- 25 Jun, 2008 10 commits
-
-
Jesse Barnes authored
If pci_request_region fails, make the warning include the resource number, not the resource number + 1.
-
Bjorn Helgaas authored
Convert printks to use dev_printk(). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Bjorn Helgaas authored
Convert printks to use dev_printk(). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Bjorn Helgaas authored
Convert printks to use dev_printk(). I converted pr_debug() to dev_dbg(). Both use KERN_DEBUG and are enabled only when DEBUG is defined. I converted printk(KERN_DEBUG) to dev_printk(KERN_DEBUG), not to dev_dbg(), because dev_dbg() is only enabled when DEBUG is defined. I converted DBG(KERN_INFO) (only in setup-bus.c) to dev_info(). The DBG() name makes it sound like debug, but it's been enabled forever, so dev_info() preserves the previous behavior. I tried to make the resource assignment formats more consistent, e.g., "BAR %d: got res [%#llx-%#llx] bus [%#llx-%#llx] flags %#lx\n" instead of sometimes using "start-end" and sometimes using "size@start". I'm not attached to one or the other; I'd just like them consistent. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Kenji Kaneshige authored
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Kenji Kaneshige authored
The pcie_poll_cmd() and pcie_wait_cmd() are too large to be inlined. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Kenji Kaneshige authored
Change command polling frequency to 100Hz from 10Hz in order to reduce the delay in the common case of a command completing quickly. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Kenji Kaneshige authored
Cleanup pcie_poll_cmd(): check the slot status once before entering our completion test loop and convert the loop to a simpler while() block. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Kenji Kaneshige authored
Fix the typo in hpc_release_ctlr(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Jesse Barnes authored
A few warnings snuck in as parameters were added or renamed. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
- 16 Jun, 2008 1 commit
-
-
Jesse Barnes authored
On x86, we do early PCI probing to apply some quirks for chipset bugs. However, in a recent cleanup (7bcbc78d) a thinko was introduced that causes us to probe all subfunctions of even single function devices (a function was factored out of an inner loop and a "break" became a "return"). Fix that up by making check_dev_quirk() return a value so we can keep the factored code intact. Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
- 12 Jun, 2008 2 commits
-
-
Rafael J. Wysocki authored
ACPI PM: Add possibility to change suspend sequence There are some systems out there that don't work correctly with our current suspend/hibernation code ordering. Provide a workaround for these systems allowing them to pass 'acpi_sleep=old_ordering' in the kernel command line so that it will use the pre-ACPI 2.0 ("old") suspend code ordering. Unfortunately, this requires us to add a platform hook to the resuming of devices for recovering the platform in case one of the device drivers' .suspend() routines returns error code. Namely, ACPI 1.0 specifies that _PTS should be called before suspending devices, but _WAK still should be called before resuming them in order to undo the changes made by _PTS. However, if there is an error during suspending devices, they are automatically resumed without returning control to the PM core, so the _WAK has to be called from within device_resume() in that cases. The patch also reorders and refactors the ACPI suspend/hibernation code to avoid duplication as far as reasonably possible. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Jesse Barnes authored
Merge branch 'suspend' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 into linux-next
-
- 11 Jun, 2008 3 commits
-
-
Rafael J. Wysocki authored
Remove the obsolete workaround for a Toshiba Satellite 4030cdt S1 problem from drivers/acpi/sleep/main.c . Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
-
Rafael J. Wysocki authored
Since the second argument of acpi_pci_choose_state() and platform_pci_choose_state() is never used, remove it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
-
David Brownell authored
Get rid of a superfluous acpi_pm_device_sleep_state() parameter. The only legitimate value of that parameter must be derived from the first parameter, which is what all the callers already do. (However, this does not address the fact that ACPI still doesn't set up those flags.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
-
- 10 Jun, 2008 24 commits
-
-
Alex Chiang authored
