This driver already uses ioremap_wc() on the same range
so when write-combining is available that will be used
instead.

Cc: Hyong-Youb Kim <hykim@myri.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Juergen Gross <jgross@suse.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: netdev@vger.kernel.org
Cc: Juergen Gross <jgross@suse.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If NO_DMA=y:

    drivers/built-in.o: In function `grcan_free_dma_buffers':
    grcan.c:(.text+0x2d7716): undefined reference to `dma_free_coherent'
    drivers/built-in.o: In function `grcan_allocate_dma_buffers':
    grcan.c:(.text+0x2d779c): undefined reference to `dma_alloc_coherent'
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If NO_DMA=y:

    drivers/built-in.o: In function `arc_emac_tx_clean':
    emac_main.c:(.text+0x2decde): undefined reference to `dma_unmap_single'
    drivers/built-in.o: In function `arc_emac_rx':
    emac_main.c:(.text+0x2dee1c): undefined reference to `dma_unmap_single'
    emac_main.c:(.text+0x2dee72): undefined reference to `dma_map_single'
    emac_main.c:(.text+0x2dee7e): undefined reference to `dma_mapping_error'
    drivers/built-in.o: In function `arc_emac_probe':
    (.text+0x2df2ee): undefined reference to `dmam_alloc_coherent'
    drivers/built-in.o: In function `arc_emac_open':
    emac_main.c:(.text+0x2df6d8): undefined reference to `dma_map_single'
    emac_main.c:(.text+0x2df6e4): undefined reference to `dma_mapping_error'
    drivers/built-in.o: In function `arc_emac_tx':
    emac_main.c:(.text+0x2df9e4): undefined reference to `dma_map_single'
    emac_main.c:(.text+0x2df9f0): undefined reference to `dma_mapping_error'
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If NO_DMA=y:

    drivers/built-in.o: In function `xgbe_probe':
    xgbe-main.c:(.text+0x2def0a): undefined reference to `dma_set_mask'
    xgbe-main.c:(.text+0x2def20): undefined reference to `dma_supported'
    drivers/built-in.o: In function `xgbe_rx_poll':
    xgbe-drv.c:(.text+0x2e0320): undefined reference to `dma_sync_single_for_cpu'
    xgbe-drv.c:(.text+0x2e035e): undefined reference to `dma_sync_single_for_cpu'
    drivers/built-in.o: In function `xgbe_unmap_rdata':
    xgbe-desc.c:(.text+0x2e5fe4): undefined reference to `dma_unmap_page'
    xgbe-desc.c:(.text+0x2e5ffa): undefined reference to `dma_unmap_single'
    xgbe-desc.c:(.text+0x2e604a): undefined reference to `dma_unmap_page'
    xgbe-desc.c:(.text+0x2e6084): undefined reference to `dma_unmap_page'
    drivers/built-in.o: In function `xgbe_alloc_pages':
    xgbe-desc.c:(.text+0x2e6156): undefined reference to `dma_map_page'
    xgbe-desc.c:(.text+0x2e6164): undefined reference to `dma_mapping_error'
    drivers/built-in.o: In function `xgbe_free_ring':
    xgbe-desc.c:(.text+0x2e63d4): undefined reference to `dma_unmap_page'
    xgbe-desc.c:(.text+0x2e640e): undefined reference to `dma_unmap_page'
    xgbe-desc.c:(.text+0x2e644a): undefined reference to `dma_free_coherent'
    drivers/built-in.o: In function `xgbe_init_ring':
    xgbe-desc.c:(.text+0x2e64d4): undefined reference to `dma_alloc_coherent'
    drivers/built-in.o: In function `xgbe_map_tx_skb':
    xgbe-desc.c:(.text+0x2e6628): undefined reference to `dma_map_single'
    xgbe-desc.c:(.text+0x2e6638): undefined reference to `dma_mapping_error'
    xgbe-desc.c:(.text+0x2e66b2): undefined reference to `dma_map_single'
    xgbe-desc.c:(.text+0x2e66c2): undefined reference to `dma_mapping_error'
    xgbe-desc.c:(.text+0x2e6762): undefined reference to `dma_map_page'
    xgbe-desc.c:(.text+0x2e6772): undefined reference to `dma_mapping_error'
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

fixed several comment and whitespace style issues
Signed-off-by: Jason Eastman <eastman.jason.linux@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jon Maloy says:

====================
tipc: three bug fixes

A set of unrelated corrections; one for the tipc netns implementation,
one regarding problems with random link resets, and one removing a
an erroneous refcount decrement when reading link statistsics via
netlink.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When link statistics is dumped over netlink, we iterate over
the list of peer nodes and append each links statistics to
the netlink msg. In the case where the dump is resumed after
filling up a nlmsg, the node refcnt is decremented without
having been incremented previously which may cause the node
reference to be freed. When this happens, the following
info/stacktrace will be generated, followed by a crash or
undefined behavior.
We fix this by removing the erroneous call to tipc_node_put
inside the loop that iterates over nodes.

