- 02 May, 2019 40 commits
-
-
Christophe Leroy authored
Reduce #ifdef mess by defining a helper to print hash info at startup. In the meantime, remove the display of hash table address to reduce leak of non necessary information. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Christophe Leroy authored
Due to %p, (ptrval) is printed in lieu of the hash table address. showing the hash table address isn't an operationnal need so just don't print it. Signed-off-by:
-
Christophe Leroy authored
Hash_end has never been used, drop it. Signed-off-by:
-
Christophe Leroy authored
For hash32, the zero shadow page gets mapped with PAGE_READONLY instead of PAGE_KERNEL_RO, because the PP bits don't provide a RO kernel, so PAGE_KERNEL_RO is equivalent to PAGE_KERNEL. By using PAGE_READONLY, the page is RO for both kernel and user, but this is not a security issue as it contains only zeroes. Signed-off-by:
-
Christophe Leroy authored
KASAN requires early activation of hash table, before memblock() functions are available. This patch implements an early hash_table statically defined in __initdata. During early boot, a single page table is used. For hash32, when doing the final init, one page table is allocated for each PGD entry because of the _PAGE_HASHPTE flag which can't be common to several virt pages. This is done after memblock get available but before switching to the final hash table, otherwise there are issues with TLB flushing due to the shared entries. Signed-off-by:
-
Christophe Leroy authored
For KASAN, hash table handling will be activated early for accessing to KASAN shadow areas. In order to avoid any modification of the hash functions while they are still used with the early hash table, the code patching is moved out of MMU_init_hw() and put close to the big-bang switch to the final hash table. Signed-off-by:
-
Christophe Leroy authored
This patch adds KASAN support for PPC32. The following patch will add an early activation of hash table for book3s. Until then, a warning will be raised if trying to use KASAN on an hash 6xx. To support KASAN, this patch initialises that MMU mapings for accessing to the KASAN shadow area defined in a previous patch. An early mapping is set as soon as the kernel code has been relocated at its definitive place. Then the definitive mapping is set once paging is initialised. For modules, the shadow area is allocated at module_alloc(). Signed-off-by:
-
Christophe Leroy authored
All files containing functions run before kasan_early_init() is called must have KASAN instrumentation disabled. For those file, branch profiling also have to be disabled otherwise each if () generates a call to ftrace_likely_update(). Signed-off-by:
-
Christophe Leroy authored
This patch prepares a shadow area for KASAN. The shadow area will be at the top of the kernel virtual memory space above the fixmap area and will occupy one eighth of the total kernel virtual memory space. Signed-off-by:
-
Christophe Leroy authored
When we add KASAN shadow area, KVIRT_TOP can't be anymore fixed at 0xfe000000. This patch uses FIXADDR_START to define KVIRT_TOP. Signed-off-by:
-
Christophe Leroy authored
Since commit 400c47d8 ("powerpc32: memset: only use dcbz once cache is enabled"), memset() can be used before activation of the cache, so no need to use memset_io() for zeroing the BSS. Acked-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Christophe Leroy authored
In kernel/cputable.c, explicitly use memcpy() instead of *y = *x; This will allow GCC to replace it with __memcpy() when KASAN is selected. Acked-by:
-
Christophe Leroy authored
When KASAN is active, the string functions in lib/ are doing the KASAN checks. This is too early for prom_init. This patch implements dedicated string functions for prom_init, which will be compiled in with KASAN disabled. Size of prom_init before the patch: text data bss dec hex filename 12060 488 6960 19508 4c34 arch/powerpc/kernel/prom_init.o Size of prom_init after the patch: text data bss dec hex filename 12460 488 6960 19908 4dc4 arch/powerpc/kernel/prom_init.o This increases the size of prom_init a bit, but as prom_init is in __init section, it is freed after boot anyway. Signed-off-by:
-
Christophe Leroy authored
This patch makes CONFIG_CMDLINE defined at all time. It avoids having to enclose related code inside #ifdef CONFIG_CMDLINE Signed-off-by:
-
Christophe Leroy authored
