Skip to content

L
linux
Switch branch/tag
  1. 04 Nov, 2017 1 commit
  3. 03 Nov, 2017 27 commits
  5. 02 Nov, 2017 12 commits
    • Madhavan Srinivasan's avatar
      powerpc/perf: Fix core-imc hotplug callback failure during imc initialization · 7ecb37f6
      Madhavan Srinivasan authored 
      Call trace observed during boot:

  nest_capp0_imc performance monitor hardware support registered
  nest_capp1_imc performance monitor hardware support registered
  core_imc memory allocation for cpu 56 failed
  Unable to handle kernel paging request for data at address 0xffa400010
  Faulting instruction address: 0xc000000000bf3294
  0:mon> e
  cpu 0x0: Vector: 300 (Data Access) at [c000000ff38ff8d0]
      pc: c000000000bf3294: mutex_lock+0x34/0x90
      lr: c000000000bf3288: mutex_lock+0x28/0x90
      sp: c000000ff38ffb50
     msr: 9000000002009033
     dar: ffa400010
   dsisr: 80000
    current = 0xc000000ff383de00
    paca    = 0xc000000007ae0000	 softe: 0	 irq_happened: 0x01
      pid   = 13, comm = cpuhp/0
  Linux version 4.11.0-39.el7a.ppc64le (mockbuild@ppc-058.build.eng.bos.redhat.com) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-16) (GCC) ) #1 SMP Tue Oct 3 07:42:44 EDT 2017
  0:mon> t
  [c000000ff38ffb80] c0000000002ddfac perf_pmu_migrate_context+0xac/0x470
  [c000000ff38ffc40] c00000000011385c ppc_core_imc_cpu_offline+0x1ac/0x1e0
  [c000000ff38ffc90] c000000000125758 cpuhp_invoke_callback+0x198/0x5d0
  [c000000ff38ffd00] c00000000012782c cpuhp_thread_fun+0x8c/0x3d0
  [c000000ff38ffd60] c0000000001678d0 smpboot_thread_fn+0x290/0x2a0
  [c000000ff38ffdc0] c00000000015ee78 kthread+0x168/0x1b0
  [c000000ff38ffe30] c00000000000b368 ret_from_kernel_thread+0x5c/0x74

While registering the cpuhoplug callbacks for core-imc, if we fails
in the cpuhotplug online path for any random core (either because opal call to
initialize the core-imc counters fails or because memory allocation fails for
that core), ppc_core_imc_cpu_offline() will get invoked for other cpus who
successfully returned from cpuhotplug online path.

But in the ppc_core_imc_cpu_offline() path we are trying to migrate the event
context, when core-imc counters are not even initialized. Thus creating the
above stack dump.

Add a check to see if core-imc counters are enabled or not in the cpuhotplug
offline path before migrating the context to handle this failing scenario.

Fixes: 885dcd70 ("powerpc/perf: Add nest IMC PMU support")
Signed-off-by: default avatarMadhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: default avatarAnju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      7ecb37f6
    • Linus Torvalds's avatar
      Kbuild: don't pass "-C" to preprocessor when processing linker scripts · 5cb0512c
      Linus Torvalds authored 
      For some odd historical reason, we preprocessed the linker scripts with
"-C", which keeps comments around.  That makes no sense, since the
comments are not meaningful for the build anyway.

And it actually breaks things, since linker scripts can't have C++ style
"//" comments in them, so keeping comments after preprocessing now
limits us in odd and surprising ways in our header files for no good
reason.

The -C option goes back to pre-git and pre-bitkeeper times, but seems to
have been historically used (along with "-traditional") for some
odd-ball architectures (ia64, MIPS and SH).  It probably didn't matter
back then either, but might possibly have been used to minimize the
difference between the original file and the pre-processed result.

The reason for this may be lost in time, but let's not perpetuate it
only because we can't remember why we did this crazy thing.

This was triggered by the recent addition of SPDX lines to the source
tree, where people apparently were confused about why header files
couldn't use the C++ comment format.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      5cb0512c
    • Linus Torvalds's avatar
      Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"" · 890da9cf
      Linus Torvalds authored 
      This reverts commit 51204e06.

There wasn't really any good reason for it, and people are complaining
(rightly) that it broke existing practice.

Cc: Len Brown <len.brown@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      890da9cf
    • Linus Torvalds's avatar
      Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux · 6daa0839
      Linus Torvalds authored 
      Pull arm64 fix from Catalin Marinas:
 "Check addr_limit in arm64 __dump_instr()"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: ensure __dump_instr() checks addr_limit
      6daa0839
    • Mark Rutland's avatar
      arm64: ensure __dump_instr() checks addr_limit · 7a7003b1
      Mark Rutland authored 
      It's possible for a user to deliberately trigger __dump_instr with a
chosen kernel address.