[  384.312303] INFO: trying to register non-static key.
[  384.313110] the code is fine but needs lockdep annotation.
[  384.313290] turning off the locking correctness validator.
[  384.313290] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.0.0+ #13
[  384.313290] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[  384.313290]  ffff88003c6d0290 ffff88003cc03ca8 ffffffff8170adf1 0000000000000007
[  384.313290]  ffffffff82728730 ffff88003cc03d38 ffffffff810a6a6d 00000000001d7200
[  384.313290]  ffff88003c6d0ab0 ffff88003cc03ce8 0000000000000285 0000000000000001
[  384.313290] Call Trace:
[  384.313290]  <IRQ>  [<ffffffff8170adf1>] dump_stack+0x4c/0x65
[  384.313290]  [<ffffffff810a6a6d>] __lock_acquire+0xf3d/0xf50
[  384.313290]  [<ffffffff810a7375>] lock_acquire+0xd5/0x290
[  384.313290]  [<ffffffffa0043e8c>] ? link_timeout+0x1c/0x170 [tipc]
[  384.313290]  [<ffffffffa0043e70>] ? link_state_event+0x4e0/0x4e0 [tipc]
[  384.313290]  [<ffffffff81712890>] _raw_spin_lock_bh+0x40/0x80
[  384.313290]  [<ffffffffa0043e8c>] ? link_timeout+0x1c/0x170 [tipc]
[  384.313290]  [<ffffffffa0043e8c>] link_timeout+0x1c/0x170 [tipc]
[  384.313290]  [<ffffffff810c4698>] call_timer_fn+0xb8/0x490
[  384.313290]  [<ffffffff810c45e0>] ? process_timeout+0x10/0x10
[  384.313290]  [<ffffffff810c5a2c>] run_timer_softirq+0x21c/0x420
[  384.313290]  [<ffffffffa0043e70>] ? link_state_event+0x4e0/0x4e0 [tipc]
[  384.313290]  [<ffffffff8105a954>] __do_softirq+0xf4/0x630
[  384.313290]  [<ffffffff8105afdd>] irq_exit+0x5d/0x60
[  384.313290]  [<ffffffff8103ade1>] smp_apic_timer_interrupt+0x41/0x50
[  384.313290]  [<ffffffff817144a0>] apic_timer_interrupt+0x70/0x80
[  384.313290]  <EOI>  [<ffffffff8100db10>] ? default_idle+0x20/0x210
[  384.313290]  [<ffffffff8100db0e>] ? default_idle+0x1e/0x210
[  384.313290]  [<ffffffff8100e61a>] arch_cpu_idle+0xa/0x10
[  384.313290]  [<ffffffff81099803>] cpu_startup_entry+0x2c3/0x530
[  384.313290]  [<ffffffff810d2893>] ? clockevents_register_device+0x113/0x200
[  384.313290]  [<ffffffff81038b0f>] start_secondary+0x13f/0x170

Fixes: 8a0f6ebe ("tipc: involve reference counter for node structure")
Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the function tipc_sk_rcv(), the stack variable 'err'
is only initialized to TIPC_ERR_NO_PORT for the first
iteration over the link input queue. If a chain of messages
are received from a link, failure to lookup the socket for
any but the first message will cause the message to bounce back
out on a random link.
We fix this by properly initializing err.
Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a new topology server is launched in a new namespace, its
listening socket is inserted into the "init ns" namespace's socket
hash table rather than the one owned by the new namespace. Although
the socket's namespace is forcedly changed to the new namespace later,
the socket is still stored in the socket hash table of "init ns"
namespace. When a client created in the new namespace connects
its own topology server, the connection is failed as its server's
socket could not be found from its own namespace's socket table.

If __sock_create() instead of original sock_create_kern() is used
to create the server's socket through specifying an expected namesapce,
the socket will be inserted into the specified namespace's socket
table, thereby avoiding to the topology server broken issue.