Detect all physical PCI slots as described by ACPI, and create entries in /sys/bus/pci/slots/. Not all physical slots are hotpluggable, and the acpiphp module does not detect them. Now we know the physical PCI geography of our system, without caring about hotplug. [kaneshige.kenji@jp.fujitsu.com: export-kobject_rename-for-pci_hotplug_core] Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Greg KH <greg@kroah.com> [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix build with CONFIG_DMI=n] Signed-off-by: Alex Chiang <achiang@hp.com> Cc: Greg KH <greg@kroah.com> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Len Brown <lenb@kernel.org> Acked-by: Len Brown <len.brown@intel.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Alex Chiang authored
Currently, /sys/bus/pci/slots/ only exposes hotplug attributes when a hotplug driver is loaded, but PCI slots have attributes such as address, speed, width, etc. that are not related to hotplug at all. Introduce pci_slot as the primary data structure and kobject model. Hotplug attributes described in hotplug_slot become a secondary structure associated with the pci_slot. This patch only creates the infrastructure that allows the separation of PCI slot attributes and hotplug attributes. In this patch, the PCI hotplug core remains the only user of this infrastructure, and thus, /sys/bus/pci/slots/ will still only become populated when a hotplug driver is loaded. A later patch in this series will add a second user of this new infrastructure and demonstrate splitting the task of exposing pci_slot attributes from hotplug_slot attributes. - Make pci_slot the primary sysfs entity. hotplug_slot becomes a subsidiary structure. o pci_create_slot() creates and registers a slot with the PCI core o pci_slot_add_hotplug() gives it hotplug capability - Change the prototype of pci_hp_register() to take the bus and slot number (on parent bus) as parameters. - Remove all the ->get_address methods since this functionality is now handled by pci_slot directly. [achiang@hp.com: rpaphp-correctly-pci_hp_register-for-empty-pci-slots] Tested-by: Badari Pulavarty <pbadari@us.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: make headers_check happy] [akpm@linux-foundation.org: nuther build fix] [akpm@linux-foundation.org: fix typo in #include] Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Matthew Wilcox <matthew@wil.cx> Cc: Greg KH <greg@kroah.com> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Len Brown <lenb@kernel.org> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Alex Chiang authored
Register one slot per slot, rather than one slot per function. Change the name of the slot to fake%d instead of the pci address. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Matthew Wilcox <matthew@wil.cx> Cc: Greg KH <greg@kroah.com> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Jesse Barnes authored
Just concentrate PCI traffic at linux-pci@vger rather than splitting it between vger and a sf.net moderated (!) mailing list. Acked-by: Matthew Wilcox <willy@linux.intel.com> Acked-by: Scott Murray <scottm@somanetworks.com> Acked-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: fix BLK_DEV_HD_ONLY on ARM dependencies ide: export ide_doubler palm_bk3710: add warm-plug support delkin_cb: add missing __init/__exit tags delkin_cb: add warm-plug support delkin_cb: use struct ide_port_info delkin_cb: set proper hwif->gendev.parent value ide: fix host drivers missing hwif->chipset initialization ide-generic: add missing hwif->chipset setup sis5513: add missing pci_enable_device() call MAINTAINERS: remove SIS 5513 IDE entry ide: remove the ide_etrax100 chipset type
-
Krzysztof Helt authored
This patch unhides the SMBus on Compaq Deskpro EN SFF P667 with the Intel 815E chipset. Unhiding it reveals a THMC51 hardware monitoring chip. Jean Delvare has checked that this machine has no ACPI magic touching the SMBus nor the hardware monitoring chip, so this should be safe. The patch was tested on Fedora Core 9 with 2.6.25.4 kernel. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Tested-by: Rafał Haładuda <rh1985@wp.pl> CC: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Adrian Bunk authored
This patch limits BLK_DEV_HD_ONLY to the ARM platforms offering IRQ_HARDDISK, fixing the following compile error on others: <-- snip --> ... CC drivers/ide/legacy/hd.o ... /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c: In function 'hd_times_out': /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:542: error: 'IRQ_HARDDISK' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:542: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:542: error: for each function it appears in.) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c: In function 'do_hd_request': /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:661: error: 'IRQ_HARDDISK' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c: In function 'hd_init': /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:765: error: 'IRQ_HARDDISK' undeclared (first use in this function) make[3]: *** [drivers/ide/legacy/hd.o] Error 1 <-- snip --> Reported-by: Adrian Bunk <bunk@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Adrian Bunk authored
