- 31 Oct, 2012 1 commit
-
-
John Fastabend authored
The PF_BRIDGE:RTM_{GET|SET}LINK nlmsg family and type are currently embedded in the ./net/bridge module. This prohibits them from being used by other bridging devices. One example of this being hardware that has embedded bridging components. In order to use these nlmsg types more generically this patch adds two net_device_ops hooks. One to set link bridge attributes and another to dump the current bride attributes. ndo_bridge_setlink() ndo_bridge_getlink() CC: Lennert Buytenhek <buytenh@wantstofly.org> CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 28 Oct, 2012 8 commits
-
-
Bjørn Mork authored
Removes the warnings drivers/net/usb/sierra_net.c:343:45: warning: incorrect type in assignment (different base types) drivers/net/usb/sierra_net.c:343:45: expected unsigned short [unsigned] [short] [usertype] <noident> drivers/net/usb/sierra_net.c:343:45: got restricted __be16 [usertype] <noident> and drivers/net/usb/sierra_net.c:658:18: warning: cast to restricted __le16 Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Bjørn Mork authored
Fixes the sparse warning drivers/net/usb/cdc_ncm.c:836:9: warning: context imbalance in 'cdc_ncm_txpath_bh' - different lock contexts for basic block Signed-off-by:
-
Bjørn Mork authored
Probably doesn't matter much since the value is used as a boolean anyway, but it removes the sparse warning: drivers/net/usb/cdc_ncm.c:1090:32: warning: incorrect type in assignment (different base types) drivers/net/usb/cdc_ncm.c:1090:32: expected unsigned short [unsigned] [usertype] connected drivers/net/usb/cdc_ncm.c:1090:32: got restricted __le16 [usertype] wValue Signed-off-by:
-
Nicolas Dichtel authored
This message allows to get the devconf for an interface. Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Nicolas Dichtel authored
Signed-off-by:
-
Nicolas Dichtel authored
This message allows to get the devconf for an interface. Signed-off-by:
-
Nicolas Dichtel authored
Signed-off-by:
-
Nicolas Dichtel authored
A new type is added to allow userland to monitor protocol configuration, like IPv4 or IPv6. For example, monitoring the state of the forwarding status of an interface of the system. Signed-off-by:
-
- 26 Oct, 2012 24 commits
-
-
git://1984.lsi.us.es/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== The following changeset contains updates for IPVS from Jesper Dangaard Brouer that did not reach the previous merge window in time. More specifically, updates to improve IPv6 support in IPVS. More relevantly, some of the existing code performed wrong handling of the extensions headers and better fragmentation handling. Jesper promised more follow-up patches to refine this after this batch hits net-next. Yet to come. ==================== Signed-off-by: -
David S. Miller authored
Only the real implementation got updated. Signed-off-by: -
Alan Cox authored
Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Alan Cox authored
multi is assigned to 0 and then acts as a constant. Remove the dead code. Signed-off-by:
-
Daniel Wagner authored
The cgroup logic part of net_cls is very similar as the one in net_prio. Let's stream line the net_cls logic with the net_prio one. The net_prio update logic was changed by following commit (note there were some changes necessary later on) commit 406a3c63 Author: John Fastabend <john.r.fastabend@intel.com> Date: Fri Jul 20 10:39:25 2012 +0000 net: netprio_cgroup: rework update socket logic Instead of updating the sk_cgrp_prioidx struct field on every send this only updates the field when a task is moved via cgroup infrastructure. This allows sockets that may be used by a kernel worker thread to be managed. For example in the iscsi case today a user can put iscsid in a netprio cgroup and control traffic will be sent with the correct sk_cgrp_prioidx value set but as soon as data is sent the kernel worker thread isssues a send and sk_cgrp_prioidx is updated with the kernel worker threads value which is the default case. It seems more correct to only update the field when the user explicitly sets it via control group infrastructure. This allows the users to manage sockets that may be used with other threads. Since classid is now updated when the task is moved between the cgroups, we don't have to call sock_update_classid() from various places to ensure we always using the latest classid value. [v2: Use iterate_fd() instead of open coding] Signed-off-by:
Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Li Zefan <lizefan@huawei.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Joe Perches <joe@perches.com> Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Stanislav Kinsbursky <skinsbursky@parallels.com> Cc: Tejun Heo <tj@kernel.org> Cc: <netdev@vger.kernel.org> Cc: <cgroups@vger.kernel.org> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Daniel Wagner authored
sock_update_classid() assumes that the update operation always are applied on the current task. sock_update_classid() needs to know on which tasks to work on in order to be able to migrate task between cgroups using the struct cgroup_subsys attach() callback. Signed-off-by:
-
Daniel Wagner authored
As Eric pointed out: "Hey task_cls_classid() has its own rcu protection since commit 3fb5a991 (cls_cgroup: Fix rcu lockdep warning) So we can safely revert Paul commit (1144182a) (We no longer need rcu_read_lock/unlock here)" Signed-off-by:
-
Daniel Wagner authored
The classid type used throughout the kernel is u32. Signed-off-by:
-
Daniel Wagner authored
net_prio_attach() is only access via cgroup_subsys callbacks, therefore we can reduce the visibility of this function. Signed-off-by:
-
Ming Lei authored
Acked-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
-
Ming Lei authored
Acked-by:
-
Ming Lei authored
Acked-by:
-
Ming Lei authored
Acked-by:
-
Ming Lei authored
Acked-by:
-
Ming Lei authored
Acked-by:
-
Ming Lei authored
Acked-by:
-
Ming Lei authored
Acked-by:
-
Ming Lei authored
Acked-by:
-
Ming Lei authored
Acked-by:
-
Ming Lei authored
This patch introduces the below 3 usb command helpers: usbnet_read_cmd / usbnet_write_cmd / usbnet_write_cmd_async so that each low level driver doesn't need to implement them by itself, and the dma buffer allocation for usb transfer and runtime PM things can be handled just in one place. Acked-by:
-
Neil Horman authored
I've been messing with the code for a bit, and I figured Vlad could use a hand as interest in the protocol has picked up over the last year or so. I've asked him, and he doesn't seem too upset over the idea :) Signed-off-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Neil Horman authored
Currently sctp allows for the optional use of md5 of sha1 hmac algorithms to generate cookie values when establishing new connections via two build time config options. Theres no real reason to make this a static selection. We can add a sysctl that allows for the dynamic selection of these algorithms at run time, with the default value determined by the corresponding crypto library availability. This comes in handy when, for example running a system in FIPS mode, where use of md5 is disallowed, but SHA1 is permitted. Note: This new sysctl has no corresponding socket option to select the cookie hmac algorithm. I chose not to implement that intentionally, as RFC 6458 contains no option for this value, and I opted not to pollute the socket option namespace. Change notes: v2) * Updated subject to have the proper sctp prefix as per Dave M. * Replaced deafult selection options with new options that allow developers to explicitly select available hmac algs at build time as per suggestion by Vlad Y. Signed-off-by:
-
Daniel Borkmann authored
This tiny patch removes two unused err assignments. In those two cases the err variable is either overwritten with another value at a later point in time without having read the previous assigment, or it is assigned and the function returns without using/reading err after the assignment. Signed-off-by:
Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch> Signed-off-by:
-
hayeswang authored
Enable ALDPS function to save power when link down. Note that the feature should be set after the other PHY settings. And the firmware is necessary. Don't enable it without loading the firmware. None of the firmware-free chipsets support ALDPS. Neither do the RTL8168d/8111d. For 8136 series, make sure the ALDPS is disabled before loading the firmware. For 8168 series, the ALDPS would be disabled automatically when loading firmware. You must not disable it directly. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Acked-by:
Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
-
- 23 Oct, 2012 7 commits
-
-
Pavel Emelyanov authored
Make it simple -- just put new nlattr with just sk->sk_shutdown bits. Signed-off-by:
Pavel Emelyanov <xemul@parallels.com> Signed-off-by:
-
-
Nicolas Dichtel authored
Adding by commit 51ebd318 which adds the support of ECMP for IPv6. Spotted-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Padmanabh Ratnakar authored
FW flashing code, even though it works correctly, makes some hidden assumptions about buffer sizes. This is causing code analysers to report error. Cleanup FW flashing code to remove these hidden assumptions. Reported-by:
Yuanhan Liu <yuanhan.liu@intel.com> Signed-off-by:
Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by:
-
Hans Zhang authored
It's no needed to check the return value of tab since the NULL situation has been handled already, and the rtnl_msg_handlers[PF_UNSPEC] has been initialized as non-NULL during the rtnetlink_init(). Signed-off-by:
Hans Zhang <zhanghonghui@huawei.com> Signed-off-by:
-
Eric Dumazet authored
Use same header helpers than tcp_v6_early_demux() because they are a bit faster, and as they make IPv4/IPv6 versions look the same. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Neal Cardwell authored
Remove an icsk variable, which by convention should refer to an inet_connection_sock rather than an inet_sock. In the process, make the tcp_v6_early_demux() code and formatting a bit more like tcp_v4_early_demux(), to ease comparisons and maintenance. Signed-off-by:
-