Fixes: 76100a8a ("tipc: fix netns refcnt leak")
Reported-by: Erik Hugne <erik.hugne@ericsson.com>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

AFAIK the PAPR document which defines the virtual device interface used by
the ibmveth driver doesn't specify a specific maximum MTU.  So, in the
ibmveth driver, the maximum allowed MTU is determined by the maximum
allocated buffer size of 64k (corresponding to one page in the common case)
minus the per-buffer overhead IBMVETH_BUFF_OH (which has value 22 for 14
bytes of ethernet header, plus 8 bytes for an opaque handle).

This suggests a maximum allowable MTU of 65514 bytes, but in fact the
driver only permits a maximum MTU of 65513.  This is because there is a <
instead of an <= in ibmveth_change_mtu(), which only permits an MTU which
is strictly smaller than the buffer size, rather than allowing the buffer
to be completely filled.

This patch fixes the buglet.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With the CPU iteration variable called 'i', it's relatively easy
to have variable shadowing which sparse will warn about. Avoid
that by renaming the variable to __cpu which is less likely to
be used in the surrounding context.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The return value of vxlan_fdb_replace always is greater than or equal to 0
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In 02c958dd (net/macb: add TX multiqueue support for gem), the
initialization of tx_head and tx_tail in macb_init_rings() was moved
inside the loop that iterates over each element in the ring.  Since
tx_head and tx_tail only need to be assigned once, move them back out of
the loop.
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

build_skb() should look at the page pfmemalloc status.
If set, this means page allocator allocated this page in the
expectation it would help to free other pages. Networking
stack can do that only if skb->pfmemalloc is also set.

Also, we must refrain using high order pages from the pfmemalloc
reserve, so __page_frag_refill() must also use __GFP_NOMEMALLOC for
them. Under memory pressure, using order-0 pages is probably the best
strategy.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The code there just open-codes the same, so use the provided macro instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Robert Shearman says:

====================
mpls: ABI changes for security and correctness

V2:
 - don't treat loopback interfaces specially by enabling mpls by
   default

These changes make mpls not be enabled by default on all
interfaces when in use for security, along with ensuring that a label
not valid as an outgoing label can be added in mpls routes.

This series contains three ABI/behaviour-affecting changes which have
been split out from "[PATCH net-next v4 0/6] mpls: Behaviour-changing
improvements" without any further modification. These changes need to
be considered for 4.1 otherwise we'll be stuck with the current
behaviour/ABI forever.
====================
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The reserved implicit-NULL label isn't allowed to appear in the label
stack for packets, so make it an error for the control plane to
specify it as an outgoing label.
Suggested-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

An MPLS network is a single trust domain where the edges must be in
control of what labels make their way into the core. The simplest way
of ensuring this is for the edge device to always impose the labels,
and not allow forward labeled traffic from untrusted neighbours. This
is achieved by allowing a per-device configuration of whether MPLS
traffic input from that interface should be processed or not.

To be secure by default, the default state is changed to MPLS being
disabled on all interfaces unless explicitly enabled and no global
option is provided to change the default. Whilst this differs from
other protocols (e.g. IPv6), network operators are used to explicitly
enabling MPLS forwarding on interfaces, and with the number of links
to the MPLS core typically fairly low this doesn't present too much of
a burden on operators.

Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add per-device MPLS state to supported interfaces. Use the presence of
this state in mpls_route_add to determine that this is a supported
interface.

Use the presence of mpls_dev to drop packets that arrived on an
unsupported interface - previously they were allowed through.

Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On some feature changes, driver employes an inner-reload flow where it
resets the function and re-configures it with the new required set of
parameters.

Such a flow proves fatal to any VF since those were not intended to be used
while HW is being reset underneath, causing them [at best] to lose all
connectivity.

This changes driver behavior to fail all configuration changes [e.g., mtu
change] requested of the driver in case VFs are active.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Thomas Graf says:

====================
rhashtable rehashing fixes

Some rhashtable rehashing bugs found while testing with the
next rhashtable self-test queued up for the next devel cycle:

https://github.com/tgraf/net-next/commits/rht

v2:
 - Moved schedule_work() call into rhashtable_insert_rehash()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The current code currently only stops inserting rehashes into the
chain when no resizes are currently scheduled. As long as resizes
are scheduled and while inserting above the utilization watermark,
more and more rehashes will be scheduled.

This lead to a perfect DoS storm with thousands of rehashes
scheduled which lead to thousands of spinlocks to be taken
sequentially.