CONFIG_KASAN implements wrappers for memcpy() memmove() and memset() Those wrappers are doing the verification then call respectively __memcpy() __memmove() and __memset(). The arches are therefore expected to rename their optimised functions that way. For files on which KASAN is inhibited, #defines are used to allow them to directly call optimised versions of the functions without going through the KASAN wrappers. See commit 393f203f ("x86_64: kasan: add interceptors for memset/memmove/memcpy functions") for details. Other string / mem functions do not (yet) have kasan wrappers, we therefore have to fallback to the generic versions when KASAN is active, otherwise KASAN checks will be skipped. Signed-off-by:
-
Christophe Leroy authored
In preparation of KASAN, move early_init() into a separate file in order to allow deactivation of KASAN for that function. Signed-off-by:
-
Christophe Leroy authored
pgd_alloc() and pgd_free() are identical on nohash 32 and 64. Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
Christophe Leroy authored
pmd_pgtable() is identical on the 4 subarches, refactor it. Reviewed-by:
-
Christophe Leroy authored
pgtable_free() and others are identical on nohash/32 and 64, so move them into asm/nohash/pgalloc.h Reviewed-by:
-
Christophe Leroy authored
Use IS_ENABLED(CONFIG_BOOKE) to make single versions of pmd_populate() and pmd_populate_kernel() Reviewed-by:
-
Christophe Leroy authored
pgtable_cache[] is the same for the 4 subarches, lets make it common. Reviewed-by:
-
Christophe Leroy authored
Functions pte_alloc_one(), pte_alloc_one_kernel(), pte_free(), pte_free_kernel() are identical for the four subarches. This patch moves their definition in a common place. Reviewed-by:
-
Christophe Leroy authored
pte_alloc_one_kernel() and pte_alloc_one() are simple calls to pte_fragment_alloc(), so they are good candidates for inlining as already done on PPC64. Reviewed-by:
-
Christophe Leroy authored
In the same way as PPC64, implement early allocation functions and avoid calling pte_alloc_kernel() before slab is available. Reviewed-by:
-
Christophe Leroy authored
early_alloc_pgtable() is only used during init. Reviewed-by:
-
Christophe Leroy authored
Lets select PPC_MM_SLICES from the subarch config item instead of doing it via defaults declaration in the PPC_MM_SLICES item itself. Reviewed-by:
-
Christophe Leroy authored
Those files have no real added values, especially the 64 bit which only includes the common book3e mmu.h which is also included from 32 bits side. So lets do the final inclusion directly from nohash/mmu.h Reviewed-by:
-
Christophe Leroy authored
pgtable_t is now identical for all subarches, move it to the top level asm/mmu.h Reviewed-by:
-
Christophe Leroy authored
Book3E 64 is the only subarch not using pte_fragment. In order to allow refactorisation, this patch converts it to pte_fragment. Reviewed-by:
-
Christophe Leroy authored
This has never been called (since Kernel has been in git at least), drop it. Reviewed-by:
-
Christophe Leroy authored
__find_linux_pte() is full of if/else which is hard to follow allthough the handling is pretty simple. Previous patches left a { } block. This patch removes it. Signed-off-by: -
Christophe Leroy authored
__find_linux_pte() is full of if/else which is hard to follow allthough the handling is pretty simple. Previous patch left { } blocks. This patch removes the first one by shifting its content to the left. Signed-off-by: -
Christophe Leroy authored
__find_linux_pte() is full of if/else which is hard to follow allthough the handling is pretty simple. This patch flattens the function by getting rid of as much if/else as possible. In order to ease the review, this is done in three steps. Signed-off-by:
-
Christophe Leroy authored
Only 3 subarches support huge pages. So when it is either 2 of them, it is not the third one. And mmu_has_feature() is known by all subarches so IS_ENABLED() can be used instead of #ifdef Signed-off-by:
-
Christophe Leroy authored
Only book3s/64 may select default among several HPAGE_SHIFT at runtime. 8xx always defines 512K pages as default FSL_BOOK3E always defines 4M pages as default This patch limits HUGETLB_PAGE_SIZE_VARIABLE to book3s/64 moves the definitions in subarches files. Signed-off-by:
-
Christophe Leroy authored
No need to have this in asm/page.h, move it into asm/hugetlb.h Signed-off-by:
-
Christophe Leroy authored
Introduce a subarch specific helper check_and_get_huge_psize() to check the huge page sizes and cleanup the ifdef mess in add_huge_page_size() Signed-off-by:
-
Christophe Leroy authored
This patchs adds a subarch helper to populate hugepd. Signed-off-by:
-
Christophe Leroy authored
Three subarches support hugepages: - fsl book3e - book3s/64 - 8xx This patch splits asm/hugetlb.h to reduce the #ifdef mess. Signed-off-by:
-
Christophe Leroy authored
gup_huge_pd() is the only user of gup_hugepte() and it is located in the same file. This patch moves gup_huge_pd() after gup_hugepte() and makes gup_hugepte() static. Signed-off-by:
-
