- 26 Sep, 2014 1 commit
-
-
Matthias Brugger authored
I plan to stay with the Mediatek SoCs for the next future and hope to expand its support along the way with the help of a whole bunch of people. Signed-off-by:
Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
- 25 Sep, 2014 8 commits
-
-
git://github.com/at91linux/linux-at91Arnd Bergmann authored
Merge tag 'at91-fixes-non-critical' of git://github.com/at91linux/linux-at91 into next/fixes-non-critical Pull "Fixes non critical for AT91" from Nicolas Ferre: - mmc pinmux for at91sam9263 was missing - little fix of the old clock implementation Signed-off-by:
-
Behan Webster authored
The ASM below does not compile with clang and is not the way that the mcr command is used in other parts of the kernel. arch/arm/mach-vt8500/vt8500.c:72:11: error: invalid % escape in inline assembly string asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0)); ~~~~~^~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated. There are other forms that are supported on different ARM instruction sets but generally the kernel just uses mcr as it is supported in all ARM instruction sets. Signed-off-by:Behan Webster <behanw@converseincode.com> Reviewed-by:
Mark Charlebois <charlebm@gmail.com> Acked-by:
Will Deacon <will.deacon@arm.com> Acked-by:
Tony Prisk <linux@prisktech.co.nz> Signed-off-by:
-
Florian Fainelli authored
Add myself as a third maintainer to the mach-bcm code to increase the chances the redundancy in the merging/reviewing process. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Scott Branden <sbranden@broadcom.com> Acked-by:
Brian Norris <computersforpeace@gmail.com> Acked-by:
Matt Porter <mporter@linaro.org> Signed-off-by:
-
Krzysztof Hałasa authored
Max_Read_Request_Size is 3 bits wide, not 2 bits. Also fix the message. Signed-off-by:
Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by:
-
Krzysztof Hałasa authored
Without this patch, each root port and the device connected directly to it seem to be located on a shared (virtual) bus #0. It creates problems with enabling devices (the PCI code doesn't know that the root bridge must be enabled in order to access other devices). The PCIe topology shown by lspci doesn't reflect reality, e.g.: 0000:00:00.0 PCI bridge: Cavium Networks Device 3400 0000:00:01.0 PCI bridge: Texas Instruments XIO2001 PCI Express-to-PCI Bridge 0000:02:... 0001:00:00.0 PCI bridge: Cavium Networks Device 3400 (for the second lane/bus) -+-[0001:00]---00.0-[01]-- \-[0000:00]-+-00.0-[01]-- | ^^^^ root bridge \-01.0-[02]----... ^^^^ first external device With this patch, the first external PCIe device is connected to bus #1 (behind the root bridge). -+-[0001:00]---00.0-[01]-- \-[0000:00]---00.0-[01-02]----------00.0-[02]----... ^^^^ root bridge ^^^^ first external device Signed-off-by: -
Krzysztof Hałasa authored
UARTs on CNS3xxx are 8250-compatible, not AMBA. The base address for UART0 is 0x78000000 (physical) and 0xfb002000 (virtual). Signed-off-by:
-
Carlo Caione authored
I'm going to maintain the platform. Signed-off-by:
Carlo Caione <carlo@caione.org> Signed-off-by:
-
Robert Jarzmik authored
Change pxa active maintainers, and remove more busy people. Remove Eric's tree as it is not accessible anymore. Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Acked-by:
Daniel Mack <zonque@gmail.com> Acked-by:
Eric Miao <eric.y.miao@gmail.com> Acked-by:
Haojian Zhuang <haojian.zhuang@gmail.com> Acked-by:
Russell King <linux@arm.linux.org.uk> Signed-off-by:
-
- 24 Sep, 2014 4 commits
-
-
Ludovic Desroches authored
When introducing support for sama5d3, the write to PMC_PCDR register has been accidentally removed. Reported-by:
Nathalie Cyrille <nathalie.cyrille@atmel.com> Signed-off-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Cc: <stable@vger.kernel.org> # 3.10.x and later
-
Andreas Henriksson authored
As discovered on a custom board similar to at91sam9263ek and basing its devicetree on that one apparently the pin muxing doesn't get set up properly. This was discovered since the custom boards u-boot does funky stuff with the pin muxing and leaved it set to SPI which made the MMC driver not work under Linux. The fix is simply to define the given configuration as the default. This probably worked by pure luck before, but it's better to make the muxing explicitly set. Signed-off-by:
Andreas Henriksson <andreas.henriksson@endian.se> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
git://git.infradead.org/linux-mvebuOlof Johansson authored