Instead, only allow either a series of resizes or a single rehash.
Drop any further rehashes and return -EBUSY.

Fixes: ccd57b1b ("rhashtable: Add immediate rehash during insertion")
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

When rhashtable_insert_rehash() fails with ENOMEM, this indicates that
we can't allocate the necessary memory in the current context but the
limits as set by the user would still allow to grow.

Thus attempt an async resize in the background where we can allocate
using GFP_KERNEL which is more likely to succeed. The insertion itself
will still fail to indicate pressure.

This fixes a bug where the table would never continue growing once the
utilization is above 100%.

Fixes: ccd57b1b ("rhashtable: Add immediate rehash during insertion")
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using sk_stream_alloc_skb() in tcp_send_fin() is dangerous in
case a huge process is killed by OOM, and tcp_mem[2] is hit.

To be able to free memory we need to make progress, so this
patch allows FIN packets to not care about tcp_mem[2], if
skb allocation succeeded.

In a follow-up patch, we might abort tcp_send_fin() infinite loop
in case TIF_MEMDIE is set on this thread, as memory allocator
did its best getting extra memory already.

This patch reverts d22e1537 ("tcp: fix tcp fin memory accounting")

Fixes: d22e1537 ("tcp: fix tcp fin memory accounting")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull MMC fixes from Ulf Hansson:
 "Here is two mmc core fixes for v.4.1 rc1:

   - fix error code propagation in mmc_pwrseq_simple_alloc()

   - revert 'mmc: core: Convert mmc_driver to device_driver'"

* tag 'mmc-4.1-rc1' of git://git.linaro.org/people/ulf.hansson/mmc:
  Revert "mmc: core: Convert mmc_driver to device_driver"
  mmc: pwrseq: Fix error code propagation in mmc_pwrseq_simple_alloc()

HSU_DMA is selected by the HSU_DMA_PCI driver, this should be user selected
so remove the user prompt for this
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ARM SoC late changes from Olof Johansson:
 "We were expecting to sit on this branch through most of the merge
  window since the contents was merged into our tree late, but we ended
  up sitting on all of our contents so it can go in with the rest.

  The contents here is:

   - a large branch of cleanups of the CM/PRM blocks on OMAP.

   - a couple of patches plumbing up CM/PRM on OMAP5 and DRA7.

   - a branch with DT updates for Freescale i.MX.  including some
     shuffling from .dts to .dtsi (include) files that causes a little
     churn"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (78 commits)
  ARM: OMAP2+: Fix booting with configs that don't have MFD_SYSCON
  ARM: OMAP4+: control: add support for initializing control module via DT
  ARM: dts: dra7: add minimal l4 bus layout with control module support
  ARM: dts: omap5: add minimal l4 bus layout with control module support
  ARM: OMAP4+: control: remove support for legacy pad read/write
  ARM: OMAP4: display: convert display to use syscon for dsi muxing
  ARM: dts: omap4: add minimal l4 bus layout with control module support
  ARM: dts: am4372: add minimal l4 bus layout with control module support
  ARM: dts: am43xx-epos-evm: fix pinmux node layout
  ARM: dts: am33xx: add minimal l4 bus layout with control module support
  ARM: dts: omap3: add minimal l4 bus layout with control module support
  ARM: dts: omap24xx: add minimal l4 bus layout with control module support
  ARM: OMAP2+: control: add syscon support for register accesses
  ARM: OMAP2+: id: cache omap_type value
  ARM: OMAP2+: control: remove API for getting control module base address
  ARM: OMAP2+: clock: add low-level support for regmap
  ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init
  ARM: OMAP4+: PRM: setup prm_features from the PRM init time flags
  ARM: OMAP2+: CM: move SoC specific init calls within a generic API
  ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility
  ...

Pull ARM SoC 64-bit changes from Olof Johansson:
 "Mostly DT updates for arm64, but also a couple of Kconfig additions.