Let's avoid problems resulting from this by using get_user() rather than
__get_user(), ensuring that we don't erroneously access kernel memory.

Where we use __dump_instr() on kernel text, we already switch to
KERNEL_DS, so this shouldn't adversely affect those cases.

Fixes: 60ffc30d ("arm64: Exception handling")
Cc: stable@vger.kernel.org
Acked-by: default avatarWill Deacon <will.deacon@arm.com>
Signed-off-by: default avatarMark Rutland <mark.rutland@arm.com>
Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
      7a7003b1
    • Linus Torvalds's avatar
      Merge tag 'spdx_identifiers-4.14-rc8' of... · ead75150
      Linus Torvalds authored 
      Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull initial SPDX identifiers from Greg KH:
 "License cleanup: add SPDX license identifiers to some files

  Many source files in the tree are missing licensing information, which
  makes it harder for compliance tools to determine the correct license.

  By default all files without license information are under the default
  license of the kernel, which is GPL version 2.

  Update the files which contain no license information with the
  'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
  binding shorthand, which can be used instead of the full boiler plate
  text.

  This patch is based on work done by Thomas Gleixner and Kate Stewart
  and Philippe Ombredanne.

  How this work was done:

  Patches were generated and checked against linux-4.14-rc6 for a subset
  of the use cases:

   - file had no licensing information it it.

   - file was a */uapi/* one with no licensing information in it,

   - file was a */uapi/* one with existing licensing information,

  Further patches will be generated in subsequent months to fix up cases
  where non-standard license headers were used, and references to
  license had to be inferred by heuristics based on keywords.

  The analysis to determine which SPDX License Identifier to be applied
  to a file was done in a spreadsheet of side by side results from of
  the output of two independent scanners (ScanCode & Windriver)
  producing SPDX tag:value files created by Philippe Ombredanne.
  Philippe prepared the base worksheet, and did an initial spot review
  of a few 1000 files.

  The 4.13 kernel was the starting point of the analysis with 60,537
  files assessed. Kate Stewart did a file by file comparison of the
  scanner results in the spreadsheet to determine which SPDX license
  identifier(s) to be applied to the file. She confirmed any
  determination that was not immediately clear with lawyers working with
  the Linux Foundation.

  Criteria used to select files for SPDX license identifier tagging was:

   - Files considered eligible had to be source code files.

   - Make and config files were included as candidates if they contained
     >5 lines of source

   - File already had some variant of a license header in it (even if <5
     lines).

  All documentation files were explicitly excluded.

  The following heuristics were used to determine which SPDX license
  identifiers to apply.

   - when both scanners couldn't find any license traces, file was
     considered to have no license information in it, and the top level
     COPYING file license applied.

     For non */uapi/* files that summary was:

       SPDX license identifier                            # files
       ---------------------------------------------------|-------
       GPL-2.0                                              11139

     and resulted in the first patch in this series.

     If that file was a */uapi/* path one, it was "GPL-2.0 WITH
     Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
     was:

       SPDX license identifier                            # files
       ---------------------------------------------------|-------
       GPL-2.0 WITH Linux-syscall-note                        930

     and resulted in the second patch in this series.

   - if a file had some form of licensing information in it, and was one
     of the */uapi/* ones, it was denoted with the Linux-syscall-note if
     any GPL family license was found in the file or had no licensing in
     it (per prior point). Results summary:

       SPDX license identifier                            # files
       ---------------------------------------------------|------
       GPL-2.0 WITH Linux-syscall-note                       270
       GPL-2.0+ WITH Linux-syscall-note                      169
       ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
       ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
       LGPL-2.1+ WITH Linux-syscall-note                      15
       GPL-1.0+ WITH Linux-syscall-note                       14
       ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
       LGPL-2.0+ WITH Linux-syscall-note                       4
       LGPL-2.1 WITH Linux-syscall-note                        3
       ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
       ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

     and that resulted in the third patch in this series.

   - when the two scanners agreed on the detected license(s), that
     became the concluded license(s).

   - when there was disagreement between the two scanners (one detected
     a license but the other didn't, or they both detected different
     licenses) a manual inspection of the file occurred.

   - In most cases a manual inspection of the information in the file
     resulted in a clear resolution of the license that should apply
     (and which scanner probably needed to revisit its heuristics).

   - When it was not immediately clear, the license identifier was
     confirmed with lawyers working with the Linux Foundation.

   - If there was any question as to the appropriate license identifier,
     the file was flagged for further research and to be revisited later
     in time.

