Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
	$ sed -e 's/^        /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

When only base config level is present, this tool is displaying TRL
(Turbo-ratio-limits) by reading legacy MSR. In this case, also present
core count for TRL by reading MSR 0x1AE.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

It is possible that certain config levels are not available, even
if the max level includes the level. There can be missing levels in
some platforms. So ignore the level when called for information dump
for all levels and fail if specifically ask for the missing level.

Here the changes is to continue reading information about other levels
even if we fail to get information for the current level. But use the
"processed" flag to indicate the failure. When the "processed" flag is
not set, don't dump information about that level.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add touchscreen info for the Jumper EZpad 6 m4 tablet.
Reported-and-tested-by: youling257 <youling257@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Since the tool now adds support for another Intel SST implementation,
increment version number.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Some firmware implementation gives error when a command is sent get mask
for core count 32-61. So use core count to decide.

But there is no function to get core count. So introduce one function to
get core count.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

There are some platforms, where there limited support of Intel(R) SST
features. Here perf-profile has only one base configuration and limited
support of commands. But still has support for discovery of base-freq and
turbo-freq features. So it is important to show minimum features to use
base-freq and turbo-freq features.

Here the change are:
- When there is no support of CONFIG_TDP_GET_LEVELS_INFO, then instead
of treating this as fatal error, treat this with number of config levels
= 0, that means only base level 0 is present.
- There is no support of mail box commands to get base frequencies or
turbo frequencies. Here present base frequency by reading cpufreq
base freq and turbo frequency by reading MSR 0x1AD.
- Don't display any field, which has value == 0.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Use different frequency weights for CLOS 0 and and CLOS1-3, to define
relative priority for power budgeting. This will be used for --auto
mode to enable base-freq and turbo-freq feature.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

To be consistant with the other frequency units, change the CLOS
unit to MHz instead of ratios.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Use mailbox to read/write CLOS_PM_QOS_CONFIG instead of read/write to
MMIO offset.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

There is an expectation in the CLX platform for SST base-freq feature that
Scaling min frequency be different for high and low priority cores.
This is the way the firmware will understand the priority.

So this change will look at high priority and low priority cores, and set
scaling_min_freq to P1High for high priority cores and P1Low to low
priority cores.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

In CLX_N base_frequency is read from cpufreq sysfs, where units are in
KHz. The internal units in the code matches the real ratios which are
in 100MHz scale. So when storing units for CLX-N frequencies, convert
to 100MHz scale.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Make the avx level display consistent. Except for "turbo-ratio-limits-avx",
everywhere else it is avx2. So change "turbo-ratio-limits-avx"
to "turbo-ratio-limits-avx2".
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add support for uncore P0, uncore P1, P1 for base and AVX levels and
memory frequency. These commands are optional, so continue on
failure.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add touchscreen platform data for the Schneider SCT101CTM tablet
Signed-off-by: Daniel Gorbea <danielgorbea@hotmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

We need to convert all old gpio irqchips to pass the irqchip
setup along when adding the gpio_chip. For more info see
drivers/gpio/TODO.

For chained irqchips this is a pretty straight-forward
conversion. This driver requests the IRQ directly in the driver
so it needs to pass a NULL parent handler. We may revisit this
code later and pull reqular shared IRQ handler into
gpiolib, so leave a FIXME.

Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

There is no need to have a label to return an error code in one case.
Moreover the other places in the same function do not utilize that label.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Use devm_platform_ioremap_resource() to simplify the code a bit.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

battery_lock mutex is never used and not needed.

Fixes: 355a070b ("platform/x86: huawei-wmi: Add battery charging thresholds")
Signed-off-by: Ayman Bagabas <ayman.bagabas@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

No need to check for battery name, we already check if the WMI function is
available in huawei_wmi_battery_setup.

Fixes: 355a070b ("platform/x86: huawei-wmi: Add battery charging thresholds")
Signed-off-by: Ayman Bagabas <ayman.bagabas@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Check if battery thresholds are within 0 and 100.

Fixes: 355a070b ("platform/x86: huawei-wmi: Add battery charging thresholds")
Signed-off-by: Ayman Bagabas <ayman.bagabas@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Rename Peter Feuerer to Peter Kaestle.

Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Peter Kaestle <peter@piie.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add support for Acer Aspire 7551.

Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Signed-off-by: Peter Feuerer <peter@piie.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add functionality for base-freq info|enable|disable info on CascadeLake-N.

Sample output:
Intel(R) Speed Select Technology
Executing on CPU model:85[0x55]
 package-0
  die-0
    cpu-0
      speed-select-base-freq
        high-priority-base-frequency(MHz):2700000
        high-priority-cpu-mask:00000000,0000e8c0
        high-priority-cpu-list:6,7,11,13,14,15
        low-priority-base-frequency(MHz):2100000
 package-1
  die-0
    cpu-20
      speed-select-base-freq
        high-priority-base-frequency(MHz):2700000
        high-priority-cpu-mask:0000000e,8c000000
        high-priority-cpu-list:26,27,31,33,34,35
        low-priority-base-frequency(MHz):2100000

The enable command always returns success, and the disable command always
returns failed because SST-BF cannot be enabled or disabled from the OS on
CascadeLake-N.

Enable command also have support for --auto|-a option, which sets cpufreq
scaling_min to max, so that the high priority base frequency can be the
required minimum for high priority cores. Disable command with -a/--auto
option reset the setting back to the min frequency.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add functionality for "perf-profile info" on CascadeLake-N.