  Main contents:

   - Qualcomm MSM8916/APQ8016

   - Spreadtrum SC9836

   - Xilinx ZynqMP

   - pincontrol entries for MediaTek MT8173"

* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: dts: add interrupt-affinity property to pmu node for juno
  arm64: dts: Add Qualcomm APQ8016 SBC evaluation board dts
  arm64: dts: Add Qualcomm MSM8916 SoC and evaluation board dts
  arm64: dts: sprd: adding coresight entries to Spreadtrum SC9836
  arm64: Add support for Spreadtrum's Sharkl64 Platform in Kconfig and defconfig
  arm64: dts: Add support for Spreadtrum SC9836 SoC in dts and Makefile
  ARM64: Add new Xilinx ZynqMP SoC
  arm64: qcom: Add support for Qualcomm MSM8916 SoC
  arm64: dts: mt8173: Add pinctrl/GPIO/EINT node for mt8173.
  arm64: mediatek: Select PINCTRL for Mediatek platform

Pull ARM SoC defconfig updates from Olof Johansson:
 "We keep collecting defconfig updates in a separate branch mostly to
  encourage people to handle them separately and avoid conflicts between
  different topics.

  Most of these are enablement of new drivers that have come in, or
  minor config refreshes due to reorderings in Kconfig files, etc.  I.e.
  mostly minor churn of various kinds.

  We might start folding this branch into something else for upstream
  merge since it's so small, but keep it independent in our own tree for
  the above reasons"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
  ARM: multi_v7_defconfig: enable alpine platform
  ARM: multi_v7_defconfig: Add gpio-restart driver
  ARM: multi_v7_defconfig: Build the Marvell WiFi-Ex driver as a module
  ARM: multi_v7_defconfig: Enable support for ELAN i2c trackpads
  ARM: multi_v7_defconfig: Enable Tegra ACTMON support
  ARM: configs: remove all CONFIG_RCAR_AUDMAC_PP from ARM defconfigs
  ARM: configs: enable Marvell Armada 39x in multi_v7_defconfig
  ARM: exynos_defconfig: Enable HDMI support
  ARM: exynos_defconfig: Enable options to mount a rootfs via NFS
  ARM: qcom: Increase MMC_BLOCK_MINORS in defconfig
  ARM: mvebu: Enable perf support in mvebu_v7_defconfig
  ARM: exynos_defconfig: Enable ChromeOS EC chardev driver
  ARM: exynos_defconfig: Enable CPU idle
  ARM: exynos_defconfig: Enable Marvell WiFi-Ex support
  arm: qcom: Update defconfig
  arm: qcom: Enable lpass clock driver in defconfig
  ARM: omap2plus_defconfig: Enable n900 modem as loadable modules
  ARM: omap2plus_defconfig: Update bluetooth options
  ARM: omap2plus_defconfig: Enable leds-pwm
  ARM: omap1_defconfig: drop obsolete Kconfig symbols
  ...

Pull ARM SoC multiplatform code changes from Olof Johansson:
 "The changes here belong to two main platforms:

   - Atmel At91 is flipping the bit and going multiplatform.  This
     includes some cleanups and removal of code, and the final flip of
     config dependencies

   - Shmobile has several platforms that are going multiplatform, but
     this branch also contains a bunch of cleanups that they weren't
     able to keep separate in a good way.  THere's also a removal of one
     of their SoCs and the corresponding boards (sh7372 and mackerel)"

* tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits)
  ARM: at91/pm: move AT91_MEMCTRL_* to pm.h
  ARM: at91/pm: move the standby functions to pm.c
  ARM: at91: fix pm_suspend.S compilation when ARMv6 is selected
  ARM: at91: add a Kconfig dependency on multi-platform
  ARM: at91: drop AT91_TIMER_HZ
  ARM: at91: remove hardware.h
  ARM: at91: remove SoC headers
  ARM: at91: remove useless mach/cpu.h
  ARM: at91: remove unused headers
  ARM: at91: switch at91_dt_defconfig to multiplatform
  ARM: at91: switch to multiplatform
  ARM: shmobile: r8a7778: enable multiplatform target
  ARM: shmobile: bockw: add sound to DT
  ARM: shmobile: r8a7778: add sound to DT
  ARM: shmobile: bockw: add devices hooked up to i2c0 to DT
  DT: i2c: add trivial binding for OKI ML86V7667 video decoder
  ARM: shmobile: r8a7778: common clock framework CPG driver
  ARM: shmobile: bockw dts: set extal clock frequency
  ARM: shmobile: bockw dts: Move Ethernet node to BSC
  ARM: shmobile: r8a73a4: Remove legacy code
  ...

Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for v4.1.  Some of these are for drivers/soc, where we
  find more and more SoC-specific drivers these days.  Some are for
  other driver subsystems where we have received acks from the
  appropriate maintainers.

  The larger parts of this branch are:

   - MediaTek support for their PMIC wrapper interface, a high-level
     interface for talking to the system PMIC over a dedicated I2C
     interface.