  In total, over 70 hours of logged manual review was done on the
  spreadsheet to determine the SPDX license identifiers to apply to the
  source files by Kate, Philippe, Thomas and, in some cases,
  confirmation by lawyers working with the Linux Foundation.

  Kate also obtained a third independent scan of the 4.13 code base from
  FOSSology, and compared selected files where the other two scanners
  disagreed against that SPDX file, to see if there was new insights.
  The Windriver scanner is based on an older version of FOSSology in
  part, so they are related.

  Thomas did random spot checks in about 500 files from the spreadsheets
  for the uapi headers and agreed with SPDX license identifier in the
  files he inspected. For the non-uapi files Thomas did random spot
  checks in about 15000 files.

  In initial set of patches against 4.14-rc6, 3 files were found to have
  copy/paste license identifier errors, and have been fixed to reflect
  the correct identifier.

  Additionally Philippe spent 10 hours this week doing a detailed manual
  inspection and review of the 12,461 patched files from the initial
  patch version early this week with:

   - a full scancode scan run, collecting the matched texts, detected
     license ids and scores

   - reviewing anything where there was a license detected (about 500+
     files) to ensure that the applied SPDX license was correct

   - reviewing anything where there was no detection but the patch
     license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
     applied SPDX license was correct

  This produced a worksheet with 20 files needing minor correction. This
  worksheet was then exported into 3 different .csv files for the
  different types of files to be modified.

  These .csv files were then reviewed by Greg. Thomas wrote a script to
  parse the csv files and add the proper SPDX tag to the file, in the
  format that the file expected. This script was further refined by Greg
  based on the output to detect more types of files automatically and to
  distinguish between header and source .c files (which need different
  comment types.) Finally Greg ran the script using the .csv files to
  generate the patches.
Reviewed-by: default avatarKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: default avatarPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: default avatarThomas Gleixner <tglx@linutronix.de>
  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  License cleanup: add SPDX license identifier to uapi header files with a license
  License cleanup: add SPDX license identifier to uapi header files with no license
  License cleanup: add SPDX GPL-2.0 license identifier to files with no license
      ead75150
    • Linus Torvalds's avatar
      Merge tag 'linux-kselftest-4.14-rc7' of... · fdebad11
      Linus Torvalds authored 
      Merge tag 'linux-kselftest-4.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fix from Shuah Khan:
 "This consists of a single fix to a regression to printing individual
  test results to the console. An earlier commit changed it to printing
  just the summary of results, which will negatively impact users that
  rely on console log to look at the individual test failures.

  This fix makes it optional to print summary and by default results get
  printed to the console"

* tag 'linux-kselftest-4.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: lib.mk: print individual test results to console by default
      fdebad11
    • Linus Torvalds's avatar
      Merge tag 'sound-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound · 0f07e10f
      Linus Torvalds authored 
      Pull sound fixes from Takashi Iwai:
 "Unfortunately we still have received a significant amount of changes
  at the late stage, but at least all are small and clear fixes.

  There are two fixes for ALSA core stuff, yet another timer race fix
  and sequencer lockdep annotation fix. Both are spotted by syzkaller,
  and not too serious but better to paper over quickly.

  All other commits are about ASoC drivers, most notably, a revert of
  RT5514 hotword control that was included in 4.14-rc (due to a kind of
  abuse of kctl TLV ABI), together with topology API fixes and other
  device-specific small fixes that should go for stable, too"

* tag 'sound-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: seq: Fix nested rwsem annotation for lockdep splat
  ALSA: timer: Add missing mutex lock for compat ioctls
  ASoC: rt5616: fix 0x91 default value
  ASoC: rt5659: connect LOUT Amp with Charge Pump
  ASoC: rt5659: register power bit of LOUT Amp
  ASoC: rt5663: Change the dev getting function in rt5663_irq
  ASoC: rt5514: Revert Hotword Model control
  ASoC: topology: Fix a potential memory leak in 'soc_tplg_dapm_widget_denum_create()'
  ASoC: topology: Fix a potential NULL pointer dereference in 'soc_tplg_dapm_widget_denum_create()'
  ASoC: rt5514-spi: check irq status to schedule data copy
  ASoC: adau17x1: Workaround for noise bug in ADC
      0f07e10f
    • Linus Torvalds's avatar
      Merge branch 'fixes-v4.14-rc7' of... · 6965f1aa
      Linus Torvalds authored 
      Merge branch 'fixes-v4.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security

Pull key handling fixes from James Morris:
 "Fixes for the Keys subsystem by Eric Biggers"

* 'fixes-v4.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  KEYS: fix out-of-bounds read during ASN.1 parsing
  KEYS: trusted: fix writing past end of buffer in trusted_read()
  KEYS: return full count in keyring_read() if buffer is too small
      6965f1aa
    • Jiri Slaby's avatar
      futex: futex_wake_op, do not fail on invalid op · e78c38f6
      Jiri Slaby authored 
      In commit 30d6e0a4 ("futex: Remove duplicated code and fix undefined
behaviour"), I let FUTEX_WAKE_OP to fail on invalid op.  Namely when op
should be considered as shift and the shift is out of range (< 0 or > 31).