This patch fixes the following build error: <-- snip --> ... Building modules, stage 2. MODPOST 1204 modules ERROR: "ide_doubler" [drivers/ide/ide-core.ko] undefined! ... make[2]: *** [__modpost] Error 1 <-- snip --> Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Don't fail the probe if there are no devices attached to the controller. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Don't fail the probe if there are no devices attached to the controller. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Convert the driver to use struct ide_port_info - as a nice side-effect this fixes racy setup of ->io_32bit/unmask settings (after ide_device_add() call device can be already in use). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
hwif->dev was set too late (after ide_device_add() call) so hwif->gendev.parent was not initialized properly. Fix it by setting hw.dev and letting ide_init_port_hw() do the rest. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
ide_find_port() now depends on ->chipset being set for occupied ide_hwifs[] slots so all host drivers have to initialize hwif->chipset properly. This patch fixes a regression on hosts with > 1 port or with a single port but no devices attached to it for an affected host drivers. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
hwif->chipset need to be set properly or ide-generic driver will break once we make a final step in fixing host drivers' dependence on ide_hwifs[]. Problem was catched early thanks to IDE tree exposure in -mm / -next trees and reported by people listed people (thank you guys!). Reported-by: "John Keller" <jpk@sgi.com> Reported-by: Dmitri Vorobiev <dmitri.vorobiev@gmail.com> Reported-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Cc: Riccardo Gori <goric@trivenet.it> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Adrian Bunk authored
- maintainer has not been active for years - URLs no longer exist - covered by the IDE SUBSYSTEM entry - maintainer email bounces Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Lionel.Bouton@inet6.fr Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Adrian Bunk authored
I forgot to remove the ide_etrax100 chipset type when removing the ETRAX_IDE driver. Reported-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Alex Chiang authored
While refreshing my physical PCI slot series against upstream, I noticed a few simple sparse/compile warnings that were easy to fix. Fix the following sparse warnings in PCIe: drivers/pci/pcie/aer/aerdrv.c:86:6: warning: symbol 'pci_no_aer' was not declared. Should it be static? drivers/pci/pcie/portdrv_bus.c:21:17: warning: symbol 'pcie_port_bus_type' was not declared. Should it be static? Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Jean Delvare authored
One more machine with a hidden Intel SMBus. Unhiding it reveals a SMSC EMC6D100 hardware monitoring chip. I have checked that this machine has no ACPI magic touching the SMBus nor the hardware monitoring chip, so this should be safe. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Julia Lawall authored
The destination of goto error also does a kfree(g_iommus), so it is not correct to do one here. This was found using Coccinelle (http://www.emn.fr/x-info/coccinelle/). Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Kenji Kaneshige authored
Cleanup to remove a redundant NULL write to SLOTSTATUS. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Kenji Kaneshige authored
Fixup a typo in dbg_ctrl(); it was fetching SLOTSTATUS twice. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-
Kenji Kaneshige authored
Fix the following problems of shpchp driver about getting hotplug control from firmware. - The shpchp driver must not control the hotplug controller if it fails to get control from the firmware. But current shpchp controls the hotplug controller regardless the result, because it doesn't check the return value of get_hp_hw_control_from_firmware(). - Current shpchp driver doesn't support _OSC. The pciehp driver already have the code for evaluating _OSC and OSHP and shpchp and pciehp can share it. So this patch move that code from pciehp to acpi_pcihp.c. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
-