   - Qualcomm SCM driver has been moved to drivers/firmware.  It's used
     for CPU up/down and needs to be in a shared location for arm/arm64
     common code.

   - cleanup of ARM-CCI PMU code.

   - another set of cleanusp to the OMAP GPMC code"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
  soc/mediatek: Remove unused variables
  clocksource: atmel-st: select MFD_SYSCON
  soc: mediatek: Add PMIC wrapper for MT8135 and MT8173 SoCs
  arm-cci: Fix CCI PMU event validation
  arm-cci: Split the code for PMU vs driver support
  arm-cci: Get rid of secure transactions for PMU driver
  arm-cci: Abstract the CCI400 PMU specific definitions
  arm-cci: Rearrange code for splitting PMU vs driver code
  drivers: cci: reject groups spanning multiple HW PMUs
  ARM: at91: remove useless include
  clocksource: atmel-st: remove mach/hardware dependency
  clocksource: atmel-st: use syscon/regmap
  ARM: at91: time: move the system timer driver to drivers/clocksource
  ARM: at91: properly initialize timer
  ARM: at91: at91rm9200: remove deprecated arm_pm_restart
  watchdog: at91rm9200: implement restart handler
  watchdog: at91rm9200: use the system timer syscon
  mfd: syscon: Add atmel system timer registers definition
  ARM: at91/dt: declare atmel,at91rm9200-st as a syscon
  soc: qcom: gsbi: Add support for ADM CRCI muxing
  ...

Pull ARM DT updates from Olof Johansson:
 "As always, this tends to be one of our bigger branches.  There are
  lots of updates this release, but not that many jumps out as something
  that needs more detailed coverage.  Some of the highlights are:

   - DTs for the new Annapurna Labs Alpine platform

   - more graphics DT pieces falling into place on Exynos, bridges,
     clocks.

   - plenty of DT updates for Qualcomm platforms for various IP blocks

   - some churn on Tegra due to switch-over to tool-generated pinctrl
     data

   - misc fixes and updates for Atmel at91 platforms

   - various DT updates to add IP block support on Broadcom's Cygnus
     platforms

   - more updates for Renesas platforms as DT support is added for
     various IP blocks (IPMMU, display, audio, etc)"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (231 commits)
  ARM: dts: alpine: add internal pci
  Revert "ARM: dts: mt8135: Add pinctrl/GPIO/EINT node for mt8135."
  ARM: mvebu: use 0xf1000000 as internal registers on Armada 370 DB
  ARM: dts: qcom: Add idle state device nodes for 8064
  ARM: dts: qcom: Add idle states device nodes for 8084
  ARM: dts: qcom: Add idle states device nodes for 8974/8074
  ARM: dts: qcom: Update power-controller device node for 8064 Krait CPUs
  ARM: dts: qcom: Add power-controller device node for 8084 Krait CPUs
  ARM: dts: qcom: Add power-controller device node for 8074 Krait CPUs
  devicetree: bindings: Document qcom,idle-states
  devicetree: bindings: Update qcom,saw2 node bindings
  dt-bindings: Add #defines for MSM8916 clocks and resets
  arm: dts: qcom: Add LPASS Audio HW to IPQ8064 device tree
  arm: dts: qcom: Add APQ8084 chipset SPMI PMIC's nodes
  arm: dts: qcom: Add 8x74 chipset SPMI PMIC's nodes
  arm: dts: qcom: Add SPMI PMIC Arbiter nodes for APQ8084 and MSM8974
  arm: dts: qcom: Add LCC nodes
  arm: dts: qcom: Add TCSR support for MSM8960
  arm: dts: qcom: Add TCSR support for MSM8660
  arm: dts: qcom: Add TCSR support for IPQ8064
  ...