But strace's test suite does this madness:

  futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xa0caffee);
  futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xbadfaced);
  futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xffffffff);

When I pick the first 0xa0caffee, it decodes as:

  0x80000000 & 0xa0caffee: oparg is shift
  0x70000000 & 0xa0caffee: op is FUTEX_OP_OR
  0x0f000000 & 0xa0caffee: cmp is FUTEX_OP_CMP_EQ
  0x00fff000 & 0xa0caffee: oparg is sign-extended 0xcaf = -849
  0x00000fff & 0xa0caffee: cmparg is sign-extended 0xfee = -18

That means the op tries to do this:

  (futex |= (1 << (-849))) == -18

which is completely bogus. The new check of op in the code is:

        if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) {
                if (oparg < 0 || oparg > 31)
                        return -EINVAL;
                oparg = 1 << oparg;
        }

which results obviously in the "Invalid argument" errno:

  FAIL: futex
  ===========

  futex(0x7fabd78bcffc, 0x5, 0xfacefeed, 0xb, 0x7fabd78bcffc, 0xa0caffee) = -1: Invalid argument
  futex.test: failed test: ../futex failed with code 1

So let us soften the failure to print only a (ratelimited) message, crop
the value and continue as if it were right.  When userspace keeps up, we
can switch this to return -EINVAL again.

[v2] Do not return 0 immediatelly, proceed with the cropped value.

Fixes: 30d6e0a4 ("futex: Remove duplicated code and fix undefined behaviour")
Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <dvhart@infradead.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e78c38f6
    • Greg Kroah-Hartman's avatar
      License cleanup: add SPDX license identifier to uapi header files with a license · e2be04c7
      Greg Kroah-Hartman authored 
      Many user space API headers have licensing information, which is either
incomplete, badly formatted or just a shorthand for referring to the
license under which the file is supposed to be.  This makes it hard for
compliance tools to determine the correct license.

Update these files with an SPDX license identifier.  The identifier was
chosen based on the license information in the file.

GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license
identifier with the added 'WITH Linux-syscall-note' exception, which is
the officially assigned exception identifier for the kernel syscall
exception:

   NOTE! This copyright does *not* cover user programs that use kernel
   services by normal system calls - this is merely considered normal use
   of the kernel, and does *not* fall under the heading of "derived work".

This exception makes it possible to include GPL headers into non GPL
code, without confusing license compliance tools.

Headers which have either explicit dual licensing or are just licensed
under a non GPL license are updated with the corresponding SPDX
identifier and the GPLv2 with syscall exception identifier.  The format
is:
        ((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE)

SPDX license identifiers are a legally binding shorthand, which can be
used instead of the full boiler plate text.  The update does not remove
existing license information as this has to be done on a case by case
basis and the copyright holders might have to be consulted. This will
happen in a separate step.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.  See the previous patch in this series for the
methodology of how this patch was researched.
Reviewed-by: default avatarKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: default avatarPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: default avatarThomas Gleixner <tglx@linutronix.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e2be04c7
    • Greg Kroah-Hartman's avatar
      License cleanup: add SPDX license identifier to uapi header files with no license · 6f52b16c
      Greg Kroah-Hartman authored 
      Many user space API headers are missing licensing information, which
makes it hard for compliance tools to determine the correct license.

By default are files without license information under the default
license of the kernel, which is GPLV2.  Marking them GPLV2 would exclude
them from being included in non GPLV2 code, which is obviously not
intended. The user space API headers fall under the syscall exception
which is in the kernels COPYING file:

   NOTE! This copyright does *not* cover user programs that use kernel
   services by normal system calls - this is merely considered normal use
   of the kernel, and does *not* fall under the heading of "derived work".

otherwise syscall usage would not be possible.

Update the files which contain no license information with an SPDX
license identifier.  The chosen identifier is 'GPL-2.0 WITH
Linux-syscall-note' which is the officially assigned identifier for the
Linux syscall exception.  SPDX license identifiers are a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.  See the previous patch in this series for the
methodology of how this patch was researched.
Reviewed-by: default avatarKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: default avatarPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: default avatarThomas Gleixner <tglx@linutronix.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      6f52b16c
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7