema Prathaban <hemaklnce@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the following error using checkpatch.pl
Error: do not use assignment in if condition
Signed-off-by: Hema Prathaban <hemaklnce@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We have a bunch of typedefs for common things that made no sense
and hid the actual type from plain view.
Replace them with proper uXX or sXX types.
Exception is in lustre_idl.h where
they are replaced with __uXX and __sXX to be able to be included
in userspace
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

seqno_t is u64 and mdsno_t is u32 so just use them as such.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

DBG_PRT uses are unnecessarily complex.

Convert DBG_PRT msglevel to pr_<level>.
This changes the KERN_<level> type of several uses.
It also enables dynamic_debug for the pr_debug conversions.

This patch can be a prelude to converting these pr_<level>
uses to dev_<level> as appropriate.

Other changes:

Realign arguments of these conversions.
Remove now unused static int msglevel declarations.
Remove now unused DBG_PRT #define.

Compile tested only.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reported by Dan Carpenter <dan.carpenter@oracle.com>

outsize = sizeof(*gfout) + gfin->gf_pathlen;

Where outsize is int and gf_pathlen is u32 from userspace
can lead to integer overflowwhere outsize is some small number
less than sizeof(*gfout)

Add a check for pathlen to be of sensical size.
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-on: http://review.whamcloud.com/11412
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5476Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The only parameter from userspace that matters is the length of the
buffer. We don't need to allocate then import the whole structure. By
importing only that length, we can save a memory allocation.

Add sparse annotations to that function.
Signed-off-by: frank zago <fzago@cray.com>
Reviewed-on: http://review.whamcloud.com/11167
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5389Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ll_setattr_raw() expects to be called with the inode mutex held so do
when calling it from ll_hsm_import().
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/11349
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5456Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Faccini Bruno <bruno.faccini@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In cl_req_alloc() ensure that the list heads crq_pages and crq_layers
have been initialized before passing the request to
cl_req_completion(). This fixes an oops in the error path.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/11009
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5290Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In very old release (older than Lustre-1.8), if the client talks with
the server that does not support ibits lock, then the client needs to
convert it as plain lock. Such interoperability check and convertion
is out of date for a long time. Drop it.
Signed-off-by: Fan Yong <fan.yong@intel.com>
Reviewed-on: http://review.whamcloud.com/11004
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4971Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: wangdi <di.wang@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In ll_fault0, the 'fault' struct is mostly cleared before the call to
cl_io_loop, but ft_flags is not reset. It is ordinarily set by
the call to filemap_fault in vvp_io_kernel_fault, but if Lustre
returns before calling filemap_fault, it still has the old value of
ft_flags.

ll_fault0 will then consume the ft_flags field. If it has the
VM_FAULT_RETRY bit set, it will be used as ll_fault0() and
ll_fault()'s return value.

This is a problem when VM_FAULT_RETRY is in ft_flags:
When fault/filemap_fault return with that flag set, they have already
released the mmap semaphore, and do_page_fault does not need to
release it.
Incorrectly returning this flag from ll_fault means mmap_sem
is not upped in the kernel's do_page_fault().

In addition to clearing ft_flags, this patch does not use it unless
it is valid.  It's potentially misleading to return ft_flags in
"fault_ret" if ft_flags has not been set by filemap_fault.

This adds clarity, but does not change the current behavior:
When not valid, ft_flags is replaced by fault_ret, which is zero,
as is ft_flags when not set by filemap_fault.
Signed-off-by: Patrick Farrell <paf@cray.com>
Reviewed-on: http://review.whamcloud.com/10956
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5291Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In mdc_enqueue() clear the lock handle, lock mode, and request stored
in the lookup intent if mdc_finish_enqueue() fails.
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/10963
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5289Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Check to make sure total size of request does not overflow when
calculated.  Return -1 from hur_len() if it does overflow.
Signed-off-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-on: http://review.whamcloud.com/10615
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4984Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the 'quoted string split across lines' checkpatch.pl
warning in prism2fw.c.
Signed-off-by: Artemiy Volkov <artemiyv@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the coding style error :
"WARNING: else is not generally useful after a break or return"
reported by checkpatch.pl
Signed-off-by: Vibi Sreenivasan <vibisreenivasan@linuxmail.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are a couple comedi drivers that duplicate some of the register
defines used by the 8255 module. Move these defines into the header
so the duplication can be removed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The drivers that use this module with memory mapped io all have the
ioremap'ed base address stored in the comedi_device 'mmio' member.

Introduce a default (*io) function that does 8-bit memory mapped io.

Modify subdev_8255_init() so that it takes a flag parameter indicating
if the io is port or memory mapped. Make the function static and rename
it to __subdev_8255_init().

Introduce two exported wrappers for __subdev_8255_init():

  subdev_8255_init() - for drivers that do 8-bit port io
  subdev_8255_mm_init() - for drivers that do 8-bit memory mapped io

Use subdev_8255_mm_init() in the drivers that do 8-bit memory mapped io
and remove the private (*io) functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The async command support in this module is incomplete and nothing
has ever used it. Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>