Pull ARM SoC platform updates from Olof Johansson:
 "Our SoC branch usually contains expanded support for new SoCs and
  other core platform code.  In this case, that includes:

   - support for the new Annapurna Labs "Alpine" platform

   - a rework greatly simplifying adding new platform support to the
     MCPM subsystem (Multi-cluster power management)

   - cpuidle and PM improvements for Exynos3250

   - misc updates for Renesas, OMAP, Meson, i.MX.  Some of these could
     have gone in other branches but ended up here for various reasons"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits)
  ARM: alpine: add support for generic pci
  ARM: Exynos: migrate DCSCB to the new MCPM backend abstraction
  ARM: vexpress: migrate DCSCB to the new MCPM backend abstraction
  ARM: vexpress: DCSCB: tighten CPU validity assertion
  ARM: vexpress: migrate TC2 to the new MCPM backend abstraction
  ARM: MCPM: move the algorithmic complexity to the core code
  ARM: EXYNOS: allow cpuidle driver usage on Exynos3250 SoC
  ARM: EXYNOS: add AFTR mode support for Exynos3250
  ARM: EXYNOS: add code for setting/clearing boot flag
  ARM: EXYNOS: fix CPU1 hotplug on Exynos3250
  ARM: S3C64XX: Use fixed IRQ bases to avoid conflicts on Cragganmore
  ARM: cygnus: fix const declaration bcm_cygnus_dt_compat
  ARM: DRA7: hwmod: Fix the hwmod class for GPTimer4
  ARM: DRA7: hwmod: Add data for GPTimers 13 through 16
  ARM: EXYNOS: Remove left over 'extra_save'
  ARM: EXYNOS: Constify exynos_pm_data array
  ARM: EXYNOS: use static in suspend.c
  ARM: EXYNOS: Use platform device name as power domain name
  ARM: EXYNOS: add support for async-bridge clocks for pm_domains
  ARM: omap-device: add missed callback for suspend-to-disk
  ...

Pull ARM SoC cleanups from Olof Johansson:
 "We've got a fairly large cleanup branch this time.  The bulk of this
  is removal of non-DT platforms of several flavors:

   - Atmel at91 platforms go full-DT, with removal of remaining
     board-file based support

   - OMAP removes legacy board files for three more platforms

   - removal of non-DT mach-msm, newer Qualcomm platforms now live in
     mach-qcom

   - Freescale i.MX25 also removes non-DT platform support"

Most of the rest of the changes here are fallout from the above, i.e. for
example removal of drivers that now lack platforms, etc.

* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (58 commits)
  mmc: Remove msm_sdcc driver
  gpio: Remove gpio-msm-v1 driver
  ARM: Remove mach-msm and associated ARM architecture code
  ARM: shmobile: cpuidle: Remove the pointless default driver
  ARM: davinci: dm646x: Add interrupt resource for McASPs
  ARM: davinci: irqs: Correct McASP1 TX interrupt definition for DM646x
  ARM: davinci: dm646x: Clean up the McASP DMA resources
  ARM: davinci: devices-da8xx: Add support for McASP2 on da830
  ARM: davinci: devices-da8xx: Clean up and correct the McASP device creation
  ARM: davinci: devices-da8xx: Add interrupt resource to McASP structs
  ARM: davinci: devices-da8xx: Add resource name for the McASP DMA request
  ARM: OMAP2+: Remove legacy support for omap3 TouchBook
  ARM: OMAP3: Remove legacy support for devkit8000
  ARM: OMAP3: Remove legacy support for EMA-Tech Stalker board
  ARM: shmobile: Consolidate the pm code for R-Car Gen2
  ARM: shmobile: r8a7791: Correct SYSCIER value
  ARM: shmobile: r8a7790: Correct SYSCIER value
  ARM: at91: remove old setup
  ARM: at91: sama5d4: remove useless map_io
  ARM: at91: sama5 use SoC detection infrastructure
  ...

Pull ARM SoC fixes from Olof Johansson:
 "Here's the usual "low-priority fixes that didn't make it into the last
  few -rcs, with a twist: We had a fixes pull request that I didn't send
  in time to get into 4.0, so we'll send some of them to Greg for
  -stable as well.

  Contents here is as usual not all that controversial:

   - a handful of randconfig fixes from Arnd, in particular for older
     Samsung platforms