Merge "mvebu fixes for v3.17" from Jason Cooper: - kirkwood - final driver cleanup of ARCH_KIRKWOOD removal - fix DT based DSA - mvebu - use BCH ECC for the RN2120 and RN104/2 nand chips * tag 'mvebu-fixes-3.17' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Netgear RN102: Use Hardware BCH ECC ARM: Kirkwood: Fix DT based DSA. ARM: mvebu: Netgear RN2120: Use Hardware BCH ECC ARM: mvebu: Netgear RN104: Use Hardware BCH ECC cpufreq: Remove ARCH_KIRKWOOD dependency watchdog: Remove ARCH_KIRKWOOD dependency rtc: Remove ARCH_KIRKWOOD dependency leds: Remove ARCH_KIRKWOOD dependency thermal: Remove ARCH_KIRKWOOD dependency ata: Remove ARCH_KIRKWOOD dependency cpuidle: kirkwood: Remove ARCH_KIRKWOOD dependency -
Olof Johansson authored
Merge tag 'fixes-v3.18-not-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/fixes-non-critical Merge "non-urgent omap fixes for v3.18 merge window" from Tony Lindgren: Fixes for omaps that were not considered urgent enough for the -rc cycle: - Fixes for .dts files to differentiate panda and beaglebone versions - Powerdomain fixes from Nishant Menon mostly for newer omaps - Fixes for __initconst and of_device_ids const usage * tag 'fixes-v3.18-not-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: make of_device_ids const ARM: omap2: make arrays containing machine compatible strings const ARM: OMAP4+: PM: Use only valid low power state for CPU hotplug ARM: OMAP4+: PM: use only valid low power state for suspend ARM: OMAP4+: PM: Make logic state programmable ARM: OMAP2+: powerdomain: introduce logic for finding valid power domain ARM: OMAP2+: powerdomain: pwrdm_for_each_clkdm iterate only valid clkdms ARM: OMAP5: powerdomain data: fix powerdomain powerstate ARM: OMAP: DRA7: powerdomain data: fix powerdomain powerstate ARM: dts: am335x-bone*: Fix model name and update compatibility information ARM: dts: omap4-panda: Fix model and SoC family details + Linux 3.17-rc3 Signed-off-by:
Olof Johansson <olof@lixom.net>
-
- 14 Sep, 2014 1 commit
-
-
klightspeed@killerwolves.net authored
The bootloader on the Netgear ReadyNAS RN102 uses Hardware BCH ECC (strength = 4), while the pxa3xx NAND driver by default uses Hamming ECC (strength = 1). This patch changes the ECC mode on these machines to match that of the bootloader and of the stock firmware. That way, it is now possible to update the kernel from userland (e.g. using standard tools from mtd-utils package); u-boot will happily load and boot it. Fixes: 92beaccd ("ARM: mvebu: Enable NAND controller in ReadyNAS 102 .dts file") Cc: <stable@vger.kernel.org> #v3.14+ Signed-off-by:
Ben Peddell <klightspeed@killerwolves.net> Acked-by:
Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by:
Arnaud Ebalard <arno@natisbad.org> Link: https://lkml.kernel.org/r/1410339341-3372-1-git-send-email-klightspeed@killerwolves.netSigned-off-by:
Jason Cooper <jason@lakedaemon.net>
-
- 13 Sep, 2014 1 commit
-
-
Andrew Lunn authored
During the conversion of boards to use DT to instantiate Distributed Switch Architecture, nobody volunteered to test. As to be expected, the conversion was flawed. Testers and access to hardware has now become available, and this patch hopefully fixes the problems. dsa,mii-bus must be a phandle to the top level mdio node, not the port specific subnode of the mdio device. dsa,ethernet must be a phandle to the port subnode within the ethernet DT node, not the ethernet node. Don't pinctrl hog the card detect gpio for mvsdio. Rename the .dts files to make it clearer which file is for the Z0 stepping and which for the A0 or later stepping. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Cc: seugene@marvell.com Tested-by:
Eugene Sanivsky <seugene@marvell.com> Fixes: e2eaa339: ("ARM: Kirkwood: convert rd88f6281-setup.c to DT.") Fixes: e7c8f380: ("ARM: kirkwood: Convert mv88f6281gtw_ge switch setup to DT") Cc: <stable@vger.kernel.org> #v3.15+ Link: https://lkml.kernel.org/r/1409592941-22244-1-git-send-email-andrew@lunn.chSigned-off-by:
-
- 11 Sep, 2014 2 commits
-
-
Uwe Kleine-König authored
of_device_ids (i.e. compatible strings and the respective data) are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the non-const function parameters and structs for OMAP2+ as const, too. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Uwe Kleine-König authored
The definition static const char *omap3_boards_compat[] __initconst = { defines a changable array of constant strings. That is you must not do: *omap3_boards_compat[0] = 'f'; but omap3_boards_compat[0] = "another string"; is fine. So the annotation __initconst is wrong and yields a compiler error when other really const variables are added with __initconst. As the struct machine_desc member dt_compat is declared as const char *const *dt_compat; making the arrays const is the better alternative over changing all annotations to __initdata. Signed-off-by:
-
- 10 Sep, 2014 1 commit
-
-
Roland Stigge authored
In the recent change to the reset function API (commit 7b6d864b), the mode argument changed from a char to an enum. lpc23xx_restart() only handles REBOOT_SOFT and REBOOT_HARD, but the new kernel code emits REBOOT_COLD (0) on reboots now which leads to lpc32xx simply not rebooting (but halting). This patch fixes this by just resetting unconditionally as on other platforms (e.g. mach-bcm2835). Pulling lpc32xx_watchdog_reset() into lpc23xx_restart() since the while() in lpc23xx_restart() is part of the procedure anyway and lpc32xx_watchdog_reset() isn't used anywhere else anymore. Signed-off-by:
Roland Stigge <stigge@antcom.de>
-
- 09 Sep, 2014 9 commits
-
-
Arnaud Ebalard authored
The bootloader on the Netgear ReadyNAS RN2120 uses Hardware BCH ECC (strength = 4), while the pxa3xx NAND driver by default uses Hamming ECC (strength = 1). This patch changes the ECC mode on these machines to match that of the bootloader and of the stock firmware. That way, it is now possible to update the kernel from userland (e.g. using standard tools from mtd-utils package); u-boot will happily load and boot it. The issue was initially reported and fixed by Ben Pedell for RN102. The RN2120 shares the same Hynix H27U1G8F2BTR NAND flash and setup. This patch is based on Ben's fix for RN102. Fixes: ad51eddd ("ARM: mvebu: Enable NAND controller in ReadyNAS 2120 .dts file") Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by:
-
Arnaud Ebalard authored
The bootloader on the Netgear ReadyNAS RN104 uses Hardware BCH ECC (strength = 4), while the pxa3xx NAND driver by default uses Hamming ECC (strength = 1). This patch changes the ECC mode on these machines to match that of the bootloader and of the stock firmware. That way, it is now possible to update the kernel from userland (e.g. using standard tools from mtd-utils package); u-boot will happily load and boot it. The issue was initially reported and fixed by Ben Pedell for RN102. The RN104 shares the same Hynix H27U1G8F2BTR NAND flash and setup. This patch is based on Ben's fix for RN102. Fixes: 0373a558 ("ARM: mvebu: Enable NAND controller in ReadyNAS 104 .dts file") Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by:
-
Andrew Lunn authored
mach-kirkwood has been removed, now that kirkwood lives in mach-mvebu. ARCH_MVEBU is sufficient. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Acked-by:
"Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://lkml.kernel.org/r/1409417172-6846-8-git-send-email-andrew@lunn.chSigned-off-by:
-
Andrew Lunn authored
mach-kirkwood has been removed, now that kirkwood lives in mach-mvebu. ARCH_MVEBU is sufficient. Signed-off-by:
-
Andrew Lunn authored
mach-kirkwood has been removed, now that kirkwood lives in mach-mvebu. ARCH_MVEBU is sufficient. Signed-off-by:
-
Andrew Lunn authored
mach-kirkwood has been removed, now that kirkwood lives in mach-mvebu. Use MACH_KIRKWOOD which will be set when kirkwood is built as part of mach-mvebu. Signed-off-by:
Bryan Wu <cooloney@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: linux-leds@vger.kernel.org Link: https://lkml.kernel.org/r/1409417172-6846-5-git-send-email-andrew@lunn.chSigned-off-by:
-
Andrew Lunn authored
mach-kirkwood has been removed, now that kirkwood lives in mach-mvebu. Depend on MACH_KIRKWOOD, which will be set when kirkwood is built as part of ARCH_MVEBU. Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Link: https://lkml.kernel.org/r/1409417172-6846-4-git-send-email-andrew@lunn.chSigned-off-by:
-
Andrew Lunn authored
mach-kirkwood has been removed, now that kirkwood lives in mach-mvebu. ARCH_MVEBU is sufficient. Signed-off-by:
Tejun Heo <tj@kernel.org> Link: https://lkml.kernel.org/r/1409417172-6846-3-git-send-email-andrew@lunn.chSigned-off-by:
-
Andrew Lunn authored
mach-kirkwood has been removed, now that kirkwood lives in mach-mvebu. Use MACH_KIRKWOOD, which is set when kirkwood is built as part of mach-mvebu. Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by:
-
- 08 Sep, 2014 8 commits
-
-
Tony Lindgren authored
Merge branch 'pull/v3.18/powerdomain-fixes' of https://github.com/nmenon/linux-2.6-playground into omap-for-v3.18/fixes-not-urgent
-
Nishanth Menon authored
Not all SoCs support OFF mode - for example DRA74/72. So, use valid power state during CPU hotplug. Signed-off-by:
Nishanth Menon <nm@ti.com> Reviewed-by:
Kevin Hilman <khilman@linaro.org> Acked-by:
Santosh Shilimkar <santosh.shilimkar@ti.com>
-
Nishanth Menon authored
We are using power domain state as RET and logic state as OFF. This state is OSWR. This may not always be supported on ALL power domains. In fact, on certain power domains, this might result in a hang on certain platforms. Instead, depend on powerdomain data to provide accurate information about the supported powerdomain states and use the appropriate function to query and use it as part of suspend path. Signed-off-by:
-
Nishanth Menon authored
Move the logic state as different for each power domain. This allows us to customize the deepest power state we should target over all for each powerdomain in the follow on patches. Signed-off-by:
-
Nishanth Menon authored
powerdomain configuration in OMAP is done using PWRSTCTRL register for each power domain. However, PRCM lets us write any value we'd like to the logic and power domain target states, however the SoC integration tends to actually function only at a few discrete states. These valid states are already in our powerdomains_xxx_data.c file. So, provide a function to easily query valid low power state that the power domain is allowed to go to. Based on work originally done by Jean Pihet <j-pihet@ti.com> https://patchwork.kernel.org/patch/1325091/ . There is no attempt to create a new powerdomain solution here, except fixing issues seen attempting invalid programming attempts. Future consolidation to the generic powerdomain framework should consider this requirement as well. Similar solutions have been done in product kernels in the past such as: https://android.googlesource.com/kernel/omap.git/+blame/android-omap-panda-3.0/arch/arm/mach-omap2/pm44xx.cSigned-off-by:
-
Nishanth Menon authored
No need to invoke callback when the clkdm pointer is NULL. Signed-off-by:
-
Nishanth Menon authored
Update the power domain power states for final production chip capability. OFF mode, OSWR etc have been descoped for various domains. Signed-off-by:
-
Nishanth Menon authored
DRA7 supports only CSWR for CPU, MPU power domains. Core power domain supports upto INA. Signed-off-by:
-
- 05 Sep, 2014 2 commits
-
-
Arnd Bergmann authored
Merge tag 'renesas-maintainers-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/fixes-non-critical Merge "Renesas ARM Based SoC Maintainers Updates for v3.18" from Simon Horman: * Remove genmai_defconfig from MAINTAINERS genmai_defconfig was removed in v3.17-rc1. Signed-off-by:
-
Paul Bolle authored
The Kconfig symbol PLAT_SPEAR_SINGLE briefly appeared during the v3.10 development cycle. It was removed in a merge commit before v3.10. A few references to it were left in the tree, probably because they didn't generate merge conflicts. Whatever it was, they're useless now and can safely be removed. Reported-by:
Martin Walch <walch.martin@web.de> Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Reviewed-by:
Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Rajeev Kumar <rajeev_kumar@mentor.com> Acked-by:
-
- 04 Sep, 2014 2 commits
-
-
Xia Kaixu authored
The kernel panic occurs when running an allmodconfig kernel on OMAP4460. The inicall "cns3xxx_pcie_init" does not check which hardware it's running on and just tries to access to its specific registers. Now call it from .init_late callback from the two machine descriptors. Signed-off-by:
Xia Kaixu <kaixu.xia@linaro.org> Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'davinci-for-v3.18/board' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/fixes-non-critical Merge "DaVinci board file fixes for v3.18" from Sekhar Nori: Some non-critcal fixes for DA850 EVM board file adding missing regulator information. * tag 'davinci-for-v3.18/board' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: board-da850-evm: Add needed regulators for tlv320aic3106 codec ARM: davinci: board-da850-evm: Mark dcdc2 of TPS65070 as always_on Signed-off-by:
-
- 03 Sep, 2014 1 commit
-
-
Nishanth Menon authored
Beaglebone white and beaglebone black differ in tiny little aspects. This is the reason why we maintain seperate dts for these platforms. However, there is no real way to decode from dtb which platform it is since compatible and model name are the same for both platforms. Fix this so that beaglebone black and beaglebone are identifiable, while maintaining compatibility for older zImages which might use old beaglebone compatible flag for black as well. Reported-by:
Tom Rini <trini@ti.com> Signed-off-by:
-