Sample output:
intel-speed-select perf-profile info
Intel(R) Speed Select Technology
Executing on CPU model:85[0x55]
 package-0
  die-0
    cpu-0
      perf-profile-level-0
        cpu-count:20
        enable-cpu-mask:00000000,000fffff
        enable-cpu-list:0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
        thermal-design-power-ratio:23
        base-frequency(MHz):2300
        speed-select-turbo-freq:unsupported
        speed-select-base-freq:enabled
        speed-select-base-freq
          high-priority-base-frequency(MHz):2700000
          high-priority-cpu-mask:00000000,0000e8c0
          high-priority-cpu-list:6,7,11,13,14,15
          low-priority-base-frequency(MHz):2100000
 package-1
  die-0
    cpu-20
      perf-profile-level-0
        cpu-count:20
        enable-cpu-mask:000000ff,fff00000
        enable-cpu-list:20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39
        thermal-design-power-ratio:23
        base-frequency(MHz):2300
        speed-select-turbo-freq:unsupported
        speed-select-base-freq:enabled
        speed-select-base-freq
          high-priority-base-frequency(MHz):2700000
          high-priority-cpu-mask:0000000e,8c000000
          high-priority-cpu-list:26,27,31,33,34,35
          low-priority-base-frequency(MHz):2100000
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

CascadeLake-N only supports SST-BF and needs some of the perf-profile
commands, and the base-freq commands.

Add help functions, and create an empty command structures (the functions
will be implemented later in this patchset).  Call these functions
when running on CascadeLake-N.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Three CascadeLake-N models (6252N, 6230N, and 5218N) have SST-PBF support.

Return an error if the CascadeLake processor is not one of these specific
models.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Make the process_command take any help command and command list.  This
will make it easier to help commands and a command list for CascadeLake-N.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The current code structure has similar but separate command functions for
the enable and disable operations.  This can be improved by adding an int
argument to the command function structure, and interpreting 1 as enable
and 0 as disable.  This change results in the removal of the disable
command functions.

Add int argument to the command function structure.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The turbo-freq feature is dependent on the core-power feature. If the
core-power feature is disabled while the turbo-freq feature is enabled,
this will break the turbo-freq feature. This is a firmware limitation,
where they can't return error under this scenario.

So when trying to disable core-power, make sure that the turbo-freq
feature is not enabled. If it enabled, return error if user is trying to
disable the core-power feature.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Introduce --auto|-a option to turbo-freq enable feature, so that it
does in one step for users who are OK by setting all passed target cores
as high priority and set in CLOS 0 and remaining in CLOS 3. In this way,
users don't have to take multiple steps to enable turbo-freq feature. For
users who want more fine grain control, they can always use core-power
feature to set custom CLOS configuration and assignment.

While here also print the error to output when clos configuration fails.

For example
intel-speed-select -c 0-4 turbo-freq enable --auto

The above command will enable turbo-freq and core-power feature. Also
mark CPU 0 to CPU 4 as high priority.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Introduce --auto|-a option to base-freq enable feature, so that it
does in one step for users who are OK by setting all cores with higher
base frequency to be set in CLOS 0 and remaining in CLOS 3. This option
also sets corresponding clos.min to CLOS 0 and CLOS3. In this way, users
don't have to take multiple steps to enable base-freq feature. For users
who want more fine grain control, they can always use core-power feature
to set custom CLOS configuration and assignment.

Also adjust cpufreq/scaling_min_freq for higher and lower priority cores.

For example user can use:
intel-speed-select base-freq enable --auto
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Fix warning for:
isst-config.c: In function ‘set_cpu_online_offline’:
isst-config.c:221:3: warning: ignoring return value of ‘write’,
declared with attribute warn_unused_result [-Wunused-result]
   write(fd, "1\n", 2);
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add System76 ACPI driver, which adds support for Fn-Fx key
combinations, keyboard backlight, and airplane mode LEDs
on System76 laptops running open source firmware.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Cc: platform-driver-x86@vger.kernel.org
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This was supposed to be precision "%.*s" instead of width "%*s".  It's
possible that this results in printing beyond the end of the string.

Fixes: a970b95345ab ("platform/x86: huawei-wmi: Add debugfs support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

There is no need to access global variable directly when we may derive it
through other means.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

There is no need to keep a pointer to the platform device. Currently there are
no users of it directly, and if there will be in the future we may restore it
from pointer to the struct device.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

We have to clean memory resources allocated during init.

Fixes: 7532afb35012 ("platform/x86: huawei-wmi: Move to platform driver")
Cc: Ayman Bagabas <ayman.bagabas@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Fixes: 7532afb35012 ("platform/x86: huawei-wmi: Move to platform driver")
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

For APIC case of interrupt we don't fail a ->probe() of the driver,
which makes kernel to print a lot of warnings from the children.

We have two options here:
- switch to platform_get_irq_optional(), though it won't stop children
  to be probed and failed
- fail the ->probe() of i2c-multi-instantiate

Since the in reality we never had devices in the wild where IRQ resource
is optional, the latter solution suits the best.

Fixes: 799d3379 ("platform/x86: i2c-multi-instantiate: Introduce IOAPIC IRQ support")
Reported-by: Ammy Yi <ammy.yi@intel.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>