   - Exynos fixes, !SMP building, DTS updates for MMC and lid switch

   - Kbuild fix to create output subdirectory for DTB files

   - misc minor fixes for OMAP"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits)
  ARM: at91/dt: sama5d3 xplained: add phy address for macb1
  kbuild: Create directory for target DTB
  ARM: mvebu: Disable CPU Idle on Armada 38x
  ARM: DRA7: Enable Cortex A15 errata 798181
  ARM: dts: am57xx-beagle-x15: Add thermal map to include fan and tmp102
  ARM: dts: DRA7: Add bandgap and related thermal nodes
  bus: ocp2scp: SYNC2 value should be changed to 0x6
  ARM: dts: am4372: Add "ti,am437x-ocp2scp" as compatible string for OCP2SCP
  ARM: OMAP2+: remove superfluous NULL pointer check
  ARM: EXYNOS: Fix build breakage cpuidle on !SMP
  ARM: dts: fix lid and power pin-functions for exynos5250-spring
  ARM: dts: fix mmc node updates for exynos5250-spring
  ARM: OMAP4: remove dead kconfig option OMAP4_ERRATA_I688
  MAINTAINERS: add OMAP defconfigs under OMAP SUPPORT
  ARM: OMAP1: PM: fix some build warnings on 1510-only Kconfigs
  ARM: cns3xxx: don't export static symbol
  ARM: S3C24XX: avoid a Kconfig warning
  ARM: S3C24XX: fix header file inclusions
  ARM: S3C24XX: fix building without PM_SLEEP
  ARM: S3C24XX: use SAMSUNG_WAKEMASK for s3c2416
  ...

Pull sparc fixes from David Miller:

 1) ldc_alloc_exp_dring() can be called from softints, so use
    GFP_ATOMIC.  From Sowmini Varadhan.

 2) Some minor warning/build fixups for the new iommu-common code on
    certain archs and with certain debug options enabled.  Also from
    Sowmini Varadhan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Use GFP_ATOMIC in ldc_alloc_exp_dring() as it can be called in softirq context
  sparc64: Use M7 PMC write on all chips T4 and onward.
  iommu-common: rename iommu_pool_hash to iommu_hash_common
  iommu-common: fix x86_64 compiler warnings

Pull networking fixes from David Miller:
 "Just a few fixes trickling in at this point.

  1) If we see an attached socket on an skb in the ipv4 forwarding path,
     bail.  This can happen due to races with FIB rule addition, and
     deletion, and we should just drop such frames.  From Sebastian
     Pöhn.

  2) pppoe receive should only accept packets destined for this hosts's
     MAC address.  From Joakim Tjernlund.

  3) Handle checksum unwrapping properly in ppp receive properly when
     it's encapsulated in UDP in some way, fix from Tom Herbert.

  4) Fix some bugs in mv88e6xxx DSA driver resulting from the conversion
     from register offset constants to mnenomic macros.  From Vivien
     Didelot.

  5) Fix handling of HCA max message size in mlx4 adapters, from Eran
     Ben ELisha"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net/mlx4_core: Fix reading HCA max message size in mlx4_QUERY_DEV_CAP
  tcp: add memory barriers to write space paths
  altera tse: Error-Bit on tx-avalon-stream always set.
  net: dsa: mv88e6xxx: use PORT_DEFAULT_VLAN
  net: dsa: mv88e6xxx: fix setup of port control 1
  ppp: call skb_checksum_complete_unset in ppp_receive_frame
  net: add skb_checksum_complete_unset
  pppoe: Lacks DST MAC address check
  ip_forward: Drop frames with attached skb->sk

Merge tag 'omap-for-v4.1/prcm-dts-mfd-syscon-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/late

Merge "urgent omap boot fix for v4.1 if MFD_SYSCON is not set" from Tony
Lindgren:

Urgent pull request for v4.1 to booting for custom kernel
.config files that do not have MFD_SYSCON set.

Omaps now have a dependency to MFD_SYSCON for system control
module generic register area and some clocks with the changes
done in omap-for-v4.1/prcm-dts branch.

This can be pulled on top of omap-for-v4.1/prcm-dts, or into
fixes for v4.1.

We already do have a slight MFD_SYSCON dependency for
REGULATOR_PBIAS for dual voltage MMC cards on the first MMC
bus for many devices, so from that point of view this can
also be merged separately from omap-for-v4.1/prcm-dts.

* tag 'omap-for-v4.1/prcm-dts-mfd-syscon-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Fix booting with configs that don't have MFD_SYSCON
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull parisc fixes from Helge Deller:
 "The patch by Guenter Roeck fixes the build on parisc which got broken
  because of commit f24ffde4 ("parisc: expose number of page table
  levels on Kconfig level") and the patch from Matthew Wilcox converts
  our code to use the generic scatterlist.h header file"

* 'parisc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Replace PT_NLEVELS with CONFIG_PGTABLE_LEVELS
  parisc: Eliminate sg_virt_addr() and private scatterlist.h

Currently we parse max_msg_sz from the wrong offset in QUERY_DEV_CAP,
fix to use the right offset.

Fixes: 0b131561 ('net/mlx4_en: Add Flow control statistics [..]')
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>